ARM: pm: convert samsung platforms to generic suspend/resume support

Tested-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-s3c64xx/sleep.S

@@ -32,25 +32,13 @@
 	 * code after resume.
 	 *
 	 * entry:
-	 *	r0 = pointer to the save block
+	 *	r1 = v:p offset
 	*/
 
 ENTRY(s3c_cpu_save)
 	stmfd	sp!, { r4 - r12, lr }
-
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mrc	p15, 0, r9, c1, c0, 0	@ Control register
-	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-
-	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
-
-	@@ save our state to ram
-	bl	s3c_pm_cb_flushcache
+	ldr	r3, =resume_with_mmu
+	bl	cpu_suspend
 
 	@@ call final suspend code
 	ldr	r0, =pm_cpu_sleep
@@ -61,18 +49,6 @@ ENTRY(s3c_cpu_save)
 resume_with_mmu:
 	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
 
-	.data
-
-	/* the next bit is code, but it requires easy access to the
-	 * s3c_sleep_save_phys data before the MMU is switched on, so
-	 * we store the code that needs this variable in the .data where
-	 * the value can be written to (the .text segment is RO).
-	*/
-
-	.global	s3c_sleep_save_phys
-s3c_sleep_save_phys:
-	.word	0
-
 	/* Sleep magic, the word before the resume entry point so that the
 	 * bootloader can check for a resumeable image. */
 
@@ -110,35 +86,4 @@ ENTRY(s3c_cpu_resume)
 	orr	r0, r0, #1 << 15			@ GPN15
 	str	r0, [ r3, #S3C64XX_GPNDAT ]
 #endif
-
-	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
-	 * are thoroughly cleaned just in case the bootloader didn't do it
-	 * for us. */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
-	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
-
-	ldr	r0, s3c_sleep_save_phys
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-
-	mov	r0, #0			@ restore copro access controls
-	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-	mcr 	p15, 0, r0, c7, c5, 4
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
-	nop
-	mov	pc, r2				/* jump back */
-
-	.end
+	b	cpu_resume