xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Rozštěpit 0
Zdrojový kód Úkoly Pull requesty Akce Balíčky Projekty Vydání Wiki Aktivita

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

Procházet zdrojové kódy 
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits)
  ARM: Update (and cut down) mach-types
  ARM: 6771/1: vexpress: add support for multiple core tiles
  ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings
  ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig
  ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception
  ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime
  ARM: pgtable: add pud-level code
  ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks
  ARM: Use long long format when printing meminfo physical addresses
  ARM: integrator: add Integrator/CP sched_clock support
  ARM: realview/vexpress: consolidate SMP bringup code
  ARM: realview/vexpress: consolidate localtimer support
  ARM: integrator/versatile: consolidate FPGA IRQ handling code
  ARM: rationalize versatile family Kconfig/Makefile
  ARM: realview: remove old AMBA device DMA definitions
  ARM: versatile: remove old AMBA device DMA definitions
  ARM: vexpress: use new init_early for clock tree and sched_clock init
  ARM: realview: use new init_early for clock tree and sched_clock init
  ARM: versatile: use new init_early for clock tree and sched_clock init
  ARM: integrator: use new init_early for clock tree init
  ...
Tento commit je obsažen v:
Linus Torvalds
2011-03-23 20:37:26 -07:00
rodič 93a72052be 6f82f4db80
revize 2f284c8463
68 změnil soubory, kde provedl 1238 přidání a 3556 odebrání
Stáhněte soubor záplaty Stáhněte rozdílový soubor Rozbalit všechny soubory Sbalit všechny soubory

111
drivers/video/amba-clcd.c
Zobrazit soubor

@@ -120,8 +120,23 @@ static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
static int
clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
u32 caps;
int ret = 0;
if (fb->panel->caps && fb->board->caps)
caps = fb->panel->caps & fb->board->caps;
else {
/* Old way of specifying what can be used */
caps = fb->panel->cntl & CNTL_BGR ?
CLCD_CAP_BGR : CLCD_CAP_RGB;
/* But mask out 444 modes as they weren't supported */
caps &= ~CLCD_CAP_444;
}
/* Only TFT panels can do RGB888/BGR888 */
if (!(fb->panel->cntl & CNTL_LCDTFT))
caps &= ~CLCD_CAP_888;
memset(&var->transp, 0, sizeof(var->transp));
var->red.msb_right = 0;
@@ -133,6 +148,13 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
case 2:
case 4:
case 8:
/* If we can't do 5551, reject */
caps &= CLCD_CAP_5551;
if (!caps) {
ret = -EINVAL;
break;
}
var->red.length = var->bits_per_pixel;
var->red.offset = 0;
var->green.length = var->bits_per_pixel;
@@ -140,23 +162,61 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
var->blue.length = var->bits_per_pixel;
var->blue.offset = 0;
break;
case 16:
var->red.length = 5;
var->blue.length = 5;
/*
* Green length can be 5 or 6 depending whether
* we're operating in RGB555 or RGB565 mode.
*/
if (var->green.length != 5 && var->green.length != 6)
var->green.length = 6;
break;
case 32:
if (fb->panel->cntl & CNTL_LCDTFT) {
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
/* If we can't do 444, 5551 or 565, reject */
if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) {
ret = -EINVAL;
break;
}
/*
* Green length can be 4, 5 or 6 depending whether
* we're operating in 444, 5551 or 565 mode.
*/
if (var->green.length == 4 && caps & CLCD_CAP_444)
caps &= CLCD_CAP_444;
if (var->green.length == 5 && caps & CLCD_CAP_5551)
caps &= CLCD_CAP_5551;
else if (var->green.length == 6 && caps & CLCD_CAP_565)
caps &= CLCD_CAP_565;
else {
/*
* PL110 officially only supports RGB555,
* but may be wired up to allow RGB565.
*/
if (caps & CLCD_CAP_565) {
var->green.length = 6;
caps &= CLCD_CAP_565;
} else if (caps & CLCD_CAP_5551) {
var->green.length = 5;
caps &= CLCD_CAP_5551;
} else {
var->green.length = 4;
caps &= CLCD_CAP_444;
}
}
if (var->green.length >= 5) {
var->red.length = 5;
var->blue.length = 5;
} else {
var->red.length = 4;
var->blue.length = 4;
}
break;
case 32:
/* If we can't do 888, reject */
caps &= CLCD_CAP_888;
if (!caps) {
ret = -EINVAL;
break;
}
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
break;
default:
ret = -EINVAL;
break;
@@ -168,7 +228,20 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
* the bitfield length defined above.
*/
if (ret == 0 && var->bits_per_pixel >= 16) {
if (fb->panel->cntl & CNTL_BGR) {
bool bgr, rgb;
bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0;
rgb = caps & CLCD_CAP_RGB && var->red.offset == 0;
if (!bgr && !rgb)
/*
* The requested format was not possible, try just
* our capabilities. One of BGR or RGB must be
* supported.
*/
bgr = caps & CLCD_CAP_BGR;
if (bgr) {
var->blue.offset = 0;
var->green.offset = var->blue.offset + var->blue.length;
var->red.offset = var->green.offset + var->green.length;
@@ -443,8 +516,8 @@ static int clcdfb_register(struct clcd_fb *fb)
fb_set_var(&fb->fb, &fb->fb.var);
printk(KERN_INFO "CLCD: %s hardware, %s display\n",
fb->board->name, fb->panel->mode.name);
dev_info(&fb->dev->dev, "%s hardware, %s display\n",
fb->board->name, fb->panel->mode.name);
ret = register_framebuffer(&fb->fb);
if (ret == 0)
@@ -486,6 +559,10 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
fb->dev = dev;
fb->board = board;
dev_info(&fb->dev->dev, "PL%03x rev%u at 0x%08llx\n",
amba_part(dev), amba_rev(dev),
(unsigned long long)dev->res.start);
ret = fb->board->setup(fb);
if (ret)
goto free_fb;