ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names

The i.MX7 has two iomux controllers. the iomuxc and the iomuxc_lpsr.
In a board dts we have to make sure that both controllers are supplied
with the correct pins. It's way too easy to do this wrong since only
a look into the reference manual can reveal which pins belong to which
controller. To make this clearer add "LPSR" to the pin names which
belong to the LPSR controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx7d-nitrogen7.dts

@@ -712,33 +712,33 @@
 
 	pinctrl_hog_2: hoggrp-2 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO02__GPIO1_IO2		0x7d
-			MX7D_PAD_GPIO1_IO03__CCM_CLKO2		0x7d
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x7d
+			MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2	0x7d
 		>;
 	};
 
 	pinctrl_backlight_j9: backlightj9grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO07__GPIO1_IO7		0x7d
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x7d
 		>;
 	};
 
 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO01__PWM1_OUT		0x7d
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x7d
 		>;
 	};
 
 	pinctrl_usbotg1: usbotg1grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO04__USB_OTG1_OC	0x7d
-			MX7D_PAD_GPIO1_IO05__GPIO1_IO5		0x14
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x7d
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x14
 		>;
 	};
 
 	pinctrl_wdog1: wdog1grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B	0x75
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B	0x75
 		>;
 	};
 };