x86/mid: Remove Intel Moorestown

All production devices operate in the Oaktrail configuration
with legacy PC elements present and an ACPI BIOS. Continue
stripping out the Moorestown elements from the tree leaving
Medfield.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: jacob.jun.pan@linux.intel.com
Link: http://lkml.kernel.org/n/tip-fvm1hgpq99jln6l0fbek68ik@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/platform/mrst/mrst.c

@@ -78,16 +78,11 @@ int sfi_mrtc_num;
 
 static void mrst_power_off(void)
 {
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
-		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1);
 }
 
 static void mrst_reboot(void)
 {
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
-		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
-	else
-		intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+	intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
 }
 
 /* parse all the mtimer info to a static mtimer array */
@@ -200,34 +195,28 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 
 static unsigned long __init mrst_calibrate_tsc(void)
 {
-	unsigned long flags, fast_calibrate;
-	if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
-		u32 lo, hi, ratio, fsb;
+	unsigned long fast_calibrate;
+	u32 lo, hi, ratio, fsb;
 
-		rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-		pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
-		ratio = (hi >> 8) & 0x1f;
-		pr_debug("ratio is %d\n", ratio);
-		if (!ratio) {
-			pr_err("read a zero ratio, should be incorrect!\n");
-			pr_err("force tsc ratio to 16 ...\n");
-			ratio = 16;
-		}
-		rdmsr(MSR_FSB_FREQ, lo, hi);
-		if ((lo & 0x7) == 0x7)
-			fsb = PENWELL_FSB_FREQ_83SKU;
-		else
-			fsb = PENWELL_FSB_FREQ_100SKU;
-		fast_calibrate = ratio * fsb;
-		pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
-		lapic_timer_frequency = fsb * 1000 / HZ;
-		/* mark tsc clocksource as reliable */
-		set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
-	} else {
-		local_irq_save(flags);
-		fast_calibrate = apbt_quick_calibrate();
-		local_irq_restore(flags);
+	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+	pr_debug("IA32 perf status is 0x%x, 0x%0x\n", lo, hi);
+	ratio = (hi >> 8) & 0x1f;
+	pr_debug("ratio is %d\n", ratio);
+	if (!ratio) {
+		pr_err("read a zero ratio, should be incorrect!\n");
+		pr_err("force tsc ratio to 16 ...\n");
+		ratio = 16;
 	}
+	rdmsr(MSR_FSB_FREQ, lo, hi);
+	if ((lo & 0x7) == 0x7)
+		fsb = PENWELL_FSB_FREQ_83SKU;
+	else
+		fsb = PENWELL_FSB_FREQ_100SKU;
+	fast_calibrate = ratio * fsb;
+	pr_debug("read penwell tsc %lu khz\n", fast_calibrate);
+	lapic_timer_frequency = fsb * 1000 / HZ;
+	/* mark tsc clocksource as reliable */
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
 	
 	if (fast_calibrate)
 		return fast_calibrate;
@@ -261,16 +250,11 @@ static void __cpuinit mrst_arch_setup(void)
 {
 	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
 		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
-	else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26)
-		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
 	else {
-		pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n",
+		pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
 			boot_cpu_data.x86, boot_cpu_data.x86_model);
-		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
 	}
-	pr_debug("Moorestown CPU %s identified\n",
-		(__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
-		"Lincroft" : "Penwell");
 }
 
 /* MID systems don't have i8042 controller */