Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here's the powerpc batch for this merge window.  Some of the
  highlights are:

   - A bunch of endian fixes ! We don't have full LE support yet in that
     release but this contains a lot of fixes all over arch/powerpc to
     use the proper accessors, call the firmware with the right endian
     mode, etc...

   - A few updates to our "powernv" platform (non-virtualized, the one
     to run KVM on), among other, support for bridging the P8 LPC bus
     for UARTs, support and some EEH fixes.

   - Some mpc51xx clock API cleanups in preparation for a clock API
     overhaul

   - A pile of cleanups of our old math emulation code, including better
     support for using it to emulate optional FP instructions on
     embedded chips that otherwise have a HW FPU.

   - Some infrastructure in selftest, for powerpc now, but could be
     generalized, initially used by some tests for our perf instruction
     counting code.

   - A pile of fixes for hotplug on pseries (that was seriously
     bitrotting)

   - The usual slew of freescale embedded updates, new boards, 64-bit
     hiberation support, e6500 core PMU support, etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc: Correct FSCR bit definitions
  powerpc/xmon: Fix printing of set of CPUs in xmon
  powerpc/pseries: Move lparcfg.c to platforms/pseries
  powerpc/powernv: Return secondary CPUs to firmware on kexec
  powerpc/btext: Fix CONFIG_PPC_EARLY_DEBUG_BOOTX on ppc32
  powerpc: Cleanup handling of the DSCR bit in the FSCR register
  powerpc/pseries: Child nodes are not detached by dlpar_detach_node
  powerpc/pseries: Add mising of_node_put in delete_dt_node
  powerpc/pseries: Make dlpar_configure_connector parent node aware
  powerpc/pseries: Do all node initialization in dlpar_parse_cc_node
  powerpc/pseries: Fix parsing of initial node path in update_dt_node
  powerpc/pseries: Pack update_props_workarea to map correctly to rtas buffer header
  powerpc/pseries: Fix over writing of rtas return code in update_dt_node
  powerpc/pseries: Fix creation of loop in device node property list
  powerpc: Skip emulating & leave interrupts off for kernel program checks
  powerpc: Add more exception trampolines for hypervisor exceptions
  powerpc: Fix location and rename exception trampolines
  powerpc: Add more trap names to xmon
  powerpc/pseries: Add a warning in the case of cross-cpu VPA registration
  powerpc: Update the 00-Index in Documentation/powerpc
  ...

Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt

@@ -1,21 +1,20 @@
 * Freescale MSI interrupt controller
 
 Required properties:
-- compatible : compatible list, contains 2 entries,
-  first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
-  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
-  the parent type.
+- compatible : compatible list, may contain one or two entries
+  The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+  "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+  version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+  provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+  should be used. The first entry is optional; the second entry is
+  required.
 
 - reg : It may contain one or two regions. The first region should contain
   the address and the length of the shared message interrupt register set.
-  The second region should contain the address of aliased MSIIR register for
-  platforms that have such an alias.
-
-- msi-available-ranges: use <start count> style section to define which
-  msi interrupt can be used in the 256 msi interrupts. This property is
-  optional, without this, all the 256 MSI interrupts can be used.
-  Each available range must begin and end on a multiple of 32 (i.e.
-  no splitting an individual MSI register or the associated PIC interrupt).
+  The second region should contain the address of aliased MSIIR or MSIIR1
+  register for platforms that have such an alias, if using MSIIR1, the second
+  region must be added because different MSI group has different MSIIR1 offset.
 
 - interrupts : each one of the interrupts here is one entry per 32 MSIs,
   and routed to the host interrupt controller. the interrupts should
@@ -28,6 +27,14 @@ Required properties:
   to MPIC.
 
 Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+  msi interrupt can be used in the 256 msi interrupts. This property is
+  optional, without this, all the MSI interrupts can be used.
+  Each available range must begin and end on a multiple of 32 (i.e.
+  no splitting an individual MSI register or the associated PIC interrupt).
+  MPIC v4.3 does not support this property because the 32 interrupts of an
+  individual register are not continuous when using MSIIR1.
+
 - msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
   is used for MSI messaging.  The address of MSIIR in PCI address space is
   the MSI message address.
@@ -54,6 +61,28 @@ Example:
 		interrupt-parent = <&mpic>;
 	};
 
+	msi@41600 {
+		compatible = "fsl,mpic-msi-v4.3";
+		reg = <0x41600 0x200 0x44148 4>;
+		interrupts = <
+			0xe0 0 0 0
+			0xe1 0 0 0
+			0xe2 0 0 0
+			0xe3 0 0 0
+			0xe4 0 0 0
+			0xe5 0 0 0
+			0xe6 0 0 0
+			0xe7 0 0 0
+			0x100 0 0 0
+			0x101 0 0 0
+			0x102 0 0 0
+			0x103 0 0 0
+			0x104 0 0 0
+			0x105 0 0 0
+			0x106 0 0 0
+			0x107 0 0 0>;
+	};
+
 The Freescale hypervisor and msi-address-64
 -------------------------------------------
 Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The