Merge tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung into clk-next

Pull samsung clk driver updates from Sylwester Nawrocki:

In addition to a few clean up and code consolidation patches this
includes:
- addition of sound subsystem related clocks for Exynos5410 SoC
  (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock"
  compatible in the clk-exynos-audss driver,
- addition of DRAM controller related clocks for exynos5420,
- MAINTAINERS update adding Chanwoo Choi as the Samsung SoC
  clock drivers co-maintainer.

* tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung:
  clk: samsung: Add support for EPLL on exynos5410
  clk: samsung: clk-exynos-audss: Whitespace and debug trace cleanup
  clk: samsung: clk-exynos-audss: Add exynos5410 compatible
  clk: samsung: clk-exynos-audss: controller variant handling rework
  clk: samsung: Use common registration function for pll2550x
  clk: samsung: exynos5410: Expose the peripheral DMA gate clocks
  clk: samsung: exynos5420: Add clocks for CMU_CDREX domain
  clk: samsung: exynos5410: Use samsung_cmu_register_one() to simplify code
  clk: samsung: exynos5260: Move struct samsung_cmu_info to init section
  MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer
  clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks
  clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)

Documentation/devicetree/bindings/clock/clk-exynos-audss.txt

@@ -10,6 +10,8 @@ Required Properties:
   - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
   - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
     SoCs.
+  - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410
+    SoCs.
   - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
     SoCs.
 - reg: physical base address and length of the controller's register set.
@@ -91,5 +93,5 @@ i2s0: i2s@03830000 {
 		<&clock_audss EXYNOS_MOUT_AUDSS>,
 		<&clock_audss EXYNOS_MOUT_I2S>;
 	clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
-	"mout_audss", "mout_i2s";
+		      "mout_audss", "mout_i2s";
 };

Documentation/devicetree/bindings/clock/exynos5410-clock.txt

@@ -12,24 +12,29 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
+- clocks: should contain an entry specifying the root clock from external
+  oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+  defined using standard clock bindings with "fin_pll" clock-output-name.
+  That clock is being passed internally to the 9 PLLs.
+
 All available clocks are defined as preprocessor macros in
 dt-bindings/clock/exynos5410.h header and can be used in device
 tree sources.
 
-External clock:
-
-There is clock that is generated outside the SoC. It
-is expected that it is defined using standard clock bindings
-with following clock-output-name:
-
- - "fin_pll" - PLL input clock from XXTI
-
 Example 1: An example of a clock controller node is listed below.
 
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
 	clock: clock-controller@0x10010000 {
 		compatible = "samsung,exynos5410-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;
+		clocks = <&fin_pll>;
 	};
 
 Example 2: UART controller node that consumes the clock generated by the clock