Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon changes for v3.4 from Guenter Roeck:
 "Mostly cleanup.  No new drivers this time around, but support for
  several chips added to existing drivers: TPS40400, TPS40422, MTD040,
  MAX34446, ZL9101M, ZL9117M, and LM96080.  Also, added watchdog support
  for SCH56xx, and additional attributes for a couple of drivers."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (137 commits)
  hwmon: (sch56xx) Add support for the integrated watchdog (v2)
  hwmon: (w83627ehf) Add support for temperature offset registers
  hwmon: (jc42) Remove unnecessary device IDs
  hwmon: (zl6100) Add support for ZL9101M and ZL9117M
  hwmon: (adm1275) Add support for ADM1075
  hwmon: (max34440) Add support for MAX34446
  hwmon: (pmbus) Add more virtual registers
  hwmon: (pmbus) Add support for Lineage Power MDT040
  hwmon: (pmbus) Add support for TI TPS40400 and TPS40422
  hwmon: (max34440) Add support for 'lowest' output voltage attribute
  hwmon: (jc42) Convert to use devm_kzalloc
  hwmon: (max16065) Convert to use devm_kzalloc
  hwmon: (smm665) Convert to use devm_kzalloc
  hwmon: (ltc4261) Convert to use devm_kzalloc
  hwmon: (pmbus) Simplify remove functions
  hwmon: (pmbus) Convert pmbus drivers to use devm_kzalloc
  hwmon: (lineage-pem) Convert to use devm_kzalloc
  hwmon: (hwmon-vid) Fix checkpatch issues
  hwmon: (hwmon-vid) Add new entries to VRM model table
  hwmon: (lm80) Add detection of NatSemi/TI LM96080
  ...

Documentation/hwmon/adm1275

@@ -2,6 +2,10 @@ Kernel driver adm1275
 =====================
 
 Supported chips:
+  * Analog Devices ADM1075
+    Prefix: 'adm1075'
+    Addresses scanned: -
+    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
   * Analog Devices ADM1275
     Prefix: 'adm1275'
     Addresses scanned: -
@@ -17,13 +21,13 @@ Author: Guenter Roeck <guenter.roeck@ericsson.com>
 Description
 -----------
 
-This driver supports hardware montoring for Analog Devices ADM1275 and ADM1276
-Hot-Swap Controller and Digital Power Monitor.
+This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
+and ADM1276 Hot-Swap Controller and Digital Power Monitor.
 
-ADM1275 and ADM1276 are hot-swap controllers that allow a circuit board to be
-removed from or inserted into a live backplane. They also feature current and
-voltage readback via an integrated 12-bit analog-to-digital converter (ADC),
-accessed using a PMBus interface.
+ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
+board to be removed from or inserted into a live backplane. They also feature
+current and voltage readback via an integrated 12-bit analog-to-digital
+converter (ADC), accessed using a PMBus interface.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -36,6 +40,10 @@ This driver does not auto-detect devices. You will have to instantiate the
 devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
+The ADM1075, unlike many other PMBus devices, does not support internal voltage
+or current scaling. Reported voltages, currents, and power are raw measurements,
+and will typically have to be scaled.
+
 
 Platform data support
 ---------------------
@@ -51,7 +59,8 @@ The following attributes are supported. Limits are read-write, history reset
 attributes are write-only, all other attributes are read-only.
 
 in1_label		"vin1" or "vout1" depending on chip variant and
-			configuration.
+			configuration. On ADM1075, vout1 reports the voltage on
+			the VAUX pin.
 in1_input		Measured voltage.
 in1_min			Minimum Voltage.
 in1_max			Maximum voltage.
@@ -74,3 +83,10 @@ curr1_crit		Critical maximum current. Depending on the chip
 curr1_crit_alarm	Critical current high alarm.
 curr1_highest		Historical maximum current.
 curr1_reset_history	Write any value to reset history.
+
+power1_label		"pin1"
+power1_input		Input power.
+power1_reset_history	Write any value to reset history.
+
+			Power attributes are supported on ADM1075 and ADM1276
+			only.