sh: Board updates for I/O routine rework.

This updates the various boards for some of the recent I/O routine
updates.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/renesas/systemh/io.c

@@ -10,11 +10,10 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <asm/systemh/7751systemh.h>
+#include <linux/pci.h>
+#include <asm/systemh7751.h>
 #include <asm/addrspace.h>
 #include <asm/io.h>
-
-#include <linux/pci.h>
 #include "../../../drivers/pci/pci-sh7751.h"
 
 /*
@@ -31,11 +30,6 @@
 #define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
 #define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area
                                                 of smc lan chip*/
-
-#define maybebadio(name,port) \
-  printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
 static inline void delay(void)
 {
 	ctrl_inw(0xa0000000);
@@ -46,11 +40,7 @@ port2adr(unsigned int port)
 {
 	if (port >= 0x2000)
 		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#if 0
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-#endif
-	maybebadio(name,(unsigned long)port);
+	maybebadio((unsigned long)port);
 	return (volatile __u16*)port;
 }
 
@@ -111,7 +101,7 @@ unsigned short sh7751systemh_inw(unsigned long port)
 	else if (port <= 0x3F1)
 		return *(volatile unsigned int *)ETHER_IOMAP(port);
 	else
-		maybebadio(inw, port);
+		maybebadio(port);
 	return 0;
 }
 
@@ -126,7 +116,7 @@ unsigned int sh7751systemh_inl(unsigned long port)
 	else if (port <= 0x3F1)
 		return *(volatile unsigned int *)ETHER_IOMAP(port);
 	else
-		maybebadio(inl, port);
+		maybebadio(port);
 	return 0;
 }
 
@@ -167,7 +157,7 @@ void sh7751systemh_outw(unsigned short value, unsigned long port)
 	else if (port <= 0x3F1)
 		*(volatile unsigned short *)ETHER_IOMAP(port) = value;
 	else
-		maybebadio(outw, port);
+		maybebadio(port);
 }
 
 void sh7751systemh_outl(unsigned int value, unsigned long port)
@@ -177,7 +167,7 @@ void sh7751systemh_outl(unsigned int value, unsigned long port)
 	else if (CHECK_SH7751_PCIIO(port))
         	*((unsigned long*)PCI_IOMAP(port)) = value;
 	else
-		maybebadio(outl, port);
+		maybebadio(port);
 }
 
 void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count)
@@ -194,7 +184,7 @@ void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count)
 
 void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count)
 {
-	maybebadio(insl, port);
+	maybebadio(port);
 }
 
 void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count)
@@ -211,73 +201,5 @@ void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long cou
 
 void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count)
 {
-	maybebadio(outsw, port);
-}
-
-/* For read/write calls, just copy generic (pass-thru); PCIMBR is  */
-/* already set up.  For a larger memory space, these would need to */
-/* reset PCIMBR as needed on a per-call basis...                   */
-
-unsigned char sh7751systemh_readb(unsigned long addr)
-{
-	return *(volatile unsigned char*)addr;
-}
-
-unsigned short sh7751systemh_readw(unsigned long addr)
-{
-	return *(volatile unsigned short*)addr;
-}
-
-unsigned int sh7751systemh_readl(unsigned long addr)
-{
-	return *(volatile unsigned long*)addr;
-}
-
-void sh7751systemh_writeb(unsigned char b, unsigned long addr)
-{
-	*(volatile unsigned char*)addr = b;
-}
-
-void sh7751systemh_writew(unsigned short b, unsigned long addr)
-{
-	*(volatile unsigned short*)addr = b;
-}
-
-void sh7751systemh_writel(unsigned int b, unsigned long addr)
-{
-        *(volatile unsigned long*)addr = b;
-}
-
-
-
-/* Map ISA bus address to the real address. Only for PCMCIA.  */
-
-/* ISA page descriptor.  */
-static __u32 sh_isa_memmap[256];
-
-#if 0
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
-	int idx;
-
-	if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
-		return -1;
-
-	idx = start >> 12;
-	sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-	printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
-	       start, length, offset, idx, sh_isa_memmap[idx]);
-	return 0;
-}
-#endif
-
-unsigned long
-sh7751systemh_isa_port2addr(unsigned long offset)
-{
-	int idx;
-
-	idx = (offset >> 12) & 0xff;
-	offset &= 0xfff;
-	return sh_isa_memmap[idx] + offset;
+	maybebadio(port);
 }

arch/sh/boards/renesas/systemh/irq.c

@@ -15,7 +15,7 @@
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <asm/io.h>
-#include <asm/mach/7751systemh.h>
+#include <asm/systemh7751.h>
 #include <asm/smc37c93x.h>
 
 /* address of external interrupt mask register

arch/sh/boards/renesas/systemh/setup.c

@@ -15,9 +15,8 @@
  * for more details.
  */
 #include <linux/init.h>
-#include <asm/mach/7751systemh.h>
-#include <asm/mach/io.h>
 #include <asm/machvec.h>
+#include <asm/systemh7751.h>
 
 extern void make_systemh_irq(unsigned int irq);
 
@@ -31,8 +30,6 @@ const char *get_system_type(void)
  */
 void __init init_7751systemh_IRQ(void)
 {
-/*  	make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); LAN */
-/*  	make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-4); */
 	make_systemh_irq(0xb);	/* Ethernet interrupt */
 }
 
@@ -60,15 +57,6 @@ struct sh_machine_vector mv_7751systemh __initmv = {
 	.mv_outsw		= sh7751systemh_outsw,
 	.mv_outsl		= sh7751systemh_outsl,
 
-	.mv_readb		= sh7751systemh_readb,
-	.mv_readw		= sh7751systemh_readw,
-	.mv_readl		= sh7751systemh_readl,
-	.mv_writeb		= sh7751systemh_writeb,
-	.mv_writew		= sh7751systemh_writew,
-	.mv_writel		= sh7751systemh_writel,
-
-	.mv_isa_port2addr	= sh7751systemh_isa_port2addr,
-
 	.mv_init_irq		= init_7751systemh_IRQ,
 };
 ALIAS_MV(7751systemh)