Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

arch/arm/mm/cache-v4wb.S

@@ -0,0 +1,216 @@
+/*
+ *  linux/arch/arm/mm/cache-v4wb.S
+ *
+ *  Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE	32
+
+/*
+ * The total size of the data cache.
+ */
+#if defined(CONFIG_CPU_SA110)
+# define CACHE_DSIZE	16384
+#elif defined(CONFIG_CPU_SA1100)
+# define CACHE_DSIZE	8192
+#else
+# error Unknown cache size
+#endif
+
+/*
+ * This is the size at which it becomes more efficient to
+ * clean the whole cache, rather than using the individual
+ * cache line maintainence instructions.
+ *
+ *  Size  Clean (ticks) Dirty (ticks)
+ *   4096   21  20  21    53  55  54
+ *   8192   40  41  40   106 100 102
+ *  16384   77  77  76   140 140 138
+ *  32768  150 149 150   214 216 212 <---
+ *  65536  296 297 296   351 358 361
+ * 131072  591 591 591   656 657 651
+ *  Whole  132 136 132   221 217 207 <---
+ */
+#define CACHE_DLIMIT	(CACHE_DSIZE * 4)
+
+/*
+ *	flush_user_cache_all()
+ *
+ *	Clean and invalidate all cache entries in a particular address
+ *	space.
+ */
+ENTRY(v4wb_flush_user_cache_all)
+	/* FALLTHROUGH */
+/*
+ *	flush_kern_cache_all()
+ *
+ *	Clean and invalidate the entire cache.
+ */
+ENTRY(v4wb_flush_kern_cache_all)
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+__flush_whole_cache:
+	mov	r0, #FLUSH_BASE
+	add	r1, r0, #CACHE_DSIZE
+1:	ldr	r2, [r0], #32
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, ip, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	flush_user_cache_range(start, end, flags)
+ *
+ *	Invalidate a range of cache entries in the specified
+ *	address space.
+ *
+ *	- start - start address (inclusive, page aligned)
+ *	- end	- end address (exclusive, page aligned)
+ *	- flags	- vma_area_struct flags describing address space
+ */
+ENTRY(v4wb_flush_user_cache_range)
+	sub	r3, r1, r0			@ calculate total size
+	tst	r2, #VM_EXEC			@ executable region?
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+
+	cmp	r3, #CACHE_DLIMIT		@ total size >= limit?
+	bhs	__flush_whole_cache		@ flush whole D cache
+
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	tst	r2, #VM_EXEC
+	mcrne	p15, 0, ip, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	flush_kern_dcache_page(void *page)
+ *
+ *	Ensure no D cache aliasing occurs, either with itself or
+ *	the I cache
+ *
+ *	- addr	- page aligned address
+ */
+ENTRY(v4wb_flush_kern_dcache_page)
+	add	r1, r0, #PAGE_SZ
+	/* fall through */
+
+/*
+ *	coherent_kern_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wb_coherent_kern_range)
+	/* fall through */
+
+/*
+ *	coherent_user_range(start, end)
+ *
+ *	Ensure coherency between the Icache and the Dcache in the
+ *	region described by start.  If you have non-snooping
+ *	Harvard caches, you need to implement this function.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wb_coherent_user_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mov	ip, #0
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
+	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
+	mov	pc, lr
+
+
+/*
+ *	dma_inv_range(start, end)
+ *
+ *	Invalidate (discard) the specified virtual address range.
+ *	May not write back any entries.  If 'start' or 'end'
+ *	are not cache line aligned, those lines must be written
+ *	back.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wb_dma_inv_range)
+	tst	r0, #CACHE_DLINESIZE - 1
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
+	tst	r1, #CACHE_DLINESIZE - 1
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	dma_clean_range(start, end)
+ *
+ *	Clean (write back) the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ */
+ENTRY(v4wb_dma_clean_range)
+	bic	r0, r0, #CACHE_DLINESIZE - 1
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+	add	r0, r0, #CACHE_DLINESIZE
+	cmp	r0, r1
+	blo	1b
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
+	mov	pc, lr
+
+/*
+ *	dma_flush_range(start, end)
+ *
+ *	Clean and invalidate the specified virtual address range.
+ *
+ *	- start  - virtual start address
+ *	- end	 - virtual end address
+ *
+ *	This is actually the same as v4wb_coherent_kern_range()
+ */
+	.globl	v4wb_dma_flush_range
+	.set	v4wb_dma_flush_range, v4wb_coherent_kern_range
+
+	__INITDATA
+
+	.type	v4wb_cache_fns, #object
+ENTRY(v4wb_cache_fns)
+	.long	v4wb_flush_kern_cache_all
+	.long	v4wb_flush_user_cache_all
+	.long	v4wb_flush_user_cache_range
+	.long	v4wb_coherent_kern_range
+	.long	v4wb_coherent_user_range
+	.long	v4wb_flush_kern_dcache_page
+	.long	v4wb_dma_inv_range
+	.long	v4wb_dma_clean_range
+	.long	v4wb_dma_flush_range
+	.size	v4wb_cache_fns, . - v4wb_cache_fns