Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux into arm/drivers

This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes
for 5.1, please pull the following:

- Stefan updates the BCM2835 SoC driver with downstream properties and
  uses that to implement a reboot notifier to tell the VC4 firmware when
  Linux on the ARM CPU is rebooting

- Eric adds a proper power domain driver for the BCM283x SoCs and
  updates a bunch of drivers to have a better and clearer Device Tree
  definition to support power domains/breaking up of functionality. This
  requires converting the existing watchdog driver into a MFD and then
  breaking up the functionality into separate drivers and finally
  updating the DTS files to leverage the power domains information.

- Wei provides a fix for making a symbol static

* tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux:
  ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.
  ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4)
  soc: bcm: bcm2835-pm: Make local symbol static
  soc: bcm: Make PM driver default for BCM2835
  soc: bcm: bcm2835-pm: Add support for power domains under a new binding.
  bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
  firmware: raspberrypi: notify VC4 firmware of a reboot
  soc: bcm2835: sync firmware properties with downstream

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

drivers/mfd/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
 obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
 obj-$(CONFIG_MFD_SM501)		+= sm501.o
 obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
+obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835-pm.o
 obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
 cros_ec_core-objs		:= cros_ec.o

drivers/mfd/bcm2835-pm.c

@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PM MFD driver for Broadcom BCM2835
+ *
+ * This driver binds to the PM block and creates the MFD device for
+ * the WDT and power drivers.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/bcm2835-pm.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+static const struct mfd_cell bcm2835_pm_devs[] = {
+	{ .name = "bcm2835-wdt" },
+};
+
+static const struct mfd_cell bcm2835_power_devs[] = {
+	{ .name = "bcm2835-power" },
+};
+
+static int bcm2835_pm_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct bcm2835_pm *pm;
+	int ret;
+
+	pm = devm_kzalloc(dev, sizeof(*pm), GFP_KERNEL);
+	if (!pm)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, pm);
+
+	pm->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pm->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pm->base))
+		return PTR_ERR(pm->base);
+
+	ret = devm_mfd_add_devices(dev, -1,
+				   bcm2835_pm_devs, ARRAY_SIZE(bcm2835_pm_devs),
+				   NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	/* We'll use the presence of the AXI ASB regs in the
+	 * bcm2835-pm binding as the key for whether we can reference
+	 * the full PM register range and support power domains.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		pm->asb = devm_ioremap_resource(dev, res);
+		if (IS_ERR(pm->asb))
+			return PTR_ERR(pm->asb);
+
+		ret = devm_mfd_add_devices(dev, -1,
+					   bcm2835_power_devs,
+					   ARRAY_SIZE(bcm2835_power_devs),
+					   NULL, 0, NULL);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_pm_of_match[] = {
+	{ .compatible = "brcm,bcm2835-pm-wdt", },
+	{ .compatible = "brcm,bcm2835-pm", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
+
+static struct platform_driver bcm2835_pm_driver = {
+	.probe		= bcm2835_pm_probe,
+	.driver = {
+		.name =	"bcm2835-pm",
+		.of_match_table = bcm2835_pm_of_match,
+	},
+};
+module_platform_driver(bcm2835_pm_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM MFD");
+MODULE_LICENSE("GPL");