Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - HYP mode stub supports kexec/kdump on 32-bit
   - improved PMU support
   - virtual interrupt controller performance improvements
   - support for userspace virtual interrupt controller (slower, but
     necessary for KVM on the weird Broadcom SoCs used by the Raspberry
     Pi 3)

  MIPS:
   - basic support for hardware virtualization (ImgTec P5600/P6600/I6400
     and Cavium Octeon III)

  PPC:
   - in-kernel acceleration for VFIO

  s390:
   - support for guests without storage keys
   - adapter interruption suppression

  x86:
   - usual range of nVMX improvements, notably nested EPT support for
     accessed and dirty bits
   - emulation of CPL3 CPUID faulting

  generic:
   - first part of VCPU thread request API
   - kvm_stat improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
  kvm: nVMX: Don't validate disabled secondary controls
  KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick
  Revert "KVM: Support vCPU-based gfn->hva cache"
  tools/kvm: fix top level makefile
  KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING
  KVM: Documentation: remove VM mmap documentation
  kvm: nVMX: Remove superfluous VMX instruction fault checks
  KVM: x86: fix emulation of RSM and IRET instructions
  KVM: mark requests that need synchronization
  KVM: return if kvm_vcpu_wake_up() did wake up the VCPU
  KVM: add explicit barrier to kvm_vcpu_kick
  KVM: perform a wake_up in kvm_make_all_cpus_request
  KVM: mark requests that do not need a wakeup
  KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up
  KVM: x86: always use kvm_make_request instead of set_bit
  KVM: add kvm_{test,clear}_request to replace {test,clear}_bit
  s390: kvm: Cpu model support for msa6, msa7 and msa8
  KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK
  kvm: better MWAIT emulation for guests
  KVM: x86: virtualize cpuid faulting
  ...

Documentation/virtual/kvm/devices/s390_flic.txt

@@ -14,6 +14,8 @@ FLIC provides support to
 - purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ)
 - enable/disable for the guest transparent async page faults
 - register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*)
+- modify AIS (adapter-interruption-suppression) mode state (KVM_DEV_FLIC_AISM)
+- inject adapter interrupts on a specified adapter (KVM_DEV_FLIC_AIRQ_INJECT)
 
 Groups:
   KVM_DEV_FLIC_ENQUEUE
@@ -64,12 +66,18 @@ struct kvm_s390_io_adapter {
 	__u8 isc;
 	__u8 maskable;
 	__u8 swap;
-	__u8 pad;
+	__u8 flags;
 };
 
    id contains the unique id for the adapter, isc the I/O interruption subclass
-   to use, maskable whether this adapter may be masked (interrupts turned off)
-   and swap whether the indicators need to be byte swapped.
+   to use, maskable whether this adapter may be masked (interrupts turned off),
+   swap whether the indicators need to be byte swapped, and flags contains
+   further characteristics of the adapter.
+   Currently defined values for 'flags' are:
+   - KVM_S390_ADAPTER_SUPPRESSIBLE: adapter is subject to AIS
+     (adapter-interrupt-suppression) facility. This flag only has an effect if
+     the AIS capability is enabled.
+   Unknown flag values are ignored.
 
 
   KVM_DEV_FLIC_ADAPTER_MODIFY
@@ -101,6 +109,33 @@ struct kvm_s390_io_adapter_req {
       release a userspace page for the translated address specified in addr
       from the list of mappings
 
+  KVM_DEV_FLIC_AISM
+    modify the adapter-interruption-suppression mode for a given isc if the
+    AIS capability is enabled. Takes a kvm_s390_ais_req describing:
+
+struct kvm_s390_ais_req {
+	__u8 isc;
+	__u16 mode;
+};
+
+    isc contains the target I/O interruption subclass, mode the target
+    adapter-interruption-suppression mode. The following modes are
+    currently supported:
+    - KVM_S390_AIS_MODE_ALL: ALL-Interruptions Mode, i.e. airq injection
+      is always allowed;
+    - KVM_S390_AIS_MODE_SINGLE: SINGLE-Interruption Mode, i.e. airq
+      injection is only allowed once and the following adapter interrupts
+      will be suppressed until the mode is set again to ALL-Interruptions
+      or SINGLE-Interruption mode.
+
+  KVM_DEV_FLIC_AIRQ_INJECT
+    Inject adapter interrupts on a specified adapter.
+    attr->attr contains the unique id for the adapter, which allows for
+    adapter-specific checks and actions.
+    For adapters subject to AIS, handle the airq injection suppression for
+    an isc according to the adapter-interruption-suppression mode on condition
+    that the AIS capability is enabled.
+
 Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on
 FLIC with an unknown group or attribute gives the error code EINVAL (instead of
 ENXIO, as specified in the API documentation). It is not possible to conclude

Documentation/virtual/kvm/devices/vfio.txt

@@ -16,7 +16,21 @@ Groups:
 
 KVM_DEV_VFIO_GROUP attributes:
   KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking
+	kvm_device_attr.addr points to an int32_t file descriptor
+	for the VFIO group.
   KVM_DEV_VFIO_GROUP_DEL: Remove a VFIO group from VFIO-KVM device tracking
+	kvm_device_attr.addr points to an int32_t file descriptor
+	for the VFIO group.
+  KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE: attaches a guest visible TCE table
+	allocated by sPAPR KVM.
+	kvm_device_attr.addr points to a struct:
 
-For each, kvm_device_attr.addr points to an int32_t file descriptor
-for the VFIO group.
+	struct kvm_vfio_spapr_tce {
+		__s32	groupfd;
+		__s32	tablefd;
+	};
+
+	where
+	@groupfd is a file descriptor for a VFIO group;
+	@tablefd is a file descriptor for a TCE table allocated via
+		KVM_CREATE_SPAPR_TCE.

Documentation/virtual/kvm/devices/vm.txt

@@ -140,7 +140,8 @@ struct kvm_s390_vm_cpu_subfunc {
        u8 kmo[16];           # valid with Message-Security-Assist-Extension 4
        u8 pcc[16];           # valid with Message-Security-Assist-Extension 4
        u8 ppno[16];          # valid with Message-Security-Assist-Extension 5
-       u8 reserved[1824];    # reserved for future instructions
+       u8 kma[16];           # valid with Message-Security-Assist-Extension 8
+       u8 reserved[1808];    # reserved for future instructions
 };
 
 Parameters: address of a buffer to load the subfunction blocks from.