Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

arch/arm/lib/backtrace.S

@@ -0,0 +1,157 @@
+/*
+ *  linux/arch/arm/lib/backtrace.S
+ *
+ *  Copyright (C) 1995, 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 27/03/03 Ian Molton Clean up CONFIG_CPU
+ *
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+		.text
+
+@ fp is 0 or stack frame
+
+#define frame	r4
+#define next	r5
+#define save	r6
+#define mask	r7
+#define offset	r8
+
+ENTRY(__backtrace)
+		mov	r1, #0x10
+		mov	r0, fp
+
+ENTRY(c_backtrace)
+
+#ifndef CONFIG_FRAME_POINTER
+		mov	pc, lr
+#else
+
+		stmfd	sp!, {r4 - r8, lr}	@ Save an extra register so we have a location...
+		tst	r1, #0x10		@ 26 or 32-bit?
+		moveq	mask, #0xfc000003
+		movne	mask, #0
+		tst	mask, r0
+		movne	r0, #0
+		movs	frame, r0
+1:		moveq	r0, #-2
+		LOADREGS(eqfd, sp!, {r4 - r8, pc})
+
+2:		stmfd	sp!, {pc}		@ calculate offset of PC in STMIA instruction
+		ldr	r0, [sp], #4
+		adr	r1, 2b - 4
+		sub	offset, r0, r1
+
+3:		tst	frame, mask		@ Check for address exceptions...
+		bne	1b
+
+1001:		ldr	next, [frame, #-12]	@ get fp
+1002:		ldr	r2, [frame, #-4]	@ get lr
+1003:		ldr	r3, [frame, #0]		@ get pc
+		sub	save, r3, offset	@ Correct PC for prefetching
+		bic	save, save, mask
+1004:		ldr	r1, [save, #0]		@ get instruction at function
+		mov	r1, r1, lsr #10
+		ldr	r3, .Ldsi+4
+		teq	r1, r3
+		subeq	save, save, #4
+		mov	r0, save
+		bic	r1, r2, mask
+		bl	dump_backtrace_entry
+
+		ldr	r0, [frame, #-8]	@ get sp
+		sub	r0, r0, #4
+1005:		ldr	r1, [save, #4]		@ get instruction at function+4
+		mov	r3, r1, lsr #10
+		ldr	r2, .Ldsi+4
+		teq	r3, r2			@ Check for stmia sp!, {args}
+		addeq	save, save, #4		@ next instruction
+		bleq	.Ldumpstm
+
+		sub	r0, frame, #16
+1006:		ldr	r1, [save, #4]		@ Get 'stmia sp!, {rlist, fp, ip, lr, pc}' instruction
+		mov	r3, r1, lsr #10
+		ldr	r2, .Ldsi
+		teq	r3, r2
+		bleq	.Ldumpstm
+
+		/*
+		 * A zero next framepointer means we're done.
+		 */
+		teq	next, #0
+		LOADREGS(eqfd, sp!, {r4 - r8, pc})
+
+		/*
+		 * The next framepointer must be above the
+		 * current framepointer.
+		 */
+		cmp	next, frame
+		mov	frame, next
+		bhi	3b
+		b	1007f
+
+/*
+ * Fixup for LDMDB
+ */
+		.section .fixup,"ax"
+		.align	0
+1007:		ldr	r0, =.Lbad
+		mov	r1, frame
+		bl	printk
+		LOADREGS(fd, sp!, {r4 - r8, pc})
+		.ltorg
+		.previous
+		
+		.section __ex_table,"a"
+		.align	3
+		.long	1001b, 1007b
+		.long	1002b, 1007b
+		.long	1003b, 1007b
+		.long	1004b, 1007b
+		.long	1005b, 1007b
+		.long	1006b, 1007b
+		.previous
+
+#define instr r4
+#define reg   r5
+#define stack r6
+
+.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
+		mov	stack, r0
+		mov	instr, r1
+		mov	reg, #9
+		mov	r7, #0
+1:		mov	r3, #1
+		tst	instr, r3, lsl reg
+		beq	2f
+		add	r7, r7, #1
+		teq	r7, #4
+		moveq	r7, #0
+		moveq	r3, #'\n'
+		movne	r3, #' '
+		ldr	r2, [stack], #-4
+		mov	r1, reg
+		adr	r0, .Lfp
+		bl	printk
+2:		subs	reg, reg, #1
+		bpl	1b
+		teq	r7, #0
+		adrne	r0, .Lcr
+		blne	printk
+		mov	r0, stack
+		LOADREGS(fd, sp!, {instr, reg, stack, r7, pc})
+
+.Lfp:		.asciz	" r%d = %08X%c"
+.Lcr:		.asciz	"\n"
+.Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
+		.align
+.Ldsi:		.word	0x00e92dd8 >> 2
+		.word	0x00e92d00 >> 2
+
+#endif