Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking changes from David Miller:
 "The most important bit in here is the fix for input route caching from
  Eric Dumazet, it's a shame we couldn't fully analyze this in time for
  3.6 as it's a 3.6 regression introduced by the routing cache removal.

  Anyways, will send quickly to -stable after you pull this in.

  Other changes of note:

   1) Fix lockdep splats in team and bonding, from Eric Dumazet.

   2) IPV6 adds link local route even when there is no link local
      address, from Nicolas Dichtel.

   3) Fix ixgbe PTP implementation, from Jacob Keller.

   4) Fix excessive stack usage in cxgb4 driver, from Vipul Pandya.

   5) MAC length computed improperly in VLAN demux, from Antonio
      Quartulli."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt
  Remove noisy printks from llcp_sock_connect
  tipc: prevent dropped connections due to rcvbuf overflow
  silence some noisy printks in irda
  team: set qdisc_tx_busylock to avoid LOCKDEP splat
  bonding: set qdisc_tx_busylock to avoid LOCKDEP splat
  sctp: check src addr when processing SACK to update transport state
  sctp: fix a typo in prototype of __sctp_rcv_lookup()
  ipv4: add a fib_type to fib_info
  can: mpc5xxx_can: fix section type conflict
  can: peak_pcmcia: fix error return code
  can: peak_pci: fix error return code
  cxgb4: Fix build error due to missing linux/vmalloc.h include.
  bnx2x: fix ring size for 10G functions
  cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params()
  ixgbe: add support for X540-AT1
  ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bit
  ixgbe: fix PTP ethtool timestamping function
  ixgbe: (PTP) Fix PPS interrupt code
  ixgbe: Fix PTP X540 SDP alignment code for PPS signal
  ...

drivers/net/can/mscan/mpc5xxx_can.c

@@ -247,7 +247,7 @@ static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
 }
 #endif /* CONFIG_PPC_MPC512x */
 
-static struct of_device_id mpc5xxx_can_table[];
+static const struct of_device_id mpc5xxx_can_table[];
 static int __devinit mpc5xxx_can_probe(struct platform_device *ofdev)
 {
 	const struct of_device_id *match;
@@ -380,17 +380,17 @@ static int mpc5xxx_can_resume(struct platform_device *ofdev)
 }
 #endif
 
-static const struct mpc5xxx_can_data __devinitdata mpc5200_can_data = {
+static const struct mpc5xxx_can_data __devinitconst mpc5200_can_data = {
 	.type = MSCAN_TYPE_MPC5200,
 	.get_clock = mpc52xx_can_get_clock,
 };
 
-static const struct mpc5xxx_can_data __devinitdata mpc5121_can_data = {
+static const struct mpc5xxx_can_data __devinitconst mpc5121_can_data = {
 	.type = MSCAN_TYPE_MPC5121,
 	.get_clock = mpc512x_can_get_clock,
 };
 
-static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
+static const struct of_device_id __devinitconst mpc5xxx_can_table[] = {
 	{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data, },
 	/* Note that only MPC5121 Rev. 2 (and later) is supported */
 	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, },

drivers/net/can/sja1000/peak_pci.c

@@ -583,12 +583,14 @@ static int __devinit peak_pci_probe(struct pci_dev *pdev,
 	cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
 	if (!cfg_base) {
 		dev_err(&pdev->dev, "failed to map PCI resource #0\n");
+		err = -ENOMEM;
 		goto failure_release_regions;
 	}
 
 	reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
 	if (!reg_base) {
 		dev_err(&pdev->dev, "failed to map PCI resource #1\n");
+		err = -ENOMEM;
 		goto failure_unmap_cfg_base;
 	}
 

drivers/net/can/sja1000/peak_pcmcia.c

@@ -686,8 +686,10 @@ static int __devinit pcan_probe(struct pcmcia_device *pdev)
 
 	/* detect available channels */
 	pcan_add_channels(card);
-	if (!card->chan_count)
+	if (!card->chan_count) {
+		err = -ENOMEM;
 		goto probe_err_4;
+	}
 
 	/* init the timer which controls the leds */
 	init_timer(&card->led_timer);