powerpc/85xx: introduce support for the Freescale / iVeia P1022RDK
The Freescale / iVeia P1022RDK reference board is a small-factor board with a Freescale P1022 SOC. It includes: 1) 512 MB 64-bit DDR3-800 (max) memory 2) 8MB SPI serial flash memory for boot loader 3) Bootable 4-bit SD/MMC port 4) Two 10/100/1000 Ethernet connectors 5) One SATA port 6) Two USB ports 7) One PCIe x4 slot 8) DVI video connector 9) Audio input and output jacks, powered by a Wolfson WM8960 codec. Unlike the P1022DS, the P1022RDK does not have any localbus devices, presumably because of the localbus / DIU multiplexing restriction of the P1022 SOC. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Timur Tabi
188
arch/powerpc/boot/dts/p1022rdk.dts
Normal file
188
arch/powerpc/boot/dts/p1022rdk.dts
Normal file
@@ -0,0 +1,188 @@
|
||||
/*
|
||||
* P1022 RDK 32-bit Physical Address Map Device Tree Source
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "fsl/p1022si-pre.dtsi"
|
||||
/ {
|
||||
model = "fsl,P1022RDK";
|
||||
compatible = "fsl,P1022RDK";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
board_lbc: lbc: localbus@ffe05000 {
|
||||
/* The P1022 RDK does not have any localbus devices */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
board_soc: soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
i2c@3100 {
|
||||
wm8960:codec@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
/* MCLK source is a stand-alone oscillator */
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
rtc@68 {
|
||||
compatible = "stm,m41t62";
|
||||
reg = <0x68>;
|
||||
};
|
||||
adt7461@4c{
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
zl6100@21{
|
||||
compatible = "isil,zl6100";
|
||||
reg = <0x21>;
|
||||
};
|
||||
zl6100@24{
|
||||
compatible = "isil,zl6100";
|
||||
reg = <0x24>;
|
||||
};
|
||||
zl6100@26{
|
||||
compatible = "isil,zl6100";
|
||||
reg = <0x26>;
|
||||
};
|
||||
zl6100@29{
|
||||
compatible = "isil,zl6100";
|
||||
reg = <0x29>;
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,m25p80";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
partition@0 {
|
||||
label = "full-spi-flash";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ssi@15000 {
|
||||
fsl,mode = "i2s-slave";
|
||||
codec-handle = <&wm8960>;
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
usb@23000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupts = <9 1 0 0>;
|
||||
reg = <0x2>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@b0000 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
ethernet@b1000 {
|
||||
phy-handle = <&phy1>;
|
||||
tbi-handle = <&tbi0>;
|
||||
phy-connection-type = "sgmii";
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
reg = <0x0 0xffe09000 0 0x1000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0b000 {
|
||||
ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
reg = <0 0xffe0b000 0 0x1000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/p1022si-post.dtsi"
|
||||
Reference in New Issue
Block a user