ARM: DT: imx53: fix lvds channel 1 port

using LVDS channel 1 on an i.MX53 leads to following error:

imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1

This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for
reparenting di1 clock to ldb_di1. The value of the mux param comes from device
tree port settings.

On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations,
only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1],
respectively)

Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de>

Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Fixes: e05c8c9a79 ("ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi")
Cc: <stable@vger.kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/imx53.dtsi

@@ -423,10 +423,14 @@
 				status = "disabled";
 
 				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <0>;
 					status = "disabled";
 
-					port {
+					port@0 {
+						reg = <0>;
+
 						lvds0_in: endpoint {
 							remote-endpoint = <&ipu_di0_lvds0>;
 						};
@@ -434,10 +438,14 @@
 				};
 
 				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <1>;
 					status = "disabled";
 
-					port {
+					port@1 {
+						reg = <1>;
+
 						lvds1_in: endpoint {
 							remote-endpoint = <&ipu_di1_lvds1>;
 						};