Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
This commit is contained in:
Linus Torvalds
750
arch/m32r/m32700ut/defconfig.m32700ut.smp
Normal file
750
arch/m32r/m32700ut/defconfig.m32700ut.smp
Normal file
@@ -0,0 +1,750 @@
|
||||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.11-rc4
|
||||
# Wed Feb 16 21:10:50 2005
|
||||
#
|
||||
CONFIG_M32R=y
|
||||
# CONFIG_UID16 is not set
|
||||
CONFIG_GENERIC_ISA_DMA=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_LOCK_KERNEL=y
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_SWAP=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_LOG_BUF_SHIFT=15
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
CONFIG_IKCONFIG=y
|
||||
# CONFIG_IKCONFIG_PROC is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
# CONFIG_FUTEX is not set
|
||||
# CONFIG_EPOLL is not set
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
CONFIG_STOP_MACHINE=y
|
||||
|
||||
#
|
||||
# Processor type and features
|
||||
#
|
||||
# CONFIG_PLAT_MAPPI is not set
|
||||
# CONFIG_PLAT_USRV is not set
|
||||
CONFIG_PLAT_M32700UT=y
|
||||
# CONFIG_PLAT_OPSPUT is not set
|
||||
# CONFIG_PLAT_OAKS32R is not set
|
||||
# CONFIG_PLAT_MAPPI2 is not set
|
||||
CONFIG_CHIP_M32700=y
|
||||
# CONFIG_CHIP_M32102 is not set
|
||||
# CONFIG_CHIP_VDEC2 is not set
|
||||
# CONFIG_CHIP_OPSP is not set
|
||||
CONFIG_MMU=y
|
||||
CONFIG_TLB_ENTRIES=32
|
||||
CONFIG_ISA_M32R2=y
|
||||
CONFIG_ISA_DSP_LEVEL2=y
|
||||
CONFIG_ISA_DUAL_ISSUE=y
|
||||
CONFIG_BUS_CLOCK=50000000
|
||||
CONFIG_TIMER_DIVIDE=128
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
CONFIG_MEMORY_START=0x08000000
|
||||
CONFIG_MEMORY_SIZE=0x01000000
|
||||
CONFIG_NOHIGHMEM=y
|
||||
# CONFIG_DISCONTIGMEM is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_PREEMPT=y
|
||||
# CONFIG_HAVE_DEC_LOCK is not set
|
||||
CONFIG_SMP=y
|
||||
CONFIG_CHIP_M32700_TS1=y
|
||||
CONFIG_NR_CPUS=2
|
||||
# CONFIG_NUMA is not set
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
# CONFIG_ISA is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
CONFIG_PCCARD=y
|
||||
# CONFIG_PCMCIA_DEBUG is not set
|
||||
CONFIG_PCMCIA=y
|
||||
|
||||
#
|
||||
# PC-card bridges
|
||||
#
|
||||
# CONFIG_TCIC is not set
|
||||
# CONFIG_M32R_PCC is not set
|
||||
CONFIG_M32R_CFC=y
|
||||
CONFIG_M32R_CFC_NUM=1
|
||||
|
||||
#
|
||||
# PCI Hotplug Support
|
||||
#
|
||||
|
||||
#
|
||||
# Executable file formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
CONFIG_IDE=y
|
||||
CONFIG_BLK_DEV_IDE=y
|
||||
|
||||
#
|
||||
# Please see Documentation/ide.txt for help/info on IDE drives
|
||||
#
|
||||
# CONFIG_BLK_DEV_IDE_SATA is not set
|
||||
CONFIG_BLK_DEV_IDEDISK=y
|
||||
# CONFIG_IDEDISK_MULTI_MODE is not set
|
||||
CONFIG_BLK_DEV_IDECS=y
|
||||
CONFIG_BLK_DEV_IDECD=m
|
||||
# CONFIG_BLK_DEV_IDETAPE is not set
|
||||
# CONFIG_BLK_DEV_IDEFLOPPY is not set
|
||||
# CONFIG_BLK_DEV_IDESCSI is not set
|
||||
# CONFIG_IDE_TASK_IOCTL is not set
|
||||
|
||||
#
|
||||
# IDE chipset support/bugfixes
|
||||
#
|
||||
CONFIG_IDE_GENERIC=y
|
||||
# CONFIG_IDE_ARM is not set
|
||||
# CONFIG_BLK_DEV_IDEDMA is not set
|
||||
# CONFIG_IDEDMA_AUTO is not set
|
||||
# CONFIG_BLK_DEV_HD is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_SCSI_PROC_FS=y
|
||||
|
||||
#
|
||||
# SCSI support type (disk, tape, CD-ROM)
|
||||
#
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
# CONFIG_CHR_DEV_ST is not set
|
||||
# CONFIG_CHR_DEV_OSST is not set
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
# CONFIG_BLK_DEV_SR_VENDOR is not set
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
|
||||
#
|
||||
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
||||
#
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_CONSTANTS is not set
|
||||
# CONFIG_SCSI_LOGGING is not set
|
||||
|
||||
#
|
||||
# SCSI Transport Attributes
|
||||
#
|
||||
# CONFIG_SCSI_SPI_ATTRS is not set
|
||||
# CONFIG_SCSI_FC_ATTRS is not set
|
||||
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
||||
|
||||
#
|
||||
# SCSI low-level drivers
|
||||
#
|
||||
# CONFIG_SCSI_SATA is not set
|
||||
# CONFIG_SCSI_DEBUG is not set
|
||||
|
||||
#
|
||||
# PCMCIA SCSI adapter support
|
||||
#
|
||||
# CONFIG_PCMCIA_AHA152X is not set
|
||||
# CONFIG_PCMCIA_FDOMAIN is not set
|
||||
# CONFIG_PCMCIA_NINJA_SCSI is not set
|
||||
# CONFIG_PCMCIA_QLOGIC is not set
|
||||
# CONFIG_PCMCIA_SYM53C500 is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Networking support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
# CONFIG_NETLINK_DEV is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_IP_TCPDIAG=y
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_SMC91X=y
|
||||
# CONFIG_NE2000 is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# PCMCIA network device support
|
||||
#
|
||||
# CONFIG_NET_PCMCIA is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input I/O drivers
|
||||
#
|
||||
# CONFIG_GAMEPORT is not set
|
||||
CONFIG_SOUND_GAMEPORT=y
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
# CONFIG_SERIO_CT82C710 is not set
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_SERIAL_M32R_SIO=y
|
||||
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
|
||||
CONFIG_SERIAL_M32R_PLDSIO=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_DS1302=y
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
|
||||
#
|
||||
# PCMCIA character devices
|
||||
#
|
||||
# CONFIG_SYNCLINK_CS is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
CONFIG_VIDEO_DEV=y
|
||||
|
||||
#
|
||||
# Video For Linux
|
||||
#
|
||||
|
||||
#
|
||||
# Video Adapters
|
||||
#
|
||||
# CONFIG_VIDEO_CPIA is not set
|
||||
CONFIG_VIDEO_M32R_AR=y
|
||||
CONFIG_VIDEO_M32R_AR_M64278=y
|
||||
|
||||
#
|
||||
# Radio Adapters
|
||||
#
|
||||
# CONFIG_RADIO_MAESTRO is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
CONFIG_FB=y
|
||||
# CONFIG_FB_MODE_HELPERS is not set
|
||||
# CONFIG_FB_TILEBLITTING is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
# CONFIG_FONTS is not set
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_FONT_8x16=y
|
||||
|
||||
#
|
||||
# Logo configuration
|
||||
#
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_LOGO_LINUX_MONO=y
|
||||
CONFIG_LOGO_LINUX_VGA16=y
|
||||
CONFIG_LOGO_LINUX_CLUT224=y
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
# CONFIG_INFINIBAND is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
CONFIG_EXT3_FS=m
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
CONFIG_JBD=m
|
||||
CONFIG_JBD_DEBUG=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_REISERFS_FS=m
|
||||
# CONFIG_REISERFS_CHECK is not set
|
||||
# CONFIG_REISERFS_PROC_INFO is not set
|
||||
# CONFIG_REISERFS_FS_XATTR is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
CONFIG_ISO9660_FS=m
|
||||
CONFIG_JOLIET=y
|
||||
# CONFIG_ZISOFS is not set
|
||||
CONFIG_UDF_FS=m
|
||||
CONFIG_UDF_NLS=y
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
CONFIG_FAT_FS=m
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_FAT_DEFAULT_CODEPAGE=437
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_DEVFS_FS=y
|
||||
CONFIG_DEVFS_MOUNT=y
|
||||
# CONFIG_DEVFS_DEBUG is not set
|
||||
# CONFIG_DEVPTS_FS_XATTR is not set
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_TMPFS_XATTR is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
# CONFIG_NLS_CODEPAGE_437 is not set
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
# CONFIG_NLS_CODEPAGE_850 is not set
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
# CONFIG_NLS_ASCII is not set
|
||||
# CONFIG_NLS_ISO8859_1 is not set
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
# CONFIG_NLS_ISO8859_15 is not set
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_DEBUG_PREEMPT=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_FRAME_POINTER is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
747
arch/m32r/m32700ut/defconfig.m32700ut.up
Normal file
747
arch/m32r/m32700ut/defconfig.m32700ut.up
Normal file
@@ -0,0 +1,747 @@
|
||||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.11-rc4
|
||||
# Wed Feb 16 21:10:54 2005
|
||||
#
|
||||
CONFIG_M32R=y
|
||||
# CONFIG_UID16 is not set
|
||||
CONFIG_GENERIC_ISA_DMA=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_CLEAN_COMPILE=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_LOCK_KERNEL=y
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_SWAP=y
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_KOBJECT_UEVENT=y
|
||||
CONFIG_IKCONFIG=y
|
||||
# CONFIG_IKCONFIG_PROC is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
# CONFIG_FUTEX is not set
|
||||
# CONFIG_EPOLL is not set
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
|
||||
#
|
||||
# Processor type and features
|
||||
#
|
||||
# CONFIG_PLAT_MAPPI is not set
|
||||
# CONFIG_PLAT_USRV is not set
|
||||
CONFIG_PLAT_M32700UT=y
|
||||
# CONFIG_PLAT_OPSPUT is not set
|
||||
# CONFIG_PLAT_OAKS32R is not set
|
||||
# CONFIG_PLAT_MAPPI2 is not set
|
||||
CONFIG_CHIP_M32700=y
|
||||
# CONFIG_CHIP_M32102 is not set
|
||||
# CONFIG_CHIP_VDEC2 is not set
|
||||
# CONFIG_CHIP_OPSP is not set
|
||||
CONFIG_MMU=y
|
||||
CONFIG_TLB_ENTRIES=32
|
||||
CONFIG_ISA_M32R2=y
|
||||
CONFIG_ISA_DSP_LEVEL2=y
|
||||
CONFIG_ISA_DUAL_ISSUE=y
|
||||
CONFIG_BUS_CLOCK=50000000
|
||||
CONFIG_TIMER_DIVIDE=128
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
CONFIG_MEMORY_START=0x08000000
|
||||
CONFIG_MEMORY_SIZE=0x01000000
|
||||
CONFIG_NOHIGHMEM=y
|
||||
# CONFIG_DISCONTIGMEM is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_PREEMPT=y
|
||||
# CONFIG_HAVE_DEC_LOCK is not set
|
||||
# CONFIG_SMP is not set
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
|
||||
#
|
||||
# CONFIG_PCI is not set
|
||||
# CONFIG_ISA is not set
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
CONFIG_PCCARD=y
|
||||
# CONFIG_PCMCIA_DEBUG is not set
|
||||
CONFIG_PCMCIA=y
|
||||
|
||||
#
|
||||
# PC-card bridges
|
||||
#
|
||||
# CONFIG_TCIC is not set
|
||||
# CONFIG_M32R_PCC is not set
|
||||
CONFIG_M32R_CFC=y
|
||||
CONFIG_M32R_CFC_NUM=1
|
||||
|
||||
#
|
||||
# PCI Hotplug Support
|
||||
#
|
||||
|
||||
#
|
||||
# Executable file formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_DEV_FD is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
|
||||
CONFIG_BLK_DEV_NBD=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
# CONFIG_IOSCHED_AS is not set
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
CONFIG_IDE=y
|
||||
CONFIG_BLK_DEV_IDE=y
|
||||
|
||||
#
|
||||
# Please see Documentation/ide.txt for help/info on IDE drives
|
||||
#
|
||||
# CONFIG_BLK_DEV_IDE_SATA is not set
|
||||
CONFIG_BLK_DEV_IDEDISK=y
|
||||
# CONFIG_IDEDISK_MULTI_MODE is not set
|
||||
CONFIG_BLK_DEV_IDECS=y
|
||||
CONFIG_BLK_DEV_IDECD=m
|
||||
# CONFIG_BLK_DEV_IDETAPE is not set
|
||||
# CONFIG_BLK_DEV_IDEFLOPPY is not set
|
||||
# CONFIG_BLK_DEV_IDESCSI is not set
|
||||
# CONFIG_IDE_TASK_IOCTL is not set
|
||||
|
||||
#
|
||||
# IDE chipset support/bugfixes
|
||||
#
|
||||
CONFIG_IDE_GENERIC=y
|
||||
# CONFIG_IDE_ARM is not set
|
||||
# CONFIG_BLK_DEV_IDEDMA is not set
|
||||
# CONFIG_IDEDMA_AUTO is not set
|
||||
# CONFIG_BLK_DEV_HD is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
CONFIG_SCSI=m
|
||||
CONFIG_SCSI_PROC_FS=y
|
||||
|
||||
#
|
||||
# SCSI support type (disk, tape, CD-ROM)
|
||||
#
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
# CONFIG_CHR_DEV_ST is not set
|
||||
# CONFIG_CHR_DEV_OSST is not set
|
||||
CONFIG_BLK_DEV_SR=m
|
||||
# CONFIG_BLK_DEV_SR_VENDOR is not set
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
|
||||
#
|
||||
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
||||
#
|
||||
CONFIG_SCSI_MULTI_LUN=y
|
||||
# CONFIG_SCSI_CONSTANTS is not set
|
||||
# CONFIG_SCSI_LOGGING is not set
|
||||
|
||||
#
|
||||
# SCSI Transport Attributes
|
||||
#
|
||||
# CONFIG_SCSI_SPI_ATTRS is not set
|
||||
# CONFIG_SCSI_FC_ATTRS is not set
|
||||
# CONFIG_SCSI_ISCSI_ATTRS is not set
|
||||
|
||||
#
|
||||
# SCSI low-level drivers
|
||||
#
|
||||
# CONFIG_SCSI_SATA is not set
|
||||
# CONFIG_SCSI_DEBUG is not set
|
||||
|
||||
#
|
||||
# PCMCIA SCSI adapter support
|
||||
#
|
||||
# CONFIG_PCMCIA_AHA152X is not set
|
||||
# CONFIG_PCMCIA_FDOMAIN is not set
|
||||
# CONFIG_PCMCIA_NINJA_SCSI is not set
|
||||
# CONFIG_PCMCIA_QLOGIC is not set
|
||||
# CONFIG_PCMCIA_SYM53C500 is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
|
||||
#
|
||||
# Networking support
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
# CONFIG_NETLINK_DEV is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
# CONFIG_IP_MULTICAST is not set
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
# CONFIG_IP_PNP_BOOTP is not set
|
||||
# CONFIG_IP_PNP_RARP is not set
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
# CONFIG_ARPD is not set
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_IP_TCPDIAG=y
|
||||
# CONFIG_IP_TCPDIAG_IPV6 is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
# CONFIG_NET_CLS_ROUTE is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_SMC91X=y
|
||||
# CONFIG_NE2000 is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# PCMCIA network device support
|
||||
#
|
||||
# CONFIG_NET_PCMCIA is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input I/O drivers
|
||||
#
|
||||
# CONFIG_GAMEPORT is not set
|
||||
CONFIG_SOUND_GAMEPORT=y
|
||||
CONFIG_SERIO=y
|
||||
# CONFIG_SERIO_I8042 is not set
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
# CONFIG_SERIO_CT82C710 is not set
|
||||
# CONFIG_SERIO_LIBPS2 is not set
|
||||
# CONFIG_SERIO_RAW is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_SERIAL_M32R_SIO=y
|
||||
CONFIG_SERIAL_M32R_SIO_CONSOLE=y
|
||||
CONFIG_SERIAL_M32R_PLDSIO=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_GEN_RTC is not set
|
||||
CONFIG_DS1302=y
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
|
||||
#
|
||||
# PCMCIA character devices
|
||||
#
|
||||
# CONFIG_SYNCLINK_CS is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
CONFIG_VIDEO_DEV=y
|
||||
|
||||
#
|
||||
# Video For Linux
|
||||
#
|
||||
|
||||
#
|
||||
# Video Adapters
|
||||
#
|
||||
# CONFIG_VIDEO_CPIA is not set
|
||||
CONFIG_VIDEO_M32R_AR=y
|
||||
CONFIG_VIDEO_M32R_AR_M64278=y
|
||||
|
||||
#
|
||||
# Radio Adapters
|
||||
#
|
||||
# CONFIG_RADIO_MAESTRO is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
CONFIG_FB=y
|
||||
# CONFIG_FB_MODE_HELPERS is not set
|
||||
# CONFIG_FB_TILEBLITTING is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
# CONFIG_FONTS is not set
|
||||
CONFIG_FONT_8x8=y
|
||||
CONFIG_FONT_8x16=y
|
||||
|
||||
#
|
||||
# Logo configuration
|
||||
#
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_LOGO_LINUX_MONO=y
|
||||
CONFIG_LOGO_LINUX_VGA16=y
|
||||
CONFIG_LOGO_LINUX_CLUT224=y
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
# CONFIG_USB_ARCH_HAS_HCD is not set
|
||||
# CONFIG_USB_ARCH_HAS_OHCI is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
# CONFIG_INFINIBAND is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
CONFIG_EXT3_FS=m
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
CONFIG_JBD=m
|
||||
CONFIG_JBD_DEBUG=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_REISERFS_FS=m
|
||||
# CONFIG_REISERFS_CHECK is not set
|
||||
# CONFIG_REISERFS_PROC_INFO is not set
|
||||
# CONFIG_REISERFS_FS_XATTR is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
||||
#
|
||||
# XFS support
|
||||
#
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
CONFIG_ISO9660_FS=m
|
||||
CONFIG_JOLIET=y
|
||||
# CONFIG_ZISOFS is not set
|
||||
CONFIG_UDF_FS=m
|
||||
CONFIG_UDF_NLS=y
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
CONFIG_FAT_FS=m
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_FAT_DEFAULT_CODEPAGE=437
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_DEVFS_FS=y
|
||||
CONFIG_DEVFS_MOUNT=y
|
||||
# CONFIG_DEVFS_DEBUG is not set
|
||||
# CONFIG_DEVPTS_FS_XATTR is not set
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_TMPFS_XATTR is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
# CONFIG_NLS_CODEPAGE_437 is not set
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
# CONFIG_NLS_CODEPAGE_850 is not set
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
# CONFIG_NLS_ASCII is not set
|
||||
# CONFIG_NLS_ISO8859_1 is not set
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
# CONFIG_NLS_ISO8859_15 is not set
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_DEBUG_PREEMPT=y
|
||||
# CONFIG_DEBUG_BUGVERBOSE is not set
|
||||
# CONFIG_FRAME_POINTER is not set
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
# CONFIG_CRC_CCITT is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
249
arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB
Normal file
249
arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB
Normal file
@@ -0,0 +1,249 @@
|
||||
# .gdbinit file
|
||||
# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
|
||||
#-----
|
||||
# NOTE: this file is generated by a script, "gen_gdbinit.pl".
|
||||
# (Please type "gen_gdbinit.pl --help" and check the help message).
|
||||
# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
|
||||
#-----
|
||||
# target platform: m32700ut
|
||||
|
||||
# setting
|
||||
set width 0d70
|
||||
set radix 0d16
|
||||
|
||||
debug_chaos
|
||||
|
||||
# clk xin:cpu:bif:bus=25:200:50:50
|
||||
define clock_init
|
||||
set *(unsigned long *)0x00ef4008 = 0x00000000
|
||||
set *(unsigned long *)0x00ef4004 = 0
|
||||
shell sleep 0.1
|
||||
# NOTE: Please change the master clock source from PLL-clock to Xin-clock
|
||||
# and switch off PLL, before resetting the clock gear ratio.
|
||||
|
||||
set *(unsigned long *)0x00ef4024 = 2
|
||||
set *(unsigned long *)0x00ef4020 = 2
|
||||
set *(unsigned long *)0x00ef4010 = 0
|
||||
set *(unsigned long *)0x00ef4014 = 0
|
||||
set *(unsigned long *)0x00ef4004 = 3
|
||||
shell sleep 0.1
|
||||
set *(unsigned long *)0x00ef4008 = 0x00000200
|
||||
end
|
||||
|
||||
# Initialize SDRAM controller
|
||||
define sdram_init
|
||||
# SDIR0
|
||||
set *(unsigned long *)0x00ef6008 = 0x00000182
|
||||
# SDIR1
|
||||
set *(unsigned long *)0x00ef600c = 0x00000001
|
||||
# Initialize wait
|
||||
shell sleep 0.1
|
||||
# Ch0-MOD
|
||||
set *(unsigned long *)0x00ef602c = 0x00000020
|
||||
# Ch0-TR
|
||||
set *(unsigned long *)0x00ef6028 = 0x00041302
|
||||
# Ch0-ADR (size:16MB)
|
||||
set *(unsigned long *)0x00ef6020 = 0x08000002
|
||||
# AutoRef On
|
||||
set *(unsigned long *)0x00ef6004 = 0x00010517
|
||||
# Access enable
|
||||
set *(unsigned long *)0x00ef6024 = 0x00000001
|
||||
end
|
||||
document sdram_init
|
||||
SDRAM controller initialization
|
||||
0x08000000 - 0x08ffffff (16MB)
|
||||
end
|
||||
|
||||
# Initialize BSEL3 for UT-CFC
|
||||
define cfc_init
|
||||
set $sfrbase = 0xa0ef0000
|
||||
# too fast
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
|
||||
end
|
||||
document cfc_init
|
||||
CF controller initialization
|
||||
end
|
||||
|
||||
# MMU enable
|
||||
define mmu_enable
|
||||
set $evb=0x88000000
|
||||
set *(unsigned long *)0xffff0024=1
|
||||
end
|
||||
|
||||
# MMU disable
|
||||
define mmu_disable
|
||||
set $evb=0
|
||||
set *(unsigned long *)0xffff0024=0
|
||||
end
|
||||
|
||||
# Show TLB entries
|
||||
define show_tlb_entries
|
||||
set $i = 0
|
||||
set $addr = $arg0
|
||||
set $nr_entries = $arg1
|
||||
use_mon_code
|
||||
while ($i < $nr_entries)
|
||||
set $tlb_tag = *(unsigned long*)$addr
|
||||
set $tlb_data = *(unsigned long*)($addr + 4)
|
||||
printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
|
||||
set $i = $i + 1
|
||||
set $addr = $addr + 8
|
||||
end
|
||||
use_debug_dma
|
||||
end
|
||||
define itlb
|
||||
set $itlb=0xfe000000
|
||||
show_tlb_entries $itlb 0d32
|
||||
end
|
||||
define dtlb
|
||||
set $dtlb=0xfe000800
|
||||
show_tlb_entries $dtlb 0d32
|
||||
end
|
||||
|
||||
# Initialize TLB entries
|
||||
define init_tlb_entries
|
||||
set $i = 0
|
||||
set $addr = $arg0
|
||||
set $nr_entries = $arg1
|
||||
use_mon_code
|
||||
while ($i < $nr_entries)
|
||||
set *(unsigned long *)($addr + 0x4) = 0
|
||||
set $i = $i + 1
|
||||
set $addr = $addr + 8
|
||||
end
|
||||
use_debug_dma
|
||||
end
|
||||
define tlb_init
|
||||
set $itlb=0xfe000000
|
||||
init_tlb_entries $itlb 0d32
|
||||
set $dtlb=0xfe000800
|
||||
init_tlb_entries $dtlb 0d32
|
||||
end
|
||||
|
||||
# Show current task structure
|
||||
define show_current
|
||||
set $current = $spi & 0xffffe000
|
||||
printf "$current=0x%08lX\n",$current
|
||||
print *(struct task_struct *)$current
|
||||
end
|
||||
|
||||
# Show user assigned task structure
|
||||
define show_task
|
||||
set = $arg0 & 0xffffe000
|
||||
printf "$task=0x%08lX\n",$task
|
||||
print *(struct task_struct *)$task
|
||||
end
|
||||
document show_task
|
||||
Show user assigned task structure
|
||||
arg0 : task structure address
|
||||
end
|
||||
|
||||
# Show M32R registers
|
||||
define show_regs
|
||||
printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3
|
||||
printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7
|
||||
printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11
|
||||
printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp
|
||||
printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
|
||||
printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
|
||||
printf "EVB[0x%08lX]\n",$evb
|
||||
end
|
||||
|
||||
# Setup all
|
||||
define setup
|
||||
use_mon_code
|
||||
set *(unsigned int)0xfffffffc=0x60
|
||||
shell sleep 0.1
|
||||
clock_init
|
||||
shell sleep 0.1
|
||||
# SDRAM: 16MB
|
||||
set *(unsigned long *)0x00ef6020 = 0x08000002
|
||||
cfc_init
|
||||
# USB
|
||||
set *(unsigned short *)0xb0301000 = 0x100
|
||||
|
||||
set $evb=0x08000000
|
||||
end
|
||||
|
||||
# Load modules
|
||||
define load_modules
|
||||
use_debug_dma
|
||||
load
|
||||
end
|
||||
|
||||
# Set kernel parameters
|
||||
define set_kernel_parameters
|
||||
set $param = (void*)0x08001000
|
||||
# INITRD_START
|
||||
# set *(unsigned long *)($param + 0x0010) = 0x08300000
|
||||
# INITRD_SIZE
|
||||
# set *(unsigned long *)($param + 0x0014) = 0x00000000
|
||||
# M32R_CPUCLK
|
||||
set *(unsigned long *)($param + 0x0018) = 0d200000000
|
||||
# M32R_BUSCLK
|
||||
set *(unsigned long *)($param + 0x001c) = 0d50000000
|
||||
|
||||
# M32R_TIMER_DIVIDE
|
||||
set *(unsigned long *)($param + 0x0020) = 0d128
|
||||
|
||||
set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0"
|
||||
end
|
||||
|
||||
# Boot
|
||||
define boot
|
||||
set_kernel_parameters
|
||||
set $fp = 0
|
||||
set $pc = 0x08002000
|
||||
# set *(unsigned char *)0xffffffff = 0x03
|
||||
si
|
||||
c
|
||||
end
|
||||
|
||||
# Set breakpoints
|
||||
define set_breakpoints
|
||||
b *0x08000030
|
||||
end
|
||||
|
||||
# Restart
|
||||
define restart
|
||||
sdireset
|
||||
sdireset
|
||||
set $pc = 0
|
||||
b *0x04001000
|
||||
b *0x08001000
|
||||
b *0x08002000
|
||||
si
|
||||
c
|
||||
tlb_init
|
||||
del
|
||||
setup
|
||||
load_modules
|
||||
boot
|
||||
end
|
||||
|
||||
define si
|
||||
stepi
|
||||
x/i $pc
|
||||
show_reg
|
||||
end
|
||||
|
||||
sdireset
|
||||
sdireset
|
||||
file vmlinux
|
||||
target m32rsdi
|
||||
set $pc = 0
|
||||
b *0x04001000
|
||||
b *0x08001000
|
||||
b *0x08002000
|
||||
c
|
||||
tlb_init
|
||||
del
|
||||
setup
|
||||
load_modules
|
||||
boot
|
||||
|
||||
249
arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB
Normal file
249
arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB
Normal file
@@ -0,0 +1,249 @@
|
||||
# .gdbinit file
|
||||
# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
|
||||
#-----
|
||||
# NOTE: this file is generated by a script, "gen_gdbinit.pl".
|
||||
# (Please type "gen_gdbinit.pl --help" and check the help message).
|
||||
# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
|
||||
#-----
|
||||
# target platform: m32700ut
|
||||
|
||||
# setting
|
||||
set width 0d70
|
||||
set radix 0d16
|
||||
|
||||
debug_chaos
|
||||
|
||||
# clk xin:cpu:bif:bus=25:300:75:75
|
||||
define clock_init
|
||||
set *(unsigned long *)0x00ef4008 = 0x00000000
|
||||
set *(unsigned long *)0x00ef4004 = 0
|
||||
shell sleep 0.1
|
||||
# NOTE: Please change the master clock source from PLL-clock to Xin-clock
|
||||
# and switch off PLL, before resetting the clock gear ratio.
|
||||
|
||||
set *(unsigned long *)0x00ef4024 = 2
|
||||
set *(unsigned long *)0x00ef4020 = 2
|
||||
set *(unsigned long *)0x00ef4010 = 0
|
||||
set *(unsigned long *)0x00ef4014 = 0
|
||||
set *(unsigned long *)0x00ef4004 = 5
|
||||
shell sleep 0.1
|
||||
set *(unsigned long *)0x00ef4008 = 0x00000200
|
||||
end
|
||||
|
||||
# Initialize SDRAM controller
|
||||
define sdram_init
|
||||
# SDIR0
|
||||
set *(unsigned long *)0x00ef6008 = 0x00000182
|
||||
# SDIR1
|
||||
set *(unsigned long *)0x00ef600c = 0x00000001
|
||||
# Initialize wait
|
||||
shell sleep 0.1
|
||||
# Ch0-MOD
|
||||
set *(unsigned long *)0x00ef602c = 0x00000020
|
||||
# Ch0-TR
|
||||
set *(unsigned long *)0x00ef6028 = 0x00051502
|
||||
# Ch0-ADR (size:32MB)
|
||||
set *(unsigned long *)0x00ef6020 = 0x08000003
|
||||
# AutoRef On
|
||||
set *(unsigned long *)0x00ef6004 = 0x00010e24
|
||||
# Access enable
|
||||
set *(unsigned long *)0x00ef6024 = 0x00000001
|
||||
end
|
||||
document sdram_init
|
||||
SDRAM controller initialization
|
||||
0x08000000 - 0x09ffffff (32MB)
|
||||
end
|
||||
|
||||
# Initialize BSEL3 for UT-CFC
|
||||
define cfc_init
|
||||
set $sfrbase = 0xa0ef0000
|
||||
# too fast
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
|
||||
end
|
||||
document cfc_init
|
||||
CF controller initialization
|
||||
end
|
||||
|
||||
# MMU enable
|
||||
define mmu_enable
|
||||
set $evb=0x88000000
|
||||
set *(unsigned long *)0xffff0024=1
|
||||
end
|
||||
|
||||
# MMU disable
|
||||
define mmu_disable
|
||||
set $evb=0
|
||||
set *(unsigned long *)0xffff0024=0
|
||||
end
|
||||
|
||||
# Show TLB entries
|
||||
define show_tlb_entries
|
||||
set $i = 0
|
||||
set $addr = $arg0
|
||||
set $nr_entries = $arg1
|
||||
use_mon_code
|
||||
while ($i < $nr_entries)
|
||||
set $tlb_tag = *(unsigned long*)$addr
|
||||
set $tlb_data = *(unsigned long*)($addr + 4)
|
||||
printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
|
||||
set $i = $i + 1
|
||||
set $addr = $addr + 8
|
||||
end
|
||||
use_debug_dma
|
||||
end
|
||||
define itlb
|
||||
set $itlb=0xfe000000
|
||||
show_tlb_entries $itlb 0d32
|
||||
end
|
||||
define dtlb
|
||||
set $dtlb=0xfe000800
|
||||
show_tlb_entries $dtlb 0d32
|
||||
end
|
||||
|
||||
# Initialize TLB entries
|
||||
define init_tlb_entries
|
||||
set $i = 0
|
||||
set $addr = $arg0
|
||||
set $nr_entries = $arg1
|
||||
use_mon_code
|
||||
while ($i < $nr_entries)
|
||||
set *(unsigned long *)($addr + 0x4) = 0
|
||||
set $i = $i + 1
|
||||
set $addr = $addr + 8
|
||||
end
|
||||
use_debug_dma
|
||||
end
|
||||
define tlb_init
|
||||
set $itlb=0xfe000000
|
||||
init_tlb_entries $itlb 0d32
|
||||
set $dtlb=0xfe000800
|
||||
init_tlb_entries $dtlb 0d32
|
||||
end
|
||||
|
||||
# Show current task structure
|
||||
define show_current
|
||||
set $current = $spi & 0xffffe000
|
||||
printf "$current=0x%08lX\n",$current
|
||||
print *(struct task_struct *)$current
|
||||
end
|
||||
|
||||
# Show user assigned task structure
|
||||
define show_task
|
||||
set = $arg0 & 0xffffe000
|
||||
printf "$task=0x%08lX\n",$task
|
||||
print *(struct task_struct *)$task
|
||||
end
|
||||
document show_task
|
||||
Show user assigned task structure
|
||||
arg0 : task structure address
|
||||
end
|
||||
|
||||
# Show M32R registers
|
||||
define show_regs
|
||||
printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3
|
||||
printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7
|
||||
printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11
|
||||
printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp
|
||||
printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
|
||||
printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
|
||||
printf "EVB[0x%08lX]\n",$evb
|
||||
end
|
||||
|
||||
# Setup all
|
||||
define setup
|
||||
use_mon_code
|
||||
set *(unsigned int)0xfffffffc=0x60
|
||||
shell sleep 0.1
|
||||
clock_init
|
||||
shell sleep 0.1
|
||||
# SDRAM: 32MB
|
||||
set *(unsigned long *)0x00ef6020 = 0x08000003
|
||||
cfc_init
|
||||
# USB
|
||||
set *(unsigned short *)0xb0301000 = 0x100
|
||||
|
||||
set $evb=0x08000000
|
||||
end
|
||||
|
||||
# Load modules
|
||||
define load_modules
|
||||
use_debug_dma
|
||||
load
|
||||
end
|
||||
|
||||
# Set kernel parameters
|
||||
define set_kernel_parameters
|
||||
set $param = (void*)0x08001000
|
||||
# INITRD_START
|
||||
# set *(unsigned long *)($param + 0x0010) = 0x08300000
|
||||
# INITRD_SIZE
|
||||
# set *(unsigned long *)($param + 0x0014) = 0x00000000
|
||||
# M32R_CPUCLK
|
||||
set *(unsigned long *)($param + 0x0018) = 0d300000000
|
||||
# M32R_BUSCLK
|
||||
set *(unsigned long *)($param + 0x001c) = 0d75000000
|
||||
|
||||
# M32R_TIMER_DIVIDE
|
||||
set *(unsigned long *)($param + 0x0020) = 0d128
|
||||
|
||||
set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
|
||||
end
|
||||
|
||||
# Boot
|
||||
define boot
|
||||
set_kernel_parameters
|
||||
set $fp = 0
|
||||
set $pc = 0x08002000
|
||||
# set *(unsigned char *)0xffffffff = 0x03
|
||||
si
|
||||
c
|
||||
end
|
||||
|
||||
# Set breakpoints
|
||||
define set_breakpoints
|
||||
b *0x08000030
|
||||
end
|
||||
|
||||
# Restart
|
||||
define restart
|
||||
sdireset
|
||||
sdireset
|
||||
set $pc = 0
|
||||
b *0x04001000
|
||||
b *0x08001000
|
||||
b *0x08002000
|
||||
si
|
||||
c
|
||||
tlb_init
|
||||
del
|
||||
setup
|
||||
load_modules
|
||||
boot
|
||||
end
|
||||
|
||||
define si
|
||||
stepi
|
||||
x/i $pc
|
||||
show_reg
|
||||
end
|
||||
|
||||
sdireset
|
||||
sdireset
|
||||
file vmlinux
|
||||
target m32rsdi
|
||||
set $pc = 0
|
||||
b *0x04001000
|
||||
b *0x08001000
|
||||
b *0x08002000
|
||||
c
|
||||
tlb_init
|
||||
del
|
||||
setup
|
||||
load_modules
|
||||
boot
|
||||
|
||||
249
arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB
Normal file
249
arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB
Normal file
@@ -0,0 +1,249 @@
|
||||
# .gdbinit file
|
||||
# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $
|
||||
#-----
|
||||
# NOTE: this file is generated by a script, "gen_gdbinit.pl".
|
||||
# (Please type "gen_gdbinit.pl --help" and check the help message).
|
||||
# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
|
||||
#-----
|
||||
# target platform: m32700ut
|
||||
|
||||
# setting
|
||||
set width 0d70
|
||||
set radix 0d16
|
||||
|
||||
debug_chaos
|
||||
|
||||
# clk xin:cpu:bif:bus=25:400:100:50
|
||||
define clock_init
|
||||
set *(unsigned long *)0x00ef4008 = 0x00000000
|
||||
set *(unsigned long *)0x00ef4004 = 0
|
||||
shell sleep 0.1
|
||||
# NOTE: Please change the master clock source from PLL-clock to Xin-clock
|
||||
# and switch off PLL, before resetting the clock gear ratio.
|
||||
|
||||
set *(unsigned long *)0x00ef4024 = 3
|
||||
set *(unsigned long *)0x00ef4020 = 2
|
||||
set *(unsigned long *)0x00ef4010 = 0
|
||||
set *(unsigned long *)0x00ef4014 = 0
|
||||
set *(unsigned long *)0x00ef4004 = 7
|
||||
shell sleep 0.1
|
||||
set *(unsigned long *)0x00ef4008 = 0x00000200
|
||||
end
|
||||
|
||||
# Initialize SDRAM controller
|
||||
define sdram_init
|
||||
# SDIR0
|
||||
set *(unsigned long *)0x00ef6008 = 0x00000182
|
||||
# SDIR1
|
||||
set *(unsigned long *)0x00ef600c = 0x00000001
|
||||
# Initialize wait
|
||||
shell sleep 0.1
|
||||
# Ch0-MOD
|
||||
set *(unsigned long *)0x00ef602c = 0x00000020
|
||||
# Ch0-TR
|
||||
set *(unsigned long *)0x00ef6028 = 0x00041302
|
||||
# Ch0-ADR (size:32MB)
|
||||
set *(unsigned long *)0x00ef6020 = 0x08000003
|
||||
# AutoRef On
|
||||
set *(unsigned long *)0x00ef6004 = 0x00010517
|
||||
# Access enable
|
||||
set *(unsigned long *)0x00ef6024 = 0x00000001
|
||||
end
|
||||
document sdram_init
|
||||
SDRAM controller initialization
|
||||
0x08000000 - 0x09ffffff (32MB)
|
||||
end
|
||||
|
||||
# Initialize BSEL3 for UT-CFC
|
||||
define cfc_init
|
||||
set $sfrbase = 0xa0ef0000
|
||||
# too fast
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
|
||||
# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
|
||||
# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
|
||||
end
|
||||
document cfc_init
|
||||
CF controller initialization
|
||||
end
|
||||
|
||||
# MMU enable
|
||||
define mmu_enable
|
||||
set $evb=0x88000000
|
||||
set *(unsigned long *)0xffff0024=1
|
||||
end
|
||||
|
||||
# MMU disable
|
||||
define mmu_disable
|
||||
set $evb=0
|
||||
set *(unsigned long *)0xffff0024=0
|
||||
end
|
||||
|
||||
# Show TLB entries
|
||||
define show_tlb_entries
|
||||
set $i = 0
|
||||
set $addr = $arg0
|
||||
set $nr_entries = $arg1
|
||||
use_mon_code
|
||||
while ($i < $nr_entries)
|
||||
set $tlb_tag = *(unsigned long*)$addr
|
||||
set $tlb_data = *(unsigned long*)($addr + 4)
|
||||
printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
|
||||
set $i = $i + 1
|
||||
set $addr = $addr + 8
|
||||
end
|
||||
use_debug_dma
|
||||
end
|
||||
define itlb
|
||||
set $itlb=0xfe000000
|
||||
show_tlb_entries $itlb 0d32
|
||||
end
|
||||
define dtlb
|
||||
set $dtlb=0xfe000800
|
||||
show_tlb_entries $dtlb 0d32
|
||||
end
|
||||
|
||||
# Initialize TLB entries
|
||||
define init_tlb_entries
|
||||
set $i = 0
|
||||
set $addr = $arg0
|
||||
set $nr_entries = $arg1
|
||||
use_mon_code
|
||||
while ($i < $nr_entries)
|
||||
set *(unsigned long *)($addr + 0x4) = 0
|
||||
set $i = $i + 1
|
||||
set $addr = $addr + 8
|
||||
end
|
||||
use_debug_dma
|
||||
end
|
||||
define tlb_init
|
||||
set $itlb=0xfe000000
|
||||
init_tlb_entries $itlb 0d32
|
||||
set $dtlb=0xfe000800
|
||||
init_tlb_entries $dtlb 0d32
|
||||
end
|
||||
|
||||
# Show current task structure
|
||||
define show_current
|
||||
set $current = $spi & 0xffffe000
|
||||
printf "$current=0x%08lX\n",$current
|
||||
print *(struct task_struct *)$current
|
||||
end
|
||||
|
||||
# Show user assigned task structure
|
||||
define show_task
|
||||
set = $arg0 & 0xffffe000
|
||||
printf "$task=0x%08lX\n",$task
|
||||
print *(struct task_struct *)$task
|
||||
end
|
||||
document show_task
|
||||
Show user assigned task structure
|
||||
arg0 : task structure address
|
||||
end
|
||||
|
||||
# Show M32R registers
|
||||
define show_regs
|
||||
printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3
|
||||
printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7
|
||||
printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11
|
||||
printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp
|
||||
printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
|
||||
printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
|
||||
printf "EVB[0x%08lX]\n",$evb
|
||||
end
|
||||
|
||||
# Setup all
|
||||
define setup
|
||||
use_mon_code
|
||||
set *(unsigned int)0xfffffffc=0x60
|
||||
shell sleep 0.1
|
||||
clock_init
|
||||
shell sleep 0.1
|
||||
# SDRAM: 32MB
|
||||
set *(unsigned long *)0x00ef6020 = 0x08000003
|
||||
cfc_init
|
||||
# USB
|
||||
set *(unsigned short *)0xb0301000 = 0x100
|
||||
|
||||
set $evb=0x08000000
|
||||
end
|
||||
|
||||
# Load modules
|
||||
define load_modules
|
||||
use_debug_dma
|
||||
load
|
||||
end
|
||||
|
||||
# Set kernel parameters
|
||||
define set_kernel_parameters
|
||||
set $param = (void*)0x08001000
|
||||
# INITRD_START
|
||||
# set *(unsigned long *)($param + 0x0010) = 0x08300000
|
||||
# INITRD_SIZE
|
||||
# set *(unsigned long *)($param + 0x0014) = 0x00000000
|
||||
# M32R_CPUCLK
|
||||
set *(unsigned long *)($param + 0x0018) = 0d400000000
|
||||
# M32R_BUSCLK
|
||||
set *(unsigned long *)($param + 0x001c) = 0d50000000
|
||||
|
||||
# M32R_TIMER_DIVIDE
|
||||
set *(unsigned long *)($param + 0x0020) = 0d128
|
||||
|
||||
set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
|
||||
end
|
||||
|
||||
# Boot
|
||||
define boot
|
||||
set_kernel_parameters
|
||||
set $fp = 0
|
||||
set $pc = 0x08002000
|
||||
# set *(unsigned char *)0xffffffff = 0x03
|
||||
si
|
||||
c
|
||||
end
|
||||
|
||||
# Set breakpoints
|
||||
define set_breakpoints
|
||||
b *0x08000030
|
||||
end
|
||||
|
||||
# Restart
|
||||
define restart
|
||||
sdireset
|
||||
sdireset
|
||||
set $pc = 0
|
||||
b *0x04001000
|
||||
b *0x08001000
|
||||
b *0x08002000
|
||||
si
|
||||
c
|
||||
tlb_init
|
||||
del
|
||||
setup
|
||||
load_modules
|
||||
boot
|
||||
end
|
||||
|
||||
define si
|
||||
stepi
|
||||
x/i $pc
|
||||
show_reg
|
||||
end
|
||||
|
||||
sdireset
|
||||
sdireset
|
||||
file vmlinux
|
||||
target m32rsdi
|
||||
set $pc = 0
|
||||
b *0x04001000
|
||||
b *0x08001000
|
||||
b *0x08002000
|
||||
c
|
||||
tlb_init
|
||||
del
|
||||
setup
|
||||
load_modules
|
||||
boot
|
||||
|
||||
Reference in New Issue
Block a user