Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:

 - ARM: GICv3 ITS emulation and various fixes.  Removal of the
   old VGIC implementation.

 - s390: support for trapping software breakpoints, nested
   virtualization (vSIE), the STHYI opcode, initial extensions
   for CPU model support.

 - MIPS: support for MIPS64 hosts (32-bit guests only) and lots
   of cleanups, preliminary to this and the upcoming support for
   hardware virtualization extensions.

 - x86: support for execute-only mappings in nested EPT; reduced
   vmexit latency for TSC deadline timer (by about 30%) on Intel
   hosts; support for more than 255 vCPUs.

 - PPC: bugfixes.

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (302 commits)
  KVM: PPC: Introduce KVM_CAP_PPC_HTM
  MIPS: Select HAVE_KVM for MIPS64_R{2,6}
  MIPS: KVM: Reset CP0_PageMask during host TLB flush
  MIPS: KVM: Fix ptr->int cast via KVM_GUEST_KSEGX()
  MIPS: KVM: Sign extend MFC0/RDHWR results
  MIPS: KVM: Fix 64-bit big endian dynamic translation
  MIPS: KVM: Fail if ebase doesn't fit in CP0_EBase
  MIPS: KVM: Use 64-bit CP0_EBase when appropriate
  MIPS: KVM: Set CP0_Status.KX on MIPS64
  MIPS: KVM: Make entry code MIPS64 friendly
  MIPS: KVM: Use kmap instead of CKSEG0ADDR()
  MIPS: KVM: Use virt_to_phys() to get commpage PFN
  MIPS: Fix definition of KSEGX() for 64-bit
  KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD
  kvm: x86: nVMX: maintain internal copy of current VMCS
  KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
  KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
  KVM: arm64: vgic-its: Simplify MAPI error handling
  KVM: arm64: vgic-its: Make vgic_its_cmd_handle_mapi similar to other handlers
  KVM: arm64: vgic-its: Turn device_id validation into generic ID validation
  ...

arch/arm/include/asm/kvm_asm.h

@@ -66,6 +66,8 @@ extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
 extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
 
 extern void __init_stage2_translation(void);
+
+extern void __kvm_hyp_reset(unsigned long);
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */

arch/arm/include/asm/kvm_host.h

@@ -241,8 +241,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
 int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 		int exception_index);
 
-static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
-				       phys_addr_t pgd_ptr,
+static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
 				       unsigned long hyp_stack_ptr,
 				       unsigned long vector_ptr)
 {
@@ -251,18 +250,13 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
 	 * code. The init code doesn't need to preserve these
 	 * registers as r0-r3 are already callee saved according to
 	 * the AAPCS.
-	 * Note that we slightly misuse the prototype by casing the
+	 * Note that we slightly misuse the prototype by casting the
 	 * stack pointer to a void *.
-	 *
-	 * We don't have enough registers to perform the full init in
-	 * one go.  Install the boot PGD first, and then install the
-	 * runtime PGD, stack pointer and vectors. The PGDs are always
-	 * passed as the third argument, in order to be passed into
-	 * r2-r3 to the init code (yes, this is compliant with the
-	 * PCS!).
-	 */
 
-	kvm_call_hyp(NULL, 0, boot_pgd_ptr);
+	 * The PGDs are always passed as the third argument, in order
+	 * to be passed into r2-r3 to the init code (yes, this is
+	 * compliant with the PCS!).
+	 */
 
 	kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
 }
@@ -272,16 +266,13 @@ static inline void __cpu_init_stage2(void)
 	kvm_call_hyp(__init_stage2_translation);
 }
 
-static inline void __cpu_reset_hyp_mode(phys_addr_t boot_pgd_ptr,
+static inline void __cpu_reset_hyp_mode(unsigned long vector_ptr,
 					phys_addr_t phys_idmap_start)
 {
-	/*
-	 * TODO
-	 * kvm_call_reset(boot_pgd_ptr, phys_idmap_start);
-	 */
+	kvm_call_hyp((void *)virt_to_idmap(__kvm_hyp_reset), vector_ptr);
 }
 
-static inline int kvm_arch_dev_ioctl_check_extension(long ext)
+static inline int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext)
 {
 	return 0;
 }

arch/arm/include/asm/kvm_hyp.h

@@ -25,9 +25,6 @@
 
 #define __hyp_text __section(.hyp.text) notrace
 
-#define kern_hyp_va(v) (v)
-#define hyp_kern_va(v) (v)
-
 #define __ACCESS_CP15(CRn, Op1, CRm, Op2)	\
 	"mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32
 #define __ACCESS_CP15_64(Op1, CRm)		\

arch/arm/include/asm/kvm_mmu.h

@@ -26,16 +26,7 @@
  * We directly use the kernel VA for the HYP, as we can directly share
  * the mapping (HTTBR "covers" TTBR1).
  */
-#define HYP_PAGE_OFFSET_MASK	UL(~0)
-#define HYP_PAGE_OFFSET		PAGE_OFFSET
-#define KERN_TO_HYP(kva)	(kva)
-
-/*
- * Our virtual mapping for the boot-time MMU-enable code. Must be
- * shared across all the page-tables. Conveniently, we use the vectors
- * page, where no kernel data will ever be shared with HYP.
- */
-#define TRAMPOLINE_VA		UL(CONFIG_VECTORS_BASE)
+#define kern_hyp_va(kva)	(kva)
 
 /*
  * KVM_MMU_CACHE_MIN_PAGES is the number of stage2 page table translation levels.
@@ -49,9 +40,8 @@
 #include <asm/pgalloc.h>
 #include <asm/stage2_pgtable.h>
 
-int create_hyp_mappings(void *from, void *to);
+int create_hyp_mappings(void *from, void *to, pgprot_t prot);
 int create_hyp_io_mappings(void *from, void *to, phys_addr_t);
-void free_boot_hyp_pgd(void);
 void free_hyp_pgds(void);
 
 void stage2_unmap_vm(struct kvm *kvm);
@@ -65,7 +55,6 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run);
 void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
 
 phys_addr_t kvm_mmu_get_httbr(void);
-phys_addr_t kvm_mmu_get_boot_httbr(void);
 phys_addr_t kvm_get_idmap_vector(void);
 phys_addr_t kvm_get_idmap_start(void);
 int kvm_mmu_init(void);

arch/arm/include/asm/pgtable.h

@@ -97,7 +97,9 @@ extern pgprot_t		pgprot_s2_device;
 #define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
 #define PAGE_KERNEL		_MOD_PROT(pgprot_kernel, L_PTE_XN)
 #define PAGE_KERNEL_EXEC	pgprot_kernel
-#define PAGE_HYP		_MOD_PROT(pgprot_kernel, L_PTE_HYP)
+#define PAGE_HYP		_MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_XN)
+#define PAGE_HYP_EXEC		_MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY)
+#define PAGE_HYP_RO		_MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY | L_PTE_XN)
 #define PAGE_HYP_DEVICE		_MOD_PROT(pgprot_hyp_device, L_PTE_HYP)
 #define PAGE_S2			_MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY)
 #define PAGE_S2_DEVICE		_MOD_PROT(pgprot_s2_device, L_PTE_S2_RDONLY)

arch/arm/include/asm/virt.h

@@ -80,6 +80,10 @@ static inline bool is_kernel_in_hyp_mode(void)
 	return false;
 }
 
+/* The section containing the hypervisor idmap text */
+extern char __hyp_idmap_text_start[];
+extern char __hyp_idmap_text_end[];
+
 /* The section containing the hypervisor text */
 extern char __hyp_text_start[];
 extern char __hyp_text_end[];