trivial: Miscellaneous documentation typo fixes

Fix various typos in documentation txts.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/networking/bonding.txt

@@ -221,7 +221,7 @@ ad_select
 
 		- Any slave's 802.3ad association state changes
 
-		- The bond's adminstrative state changes to up
+		- The bond's administrative state changes to up
 
 	count or 2
 
@@ -369,7 +369,7 @@ fail_over_mac
 		When this policy is used in conjuction with the mii
 		monitor, devices which assert link up prior to being
 		able to actually transmit and receive are particularly
-		susecptible to loss of the gratuitous ARP, and an
+		susceptible to loss of the gratuitous ARP, and an
 		appropriate updelay setting may be required.
 
 	follow or 2
@@ -1794,7 +1794,7 @@ target to query.
 generally referred to as "trunk failover."  This is a feature of the
 switch that causes the link state of a particular switch port to be set
 down (or up) when the state of another switch port goes down (or up).
-It's purpose is to propogate link failures from logically "exterior" ports
+Its purpose is to propagate link failures from logically "exterior" ports
 to the logically "interior" ports that bonding is able to monitor via
 miimon.  Availability and configuration for trunk failover varies by
 switch, but this can be a viable alternative to the ARP monitor when using

Documentation/networking/can.txt

@@ -327,7 +327,7 @@ solution for a couple of reasons:
             return 1;
     }
 
-    /* paraniod check ... */
+    /* paranoid check ... */
     if (nbytes < sizeof(struct can_frame)) {
             fprintf(stderr, "read: incomplete CAN frame\n");
             return 1;

Documentation/networking/dm9000.txt

@@ -129,7 +129,7 @@ PHY Link state polling
 ----------------------
 
 The driver keeps track of the link state and informs the network core
-about link (carrier) availablilty. This is managed by several methods
+about link (carrier) availability. This is managed by several methods
 depending on the version of the chip and on which PHY is being used.
 
 For the internal PHY, the original (and currently default) method is

Documentation/networking/l2tp.txt

@@ -158,7 +158,7 @@ Sample Userspace Code
         }
         return 0;
 
-Miscellanous
+Miscellaneous
 ============
 
 The PPPoL2TP driver was developed as part of the OpenL2TP project by

Documentation/networking/netdevices.txt

@@ -74,7 +74,7 @@ dev->hard_start_xmit:
 	for this and return NETDEV_TX_LOCKED when the spin lock fails.
 	The locking there should also properly protect against 
 	set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated.
-	Dont use it for new drivers.
+	Don't use it for new drivers.
 
 	Context: Process with BHs disabled or BH (timer),
 	         will be called with interrupts disabled by netconsole.

Documentation/networking/phonet.txt

@@ -36,7 +36,7 @@ Phonet packets have a common header as follows:
 On Linux, the link-layer header includes the pn_media byte (see below).
 The next 7 bytes are part of the network-layer header.
 
-The device ID is split: the 6 higher-order bits consitute the device
+The device ID is split: the 6 higher-order bits constitute the device
 address, while the 2 lower-order bits are used for multiplexing, as are
 the 8-bit object identifiers. As such, Phonet can be considered as a
 network layer with 6 bits of address space and 10 bits for transport

Documentation/networking/regulatory.txt

@@ -89,7 +89,7 @@ added to this document when its support is enabled.
 Device drivers who provide their own built regulatory domain
 do not need a callback as the channels registered by them are
 the only ones that will be allowed and therefore *additional*
-cannels cannot be enabled.
+channels cannot be enabled.
 
 Example code - drivers hinting an alpha2:
 ------------------------------------------