xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'topic/quirk-cleanup' into topic/hda

Browse Source
This commit is contained in:
Takashi Iwai
2009-02-09 17:19:21 +01:00
parent 23c7b521c2 8bd4bb7a35
commit 2a074f4a54
1578 changed files with 29492 additions and 13067 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
CREDITS
View File

@@ -3786,14 +3786,11 @@ S: The Netherlands
N: David Woodhouse N: David Woodhouse
E: dwmw2@infradead.org E: dwmw2@infradead.org
D: ARCnet stuff, Applicom board driver, SO_BINDTODEVICE, D: JFFS2 file system, Memory Technology Device subsystem,
D: some Alpha platform porting from 2.0, Memory Technology Devices,
D: Acquire watchdog timer, PC speaker driver maintenance,
D: various other stuff that annoyed me by not working. D: various other stuff that annoyed me by not working.
S: c/o Red Hat Engineering S: c/o Intel Corporation
S: Rustat House S: Pipers Way
S: 60 Clifton Road S: Swindon. SN3 1RJ
S: Cambridge. CB1 7EG
S: England S: England
N: Chris Wright N: Chris Wright

9
Documentation/DMA-API.txt
View File

@@ -170,16 +170,15 @@ Returns: 0 if successful and a negative error if not.
u64 u64
dma_get_required_mask(struct device *dev) dma_get_required_mask(struct device *dev)
After setting the mask with dma_set_mask(), this API returns the This API returns the mask that the platform requires to
actual mask (within that already set) that the platform actually operate efficiently. Usually this means the returned mask
requires to operate efficiently. Usually this means the returned mask
is the minimum required to cover all of memory. Examining the is the minimum required to cover all of memory. Examining the
required mask gives drivers with variable descriptor sizes the required mask gives drivers with variable descriptor sizes the
opportunity to use smaller descriptors as necessary. opportunity to use smaller descriptors as necessary.
Requesting the required mask does not alter the current mask. If you Requesting the required mask does not alter the current mask. If you
wish to take advantage of it, you should issue another dma_set_mask() wish to take advantage of it, you should issue a dma_set_mask()
call to lower the mask again. call to set the mask to the value returned.
Part Id - Streaming DMA mappings Part Id - Streaming DMA mappings

4
Documentation/accounting/getdelays.c
View File

@@ -392,6 +392,10 @@ int main(int argc, char *argv[])
goto err; goto err;
} }
} }
if (!maskset && !tid && !containerset) {
usage();
goto err;
}
do { do {
int i; int i;

5
Documentation/cgroups/cgroups.txt
View File

@@ -1,7 +1,8 @@
CGROUPS CGROUPS
------- -------
Written by Paul Menage <menage@google.com> based on Documentation/cpusets.txt Written by Paul Menage <menage@google.com> based on
Documentation/cgroups/cpusets.txt
Original copyright statements from cpusets.txt: Original copyright statements from cpusets.txt:
Portions Copyright (C) 2004 BULL SA. Portions Copyright (C) 2004 BULL SA.
@@ -68,7 +69,7 @@ On their own, the only use for cgroups is for simple job
tracking. The intention is that other subsystems hook into the generic tracking. The intention is that other subsystems hook into the generic
cgroup support to provide new attributes for cgroups, such as cgroup support to provide new attributes for cgroups, such as
accounting/limiting the resources which processes in a cgroup can accounting/limiting the resources which processes in a cgroup can
access. For example, cpusets (see Documentation/cpusets.txt) allows access. For example, cpusets (see Documentation/cgroups/cpusets.txt) allows
you to associate a set of CPUs and a set of memory nodes with the you to associate a set of CPUs and a set of memory nodes with the
tasks in each cgroup. tasks in each cgroup.

0
Documentation/controllers/cpuacct.txt → Documentation/cgroups/cpuacct.txt
View File

0
Documentation/cpusets.txt → Documentation/cgroups/cpusets.txt
View File

0
Documentation/controllers/devices.txt → Documentation/cgroups/devices.txt
View File

2
Documentation/controllers/memcg_test.txt → Documentation/cgroups/memcg_test.txt
View File

@@ -6,7 +6,7 @@ Because VM is getting complex (one of reasons is memcg...), memcg's behavior
is complex. This is a document for memcg's internal behavior. is complex. This is a document for memcg's internal behavior.
Please note that implementation details can be changed. Please note that implementation details can be changed.
(*) Topics on API should be in Documentation/controllers/memory.txt) (*) Topics on API should be in Documentation/cgroups/memory.txt)
0. How to record usage ? 0. How to record usage ?
2 objects are used. 2 objects are used.

0
Documentation/controllers/memory.txt → Documentation/cgroups/memory.txt
View File

0
Documentation/controllers/resource_counter.txt → Documentation/cgroups/resource_counter.txt
View File

4
Documentation/filesystems/nfs-rdma.txt
View File

@@ -251,7 +251,7 @@ NFS/RDMA Setup
Instruct the server to listen on the RDMA transport: Instruct the server to listen on the RDMA transport:
$ echo rdma 2050 > /proc/fs/nfsd/portlist $ echo rdma 20049 > /proc/fs/nfsd/portlist
- On the client system - On the client system
@@ -263,7 +263,7 @@ NFS/RDMA Setup
Regardless of how the client was built (module or built-in), use this Regardless of how the client was built (module or built-in), use this
command to mount the NFS/RDMA server: command to mount the NFS/RDMA server:
$ mount -o rdma,port=2050 <IPoIB-server-name-or-address>:/<export> /mnt $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt
To verify that the mount is using RDMA, run "cat /proc/mounts" and check To verify that the mount is using RDMA, run "cat /proc/mounts" and check
the "proto" field for the given mount. the "proto" field for the given mount.

288
Documentation/filesystems/proc.txt
View File

@@ -1371,292 +1371,8 @@ auto_msgmni default value is 1.
2.4 /proc/sys/vm - The virtual memory subsystem 2.4 /proc/sys/vm - The virtual memory subsystem
----------------------------------------------- -----------------------------------------------
The files in this directory can be used to tune the operation of the virtual Please see: Documentation/sysctls/vm.txt for a description of these
memory (VM) subsystem of the Linux kernel. entries.
vfs_cache_pressure
------------------
Controls the tendency of the kernel to reclaim the memory which is used for
caching of directory and inode objects.
At the default value of vfs_cache_pressure=100 the kernel will attempt to
reclaim dentries and inodes at a "fair" rate with respect to pagecache and
swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer
to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100
causes the kernel to prefer to reclaim dentries and inodes.
dirty_background_bytes
----------------------
Contains the amount of dirty memory at which the pdflush background writeback
daemon will start writeback.
If dirty_background_bytes is written, dirty_background_ratio becomes a function
of its value (dirty_background_bytes / the amount of dirtyable system memory).
dirty_background_ratio
----------------------
Contains, as a percentage of the dirtyable system memory (free pages + mapped
pages + file cache, not including locked pages and HugePages), the number of
pages at which the pdflush background writeback daemon will start writing out
dirty data.
If dirty_background_ratio is written, dirty_background_bytes becomes a function
of its value (dirty_background_ratio * the amount of dirtyable system memory).
dirty_bytes
-----------
Contains the amount of dirty memory at which a process generating disk writes
will itself start writeback.
If dirty_bytes is written, dirty_ratio becomes a function of its value
(dirty_bytes / the amount of dirtyable system memory).
dirty_ratio
-----------
Contains, as a percentage of the dirtyable system memory (free pages + mapped
pages + file cache, not including locked pages and HugePages), the number of
pages at which a process which is generating disk writes will itself start
writing out dirty data.
If dirty_ratio is written, dirty_bytes becomes a function of its value
(dirty_ratio * the amount of dirtyable system memory).
dirty_writeback_centisecs
-------------------------
The pdflush writeback daemons will periodically wake up and write `old' data
out to disk. This tunable expresses the interval between those wakeups, in
100'ths of a second.
Setting this to zero disables periodic writeback altogether.
dirty_expire_centisecs
----------------------
This tunable is used to define when dirty data is old enough to be eligible
for writeout by the pdflush daemons. It is expressed in 100'ths of a second.
Data which has been dirty in-memory for longer than this interval will be
written out next time a pdflush daemon wakes up.
highmem_is_dirtyable
--------------------
Only present if CONFIG_HIGHMEM is set.
This defaults to 0 (false), meaning that the ratios set above are calculated
as a percentage of lowmem only. This protects against excessive scanning
in page reclaim, swapping and general VM distress.
Setting this to 1 can be useful on 32 bit machines where you want to make
random changes within an MMAPed file that is larger than your available
lowmem without causing large quantities of random IO. Is is safe if the
behavior of all programs running on the machine is known and memory will
not be otherwise stressed.
legacy_va_layout
----------------
If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
will use the legacy (2.4) layout for all processes.
lowmem_reserve_ratio
---------------------
For some specialised workloads on highmem machines it is dangerous for
the kernel to allow process memory to be allocated from the "lowmem"
zone. This is because that memory could then be pinned via the mlock()
system call, or by unavailability of swapspace.
And on large highmem machines this lack of reclaimable lowmem memory
can be fatal.
So the Linux page allocator has a mechanism which prevents allocations
which _could_ use highmem from using too much lowmem. This means that
a certain amount of lowmem is defended from the possibility of being
captured into pinned user memory.
(The same argument applies to the old 16 megabyte ISA DMA region. This
mechanism will also defend that region from allocations which could use
highmem or lowmem).
The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
in defending these lower zones.
If you have a machine which uses highmem or ISA DMA and your
applications are using mlock(), or if you are running with no swap then
you probably should change the lowmem_reserve_ratio setting.
The lowmem_reserve_ratio is an array. You can see them by reading this file.
-
% cat /proc/sys/vm/lowmem_reserve_ratio
256 256 32
-
Note: # of this elements is one fewer than number of zones. Because the highest
zone's value is not necessary for following calculation.
But, these values are not used directly. The kernel calculates # of protection
pages for each zones from them. These are shown as array of protection pages
in /proc/zoneinfo like followings. (This is an example of x86-64 box).
Each zone has an array of protection pages like this.
-
Node 0, zone DMA
pages free 1355
min 3
low 3
high 4
:
:
numa_other 0
protection: (0, 2004, 2004, 2004)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
pagesets
cpu: 0 pcp: 0
:
-
These protections are added to score to judge whether this zone should be used
for page allocation or should be reclaimed.
In this example, if normal pages (index=2) are required to this DMA zone and
pages_high is used for watermark, the kernel judges this zone should not be
used because pages_free(1355) is smaller than watermark + protection[2]
(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
normal page requirement. If requirement is DMA zone(index=0), protection[0]
(=0) is used.
zone[i]'s protection[j] is calculated by following expression.
(i < j):
zone[i]->protection[j]
= (total sums of present_pages from zone[i+1] to zone[j] on the node)
/ lowmem_reserve_ratio[i];
(i = j):
(should not be protected. = 0;
(i > j):
(not necessary, but looks 0)
The default values of lowmem_reserve_ratio[i] are
256 (if zone[i] means DMA or DMA32 zone)
32 (others).
As above expression, they are reciprocal number of ratio.
256 means 1/256. # of protection pages becomes about "0.39%" of total present
pages of higher zones on the node.
If you would like to protect more pages, smaller values are effective.
The minimum value is 1 (1/1 -> 100%).
page-cluster
------------
page-cluster controls the number of pages which are written to swap in
a single attempt. The swap I/O size.
It is a logarithmic value - setting it to zero means "1 page", setting
it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
The default value is three (eight pages at a time). There may be some
small benefits in tuning this to a different value if your workload is
swap-intensive.
overcommit_memory
-----------------
Controls overcommit of system memory, possibly allowing processes
to allocate (but not use) more memory than is actually available.
0 - Heuristic overcommit handling. Obvious overcommits of
address space are refused. Used for a typical system. It
ensures a seriously wild allocation fails while allowing
overcommit to reduce swap usage. root is allowed to
allocate slightly more memory in this mode. This is the
default.
1 - Always overcommit. Appropriate for some scientific
applications.
2 - Don't overcommit. The total address space commit
for the system is not permitted to exceed swap plus a
configurable percentage (default is 50) of physical RAM.
Depending on the percentage you use, in most situations
this means a process will not be killed while attempting
to use already-allocated memory but will receive errors
on memory allocation as appropriate.
overcommit_ratio
----------------
Percentage of physical memory size to include in overcommit calculations
(see above.)
Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100)
swapspace = total size of all swap areas
physmem = size of physical memory in system
nr_hugepages and hugetlb_shm_group
----------------------------------
nr_hugepages configures number of hugetlb page reserved for the system.
hugetlb_shm_group contains group id that is allowed to create SysV shared
memory segment using hugetlb page.
hugepages_treat_as_movable
--------------------------
This parameter is only useful when kernelcore= is specified at boot time to
create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
value written to hugepages_treat_as_movable allows huge pages to be allocated
from ZONE_MOVABLE.
Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
pages pool can easily grow or shrink within. Assuming that applications are
not running that mlock() a lot of memory, it is likely the huge pages pool
can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
into nr_hugepages and triggering page reclaim.
laptop_mode
-----------
laptop_mode is a knob that controls "laptop mode". All the things that are
controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
block_dump
----------
block_dump enables block I/O debugging when set to a nonzero value. More
information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
swap_token_timeout
------------------
This file contains valid hold time of swap out protection token. The Linux
VM has token based thrashing control mechanism and uses the token to prevent
unnecessary page faults in thrashing situation. The unit of the value is
second. The value would be useful to tune thrashing behavior.
drop_caches
-----------
Writing to this will cause the kernel to drop clean caches, dentries and
inodes from memory, causing that memory to become free.
To free pagecache:
echo 1 > /proc/sys/vm/drop_caches
To free dentries and inodes:
echo 2 > /proc/sys/vm/drop_caches
To free pagecache, dentries and inodes:
echo 3 > /proc/sys/vm/drop_caches
As this is a non-destructive operation and dirty objects are not freeable, the
user should run `sync' first.
2.5 /proc/sys/dev - Device specific parameters 2.5 /proc/sys/dev - Device specific parameters

87
Documentation/hwmon/adt7475 Normal file
View File

@@ -0,0 +1,87 @@
This describes the interface for the ADT7475 driver:
(there are 4 fans, numbered fan1 to fan4):
fanX_input Read the current speed of the fan (in RPMs)
fanX_min Read/write the minimum speed of the fan. Dropping
below this sets an alarm.
(there are three PWMs, numbered pwm1 to pwm3):
pwmX Read/write the current duty cycle of the PWM. Writes
only have effect when auto mode is turned off (see
below). Range is 0 - 255.
pwmX_enable Fan speed control method:
0 - No control (fan at full speed)
1 - Manual fan speed control (using pwm[1-*])
2 - Automatic fan speed control
pwmX_auto_channels_temp Select which channels affect this PWM
1 - TEMP1 controls PWM
2 - TEMP2 controls PWM
4 - TEMP3 controls PWM
6 - TEMP2 and TEMP3 control PWM
7 - All three inputs control PWM
pwmX_freq Read/write the PWM frequency in Hz. The number
should be one of the following:
11 Hz
14 Hz
22 Hz
29 Hz
35 Hz
44 Hz
58 Hz
88 Hz
pwmX_auto_point1_pwm Read/write the minimum PWM duty cycle in automatic mode
pwmX_auto_point2_pwm Read/write the maximum PWM duty cycle in automatic mode
(there are three temperature settings numbered temp1 to temp3):
tempX_input Read the current temperature. The value is in milli
degrees of Celsius.
tempX_max Read/write the upper temperature limit - exceeding this
will cause an alarm.
tempX_min Read/write the lower temperature limit - exceeding this
will cause an alarm.
tempX_offset Read/write the temperature adjustment offset
tempX_crit Read/write the THERM limit for remote1.
tempX_crit_hyst Set the temperature value below crit where the
fans will stay on - this helps drive the temperature
low enough so it doesn't stay near the edge and
cause THERM to keep tripping.
tempX_auto_point1_temp Read/write the minimum temperature where the fans will
turn on in automatic mode.
tempX_auto_point2_temp Read/write the maximum temperature over which the fans
will run in automatic mode. tempX_auto_point1_temp
and tempX_auto_point2_temp together define the
range of automatic control.
tempX_alarm Read a 1 if the max/min alarm is set
tempX_fault Read a 1 if either temp1 or temp3 diode has a fault
(There are two voltage settings, in1 and in2):
inX_input Read the current voltage on VCC. Value is in
millivolts.
inX_min read/write the minimum voltage limit.
Dropping below this causes an alarm.
inX_max read/write the maximum voltage limit.
Exceeding this causes an alarm.
inX_alarm Read a 1 if the max/min alarm is set.

30
Documentation/hwmon/lis3lv02d
View File

@@ -13,18 +13,21 @@ Author:
Description Description
----------- -----------
This driver provides support for the accelerometer found in various HP laptops This driver provides support for the accelerometer found in various HP
sporting the feature officially called "HP Mobile Data Protection System 3D" or laptops sporting the feature officially called "HP Mobile Data
"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models Protection System 3D" or "HP 3D DriveGuard". It detect automatically
(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will laptops with this sensor. Known models (for now the HP 2133, nc6420,
have their axis automatically oriented on standard way (eg: you can directly nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
play neverball). The accelerometer data is readable via automatically oriented on standard way (eg: you can directly play
neverball). The accelerometer data is readable via
/sys/devices/platform/lis3lv02d. /sys/devices/platform/lis3lv02d.
Sysfs attributes under /sys/devices/platform/lis3lv02d/: Sysfs attributes under /sys/devices/platform/lis3lv02d/:
position - 3D position that the accelerometer reports. Format: "(x,y,z)" position - 3D position that the accelerometer reports. Format: "(x,y,z)"
calibrate - read: values (x, y, z) that are used as the base for input class device operation. calibrate - read: values (x, y, z) that are used as the base for input
write: forces the base to be recalibrated with the current position. class device operation.
write: forces the base to be recalibrated with the current
position.
rate - reports the sampling rate of the accelerometer device in HZ rate - reports the sampling rate of the accelerometer device in HZ
This driver also provides an absolute input class device, allowing This driver also provides an absolute input class device, allowing
@@ -39,11 +42,12 @@ the accelerometer are converted into a "standard" organisation of the axes
* When the laptop is horizontal the position reported is about 0 for X and Y * When the laptop is horizontal the position reported is about 0 for X and Y
and a positive value for Z and a positive value for Z
* If the left side is elevated, X increases (becomes positive) * If the left side is elevated, X increases (becomes positive)
* If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) * If the front side (where the touchpad is) is elevated, Y decreases
(becomes negative)
* If the laptop is put upside-down, Z becomes negative * If the laptop is put upside-down, Z becomes negative
If your laptop model is not recognized (cf "dmesg"), you can send an email to the If your laptop model is not recognized (cf "dmesg"), you can send an
authors to add it to the database. When reporting a new laptop, please include email to the authors to add it to the database. When reporting a new
the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position laptop, please include the output of "dmidecode" plus the value of
in these four cases. /sys/devices/platform/lis3lv02d/position in these four cases.

29
Documentation/kbuild/kbuild.txt
View File

@@ -3,7 +3,7 @@ Environment variables
KCPPFLAGS KCPPFLAGS
-------------------------------------------------- --------------------------------------------------
Additional options to pass when preprocessing. The preprocessing options Additional options to pass when preprocessing. The preprocessing options
will be used in all cases where kbuild do preprocessing including will be used in all cases where kbuild does preprocessing including
building C files and assembler files. building C files and assembler files.
KAFLAGS KAFLAGS
@@ -16,7 +16,7 @@ Additional options to the C compiler.
KBUILD_VERBOSE KBUILD_VERBOSE
-------------------------------------------------- --------------------------------------------------
Set the kbuild verbosity. Can be assinged same values as "V=...". Set the kbuild verbosity. Can be assigned same values as "V=...".
See make help for the full list. See make help for the full list.
Setting "V=..." takes precedence over KBUILD_VERBOSE. Setting "V=..." takes precedence over KBUILD_VERBOSE.
@@ -35,14 +35,14 @@ KBUILD_OUTPUT
-------------------------------------------------- --------------------------------------------------
Specify the output directory when building the kernel. Specify the output directory when building the kernel.
The output directory can also be specificed using "O=...". The output directory can also be specificed using "O=...".
Setting "O=..." takes precedence over KBUILD_OUTPUT Setting "O=..." takes precedence over KBUILD_OUTPUT.
ARCH ARCH
-------------------------------------------------- --------------------------------------------------
Set ARCH to the architecture to be built. Set ARCH to the architecture to be built.
In most cases the name of the architecture is the same as the In most cases the name of the architecture is the same as the
directory name found in the arch/ directory. directory name found in the arch/ directory.
But some architectures suach as x86 and sparc has aliases. But some architectures such as x86 and sparc have aliases.
x86: i386 for 32 bit, x86_64 for 64 bit x86: i386 for 32 bit, x86_64 for 64 bit
sparc: sparc for 32 bit, sparc64 for 64 bit sparc: sparc for 32 bit, sparc64 for 64 bit
@@ -63,7 +63,7 @@ CF is often used on the command-line like this:
INSTALL_PATH INSTALL_PATH
-------------------------------------------------- --------------------------------------------------
INSTALL_PATH specifies where to place the updated kernel and system map INSTALL_PATH specifies where to place the updated kernel and system map
images. Default is /boot, but you can set it to other values images. Default is /boot, but you can set it to other values.
MODLIB MODLIB
@@ -90,7 +90,7 @@ INSTALL_MOD_STRIP will used as the options to the strip command.
INSTALL_FW_PATH INSTALL_FW_PATH
-------------------------------------------------- --------------------------------------------------
INSTALL_FW_PATH specify where to install the firmware blobs. INSTALL_FW_PATH specifies where to install the firmware blobs.
The default value is: The default value is:
$(INSTALL_MOD_PATH)/lib/firmware $(INSTALL_MOD_PATH)/lib/firmware
@@ -99,7 +99,7 @@ The value can be overridden in which case the default value is ignored.
INSTALL_HDR_PATH INSTALL_HDR_PATH
-------------------------------------------------- --------------------------------------------------
INSTALL_HDR_PATH specify where to install user space headers when INSTALL_HDR_PATH specifies where to install user space headers when
executing "make headers_*". executing "make headers_*".
The default value is: The default value is:
@@ -112,22 +112,23 @@ The value can be overridden in which case the default value is ignored.
KBUILD_MODPOST_WARN KBUILD_MODPOST_WARN
-------------------------------------------------- --------------------------------------------------
KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined
symbols in the final module linking stage. symbols in the final module linking stage. It changes such errors
into warnings.
KBUILD_MODPOST_FINAL KBUILD_MODPOST_NOFINAL
-------------------------------------------------- --------------------------------------------------
KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
This is solely usefull to speed up test compiles. This is solely useful to speed up test compiles.
KBUILD_EXTRA_SYMBOLS KBUILD_EXTRA_SYMBOLS
-------------------------------------------------- --------------------------------------------------
For modules use symbols from another modules. For modules that use symbols from other modules.
See more details in modules.txt. See more details in modules.txt.
ALLSOURCE_ARCHS ALLSOURCE_ARCHS
-------------------------------------------------- --------------------------------------------------
For tags/TAGS/cscope targets, you can specify more than one archs For tags/TAGS/cscope targets, you can specify more than one arch
to be included in the databases, separated by blankspace. e.g. to be included in the databases, separated by blank space. E.g.:
$ make ALLSOURCE_ARCHS="x86 mips arm" tags $ make ALLSOURCE_ARCHS="x86 mips arm" tags

7
Documentation/kernel-parameters.txt
View File

@@ -577,9 +577,6 @@ and is between 256 and 4096 characters. It is defined in the file
a memory unit (amount[KMG]). See also a memory unit (amount[KMG]). See also
Documentation/kdump/kdump.txt for a example. Documentation/kdump/kdump.txt for a example.
cs4232= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
cs89x0_dma= [HW,NET] cs89x0_dma= [HW,NET]
Format: <dma> Format: <dma>
@@ -732,10 +729,6 @@ and is between 256 and 4096 characters. It is defined in the file
Default value is 0. Default value is 0.
Value can be changed at runtime via /selinux/enforce. Value can be changed at runtime via /selinux/enforce.
es1371= [HW,OSS]
Format: <spdif>,[<nomix>,[<amplifier>]]
See also header of sound/oss/es1371.c.
ether= [HW,NET] Ethernet cards parameters ether= [HW,NET] Ethernet cards parameters
This option is obsoleted by the "netdev=" option, which This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details. has equivalent usage. See its documentation for details.

25
Documentation/laptops/thinkpad-acpi.txt
View File

@@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver ThinkPad ACPI Extras Driver
Version 0.21 Version 0.22
May 29th, 2008 November 23rd, 2008
Borislav Deianov <borislav@users.sf.net> Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -16,7 +16,8 @@ supported by the generic Linux ACPI drivers.
This driver used to be named ibm-acpi until kernel 2.6.21 and release This driver used to be named ibm-acpi until kernel 2.6.21 and release
0.13-20070314. It used to be in the drivers/acpi tree, but it was 0.13-20070314. It used to be in the drivers/acpi tree, but it was
moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
2.6.22, and release 0.14. 2.6.22, and release 0.14. It was moved to drivers/platform/x86 for
kernel 2.6.29 and release 0.22.
The driver is named "thinkpad-acpi". In some places, like module The driver is named "thinkpad-acpi". In some places, like module
names, "thinkpad_acpi" is used because of userspace issues. names, "thinkpad_acpi" is used because of userspace issues.
@@ -1412,6 +1413,24 @@ Sysfs notes:
rfkill controller switch "tpacpi_wwan_sw": refer to rfkill controller switch "tpacpi_wwan_sw": refer to
Documentation/rfkill.txt for details. Documentation/rfkill.txt for details.
EXPERIMENTAL: UWB
-----------------
This feature is marked EXPERIMENTAL because it has not been extensively
tested and validated in various ThinkPad models yet. The feature may not
work as expected. USE WITH CAUTION! To use this feature, you need to supply
the experimental=1 parameter when loading the module.
sysfs rfkill class: switch "tpacpi_uwb_sw"
This feature exports an rfkill controller for the UWB device, if one is
present and enabled in the BIOS.
Sysfs notes:
rfkill controller switch "tpacpi_uwb_sw": refer to
Documentation/rfkill.txt for details.
Multiple Commands, Module Parameters Multiple Commands, Module Parameters
------------------------------------ ------------------------------------

6
Documentation/mips/AU1xxx_IDE.README
View File

@@ -52,14 +52,12 @@ Two files are introduced:
b) 'drivers/ide/mips/au1xxx-ide.c' b) 'drivers/ide/mips/au1xxx-ide.c'
contains the functionality of the AU1XXX IDE driver contains the functionality of the AU1XXX IDE driver
Four configs variables are introduced: Following extra configs variables are introduced:
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode
CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
controller controller
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
per descriptor
SUPPORTED IDE MODES SUPPORTED IDE MODES
@@ -87,7 +85,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y CONFIG_IDEDMA_AUTO=y
@@ -105,7 +102,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y CONFIG_IDEDMA_AUTO=y

3
Documentation/networking/netconsole.txt
View File

@@ -51,7 +51,8 @@ Built-in netconsole starts immediately after the TCP stack is
initialized and attempts to bring up the supplied dev at the supplied initialized and attempts to bring up the supplied dev at the supplied
address. address.
The remote host can run either 'netcat -u -l -p <port>' or syslogd. The remote host can run either 'netcat -u -l -p <port>',
'nc -l -u <port>' or syslogd.
Dynamic reconfiguration: Dynamic reconfiguration:
======================== ========================

2
Documentation/scheduler/sched-design-CFS.txt
View File

@@ -231,7 +231,7 @@ CPU bandwidth control purposes:
This options needs CONFIG_CGROUPS to be defined, and lets the administrator This options needs CONFIG_CGROUPS to be defined, and lets the administrator
create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See
Documentation/cgroups.txt for more information about this filesystem. Documentation/cgroups/cgroups.txt for more information about this filesystem.
Only one of these options to group tasks can be chosen and not both. Only one of these options to group tasks can be chosen and not both.

647
Documentation/sysctl/vm.txt
View File

@@ -1,12 +1,13 @@
Documentation for /proc/sys/vm/* kernel version 2.2.10 Documentation for /proc/sys/vm/* kernel version 2.6.29
(c) 1998, 1999, Rik van Riel <riel@nl.linux.org> (c) 1998, 1999, Rik van Riel <riel@nl.linux.org>
(c) 2008 Peter W. Morreale <pmorreale@novell.com>
For general info and legal blurb, please look in README. For general info and legal blurb, please look in README.
============================================================== ==============================================================
This file contains the documentation for the sysctl files in This file contains the documentation for the sysctl files in
/proc/sys/vm and is valid for Linux kernel version 2.2. /proc/sys/vm and is valid for Linux kernel version 2.6.29.
The files in this directory can be used to tune the operation The files in this directory can be used to tune the operation
of the virtual memory (VM) subsystem of the Linux kernel and of the virtual memory (VM) subsystem of the Linux kernel and
@@ -16,83 +17,244 @@ Default values and initialization routines for most of these
files can be found in mm/swap.c. files can be found in mm/swap.c.
Currently, these files are in /proc/sys/vm: Currently, these files are in /proc/sys/vm:
- overcommit_memory
- page-cluster - block_dump
- dirty_ratio - dirty_background_bytes
- dirty_background_ratio - dirty_background_ratio
- dirty_bytes
- dirty_expire_centisecs - dirty_expire_centisecs
- dirty_ratio
- dirty_writeback_centisecs - dirty_writeback_centisecs
- highmem_is_dirtyable (only if CONFIG_HIGHMEM set) - drop_caches
- hugepages_treat_as_movable
- hugetlb_shm_group
- laptop_mode
- legacy_va_layout
- lowmem_reserve_ratio
- max_map_count - max_map_count
- min_free_kbytes - min_free_kbytes
- laptop_mode
- block_dump
- drop-caches
- zone_reclaim_mode
- min_unmapped_ratio
- min_slab_ratio - min_slab_ratio
- panic_on_oom - min_unmapped_ratio
- oom_dump_tasks - mmap_min_addr
- oom_kill_allocating_task
- mmap_min_address
- numa_zonelist_order
- nr_hugepages - nr_hugepages
- nr_overcommit_hugepages - nr_overcommit_hugepages
- nr_trim_pages (only if CONFIG_MMU=n) - nr_pdflush_threads
- nr_trim_pages (only if CONFIG_MMU=n)
- numa_zonelist_order
- oom_dump_tasks
- oom_kill_allocating_task
- overcommit_memory
- overcommit_ratio
- page-cluster
- panic_on_oom
- percpu_pagelist_fraction
- stat_interval
- swappiness
- vfs_cache_pressure
- zone_reclaim_mode
============================================================== ==============================================================
dirty_bytes, dirty_ratio, dirty_background_bytes, block_dump
dirty_background_ratio, dirty_expire_centisecs,
dirty_writeback_centisecs, highmem_is_dirtyable,
vfs_cache_pressure, laptop_mode, block_dump, swap_token_timeout,
drop-caches, hugepages_treat_as_movable:
See Documentation/filesystems/proc.txt block_dump enables block I/O debugging when set to a nonzero value. More
information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
============================================================== ==============================================================
overcommit_memory: dirty_background_bytes
This value contains a flag that enables memory overcommitment. Contains the amount of dirty memory at which the pdflush background writeback
daemon will start writeback.
When this flag is 0, the kernel attempts to estimate the amount If dirty_background_bytes is written, dirty_background_ratio becomes a function
of free memory left when userspace requests more memory. of its value (dirty_background_bytes / the amount of dirtyable system memory).
When this flag is 1, the kernel pretends there is always enough
memory until it actually runs out.
When this flag is 2, the kernel uses a "never overcommit"
policy that attempts to prevent any overcommit of memory.
This feature can be very useful because there are a lot of
programs that malloc() huge amounts of memory "just-in-case"
and don't use much of it.
The default value is 0.
See Documentation/vm/overcommit-accounting and
security/commoncap.c::cap_vm_enough_memory() for more information.
============================================================== ==============================================================
overcommit_ratio: dirty_background_ratio
When overcommit_memory is set to 2, the committed address Contains, as a percentage of total system memory, the number of pages at which
space is not permitted to exceed swap plus this percentage the pdflush background writeback daemon will start writing out dirty data.
of physical RAM. See above.
============================================================== ==============================================================
page-cluster: dirty_bytes
The Linux VM subsystem avoids excessive disk seeks by reading Contains the amount of dirty memory at which a process generating disk writes
multiple pages on a page fault. The number of pages it reads will itself start writeback.
is dependent on the amount of memory in your machine.
The number of pages the kernel reads in at once is equal to If dirty_bytes is written, dirty_ratio becomes a function of its value
2 ^ page-cluster. Values above 2 ^ 5 don't make much sense (dirty_bytes / the amount of dirtyable system memory).
for swap because we only cluster swap data in 32-page groups.
==============================================================
dirty_expire_centisecs
This tunable is used to define when dirty data is old enough to be eligible
for writeout by the pdflush daemons. It is expressed in 100'ths of a second.
Data which has been dirty in-memory for longer than this interval will be
written out next time a pdflush daemon wakes up.
==============================================================
dirty_ratio
Contains, as a percentage of total system memory, the number of pages at which
a process which is generating disk writes will itself start writing out dirty
data.
==============================================================
dirty_writeback_centisecs
The pdflush writeback daemons will periodically wake up and write `old' data
out to disk. This tunable expresses the interval between those wakeups, in
100'ths of a second.
Setting this to zero disables periodic writeback altogether.
==============================================================
drop_caches
Writing to this will cause the kernel to drop clean caches, dentries and
inodes from memory, causing that memory to become free.
To free pagecache:
echo 1 > /proc/sys/vm/drop_caches
To free dentries and inodes:
echo 2 > /proc/sys/vm/drop_caches
To free pagecache, dentries and inodes:
echo 3 > /proc/sys/vm/drop_caches
As this is a non-destructive operation and dirty objects are not freeable, the
user should run `sync' first.
==============================================================
hugepages_treat_as_movable
This parameter is only useful when kernelcore= is specified at boot time to
create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
value written to hugepages_treat_as_movable allows huge pages to be allocated
from ZONE_MOVABLE.
Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
pages pool can easily grow or shrink within. Assuming that applications are
not running that mlock() a lot of memory, it is likely the huge pages pool
can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
into nr_hugepages and triggering page reclaim.
==============================================================
hugetlb_shm_group
hugetlb_shm_group contains group id that is allowed to create SysV
shared memory segment using hugetlb page.
==============================================================
laptop_mode
laptop_mode is a knob that controls "laptop mode". All the things that are
controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
==============================================================
legacy_va_layout
If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
will use the legacy (2.4) layout for all processes.
==============================================================
lowmem_reserve_ratio
For some specialised workloads on highmem machines it is dangerous for
the kernel to allow process memory to be allocated from the "lowmem"
zone. This is because that memory could then be pinned via the mlock()
system call, or by unavailability of swapspace.
And on large highmem machines this lack of reclaimable lowmem memory
can be fatal.
So the Linux page allocator has a mechanism which prevents allocations
which _could_ use highmem from using too much lowmem. This means that
a certain amount of lowmem is defended from the possibility of being
captured into pinned user memory.
(The same argument applies to the old 16 megabyte ISA DMA region. This
mechanism will also defend that region from allocations which could use
highmem or lowmem).
The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
in defending these lower zones.
If you have a machine which uses highmem or ISA DMA and your
applications are using mlock(), or if you are running with no swap then
you probably should change the lowmem_reserve_ratio setting.
The lowmem_reserve_ratio is an array. You can see them by reading this file.
-
% cat /proc/sys/vm/lowmem_reserve_ratio
256 256 32
-
Note: # of this elements is one fewer than number of zones. Because the highest
zone's value is not necessary for following calculation.
But, these values are not used directly. The kernel calculates # of protection
pages for each zones from them. These are shown as array of protection pages
in /proc/zoneinfo like followings. (This is an example of x86-64 box).
Each zone has an array of protection pages like this.
-
Node 0, zone DMA
pages free 1355
min 3
low 3
high 4
:
:
numa_other 0
protection: (0, 2004, 2004, 2004)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
pagesets
cpu: 0 pcp: 0
:
-
These protections are added to score to judge whether this zone should be used
for page allocation or should be reclaimed.
In this example, if normal pages (index=2) are required to this DMA zone and
pages_high is used for watermark, the kernel judges this zone should not be
used because pages_free(1355) is smaller than watermark + protection[2]
(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
normal page requirement. If requirement is DMA zone(index=0), protection[0]
(=0) is used.
zone[i]'s protection[j] is calculated by following expression.
(i < j):
zone[i]->protection[j]
= (total sums of present_pages from zone[i+1] to zone[j] on the node)
/ lowmem_reserve_ratio[i];
(i = j):
(should not be protected. = 0;
(i > j):
(not necessary, but looks 0)
The default values of lowmem_reserve_ratio[i] are
256 (if zone[i] means DMA or DMA32 zone)
32 (others).
As above expression, they are reciprocal number of ratio.
256 means 1/256. # of protection pages becomes about "0.39%" of total present
pages of higher zones on the node.
If you would like to protect more pages, smaller values are effective.
The minimum value is 1 (1/1 -> 100%).
============================================================== ==============================================================
@@ -113,9 +275,9 @@ The default value is 65536.
min_free_kbytes: min_free_kbytes:
This is used to force the Linux VM to keep a minimum number This is used to force the Linux VM to keep a minimum number
of kilobytes free. The VM uses this number to compute a pages_min of kilobytes free. The VM uses this number to compute a pages_min
value for each lowmem zone in the system. Each lowmem zone gets value for each lowmem zone in the system. Each lowmem zone gets
a number of reserved free pages based proportionally on its size. a number of reserved free pages based proportionally on its size.
Some minimal amount of memory is needed to satisfy PF_MEMALLOC Some minimal amount of memory is needed to satisfy PF_MEMALLOC
@@ -124,73 +286,6 @@ become subtly broken, and prone to deadlock under high loads.
Setting this too high will OOM your machine instantly. Setting this too high will OOM your machine instantly.
==============================================================
percpu_pagelist_fraction
This is the fraction of pages at most (high mark pcp->high) in each zone that
are allocated for each per cpu page list. The min value for this is 8. It
means that we don't allow more than 1/8th of pages in each zone to be
allocated in any single per_cpu_pagelist. This entry only changes the value
of hot per cpu pagelists. User can specify a number like 100 to allocate
1/100th of each zone to each per cpu page list.
The batch value of each per cpu pagelist is also updated as a result. It is
set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8)
The initial value is zero. Kernel does not use this value at boot time to set
the high water marks for each per cpu page list.
===============================================================
zone_reclaim_mode:
Zone_reclaim_mode allows someone to set more or less aggressive approaches to
reclaim memory when a zone runs out of memory. If it is set to zero then no
zone reclaim occurs. Allocations will be satisfied from other zones / nodes
in the system.
This is value ORed together of
1 = Zone reclaim on
2 = Zone reclaim writes dirty pages out
4 = Zone reclaim swaps pages
zone_reclaim_mode is set during bootup to 1 if it is determined that pages
from remote zones will cause a measurable performance reduction. The
page allocator will then reclaim easily reusable pages (those page
cache pages that are currently not used) before allocating off node pages.
It may be beneficial to switch off zone reclaim if the system is
used for a file server and all of memory should be used for caching files
from disk. In that case the caching effect is more important than
data locality.
Allowing zone reclaim to write out pages stops processes that are
writing large amounts of data from dirtying pages on other nodes. Zone
reclaim will write out dirty pages if a zone fills up and so effectively
throttle the process. This may decrease the performance of a single process
since it cannot use all of system memory to buffer the outgoing writes
anymore but it preserve the memory on other nodes so that the performance
of other processes running on other nodes will not be affected.
Allowing regular swap effectively restricts allocations to the local
node unless explicitly overridden by memory policies or cpuset
configurations.
=============================================================
min_unmapped_ratio:
This is available only on NUMA kernels.
A percentage of the total pages in each zone. Zone reclaim will only
occur if more than this percentage of pages are file backed and unmapped.
This is to insure that a minimal amount of local pages is still available for
file I/O even if the node is overallocated.
The default is 1 percent.
============================================================= =============================================================
min_slab_ratio: min_slab_ratio:
@@ -211,69 +306,16 @@ and may not be fast.
============================================================= =============================================================
panic_on_oom min_unmapped_ratio:
This enables or disables panic on out-of-memory feature. This is available only on NUMA kernels.
If this is set to 0, the kernel will kill some rogue process, A percentage of the total pages in each zone. Zone reclaim will only
called oom_killer. Usually, oom_killer can kill rogue processes and occur if more than this percentage of pages are file backed and unmapped.
system will survive. This is to insure that a minimal amount of local pages is still available for
file I/O even if the node is overallocated.
If this is set to 1, the kernel panics when out-of-memory happens. The default is 1 percent.
However, if a process limits using nodes by mempolicy/cpusets,
and those nodes become memory exhaustion status, one process
may be killed by oom-killer. No panic occurs in this case.
Because other nodes' memory may be free. This means system total status
may be not fatal yet.
If this is set to 2, the kernel panics compulsorily even on the
above-mentioned.
The default value is 0.
1 and 2 are for failover of clustering. Please select either
according to your policy of failover.
=============================================================
oom_dump_tasks
Enables a system-wide task dump (excluding kernel threads) to be
produced when the kernel performs an OOM-killing and includes such
information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
name. This is helpful to determine why the OOM killer was invoked
and to identify the rogue task that caused it.
If this is set to zero, this information is suppressed. On very
large systems with thousands of tasks it may not be feasible to dump
the memory state information for each one. Such systems should not
be forced to incur a performance penalty in OOM conditions when the
information may not be desired.
If this is set to non-zero, this information is shown whenever the
OOM killer actually kills a memory-hogging task.
The default value is 0.
=============================================================
oom_kill_allocating_task
This enables or disables killing the OOM-triggering task in
out-of-memory situations.
If this is set to zero, the OOM killer will scan through the entire
tasklist and select a task based on heuristics to kill. This normally
selects a rogue memory-hogging task that frees up a large amount of
memory when killed.
If this is set to non-zero, the OOM killer simply kills the task that
triggered the out-of-memory condition. This avoids the expensive
tasklist scan.
If panic_on_oom is selected, it takes precedence over whatever value
is used in oom_kill_allocating_task.
The default value is 0.
============================================================== ==============================================================
@@ -290,6 +332,50 @@ against future potential kernel bugs.
============================================================== ==============================================================
nr_hugepages
Change the minimum size of the hugepage pool.
See Documentation/vm/hugetlbpage.txt
==============================================================
nr_overcommit_hugepages
Change the maximum size of the hugepage pool. The maximum is
nr_hugepages + nr_overcommit_hugepages.
See Documentation/vm/hugetlbpage.txt
==============================================================
nr_pdflush_threads
The current number of pdflush threads. This value is read-only.
The value changes according to the number of dirty pages in the system.
When neccessary, additional pdflush threads are created, one per second, up to
nr_pdflush_threads_max.
==============================================================
nr_trim_pages
This is available only on NOMMU kernels.
This value adjusts the excess page trimming behaviour of power-of-2 aligned
NOMMU mmap allocations.
A value of 0 disables trimming of allocations entirely, while a value of 1
trims excess pages aggressively. Any value >= 1 acts as the watermark where
trimming of allocations is initiated.
The default value is 1.
See Documentation/nommu-mmap.txt for more information.
==============================================================
numa_zonelist_order numa_zonelist_order
This sysctl is only for NUMA. This sysctl is only for NUMA.
@@ -335,34 +421,199 @@ this is causing problems for your system/application.
============================================================== ==============================================================
nr_hugepages oom_dump_tasks
Change the minimum size of the hugepage pool. Enables a system-wide task dump (excluding kernel threads) to be
produced when the kernel performs an OOM-killing and includes such
information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
name. This is helpful to determine why the OOM killer was invoked
and to identify the rogue task that caused it.
See Documentation/vm/hugetlbpage.txt If this is set to zero, this information is suppressed. On very
large systems with thousands of tasks it may not be feasible to dump
the memory state information for each one. Such systems should not
be forced to incur a performance penalty in OOM conditions when the
information may not be desired.
If this is set to non-zero, this information is shown whenever the
OOM killer actually kills a memory-hogging task.
The default value is 0.
============================================================== ==============================================================
nr_overcommit_hugepages oom_kill_allocating_task
Change the maximum size of the hugepage pool. The maximum is This enables or disables killing the OOM-triggering task in
nr_hugepages + nr_overcommit_hugepages. out-of-memory situations.
See Documentation/vm/hugetlbpage.txt If this is set to zero, the OOM killer will scan through the entire
tasklist and select a task based on heuristics to kill. This normally
selects a rogue memory-hogging task that frees up a large amount of
memory when killed.
If this is set to non-zero, the OOM killer simply kills the task that
triggered the out-of-memory condition. This avoids the expensive
tasklist scan.
If panic_on_oom is selected, it takes precedence over whatever value
is used in oom_kill_allocating_task.
The default value is 0.
============================================================== ==============================================================
nr_trim_pages overcommit_memory:
This is available only on NOMMU kernels. This value contains a flag that enables memory overcommitment.
This value adjusts the excess page trimming behaviour of power-of-2 aligned When this flag is 0, the kernel attempts to estimate the amount
NOMMU mmap allocations. of free memory left when userspace requests more memory.
A value of 0 disables trimming of allocations entirely, while a value of 1 When this flag is 1, the kernel pretends there is always enough
trims excess pages aggressively. Any value >= 1 acts as the watermark where memory until it actually runs out.
trimming of allocations is initiated.
The default value is 1. When this flag is 2, the kernel uses a "never overcommit"
policy that attempts to prevent any overcommit of memory.
See Documentation/nommu-mmap.txt for more information. This feature can be very useful because there are a lot of
programs that malloc() huge amounts of memory "just-in-case"
and don't use much of it.
The default value is 0.
See Documentation/vm/overcommit-accounting and
security/commoncap.c::cap_vm_enough_memory() for more information.
==============================================================
overcommit_ratio:
When overcommit_memory is set to 2, the committed address
space is not permitted to exceed swap plus this percentage
of physical RAM. See above.
==============================================================
page-cluster
page-cluster controls the number of pages which are written to swap in
a single attempt. The swap I/O size.
It is a logarithmic value - setting it to zero means "1 page", setting
it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
The default value is three (eight pages at a time). There may be some
small benefits in tuning this to a different value if your workload is
swap-intensive.
=============================================================
panic_on_oom
This enables or disables panic on out-of-memory feature.
If this is set to 0, the kernel will kill some rogue process,
called oom_killer. Usually, oom_killer can kill rogue processes and
system will survive.
If this is set to 1, the kernel panics when out-of-memory happens.
However, if a process limits using nodes by mempolicy/cpusets,
and those nodes become memory exhaustion status, one process
may be killed by oom-killer. No panic occurs in this case.
Because other nodes' memory may be free. This means system total status
may be not fatal yet.
If this is set to 2, the kernel panics compulsorily even on the
above-mentioned.
The default value is 0.
1 and 2 are for failover of clustering. Please select either
according to your policy of failover.
=============================================================
percpu_pagelist_fraction
This is the fraction of pages at most (high mark pcp->high) in each zone that
are allocated for each per cpu page list. The min value for this is 8. It
means that we don't allow more than 1/8th of pages in each zone to be
allocated in any single per_cpu_pagelist. This entry only changes the value
of hot per cpu pagelists. User can specify a number like 100 to allocate
1/100th of each zone to each per cpu page list.
The batch value of each per cpu pagelist is also updated as a result. It is
set to pcp->high/4. The upper limit of batch is (PAGE_SHIFT * 8)
The initial value is zero. Kernel does not use this value at boot time to set
the high water marks for each per cpu page list.
==============================================================
stat_interval
The time interval between which vm statistics are updated. The default
is 1 second.
==============================================================
swappiness
This control is used to define how aggressive the kernel will swap
memory pages. Higher values will increase agressiveness, lower values
descrease the amount of swap.
The default value is 60.
==============================================================
vfs_cache_pressure
------------------
Controls the tendency of the kernel to reclaim the memory which is used for
caching of directory and inode objects.
At the default value of vfs_cache_pressure=100 the kernel will attempt to
reclaim dentries and inodes at a "fair" rate with respect to pagecache and
swapcache reclaim. Decreasing vfs_cache_pressure causes the kernel to prefer
to retain dentry and inode caches. Increasing vfs_cache_pressure beyond 100
causes the kernel to prefer to reclaim dentries and inodes.
==============================================================
zone_reclaim_mode:
Zone_reclaim_mode allows someone to set more or less aggressive approaches to
reclaim memory when a zone runs out of memory. If it is set to zero then no
zone reclaim occurs. Allocations will be satisfied from other zones / nodes
in the system.
This is value ORed together of
1 = Zone reclaim on
2 = Zone reclaim writes dirty pages out
4 = Zone reclaim swaps pages
zone_reclaim_mode is set during bootup to 1 if it is determined that pages
from remote zones will cause a measurable performance reduction. The
page allocator will then reclaim easily reusable pages (those page
cache pages that are currently not used) before allocating off node pages.
It may be beneficial to switch off zone reclaim if the system is
used for a file server and all of memory should be used for caching files
from disk. In that case the caching effect is more important than
data locality.
Allowing zone reclaim to write out pages stops processes that are
writing large amounts of data from dirtying pages on other nodes. Zone
reclaim will write out dirty pages if a zone fills up and so effectively
throttle the process. This may decrease the performance of a single process
since it cannot use all of system memory to buffer the outgoing writes
anymore but it preserve the memory on other nodes so that the performance
of other processes running on other nodes will not be affected.
Allowing regular swap effectively restricts allocations to the local
node unless explicitly overridden by memory policies or cpuset
configurations.
============ End of Document =================================

19
Documentation/sysrq.txt
View File

@@ -1,6 +1,5 @@
Linux Magic System Request Key Hacks Linux Magic System Request Key Hacks
Documentation for sysrq.c Documentation for sysrq.c
Last update: 2007-AUG-04
* What is the magic SysRq key? * What is the magic SysRq key?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -211,6 +210,24 @@ within a function called by handle_sysrq, you must be aware that you are in
a lock (you are also in an interrupt handler, which means don't sleep!), so a lock (you are also in an interrupt handler, which means don't sleep!), so
you must call __handle_sysrq_nolock instead. you must call __handle_sysrq_nolock instead.
* When I hit a SysRq key combination only the header appears on the console?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sysrq output is subject to the same console loglevel control as all
other console output. This means that if the kernel was booted 'quiet'
as is common on distro kernels the output may not appear on the actual
console, even though it will appear in the dmesg buffer, and be accessible
via the dmesg command and to the consumers of /proc/kmsg. As a specific
exception the header line from the sysrq command is passed to all console
consumers as if the current loglevel was maximum. If only the header
is emitted it is almost certain that the kernel loglevel is too low.
Should you require the output on the console channel then you will need
to temporarily up the console loglevel using alt-sysrq-8 or:
echo 8 > /proc/sysrq-trigger
Remember to return the loglevel to normal after triggering the sysrq
command you are interested in.
* I have more questions, who can I ask? * I have more questions, who can I ask?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And I'll answer any questions about the registration system you got, also And I'll answer any questions about the registration system you got, also

22
MAINTAINERS
View File

@@ -1581,6 +1581,13 @@ L: bluesmoke-devel@lists.sourceforge.net
W: bluesmoke.sourceforge.net W: bluesmoke.sourceforge.net
S: Maintained S: Maintained
EDAC-I5400
P: Mauro Carvalho Chehab
M: mchehab@redhat.com
L: bluesmoke-devel@lists.sourceforge.net
W: bluesmoke.sourceforge.net
S: Maintained
EDAC-I82975X EDAC-I82975X
P: Ranganathan Desikan P: Ranganathan Desikan
P: Arvind R. P: Arvind R.
@@ -1814,6 +1821,14 @@ M: hch@infradead.org
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
S: Maintained S: Maintained
FREEZER
P: Pavel Machek
M: pavel@suse.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
S: Supported
FTRACE FTRACE
P: Steven Rostedt P: Steven Rostedt
M: rostedt@goodmis.org M: rostedt@goodmis.org
@@ -2087,7 +2102,8 @@ M: khali@linux-fr.org
P: Ben Dooks (embedded platforms) P: Ben Dooks (embedded platforms)
M: ben-linux@fluff.org M: ben-linux@fluff.org
L: linux-i2c@vger.kernel.org L: linux-i2c@vger.kernel.org
T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/ W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
S: Maintained S: Maintained
I2C-TINY-USB DRIVER I2C-TINY-USB DRIVER
@@ -4842,11 +4858,11 @@ S: Supported
XFS FILESYSTEM XFS FILESYSTEM
P: Silicon Graphics Inc P: Silicon Graphics Inc
P: Tim Shimmin P: Bill O'Donnell
M: xfs-masters@oss.sgi.com M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs W: http://oss.sgi.com/projects/xfs
T: git git://oss.sgi.com:8090/xfs/xfs-2.6.git T: git://oss.sgi.com/xfs/xfs.git
S: Supported S: Supported
XILINX SYSTEMACE DRIVER XILINX SYSTEMACE DRIVER

65
Makefile
View File

@@ -1,7 +1,7 @@
VERSION = 2 VERSION = 2
PATCHLEVEL = 6 PATCHLEVEL = 6
SUBLEVEL = 29 SUBLEVEL = 29
EXTRAVERSION = -rc1 EXTRAVERSION = -rc3
NAME = Erotic Pickled Herring NAME = Erotic Pickled Herring
# *DOCUMENTATION* # *DOCUMENTATION*
@@ -213,6 +213,10 @@ endif
# Where to locate arch specific headers # Where to locate arch specific headers
hdr-arch := $(SRCARCH) hdr-arch := $(SRCARCH)
ifeq ($(ARCH),m68knommu)
hdr-arch := m68k
endif
KCONFIG_CONFIG ?= .config KCONFIG_CONFIG ?= .config
# SHELL used by kbuild # SHELL used by kbuild
@@ -606,25 +610,20 @@ export INSTALL_PATH ?= /boot
MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB export MODLIB
strip-symbols := $(srctree)/scripts/strip-symbols \
$(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols)
# #
# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while # INSTALL_MOD_STRIP, if defined, will cause modules to be
# they get installed. If INSTALL_MOD_STRIP is '1', then the default # stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
# options (see below) will be used. Otherwise, INSTALL_MOD_STRIP will # the default option --strip-debug will be used. Otherwise,
# be used as the option(s) to the objcopy command. # INSTALL_MOD_STRIP will used as the options to the strip command.
ifdef INSTALL_MOD_STRIP ifdef INSTALL_MOD_STRIP
ifeq ($(INSTALL_MOD_STRIP),1) ifeq ($(INSTALL_MOD_STRIP),1)
mod_strip_cmd = $(OBJCOPY) --strip-debug mod_strip_cmd = $(STRIP) --strip-debug
ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED))
mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols))
endif
else else
mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP) mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
endif # INSTALL_MOD_STRIP=1 endif # INSTALL_MOD_STRIP=1
else else
mod_strip_cmd = false mod_strip_cmd = true
endif # INSTALL_MOD_STRIP endif # INSTALL_MOD_STRIP
export mod_strip_cmd export mod_strip_cmd
@@ -754,7 +753,6 @@ last_kallsyms := 2
endif endif
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h)
define verify_kallsyms define verify_kallsyms
$(Q)$(if $($(quiet)cmd_sysmap), \ $(Q)$(if $($(quiet)cmd_sysmap), \
@@ -779,41 +777,24 @@ endef
# Generate .S file with all kernel symbols # Generate .S file with all kernel symbols
quiet_cmd_kallsyms = KSYM $@ quiet_cmd_kallsyms = KSYM $@
cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \ cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
| $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@ $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
quiet_cmd_kstrip = STRIP $@ .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@
$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute
$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE
$(call if_changed_dep,as_o_S) $(call if_changed_dep,as_o_S)
ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y) .tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
strip-ext := .stripped
endif
.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h)
$(call cmd,kallsyms) $(call cmd,kallsyms)
# make -jN seems to have problems with intermediate files, see bug #3330.
.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped)
.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h)
$(call cmd,kstrip)
ifneq ($(CONFIG_DEBUG_INFO),y)
.tmp_vmlinux%: LDFLAGS_vmlinux += -S
endif
# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE .tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
$(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__)) $(call if_changed_rule,ksym_ld)
.tmp_vmlinux0$(strip-ext): .tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
$(Q)echo "placeholder" >$@ $(call if_changed,vmlinux__)
.tmp_vmlinux1: .tmp_kallsyms0.o .tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
.tmp_vmlinux2: .tmp_kallsyms1.o $(call if_changed,vmlinux__)
.tmp_vmlinux3: .tmp_kallsyms2.o
# Needs to visit scripts/ before $(KALLSYMS) can be used. # Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ; $(KALLSYMS): scripts ;

3
arch/Kconfig
View File

@@ -62,6 +62,9 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
See Documentation/unaligned-memory-access.txt for more See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses. information on the topic of unaligned memory accesses.
config HAVE_SYSCALL_WRAPPERS
bool
config KRETPROBES config KRETPROBES
def_bool y def_bool y
depends on KPROBES && HAVE_KRETPROBES depends on KPROBES && HAVE_KRETPROBES

1
arch/alpha/include/asm/Kbuild
View File

@@ -9,4 +9,3 @@ unifdef-y += console.h
unifdef-y += fpu.h unifdef-y += fpu.h
unifdef-y += sysinfo.h unifdef-y += sysinfo.h
unifdef-y += compiler.h unifdef-y += compiler.h
unifdef-y += swab.h

1
arch/alpha/include/asm/byteorder.h
View File

@@ -1,7 +1,6 @@
#ifndef _ALPHA_BYTEORDER_H #ifndef _ALPHA_BYTEORDER_H
#define _ALPHA_BYTEORDER_H #define _ALPHA_BYTEORDER_H
#include <asm/swab.h>
#include <linux/byteorder/little_endian.h> #include <linux/byteorder/little_endian.h>
#endif /* _ALPHA_BYTEORDER_H */ #endif /* _ALPHA_BYTEORDER_H */

4
arch/alpha/include/asm/machvec.h
View File

@@ -21,6 +21,7 @@ struct pci_dev;
struct pci_ops; struct pci_ops;
struct pci_controller; struct pci_controller;
struct _alpha_agp_info; struct _alpha_agp_info;
struct rtc_time;
struct alpha_machine_vector struct alpha_machine_vector
{ {
@@ -94,6 +95,9 @@ struct alpha_machine_vector
struct _alpha_agp_info *(*agp_info)(void); struct _alpha_agp_info *(*agp_info)(void);
unsigned int (*rtc_get_time)(struct rtc_time *);
int (*rtc_set_time)(struct rtc_time *);
const char *vector_name; const char *vector_name;
/* NUMA information */ /* NUMA information */

7
arch/alpha/include/asm/pgalloc.h
View File

@@ -50,7 +50,12 @@ pmd_free(struct mm_struct *mm, pmd_t *pmd)
free_page((unsigned long)pmd); free_page((unsigned long)pmd);
} }
extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); static inline pte_t *
pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
{
pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
return pte;
}
static inline void static inline void
pte_free_kernel(struct mm_struct *mm, pte_t *pte) pte_free_kernel(struct mm_struct *mm, pte_t *pte)

12
arch/alpha/include/asm/rtc.h
View File

@@ -1,9 +1,15 @@
#ifndef _ALPHA_RTC_H #ifndef _ALPHA_RTC_H
#define _ALPHA_RTC_H #define _ALPHA_RTC_H
/* #if defined(CONFIG_ALPHA_GENERIC)
* Alpha uses the default access methods for the RTC. # define get_rtc_time alpha_mv.rtc_get_time
*/ # define set_rtc_time alpha_mv.rtc_set_time
#else
# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
# define get_rtc_time marvel_get_rtc_time
# define set_rtc_time marvel_set_rtc_time
# endif
#endif
#include <asm-generic/rtc.h> #include <asm-generic/rtc.h>

1
arch/alpha/kernel/.gitignore vendored Normal file
View File

@@ -0,0 +1 @@
vmlinux.lds

10
arch/alpha/kernel/core_marvel.c
View File

@@ -658,16 +658,8 @@ __marvel_rtc_io(u8 b, unsigned long addr, int write)
rtc_access.data = bcd2bin(b); rtc_access.data = bcd2bin(b);
rtc_access.function = 0x48 + !write; /* GET/PUT_TOY */ rtc_access.function = 0x48 + !write; /* GET/PUT_TOY */
#ifdef CONFIG_SMP
if (smp_processor_id() != boot_cpuid)
smp_call_function_single(boot_cpuid,
__marvel_access_rtc,
&rtc_access, 1);
else
__marvel_access_rtc(&rtc_access);
#else
__marvel_access_rtc(&rtc_access); __marvel_access_rtc(&rtc_access);
#endif
ret = bin2bcd(rtc_access.data); ret = bin2bcd(rtc_access.data);
break; break;

8
arch/alpha/kernel/entry.S
View File

@@ -896,9 +896,9 @@ sys_getxpid:
.end sys_getxpid .end sys_getxpid
.align 4 .align 4
.globl sys_pipe .globl sys_alpha_pipe
.ent sys_pipe .ent sys_alpha_pipe
sys_pipe: sys_alpha_pipe:
lda $sp, -16($sp) lda $sp, -16($sp)
stq $26, 0($sp) stq $26, 0($sp)
.prologue 0 .prologue 0
@@ -916,7 +916,7 @@ sys_pipe:
stq $1, 80+16($sp) stq $1, 80+16($sp)
1: lda $sp, 16($sp) 1: lda $sp, 16($sp)
ret ret
.end sys_pipe .end sys_alpha_pipe
.align 4 .align 4
.globl sys_execve .globl sys_execve

2
arch/alpha/kernel/irq_srm.c
View File

@@ -63,6 +63,8 @@ init_srm_irqs(long max, unsigned long ignore_mask)
{ {
long i; long i;
if (NR_IRQS <= 16)
return;
for (i = 16; i < max; ++i) { for (i = 16; i < max; ++i) {
if (i < 64 && ((ignore_mask >> i) & 1)) if (i < 64 && ((ignore_mask >> i) & 1))
continue; continue;

5
arch/alpha/kernel/machvec_impl.h
View File

@@ -40,7 +40,10 @@
#define CAT1(x,y) x##y #define CAT1(x,y) x##y
#define CAT(x,y) CAT1(x,y) #define CAT(x,y) CAT1(x,y)
#define DO_DEFAULT_RTC .rtc_port = 0x70 #define DO_DEFAULT_RTC \
.rtc_port = 0x70, \
.rtc_get_time = common_get_rtc_time, \
.rtc_set_time = common_set_rtc_time
#define DO_EV4_MMU \ #define DO_EV4_MMU \
.max_asn = EV4_MAX_ASN, \ .max_asn = EV4_MAX_ASN, \

2
arch/alpha/kernel/proto.h
View File

@@ -145,6 +145,8 @@ extern void smp_percpu_timer_interrupt(struct pt_regs *);
extern irqreturn_t timer_interrupt(int irq, void *dev); extern irqreturn_t timer_interrupt(int irq, void *dev);
extern void common_init_rtc(void); extern void common_init_rtc(void);
extern unsigned long est_cycle_freq; extern unsigned long est_cycle_freq;
extern unsigned int common_get_rtc_time(struct rtc_time *time);
extern int common_set_rtc_time(struct rtc_time *time);
/* smc37c93x.c */ /* smc37c93x.c */
extern void SMC93x_Init(void); extern void SMC93x_Init(void);

2
arch/alpha/kernel/sys_jensen.c
View File

@@ -261,6 +261,8 @@ struct alpha_machine_vector jensen_mv __initmv = {
.machine_check = jensen_machine_check, .machine_check = jensen_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.rtc_port = 0x170, .rtc_port = 0x170,
.rtc_get_time = common_get_rtc_time,
.rtc_set_time = common_set_rtc_time,
.nr_irqs = 16, .nr_irqs = 16,
.device_interrupt = jensen_device_interrupt, .device_interrupt = jensen_device_interrupt,

56
arch/alpha/kernel/sys_marvel.c
View File

@@ -23,6 +23,7 @@
#include <asm/hwrpb.h> #include <asm/hwrpb.h>
#include <asm/tlbflush.h> #include <asm/tlbflush.h>
#include <asm/vga.h> #include <asm/vga.h>
#include <asm/rtc.h>
#include "proto.h" #include "proto.h"
#include "err_impl.h" #include "err_impl.h"
@@ -426,6 +427,57 @@ marvel_init_rtc(void)
init_rtc_irq(); init_rtc_irq();
} }
struct marvel_rtc_time {
struct rtc_time *time;
int retval;
};
#ifdef CONFIG_SMP
static void
smp_get_rtc_time(void *data)
{
struct marvel_rtc_time *mrt = data;
mrt->retval = __get_rtc_time(mrt->time);
}
static void
smp_set_rtc_time(void *data)
{
struct marvel_rtc_time *mrt = data;
mrt->retval = __set_rtc_time(mrt->time);
}
#endif
static unsigned int
marvel_get_rtc_time(struct rtc_time *time)
{
#ifdef CONFIG_SMP
struct marvel_rtc_time mrt;
if (smp_processor_id() != boot_cpuid) {
mrt.time = time;
smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
return mrt.retval;
}
#endif
return __get_rtc_time(time);
}
static int
marvel_set_rtc_time(struct rtc_time *time)
{
#ifdef CONFIG_SMP
struct marvel_rtc_time mrt;
if (smp_processor_id() != boot_cpuid) {
mrt.time = time;
smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
return mrt.retval;
}
#endif
return __set_rtc_time(time);
}
static void static void
marvel_smp_callin(void) marvel_smp_callin(void)
{ {
@@ -466,7 +518,9 @@ marvel_smp_callin(void)
struct alpha_machine_vector marvel_ev7_mv __initmv = { struct alpha_machine_vector marvel_ev7_mv __initmv = {
.vector_name = "MARVEL/EV7", .vector_name = "MARVEL/EV7",
DO_EV7_MMU, DO_EV7_MMU,
DO_DEFAULT_RTC, .rtc_port = 0x70,
.rtc_get_time = marvel_get_rtc_time,
.rtc_set_time = marvel_set_rtc_time,
DO_MARVEL_IO, DO_MARVEL_IO,
.machine_check = marvel_machine_check, .machine_check = marvel_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,

4
arch/alpha/kernel/sys_nautilus.c
View File

@@ -245,6 +245,10 @@ nautilus_init_pci(void)
IRONGATE0->pci_mem = pci_mem; IRONGATE0->pci_mem = pci_mem;
pci_bus_assign_resources(bus); pci_bus_assign_resources(bus);
/* pci_common_swizzle() relies on bus->self being NULL
for the root bus, so just clear it. */
bus->self = NULL;
pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq); pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
} }

2
arch/alpha/kernel/systbls.S
View File

@@ -52,7 +52,7 @@ sys_call_table:
.quad sys_setpgid .quad sys_setpgid
.quad alpha_ni_syscall /* 40 */ .quad alpha_ni_syscall /* 40 */
.quad sys_dup .quad sys_dup
.quad sys_pipe .quad sys_alpha_pipe
.quad osf_set_program_attributes .quad osf_set_program_attributes
.quad alpha_ni_syscall .quad alpha_ni_syscall
.quad sys_open /* 45 */ .quad sys_open /* 45 */

10
arch/alpha/kernel/time.c
View File

@@ -46,6 +46,7 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/hwrpb.h> #include <asm/hwrpb.h>
#include <asm/8253pit.h> #include <asm/8253pit.h>
#include <asm/rtc.h>
#include <linux/mc146818rtc.h> #include <linux/mc146818rtc.h>
#include <linux/time.h> #include <linux/time.h>
@@ -180,6 +181,15 @@ common_init_rtc(void)
init_rtc_irq(); init_rtc_irq();
} }
unsigned int common_get_rtc_time(struct rtc_time *time)
{
return __get_rtc_time(time);
}
int common_set_rtc_time(struct rtc_time *time)
{
return __set_rtc_time(time);
}
/* Validate a computed cycle counter result against the known bounds for /* Validate a computed cycle counter result against the known bounds for
the given processor core. There's too much brokenness in the way of the given processor core. There's too much brokenness in the way of

7
arch/alpha/mm/init.c
View File

@@ -59,13 +59,6 @@ pgd_alloc(struct mm_struct *mm)
return ret; return ret;
} }
pte_t *
pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
{
pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
return pte;
}
/* /*
* BAD_PAGE is the page that is used for page faults when linux * BAD_PAGE is the page that is used for page faults when linux

25
arch/arm/common/clkdev.c
View File

@@ -24,6 +24,15 @@
static LIST_HEAD(clocks); static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex); static DEFINE_MUTEX(clocks_mutex);
/*
* Find the correct struct clk for the device and connection ID.
* We do slightly fuzzy matching here:
* An entry with a NULL ID is assumed to be a wildcard.
* If an entry has a device ID, it must match
* If an entry has a connection ID, it must match
* Then we take the most specific entry - with the following
* order of precidence: dev+con > dev only > con only.
*/
static struct clk *clk_find(const char *dev_id, const char *con_id) static struct clk *clk_find(const char *dev_id, const char *con_id)
{ {
struct clk_lookup *p; struct clk_lookup *p;
@@ -31,13 +40,17 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
int match, best = 0; int match, best = 0;
list_for_each_entry(p, &clocks, node) { list_for_each_entry(p, &clocks, node) {
if ((p->dev_id && !dev_id) || (p->con_id && !con_id))
continue;
match = 0; match = 0;
if (p->dev_id) if (p->dev_id) {
match += 2 * (strcmp(p->dev_id, dev_id) == 0); if (!dev_id || strcmp(p->dev_id, dev_id))
if (p->con_id) continue;
match += 1 * (strcmp(p->con_id, con_id) == 0); match += 2;
}
if (p->con_id) {
if (!con_id || strcmp(p->con_id, con_id))
continue;
match += 1;
}
if (match == 0) if (match == 0)
continue; continue;

6
arch/arm/configs/afeb9260_defconfig
View File

@@ -719,8 +719,8 @@ CONFIG_I2C_GPIO=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
CONFIG_AT24=y CONFIG_EEPROM_AT24=y
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
@@ -744,7 +744,7 @@ CONFIG_SPI_ATMEL=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

2
arch/arm/configs/ams_delta_defconfig
View File

@@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

4
arch/arm/configs/at91cap9adk_defconfig
View File

@@ -676,7 +676,7 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -703,7 +703,7 @@ CONFIG_SPI_ATMEL=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

2
arch/arm/configs/at91rm9200dk_defconfig
View File

@@ -636,7 +636,7 @@ CONFIG_I2C_GPIO=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/at91rm9200ek_defconfig
View File

@@ -610,7 +610,7 @@ CONFIG_I2C_GPIO=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/at91sam9260ek_defconfig
View File

@@ -582,7 +582,7 @@ CONFIG_I2C_GPIO=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

4
arch/arm/configs/at91sam9261ek_defconfig
View File

@@ -660,7 +660,7 @@ CONFIG_I2C_GPIO=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -687,7 +687,7 @@ CONFIG_SPI_ATMEL=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

4
arch/arm/configs/at91sam9263ek_defconfig
View File

@@ -670,7 +670,7 @@ CONFIG_I2C_GPIO=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -697,7 +697,7 @@ CONFIG_SPI_ATMEL=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

2
arch/arm/configs/at91sam9g20ek_defconfig
View File

@@ -665,7 +665,7 @@ CONFIG_SPI_ATMEL=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

4
arch/arm/configs/at91sam9rlek_defconfig
View File

@@ -566,7 +566,7 @@ CONFIG_I2C_GPIO=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -593,7 +593,7 @@ CONFIG_SPI_ATMEL=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

2
arch/arm/configs/ateb9200_defconfig
View File

@@ -723,7 +723,7 @@ CONFIG_I2C_GPIO=m
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/badge4_defconfig
View File

@@ -750,7 +750,7 @@ CONFIG_I2C_ELEKTOR=m
# Other I2C Chip support # Other I2C Chip support
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_RTC8564 is not set

4
arch/arm/configs/cam60_defconfig
View File

@@ -722,7 +722,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -749,7 +749,7 @@ CONFIG_SPI_ATMEL=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

4
arch/arm/configs/cm_x300_defconfig
View File

@@ -763,8 +763,8 @@ CONFIG_I2C_PXA=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/colibri_defconfig
View File

@@ -801,7 +801,7 @@ CONFIG_I2C_CHARDEV=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

6
arch/arm/configs/corgi_defconfig
View File

@@ -982,8 +982,8 @@ CONFIG_I2C_PXA=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
@@ -1008,7 +1008,7 @@ CONFIG_SPI_PXA2XX=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y

2
arch/arm/configs/csb337_defconfig
View File

@@ -679,7 +679,7 @@ CONFIG_I2C_GPIO=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/csb637_defconfig
View File

@@ -704,7 +704,7 @@ CONFIG_I2C_CHARDEV=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

4
arch/arm/configs/ecbat91_defconfig
View File

@@ -721,7 +721,7 @@ CONFIG_I2C_GPIO=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -747,7 +747,7 @@ CONFIG_SPI_AT91=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# #

2
arch/arm/configs/ep93xx_defconfig
View File

@@ -681,7 +681,7 @@ CONFIG_I2C_ALGOBIT=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

4
arch/arm/configs/ezx_defconfig
View File

@@ -877,7 +877,7 @@ CONFIG_I2C_PXA=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -900,7 +900,7 @@ CONFIG_SPI_PXA2XX=m
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y CONFIG_HAVE_GPIO_LIB=y

2
arch/arm/configs/footbridge_defconfig
View File

@@ -801,7 +801,7 @@ CONFIG_I2C=m
# #
# Other I2C Chip support # Other I2C Chip support
# #
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_RTC8564 is not set

2
arch/arm/configs/iop13xx_defconfig
View File

@@ -744,7 +744,7 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/iop32x_defconfig
View File

@@ -847,7 +847,7 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/iop33x_defconfig
View File

@@ -746,7 +746,7 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/ixp2000_defconfig
View File

@@ -768,7 +768,7 @@ CONFIG_I2C_IXP2000=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/ixp23xx_defconfig
View File

@@ -900,7 +900,7 @@ CONFIG_I2C_ALGOBIT=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/ixp4xx_defconfig
View File

@@ -1083,7 +1083,7 @@ CONFIG_I2C_IXP4XX=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/kafa_defconfig
View File

@@ -603,7 +603,7 @@ CONFIG_I2C_GPIO=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

6
arch/arm/configs/kirkwood_defconfig
View File

@@ -905,8 +905,8 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
@@ -930,7 +930,7 @@ CONFIG_SPI_ORION=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

4
arch/arm/configs/loki_defconfig
View File

@@ -654,7 +654,7 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -675,7 +675,7 @@ CONFIG_SPI_MASTER=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

2
arch/arm/configs/magician_defconfig
View File

@@ -678,7 +678,7 @@ CONFIG_I2C_PXA=m
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/msm_defconfig
View File

@@ -580,7 +580,7 @@ CONFIG_I2C_MSM=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCA9633=y CONFIG_SENSORS_PCA9633=y

2
arch/arm/configs/mv78xx0_defconfig
View File

@@ -832,7 +832,7 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

4
arch/arm/configs/n770_defconfig
View File

@@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -798,7 +798,7 @@ CONFIG_SPI_OMAP_UWIRE=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2101 is not set
# CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set # CONFIG_SPI_TSC210X is not set

6
arch/arm/configs/neocore926_defconfig
View File

@@ -774,8 +774,8 @@ CONFIG_I2C_CHARDEV=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
@@ -798,7 +798,7 @@ CONFIG_SPI_ATMEL=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set

2
arch/arm/configs/neponset_defconfig
View File

@@ -737,7 +737,7 @@ CONFIG_I2C_ALGOBIT=y
# #
# Other I2C Chip support # Other I2C Chip support
# #
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_RTC8564 is not set

4
arch/arm/configs/omap3_beagle_defconfig
View File

@@ -687,8 +687,8 @@ CONFIG_I2C_OMAP=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set

6
arch/arm/configs/omap3_pandora_defconfig
View File

@@ -713,8 +713,8 @@ CONFIG_I2C_OMAP=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
@@ -740,7 +740,7 @@ CONFIG_SPI_OMAP24XX=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y

4
arch/arm/configs/omap_2430sdp_defconfig
View File

@@ -710,7 +710,7 @@ CONFIG_I2C_OMAP=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -743,7 +743,7 @@ CONFIG_SPI_MASTER=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2101 is not set
# CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set # CONFIG_SPI_TSC210X is not set

2
arch/arm/configs/omap_apollon_2420_defconfig
View File

@@ -612,7 +612,7 @@ CONFIG_SPI_OMAP24XX=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2101 is not set
# CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set # CONFIG_SPI_TSC210X is not set

2
arch/arm/configs/omap_generic_1510_defconfig
View File

@@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/omap_generic_1610_defconfig
View File

@@ -641,7 +641,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

4
arch/arm/configs/omap_h2_1610_defconfig
View File

@@ -700,7 +700,7 @@ CONFIG_I2C_OMAP=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -731,7 +731,7 @@ CONFIG_SPI_OMAP_UWIRE=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_TSC2101=y CONFIG_SPI_TSC2101=y
# CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set # CONFIG_SPI_TSC210X is not set

2
arch/arm/configs/omap_h4_2420_defconfig
View File

@@ -681,7 +681,7 @@ CONFIG_I2C_OMAP=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/omap_innovator_1510_defconfig
View File

@@ -631,7 +631,7 @@ CONFIG_I2C_BOARDINFO=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

6
arch/arm/configs/omap_ldp_defconfig
View File

@@ -629,8 +629,8 @@ CONFIG_I2C_OMAP=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
@@ -656,7 +656,7 @@ CONFIG_SPI_OMAP24XX=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y

2
arch/arm/configs/omap_osk_5912_defconfig
View File

@@ -711,7 +711,7 @@ CONFIG_I2C_OMAP=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

2
arch/arm/configs/onearm_defconfig
View File

@@ -698,7 +698,7 @@ CONFIG_I2C_CHARDEV=y
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

4
arch/arm/configs/orion5x_defconfig
View File

@@ -886,8 +886,8 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set

6
arch/arm/configs/overo_defconfig
View File

@@ -858,8 +858,8 @@ CONFIG_I2C_OMAP=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
CONFIG_SENSORS_EEPROM=y CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
@@ -885,7 +885,7 @@ CONFIG_SPI_OMAP24XX=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y

2
arch/arm/configs/palmz71_defconfig
View File

@@ -554,7 +554,7 @@ CONFIG_SPI_OMAP_UWIRE=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2101 is not set
# CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC2102 is not set
# CONFIG_SPI_TSC210X is not set # CONFIG_SPI_TSC210X is not set

6
arch/arm/configs/palmz72_defconfig
View File

@@ -527,8 +527,8 @@ CONFIG_I2C_PXA=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_AT24 is not set # CONFIG_EEPROM_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
@@ -552,7 +552,7 @@ CONFIG_SPI_MASTER=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y

2
arch/arm/configs/pcm027_defconfig
View File

@@ -606,7 +606,7 @@ CONFIG_I2C_PXA=y
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set

4
arch/arm/configs/pcm038_defconfig
View File

@@ -604,7 +604,7 @@ CONFIG_I2C_BOARDINFO=y
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set # CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
@@ -626,7 +626,7 @@ CONFIG_SPI_BITBANG=y
# #
# SPI Protocol Masters # SPI Protocol Masters
# #
# CONFIG_SPI_AT25 is not set # CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y CONFIG_HAVE_GPIO_LIB=y

2
arch/arm/configs/picotux200_defconfig
View File

@@ -744,7 +744,7 @@ CONFIG_I2C_GPIO=m
# #
CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_PCF8591=m

2
arch/arm/configs/pnx4008_defconfig
View File

@@ -915,7 +915,7 @@ CONFIG_I2C_ALGOPCA=m
# #
# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCF8574=m
# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m CONFIG_SENSORS_PCF8591=m

Some files were not shown because too many files have changed in this diff Show More