hwmon: Add Gateworks System Controller support

The Gateworks System Controller has a hwmon sub-component that exposes
up to 16 ADC's, some of which are temperature sensors, others which are
voltage inputs. The ADC configuration (register mapping and name) is
configured via device-tree and varies board to board.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Documentation/hwmon/gsc-hwmon.rst

@@ -0,0 +1,53 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver gsc-hwmon
+=======================
+
+Supported chips: Gateworks GSC
+Datasheet: http://trac.gateworks.com/wiki/gsc
+Author: Tim Harvey <tharvey@gateworks.com>
+
+Description:
+------------
+
+This driver supports hardware monitoring for the temperature sensor,
+various ADC's connected to the GSC, and optional FAN controller available
+on some boards.
+
+
+Voltage Monitoring
+------------------
+
+The voltage inputs are scaled either internally or by the driver depending
+on the GSC version and firmware. The values returned by the driver do not need
+further scaling. The voltage input labels provide the voltage rail name:
+
+inX_input                  Measured voltage (mV).
+inX_label                  Name of voltage rail.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are measured with 12-bit or 10-bit resolution and are scaled
+either internally or by the driver depending on the GSC version and firmware.
+The values returned by the driver reflect millidegree Celcius:
+
+tempX_input                Measured temperature.
+tempX_label                Name of temperature input.
+
+
+PWM Output Control
+------------------
+
+The GSC features 1 PWM output that operates in automatic mode where the
+PWM value will be scalled depending on 6 temperature boundaries.
+The tempeature boundaries are read-write and in millidegree Celcius and the
+read-only PWM values range from 0 (off) to 255 (full speed).
+Fan speed will be set to minimum (off) when the temperature sensor reads
+less than pwm1_auto_point1_temp and maximum when the temperature sensor
+equals or exceeds pwm1_auto_point6_temp.
+
+pwm1_auto_point[1-6]_pwm       PWM value.
+pwm1_auto_point[1-6]_temp      Temperature boundary.
+

Documentation/hwmon/index.rst

@@ -60,6 +60,7 @@ Hardware Monitoring Kernel Drivers
    ftsteutates
    g760a
    g762
+   gsc-hwmon
    gl518sm
    hih6130
    ibmaem