docs: Fix more broken references
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked that produced results are valid. Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
Mauro Carvalho Chehab
@@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
|
||||
Each subnode should use the binding described in [2]..[7]
|
||||
|
||||
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
|
||||
[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
|
||||
[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
|
||||
[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
|
||||
[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
|
||||
[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
|
||||
[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
|
||||
[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
|
||||
|
||||
|
||||
Required properties:
|
||||
|
||||
@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
|
||||
that is used.
|
||||
|
||||
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
[2] Documentation/devicetree/bindings/clock/gate-clock.txt
|
||||
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
|
||||
[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
|
||||
|
||||
Required properties:
|
||||
|
||||
@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
|
||||
clock) and hardware autoidle enable / disable.
|
||||
|
||||
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
[2] Documentation/devicetree/bindings/clock/gate-clock.txt
|
||||
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
|
||||
|
||||
Required properties:
|
||||
- compatible : shall be one of:
|
||||
|
||||
@@ -8,7 +8,7 @@ Required properties:
|
||||
"intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
|
||||
source (usually MAINPLL) when the original CPU PLL is under
|
||||
transition and not stable yet.
|
||||
Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
|
||||
Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
|
||||
generic clock consumer properties.
|
||||
- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
|
||||
for detail.
|
||||
|
||||
@@ -12,7 +12,7 @@ Required properties:
|
||||
- clocks: Phandles for clock specified in "clock-names" property
|
||||
- clock-names : The name of clock used by the DFI, must be
|
||||
"pclk_ddr_mon";
|
||||
- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
|
||||
- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt
|
||||
for details.
|
||||
- center-supply: DMC supply node.
|
||||
- status: Marks the node enabled/disabled.
|
||||
|
||||
@@ -34,7 +34,7 @@ Optional properties:
|
||||
- mali-supply : Phandle to regulator for the Mali device. Refer to
|
||||
Documentation/devicetree/bindings/regulator/regulator.txt for details.
|
||||
|
||||
- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
|
||||
- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
|
||||
for details.
|
||||
|
||||
|
||||
|
||||
@@ -44,7 +44,7 @@ Optional properties:
|
||||
|
||||
- memory-region:
|
||||
Memory region to allocate from, as defined in
|
||||
Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
|
||||
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
|
||||
|
||||
- mali-supply:
|
||||
Phandle to regulator for the Mali device, as defined in
|
||||
|
||||
@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
|
||||
It is interfaced to host controller using SPI interface by a proprietary hardware
|
||||
called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
|
||||
See the following for pwarp node definitions:
|
||||
Documentation/devicetree/bindings/soc/pwrap.txt
|
||||
Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
|
||||
|
||||
This document describes the binding for MFD device and its sub module.
|
||||
|
||||
|
||||
@@ -9,7 +9,7 @@ Required properties:
|
||||
|
||||
The prcm node may contain several subdevices definitions:
|
||||
- see Documentation/devicetree/clk/sunxi.txt for clock devices
|
||||
- see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
|
||||
- see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
|
||||
controller devices
|
||||
|
||||
|
||||
|
||||
@@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
|
||||
rest of the gpios (depending on the bus-width property) are the data lines in
|
||||
no particular order. The format of the gpio specifier depends on the gpio
|
||||
controller.
|
||||
(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
|
||||
(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
|
||||
|
||||
Example:
|
||||
|
||||
|
||||
@@ -6,7 +6,7 @@ Required properties:
|
||||
- compatible: For external switch chips, compatible string must be exactly one
|
||||
of: "microchip,ksz9477"
|
||||
|
||||
See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
|
||||
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
|
||||
required and optional properties.
|
||||
|
||||
Examples:
|
||||
|
||||
@@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:
|
||||
- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
|
||||
"cpu".
|
||||
|
||||
See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
|
||||
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
|
||||
required, optional properties and how the integrated switch subnodes must
|
||||
be specified.
|
||||
|
||||
|
||||
@@ -14,7 +14,7 @@ Required properties:
|
||||
datasheet
|
||||
- interrupts: Should contain one interrupt specifier for the GPC interrupt
|
||||
- clocks: Must contain an entry for each entry in clock-names.
|
||||
See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
|
||||
See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
|
||||
- clock-names: Must include the following entries:
|
||||
- ipg
|
||||
|
||||
|
||||
@@ -22,7 +22,7 @@ List of legacy properties and respective binding document
|
||||
3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt
|
||||
4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
|
||||
Documentation/devicetree/bindings/mfd/tc3589x.txt
|
||||
Documentation/devicetree/bindings/input/ads7846.txt
|
||||
Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
|
||||
5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
|
||||
6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt
|
||||
7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
|
||||
|
||||
@@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
|
||||
the node is not important. The content of the node is defined in dwc3.txt.
|
||||
|
||||
Phy documentation is provided in the following places:
|
||||
Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
|
||||
Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
|
||||
|
||||
Example device nodes:
|
||||
|
||||
|
||||
Reference in New Issue
Block a user