irqchip: mips-gic: Stop using per-platform mapping tables

Now that the GIC properly uses IRQ domains, kill off the per-platform
routing tables that were used to make the GIC appear transparent.

This includes:
 - removing the mapping tables and the support for applying them,
 - moving GIC IPI support to the GIC driver,
 - properly routing the i8259 through the GIC on Malta, and
 - updating IRQ assignments on SEAD-3 when the GIC is present.

Platforms no longer will pass an interrupt mapping table to gic_init.
Instead, they will pass the CPU interrupt vector (2 - 7) that they
expect the GIC to route interrupts to.  Note that in EIC mode this
value is ignored and all GIC interrupts are routed to EIC vector 1.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
Tested-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7816/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/mips-boards/maltaint.h

@@ -20,11 +20,10 @@
 #define MIPSCPU_INT_SW1		1
 #define MIPSCPU_INT_MB0		2
 #define MIPSCPU_INT_I8259A	MIPSCPU_INT_MB0
+#define MIPSCPU_INT_GIC		MIPSCPU_INT_MB0 /* GIC chained interrupt */
 #define MIPSCPU_INT_MB1		3
 #define MIPSCPU_INT_SMI		MIPSCPU_INT_MB1
-#define MIPSCPU_INT_IPI0	MIPSCPU_INT_MB1 /* GIC IPI */
 #define MIPSCPU_INT_MB2		4
-#define MIPSCPU_INT_IPI1	MIPSCPU_INT_MB2 /* GIC IPI */
 #define MIPSCPU_INT_MB3		5
 #define MIPSCPU_INT_COREHI	MIPSCPU_INT_MB3
 #define MIPSCPU_INT_MB4		6
@@ -61,14 +60,7 @@
 #define MSC01E_INT_PERFCTR	10
 #define MSC01E_INT_CPUCTR	11
 
-/* External Interrupts used for IPI */
-#define GIC_IPI_EXT_INTR_RESCHED_VPE0	16
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE0	17
-#define GIC_IPI_EXT_INTR_RESCHED_VPE1	18
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE1	19
-#define GIC_IPI_EXT_INTR_RESCHED_VPE2	20
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE2	21
-#define GIC_IPI_EXT_INTR_RESCHED_VPE3	22
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE3	23
+/* GIC external interrupts */
+#define GIC_INT_I8259A		3
 
 #endif /* !(_MIPS_MALTAINT_H) */

arch/mips/include/asm/mips-boards/sead3int.h

@@ -14,4 +14,17 @@
 #define GIC_BASE_ADDR		0x1b1c0000
 #define GIC_ADDRSPACE_SZ	(128 * 1024)
 
+/* CPU interrupt offsets */
+#define CPU_INT_GIC		2
+#define CPU_INT_EHCI		2
+#define CPU_INT_UART0		4
+#define CPU_INT_UART1		4
+#define CPU_INT_NET		6
+
+/* GIC interrupt offsets */
+#define GIC_INT_NET		0
+#define GIC_INT_UART1		2
+#define GIC_INT_UART0		3
+#define GIC_INT_EHCI		5
+
 #endif /* !(_MIPS_SEAD3INT_H) */