Merge tag 'dt2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates part 2 from Arnd Bergmann:
 "This is a follow-up to the early ARM SoC DT changes, with additional
  content that has external dependencies:

   - The Tegra IOMMU DT support depends on changes from the iommu tree,
     plus the contents of the arm-soc drivers branch
   - The MVEBU PHY support depends on changes from the phy tree
   - The AT91 DT support depends on changes from the RTC and DMA-slave
     trees

  All of these changes just enable additional devices for existing
  platforms"

* tag 'dt2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: Enable IOMMU for display controllers on Tegra124
  ARM: tegra: Enable IOMMU for display controllers on Tegra114
  ARM: tegra: Enable IOMMU for display controllers on Tegra30
  ARM: tegra: Add memory controller support for Tegra124
  ARM: tegra: Add memory controller support for Tegra114
  ARM: tegra: Add memory controller support for Tegra30
  ARM: tegra: Add APB_MISC_GP as a MIPI pad control bank
  ARM: mvebu: add PHY support to the dts for the USB controllers on Armada 375
  ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375
  ARM: at91/dt: at91sam9g45: add ISI node
  ARM: at91/dt: enable the RTT block on the at91sam9m10g45ek board
  ARM: at91/dt: enable the RTT block on the sam9g20ek board
  ARM: at91/dt: add GPBR nodes
  ARM: at91/dt: add RTT nodes to at91 dtsis
  ARM: at91/dt: at91sam9rl: add rtc
  ARM: at91: fix GPLv2 wording
  ARM: at91/dt: sama5d4: add DMA support
  ARM: at91/dt: sama5d4: use macro instead of numeric value

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -492,6 +492,27 @@
 					};
 				};
 
+				isi {
+					pinctrl_isi: isi-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							      AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */
+							      AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							      AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */
+							      AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							      AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							      AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							      AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							      AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							      AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							      AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							      AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							      AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							      AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							      AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */
+							      AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>;
+					};
+				};
+
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
@@ -1035,6 +1056,17 @@
 				};
 			};
 
+			isi@fffb4000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi>;
+				status = "disabled";
+			};
+
 			pwm0: pwm@fffb8000 {
 				compatible = "atmel,at91sam9rl-pwm";
 				reg = <0xfffb8000 0x300>;
@@ -1199,12 +1231,26 @@
 				};
 			};
 
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
 			rtc@fffffdb0 {
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffdb0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				status = "disabled";
 			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
 		};
 
 		fb0: fb@0x00500000 {