Merge by hand (conflicts in sd.c)

2005-09-06 17:52:54 -05:00
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -6,7 +6,7 @@
 *          Title:  MPI Message independent structures and definitions
 *  Creation Date:  July 27, 2000
 *
- *    mpi.h Version:  01.05.07
+ *    mpi.h Version:  01.05.08
 *
 *  Version History
 *  ---------------
@@ -71,6 +71,9 @@
 *  03-11-05  01.05.07  Removed function codes for SCSI IO 32 and
 *                      TargetAssistExtended requests.
 *                      Removed EEDP IOCStatus codes.
+ *  06-24-05  01.05.08  Added function codes for SCSI IO 32 and
+ *                      TargetAssistExtended requests.
+ *                      Added EEDP IOCStatus codes.
 *  --------------------------------------------------------------------------
 */

@@ -101,7 +104,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */

 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x09)
+#define MPI_HEADER_VERSION_UNIT             (0x0A)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)
@@ -292,10 +295,13 @@
 #define MPI_FUNCTION_DIAG_BUFFER_POST               (0x1D)
 #define MPI_FUNCTION_DIAG_RELEASE                   (0x1E)

+#define MPI_FUNCTION_SCSI_IO_32                     (0x1F)
+
 #define MPI_FUNCTION_LAN_SEND                       (0x20)
 #define MPI_FUNCTION_LAN_RECEIVE                    (0x21)
 #define MPI_FUNCTION_LAN_RESET                      (0x22)

+#define MPI_FUNCTION_TARGET_ASSIST_EXTENDED         (0x23)
 #define MPI_FUNCTION_TARGET_CMD_BUF_BASE_POST       (0x24)
 #define MPI_FUNCTION_TARGET_CMD_BUF_LIST_POST       (0x25)

@@ -680,6 +686,15 @@ typedef struct _MSG_DEFAULT_REPLY
 #define MPI_IOCSTATUS_SCSI_IOC_TERMINATED       (0x004B)
 #define MPI_IOCSTATUS_SCSI_EXT_TERMINATED       (0x004C)

+/****************************************************************************/
+/*  For use by SCSI Initiator and SCSI Target end-to-end data protection    */
+/****************************************************************************/
+
+#define MPI_IOCSTATUS_EEDP_GUARD_ERROR          (0x004D)
+#define MPI_IOCSTATUS_EEDP_REF_TAG_ERROR        (0x004E)
+#define MPI_IOCSTATUS_EEDP_APP_TAG_ERROR        (0x004F)
+
+
 /****************************************************************************/
 /*  SCSI Target values                                                      */
 /****************************************************************************/
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -6,7 +6,7 @@
 *          Title:  MPI Config message, structures, and Pages
 *  Creation Date:  July 27, 2000
 *
- *    mpi_cnfg.h Version:  01.05.08
+ *    mpi_cnfg.h Version:  01.05.09
 *
 *  Version History
 *  ---------------
@@ -232,6 +232,23 @@
 *                      New physical mapping mode in SAS IO Unit Page 2.
 *                      Added CONFIG_PAGE_SAS_ENCLOSURE_0.
 *                      Added Slot and Enclosure fields to SAS Device Page 0.
+ *  06-24-05  01.05.09  Added EEDP defines to IOC Page 1.
+ *                      Added more RAID type defines to IOC Page 2.
+ *                      Added Port Enable Delay settings to BIOS Page 1.
+ *                      Added Bad Block Table Full define to RAID Volume Page 0.
+ *                      Added Previous State defines to RAID Physical Disk
+ *                      Page 0.
+ *                      Added Max Sata Targets define for DiscoveryStatus field
+ *                      of SAS IO Unit Page 0.
+ *                      Added Device Self Test to Control Flags of SAS IO Unit
+ *                      Page 1.
+ *                      Added Direct Attach Starting Slot Number define for SAS
+ *                      IO Unit Page 2.
+ *                      Added new fields in SAS Device Page 2 for enclosure
+ *                      mapping.
+ *                      Added OwnerDevHandle and Flags field to SAS PHY Page 0.
+ *                      Added IOC GPIO Flags define to SAS Enclosure Page 0.
+ *                      Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
 *  --------------------------------------------------------------------------
 */

@@ -477,6 +494,7 @@ typedef struct _MSG_CONFIG_REPLY
 #define MPI_MANUFACTPAGE_DEVICEID_FC929X            (0x0626)
 #define MPI_MANUFACTPAGE_DEVICEID_FC939X            (0x0642)
 #define MPI_MANUFACTPAGE_DEVICEID_FC949X            (0x0640)
+#define MPI_MANUFACTPAGE_DEVICEID_FC949ES           (0x0646)
 /* SCSI */
 #define MPI_MANUFACTPAGE_DEVID_53C1030              (0x0030)
 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC            (0x0031)
@@ -769,9 +787,13 @@ typedef struct _CONFIG_PAGE_IOC_1
 } CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1,
  IOCPage1_t, MPI_POINTER pIOCPage1_t;

-#define MPI_IOCPAGE1_PAGEVERSION                        (0x02)
+#define MPI_IOCPAGE1_PAGEVERSION                        (0x03)

 /* defines for the Flags field */
+#define MPI_IOCPAGE1_EEDP_MODE_MASK                     (0x07000000)
+#define MPI_IOCPAGE1_EEDP_MODE_OFF                      (0x00000000)
+#define MPI_IOCPAGE1_EEDP_MODE_T10                      (0x01000000)
+#define MPI_IOCPAGE1_EEDP_MODE_LSI_1                    (0x02000000)
 #define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE    (0x00000010)
 #define MPI_IOCPAGE1_REPLY_COALESCING                   (0x00000001)

@@ -795,6 +817,11 @@ typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL
 #define MPI_RAID_VOL_TYPE_IS                        (0x00)
 #define MPI_RAID_VOL_TYPE_IME                       (0x01)
 #define MPI_RAID_VOL_TYPE_IM                        (0x02)
+#define MPI_RAID_VOL_TYPE_RAID_5                    (0x03)
+#define MPI_RAID_VOL_TYPE_RAID_6                    (0x04)
+#define MPI_RAID_VOL_TYPE_RAID_10                   (0x05)
+#define MPI_RAID_VOL_TYPE_RAID_50                   (0x06)
+#define MPI_RAID_VOL_TYPE_UNKNOWN                   (0xFF)

 /* IOC Page 2 Volume Flags values */

@@ -820,13 +847,17 @@ typedef struct _CONFIG_PAGE_IOC_2
 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
  IOCPage2_t, MPI_POINTER pIOCPage2_t;

-#define MPI_IOCPAGE2_PAGEVERSION                        (0x02)
+#define MPI_IOCPAGE2_PAGEVERSION                        (0x03)

 /* IOC Page 2 Capabilities flags */

 #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT               (0x00000001)
 #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT              (0x00000002)
 #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT               (0x00000004)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT           (0x00000008)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT           (0x00000010)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT          (0x00000020)
+#define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT          (0x00000040)
 #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT              (0x20000000)
 #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT            (0x40000000)
 #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT    (0x80000000)
@@ -945,7 +976,7 @@ typedef struct _CONFIG_PAGE_BIOS_1
 } CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
  BIOSPage1_t, MPI_POINTER pBIOSPage1_t;

-#define MPI_BIOSPAGE1_PAGEVERSION                       (0x01)
+#define MPI_BIOSPAGE1_PAGEVERSION                       (0x02)

 /* values for the BiosOptions field */
 #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE                (0x00000400)
@@ -954,6 +985,8 @@ typedef struct _CONFIG_PAGE_BIOS_1
 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS              (0x00000001)

 /* values for the IOCSettings field */
+#define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY     (0x00F00000)
+#define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY    (20)
 #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE       (0x00030000)
 #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT        (0x00000000)
 #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT           (0x00010000)
@@ -1167,6 +1200,7 @@ typedef struct _CONFIG_PAGE_BIOS_2
 #define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER              (0x03)
 #define MPI_BIOSPAGE2_FORM_FC_WWN                       (0x04)
 #define MPI_BIOSPAGE2_FORM_SAS_WWN                      (0x05)
+#define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT               (0x06)


 /****************************************************************************
@@ -1957,11 +1991,11 @@ typedef struct _RAID_VOL0_STATUS
  RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t;

 /* RAID Volume Page 0 VolumeStatus defines */
-
 #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED                (0x01)
 #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED               (0x02)
 #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS     (0x04)
 #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE        (0x08)
+#define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL   (0x10)

 #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL               (0x00)
 #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED              (0x01)
@@ -2025,7 +2059,7 @@ typedef struct _CONFIG_PAGE_RAID_VOL_0
 } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
  RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;

-#define MPI_RAIDVOLPAGE0_PAGEVERSION                    (0x04)
+#define MPI_RAIDVOLPAGE0_PAGEVERSION                    (0x05)

 /* values for RAID Volume Page 0 InactiveStatus field */
 #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE               (0x00)
@@ -2104,6 +2138,8 @@ typedef struct _RAID_PHYS_DISK0_STATUS
 #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC           (0x01)
 #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED              (0x02)
 #define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME       (0x04)
+#define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS      (0x00)
+#define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS  (0x08)

 #define MPI_PHYSDISK0_STATUS_ONLINE                     (0x00)
 #define MPI_PHYSDISK0_STATUS_MISSING                    (0x01)
@@ -2132,7 +2168,7 @@ typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0
 } CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0,
  RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t;

-#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION           (0x01)
+#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION           (0x02)


 typedef struct _RAID_PHYS_DISK1_PATH
@@ -2263,7 +2299,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
  SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;

-#define MPI_SASIOUNITPAGE0_PAGEVERSION      (0x02)
+#define MPI_SASIOUNITPAGE0_PAGEVERSION      (0x03)

 /* values for SAS IO Unit Page 0 PortFlags */
 #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS    (0x08)
@@ -2299,6 +2335,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 #define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK                 (0x00000200)
 #define MPI_SAS_IOUNIT0_DS_TABLE_LINK                       (0x00000400)
 #define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE               (0x00000800)
+#define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS                 (0x00001000)


 typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
@@ -2336,6 +2373,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
 #define MPI_SASIOUNITPAGE1_PAGEVERSION      (0x04)

 /* values for SAS IO Unit Page 1 ControlFlags */
+#define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST        (0x8000)
 #define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX            (0x4000)
 #define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX            (0x2000)
 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE        (0x1000)
@@ -2345,9 +2383,8 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
 #define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT       (9)
 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH        (0x00)
 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT         (0x01)
-#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT        (0x10)
+#define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT        (0x02)

-#define MPI_SAS_IOUNIT1_CONTROL_AUTO_PORT_SAME_SAS_ADDR (0x0100)
 #define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED     (0x0040)
 #define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED       (0x0020)
@@ -2390,7 +2427,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
 } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
  SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;

-#define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x03)
+#define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x04)

 /* values for SAS IO Unit Page 2 Status field */
 #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
@@ -2406,6 +2443,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
 #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP       (0x02)

 #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT         (0x10)
+#define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT              (0x20)


 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3
@@ -2584,11 +2622,19 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_2
 {
    CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
    U64                                 PhysicalIdentifier;     /* 08h */
-    U32                                 Reserved1;              /* 10h */
+    U32                                 EnclosureMapping;       /* 10h */
 } CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2,
  SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t;

-#define MPI_SASDEVICE2_PAGEVERSION          (0x00)
+#define MPI_SASDEVICE2_PAGEVERSION          (0x01)
+
+/* defines for SAS Device Page 2 EnclosureMapping field */
+#define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT       (0x0000000F)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT      (0)
+#define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS           (0x000007F0)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS          (4)
+#define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX         (0x001FF800)
+#define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX        (11)


 /****************************************************************************
@@ -2598,7 +2644,8 @@ typedef struct _CONFIG_PAGE_SAS_DEVICE_2
 typedef struct _CONFIG_PAGE_SAS_PHY_0
 {
    CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
-    U32                                 Reserved1;              /* 08h */
+    U16                                 OwnerDevHandle;         /* 08h */
+    U16                                 Reserved1;              /* 0Ah */
    U64                                 SASAddress;             /* 0Ch */
    U16                                 AttachedDevHandle;      /* 14h */
    U8                                  AttachedPhyIdentifier;  /* 16h */
@@ -2607,12 +2654,12 @@ typedef struct _CONFIG_PAGE_SAS_PHY_0
    U8                                  ProgrammedLinkRate;     /* 20h */
    U8                                  HwLinkRate;             /* 21h */
    U8                                  ChangeCount;            /* 22h */
-    U8                                  Reserved3;              /* 23h */
+    U8                                  Flags;                  /* 23h */
    U32                                 PhyInfo;                /* 24h */
 } CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0,
  SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t;

-#define MPI_SASPHY0_PAGEVERSION             (0x00)
+#define MPI_SASPHY0_PAGEVERSION             (0x01)

 /* values for SAS PHY Page 0 ProgrammedLinkRate field */
 #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK                        (0xF0)
@@ -2632,6 +2679,9 @@ typedef struct _CONFIG_PAGE_SAS_PHY_0
 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5                        (0x08)
 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0                        (0x09)

+/* values for SAS PHY Page 0 Flags field */
+#define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC              (0x01)
+
 /* values for SAS PHY Page 0 PhyInfo field */
 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE                   (0x00004000)
 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR                 (0x00002000)
@@ -2690,7 +2740,7 @@ typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
 } CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0,
  SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t;

-#define MPI_SASENCLOSURE0_PAGEVERSION       (0x00)
+#define MPI_SASENCLOSURE0_PAGEVERSION       (0x01)

 /* values for SAS Enclosure Page 0 Flags field */
 #define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID       (0x0020)
@@ -2702,6 +2752,7 @@ typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO          (0x0002)
 #define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO          (0x0003)
 #define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE      (0x0004)
+#define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO           (0x0005)


 /****************************************************************************
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -6,17 +6,17 @@
 Copyright (c) 2000-2005 LSI Logic Corporation.

 ---------------------------------------
- Header Set Release Version:    01.05.09
+ Header Set Release Version:    01.05.10
 Header Set Release Date:       03-11-05
 ---------------------------------------

 Filename               Current version     Prior version
 ----------             ---------------     -------------
- mpi.h                  01.05.07            01.05.06
- mpi_ioc.h              01.05.08            01.05.07
- mpi_cnfg.h             01.05.08            01.05.07
- mpi_init.h             01.05.04            01.05.03
- mpi_targ.h             01.05.04            01.05.03
+ mpi.h                  01.05.08            01.05.07
+ mpi_ioc.h              01.05.09            01.05.08
+ mpi_cnfg.h             01.05.09            01.05.08
+ mpi_init.h             01.05.05            01.05.04
+ mpi_targ.h             01.05.05            01.05.04
 mpi_fc.h               01.05.01            01.05.01
 mpi_lan.h              01.05.01            01.05.01
 mpi_raid.h             01.05.02            01.05.02
@@ -24,7 +24,7 @@
 mpi_inb.h              01.05.01            01.05.01
 mpi_sas.h              01.05.01            01.05.01
 mpi_type.h             01.05.01            01.05.01
- mpi_history.txt        01.05.09            01.05.08
+ mpi_history.txt        01.05.09            01.05.09


 *  Date      Version   Description
@@ -88,6 +88,9 @@ mpi.h
 *  03-11-05  01.05.07  Removed function codes for SCSI IO 32 and
 *                      TargetAssistExtended requests.
 *                      Removed EEDP IOCStatus codes.
+ *  06-24-05  01.05.08  Added function codes for SCSI IO 32 and
+ *                      TargetAssistExtended requests.
+ *                      Added EEDP IOCStatus codes.
 *  --------------------------------------------------------------------------

 mpi_ioc.h
@@ -159,6 +162,8 @@ mpi_ioc.h
 *                      Reply and IOC Init Request.
 *  03-11-05  01.05.08  Added family code for 1068E family.
 *                      Removed IOCFacts Reply EEDP Capability bit.
+ *  06-24-05  01.05.09  Added 5 new IOCFacts Reply IOCCapabilities bits.
+ *                      Added Max SATA Targets to SAS Discovery Error event.
 *  --------------------------------------------------------------------------

 mpi_cnfg.h
@@ -380,6 +385,23 @@ mpi_cnfg.h
 *                      New physical mapping mode in SAS IO Unit Page 2.
 *                      Added CONFIG_PAGE_SAS_ENCLOSURE_0.
 *                      Added Slot and Enclosure fields to SAS Device Page 0.
+ *  06-24-05  01.05.09  Added EEDP defines to IOC Page 1.
+ *                      Added more RAID type defines to IOC Page 2.
+ *                      Added Port Enable Delay settings to BIOS Page 1.
+ *                      Added Bad Block Table Full define to RAID Volume Page 0.
+ *                      Added Previous State defines to RAID Physical Disk
+ *                      Page 0.
+ *                      Added Max Sata Targets define for DiscoveryStatus field
+ *                      of SAS IO Unit Page 0.
+ *                      Added Device Self Test to Control Flags of SAS IO Unit
+ *                      Page 1.
+ *                      Added Direct Attach Starting Slot Number define for SAS
+ *                      IO Unit Page 2.
+ *                      Added new fields in SAS Device Page 2 for enclosure
+ *                      mapping.
+ *                      Added OwnerDevHandle and Flags field to SAS PHY Page 0.
+ *                      Added IOC GPIO Flags define to SAS Enclosure Page 0.
+ *                      Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
 *  --------------------------------------------------------------------------

 mpi_init.h
@@ -418,6 +440,8 @@ mpi_init.h
 *                      Modified SCSI Enclosure Processor Request and Reply to
 *                      support Enclosure/Slot addressing rather than WWID
 *                      addressing.
+ *  06-24-05  01.05.05  Added SCSI IO 32 structures and defines.
+ *                      Added four new defines for SEP SlotStatus.
 *  --------------------------------------------------------------------------

 mpi_targ.h
@@ -461,6 +485,7 @@ mpi_targ.h
 *  10-05-04  01.05.02  MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
 *  02-22-05  01.05.03  Changed a comment.
 *  03-11-05  01.05.04  Removed TargetAssistExtended Request.
+ *  06-24-05  01.05.05  Added TargetAssistExtended structures and defines.
 *  --------------------------------------------------------------------------

 mpi_fc.h
@@ -571,20 +596,20 @@ mpi_type.h

 mpi_history.txt         Parts list history

-Filename    01.05.09
----------  --------
-mpi.h       01.05.07
-mpi_ioc.h   01.05.08
-mpi_cnfg.h  01.05.08
-mpi_init.h  01.05.04
-mpi_targ.h  01.05.04
-mpi_fc.h    01.05.01
-mpi_lan.h   01.05.01
-mpi_raid.h  01.05.02
-mpi_tool.h  01.05.03
-mpi_inb.h   01.05.01
-mpi_sas.h   01.05.01
-mpi_type.h  01.05.01
+Filename    01.05.10  01.05.09
+----------  --------  --------
+mpi.h       01.05.08  01.05.07
+mpi_ioc.h   01.05.09  01.05.08
+mpi_cnfg.h  01.05.09  01.05.08
+mpi_init.h  01.05.05  01.05.04
+mpi_targ.h  01.05.05  01.05.04
+mpi_fc.h    01.05.01  01.05.01
+mpi_lan.h   01.05.01  01.05.01
+mpi_raid.h  01.05.02  01.05.02
+mpi_tool.h  01.05.03  01.05.03
+mpi_inb.h   01.05.01  01.05.01
+mpi_sas.h   01.05.01  01.05.01
+mpi_type.h  01.05.01  01.05.01

 Filename    01.05.08   01.05.07   01.05.06   01.05.05   01.05.04   01.05.03
 ----------  --------   --------   --------   --------   --------   --------
--- a/drivers/message/fusion/lsi/mpi_init.h
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -6,7 +6,7 @@
 *          Title:  MPI initiator mode messages and structures
 *  Creation Date:  June 8, 2000
 *
- *    mpi_init.h Version:  01.05.04
+ *    mpi_init.h Version:  01.05.05
 *
 *  Version History
 *  ---------------
@@ -48,6 +48,8 @@
 *                      Modified SCSI Enclosure Processor Request and Reply to
 *                      support Enclosure/Slot addressing rather than WWID
 *                      addressing.
+ *  06-24-05  01.05.05  Added SCSI IO 32 structures and defines.
+ *                      Added four new defines for SEP SlotStatus.
 *  --------------------------------------------------------------------------
 */

@@ -202,6 +204,197 @@ typedef struct _MSG_SCSI_IO_REPLY
 #define MPI_SCSI_TASKTAG_UNKNOWN                (0xFFFF)


+/****************************************************************************/
+/*  SCSI IO 32 messages and associated structures                           */
+/****************************************************************************/
+
+typedef struct
+{
+    U8                      CDB[20];                    /* 00h */
+    U32                     PrimaryReferenceTag;        /* 14h */
+    U16                     PrimaryApplicationTag;      /* 18h */
+    U16                     PrimaryApplicationTagMask;  /* 1Ah */
+    U32                     TransferLength;             /* 1Ch */
+} MPI_SCSI_IO32_CDB_EEDP32, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP32,
+  MpiScsiIo32CdbEedp32_t, MPI_POINTER pMpiScsiIo32CdbEedp32_t;
+
+typedef struct
+{
+    U8                      CDB[16];                    /* 00h */
+    U32                     DataLength;                 /* 10h */
+    U32                     PrimaryReferenceTag;        /* 14h */
+    U16                     PrimaryApplicationTag;      /* 18h */
+    U16                     PrimaryApplicationTagMask;  /* 1Ah */
+    U32                     TransferLength;             /* 1Ch */
+} MPI_SCSI_IO32_CDB_EEDP16, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_EEDP16,
+  MpiScsiIo32CdbEedp16_t, MPI_POINTER pMpiScsiIo32CdbEedp16_t;
+
+typedef union
+{
+    U8                       CDB32[32];
+    MPI_SCSI_IO32_CDB_EEDP32 EEDP32;
+    MPI_SCSI_IO32_CDB_EEDP16 EEDP16;
+    SGE_SIMPLE_UNION         SGE;
+} MPI_SCSI_IO32_CDB_UNION, MPI_POINTER PTR_MPI_SCSI_IO32_CDB_UNION,
+  MpiScsiIo32Cdb_t, MPI_POINTER pMpiScsiIo32Cdb_t;
+
+typedef struct
+{
+    U8                      TargetID;           /* 00h */
+    U8                      Bus;                /* 01h */
+    U16                     Reserved1;          /* 02h */
+    U32                     Reserved2;          /* 04h */
+} MPI_SCSI_IO32_BUS_TARGET_ID_FORM, MPI_POINTER PTR_MPI_SCSI_IO32_BUS_TARGET_ID_FORM,
+  MpiScsiIo32BusTargetIdForm_t, MPI_POINTER pMpiScsiIo32BusTargetIdForm_t;
+
+typedef union
+{
+    MPI_SCSI_IO32_BUS_TARGET_ID_FORM    SCSIID;
+    U64                                 WWID;
+} MPI_SCSI_IO32_ADDRESS, MPI_POINTER PTR_MPI_SCSI_IO32_ADDRESS,
+  MpiScsiIo32Address_t, MPI_POINTER pMpiScsiIo32Address_t;
+
+typedef struct _MSG_SCSI_IO32_REQUEST
+{
+    U8                          Port;                           /* 00h */
+    U8                          Reserved1;                      /* 01h */
+    U8                          ChainOffset;                    /* 02h */
+    U8                          Function;                       /* 03h */
+    U8                          CDBLength;                      /* 04h */
+    U8                          SenseBufferLength;              /* 05h */
+    U8                          Flags;                          /* 06h */
+    U8                          MsgFlags;                       /* 07h */
+    U32                         MsgContext;                     /* 08h */
+    U8                          LUN[8];                         /* 0Ch */
+    U32                         Control;                        /* 14h */
+    MPI_SCSI_IO32_CDB_UNION     CDB;                            /* 18h */
+    U32                         DataLength;                     /* 38h */
+    U32                         BidirectionalDataLength;        /* 3Ch */
+    U32                         SecondaryReferenceTag;          /* 40h */
+    U16                         SecondaryApplicationTag;        /* 44h */
+    U16                         Reserved2;                      /* 46h */
+    U16                         EEDPFlags;                      /* 48h */
+    U16                         ApplicationTagTranslationMask;  /* 4Ah */
+    U32                         EEDPBlockSize;                  /* 4Ch */
+    MPI_SCSI_IO32_ADDRESS       DeviceAddress;                  /* 50h */
+    U8                          SGLOffset0;                     /* 58h */
+    U8                          SGLOffset1;                     /* 59h */
+    U8                          SGLOffset2;                     /* 5Ah */
+    U8                          SGLOffset3;                     /* 5Bh */
+    U32                         Reserved3;                      /* 5Ch */
+    U32                         Reserved4;                      /* 60h */
+    U32                         SenseBufferLowAddr;             /* 64h */
+    SGE_IO_UNION                SGL;                            /* 68h */
+} MSG_SCSI_IO32_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO32_REQUEST,
+  SCSIIO32Request_t, MPI_POINTER pSCSIIO32Request_t;
+
+/* SCSI IO 32 MsgFlags bits */
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH                (0x01)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_32             (0x00)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_WIDTH_64             (0x01)
+
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOCATION             (0x02)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_HOST             (0x00)
+#define MPI_SCSIIO32_MSGFLGS_SENSE_LOC_IOC              (0x02)
+
+#define MPI_SCSIIO32_MSGFLGS_CMD_DETERMINES_DATA_DIR    (0x04)
+#define MPI_SCSIIO32_MSGFLGS_SGL_OFFSETS_CHAINS         (0x08)
+#define MPI_SCSIIO32_MSGFLGS_MULTICAST                  (0x10)
+#define MPI_SCSIIO32_MSGFLGS_BIDIRECTIONAL              (0x20)
+#define MPI_SCSIIO32_MSGFLGS_LARGE_CDB                  (0x40)
+
+/* SCSI IO 32 Flags bits */
+#define MPI_SCSIIO32_FLAGS_FORM_MASK                    (0x03)
+#define MPI_SCSIIO32_FLAGS_FORM_SCSIID                  (0x00)
+#define MPI_SCSIIO32_FLAGS_FORM_WWID                    (0x01)
+
+/* SCSI IO 32 LUN fields */
+#define MPI_SCSIIO32_LUN_FIRST_LEVEL_ADDRESSING     (0x0000FFFF)
+#define MPI_SCSIIO32_LUN_SECOND_LEVEL_ADDRESSING    (0xFFFF0000)
+#define MPI_SCSIIO32_LUN_THIRD_LEVEL_ADDRESSING     (0x0000FFFF)
+#define MPI_SCSIIO32_LUN_FOURTH_LEVEL_ADDRESSING    (0xFFFF0000)
+#define MPI_SCSIIO32_LUN_LEVEL_1_WORD               (0xFF00)
+#define MPI_SCSIIO32_LUN_LEVEL_1_DWORD              (0x0000FF00)
+
+/* SCSI IO 32 Control bits */
+#define MPI_SCSIIO32_CONTROL_DATADIRECTION_MASK     (0x03000000)
+#define MPI_SCSIIO32_CONTROL_NODATATRANSFER         (0x00000000)
+#define MPI_SCSIIO32_CONTROL_WRITE                  (0x01000000)
+#define MPI_SCSIIO32_CONTROL_READ                   (0x02000000)
+#define MPI_SCSIIO32_CONTROL_BIDIRECTIONAL          (0x03000000)
+
+#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_MASK         (0xFC000000)
+#define MPI_SCSIIO32_CONTROL_ADDCDBLEN_SHIFT        (26)
+
+#define MPI_SCSIIO32_CONTROL_TASKATTRIBUTE_MASK     (0x00000700)
+#define MPI_SCSIIO32_CONTROL_SIMPLEQ                (0x00000000)
+#define MPI_SCSIIO32_CONTROL_HEADOFQ                (0x00000100)
+#define MPI_SCSIIO32_CONTROL_ORDEREDQ               (0x00000200)
+#define MPI_SCSIIO32_CONTROL_ACAQ                   (0x00000400)
+#define MPI_SCSIIO32_CONTROL_UNTAGGED               (0x00000500)
+#define MPI_SCSIIO32_CONTROL_NO_DISCONNECT          (0x00000700)
+
+#define MPI_SCSIIO32_CONTROL_TASKMANAGE_MASK        (0x00FF0000)
+#define MPI_SCSIIO32_CONTROL_OBSOLETE               (0x00800000)
+#define MPI_SCSIIO32_CONTROL_CLEAR_ACA_RSV          (0x00400000)
+#define MPI_SCSIIO32_CONTROL_TARGET_RESET           (0x00200000)
+#define MPI_SCSIIO32_CONTROL_LUN_RESET_RSV          (0x00100000)
+#define MPI_SCSIIO32_CONTROL_RESERVED               (0x00080000)
+#define MPI_SCSIIO32_CONTROL_CLR_TASK_SET_RSV       (0x00040000)
+#define MPI_SCSIIO32_CONTROL_ABORT_TASK_SET         (0x00020000)
+#define MPI_SCSIIO32_CONTROL_RESERVED2              (0x00010000)
+
+/* SCSI IO 32 EEDPFlags */
+#define MPI_SCSIIO32_EEDPFLAGS_MASK_OP              (0x0007)
+#define MPI_SCSIIO32_EEDPFLAGS_NOOP_OP              (0x0000)
+#define MPI_SCSIIO32_EEDPFLAGS_CHK_OP               (0x0001)
+#define MPI_SCSIIO32_EEDPFLAGS_STRIP_OP             (0x0002)
+#define MPI_SCSIIO32_EEDPFLAGS_CHKRM_OP             (0x0003)
+#define MPI_SCSIIO32_EEDPFLAGS_INSERT_OP            (0x0004)
+#define MPI_SCSIIO32_EEDPFLAGS_REPLACE_OP           (0x0006)
+#define MPI_SCSIIO32_EEDPFLAGS_CHKREGEN_OP          (0x0007)
+
+#define MPI_SCSIIO32_EEDPFLAGS_PASS_REF_TAG         (0x0008)
+#define MPI_SCSIIO32_EEDPFLAGS_8_9THS_MODE          (0x0010)
+
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_MASK         (0x0700)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_GUARD        (0x0100)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_REFTAG       (0x0200)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_LBATAG       (0x0400)
+#define MPI_SCSIIO32_EEDPFLAGS_T10_CHK_SHIFT        (8)
+
+#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_APPTAG       (0x1000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_APPTAG       (0x2000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_SEC_REFTAG       (0x4000)
+#define MPI_SCSIIO32_EEDPFLAGS_INC_PRI_REFTAG       (0x8000)
+
+
+/* SCSIIO32 IO reply structure */
+typedef struct _MSG_SCSIIO32_IO_REPLY
+{
+    U8                      Port;                       /* 00h */
+    U8                      Reserved1;                  /* 01h */
+    U8                      MsgLength;                  /* 02h */
+    U8                      Function;                   /* 03h */
+    U8                      CDBLength;                  /* 04h */
+    U8                      SenseBufferLength;          /* 05h */
+    U8                      Flags;                      /* 06h */
+    U8                      MsgFlags;                   /* 07h */
+    U32                     MsgContext;                 /* 08h */
+    U8                      SCSIStatus;                 /* 0Ch */
+    U8                      SCSIState;                  /* 0Dh */
+    U16                     IOCStatus;                  /* 0Eh */
+    U32                     IOCLogInfo;                 /* 10h */
+    U32                     TransferCount;              /* 14h */
+    U32                     SenseCount;                 /* 18h */
+    U32                     ResponseInfo;               /* 1Ch */
+    U16                     TaskTag;                    /* 20h */
+    U16                     Reserved2;                  /* 22h */
+    U32                     BidirectionalTransferCount; /* 24h */
+} MSG_SCSIIO32_IO_REPLY, MPI_POINTER PTR_MSG_SCSIIO32_IO_REPLY,
+  SCSIIO32Reply_t, MPI_POINTER pSCSIIO32Reply_t;
+
+
 /****************************************************************************/
 /*  SCSI Task Management messages                                           */
 /****************************************************************************/
@@ -310,10 +503,14 @@ typedef struct _MSG_SEP_REQUEST
 #define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED             (0x00000080)
 #define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE                (0x00000100)
 #define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED          (0x00000200)
+#define MPI_SEP_REQ_SLOTSTATUS_REQ_CONSISTENCY_CHECK    (0x00001000)
+#define MPI_SEP_REQ_SLOTSTATUS_DISABLE                  (0x00002000)
+#define MPI_SEP_REQ_SLOTSTATUS_REQ_RESERVED_DEVICE      (0x00004000)
 #define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST         (0x00020000)
 #define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE           (0x00040000)
 #define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT           (0x00080000)
 #define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE              (0x00400000)
+#define MPI_SEP_REQ_SLOTSTATUS_ACTIVE                   (0x00800000)
 #define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS          (0x04000000)
 #define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS          (0x08000000)
 #define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF                  (0x10000000)
@@ -352,11 +549,15 @@ typedef struct _MSG_SEP_REPLY
 #define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED           (0x00000080)
 #define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE              (0x00000100)
 #define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED        (0x00000200)
+#define MPI_SEP_REPLY_SLOTSTATUS_CONSISTENCY_CHECK      (0x00001000)
+#define MPI_SEP_REPLY_SLOTSTATUS_DISABLE                (0x00002000)
+#define MPI_SEP_REPLY_SLOTSTATUS_RESERVED_DEVICE        (0x00004000)
 #define MPI_SEP_REPLY_SLOTSTATUS_REPORT                 (0x00010000)
 #define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST       (0x00020000)
 #define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY           (0x00040000)
 #define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY           (0x00080000)
 #define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE          (0x00400000)
+#define MPI_SEP_REPLY_SLOTSTATUS_ACTIVE                 (0x00800000)
 #define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED       (0x01000000)
 #define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED       (0x02000000)
 #define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS        (0x04000000)
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -6,7 +6,7 @@
 *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
 *  Creation Date:  August 11, 2000
 *
- *    mpi_ioc.h Version:  01.05.08
+ *    mpi_ioc.h Version:  01.05.09
 *
 *  Version History
 *  ---------------
@@ -81,6 +81,8 @@
 *                      Reply and IOC Init Request.
 *  03-11-05  01.05.08  Added family code for 1068E family.
 *                      Removed IOCFacts Reply EEDP Capability bit.
+ *  06-24-05  01.05.09  Added 5 new IOCFacts Reply IOCCapabilities bits.
+ *                      Added Max SATA Targets to SAS Discovery Error event.
 *  --------------------------------------------------------------------------
 */

@@ -261,7 +263,11 @@ typedef struct _MSG_IOC_FACTS_REPLY
 #define MPI_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER       (0x00000008)
 #define MPI_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER         (0x00000010)
 #define MPI_IOCFACTS_CAPABILITY_EXTENDED_BUFFER         (0x00000020)
-
+#define MPI_IOCFACTS_CAPABILITY_EEDP                    (0x00000040)
+#define MPI_IOCFACTS_CAPABILITY_BIDIRECTIONAL           (0x00000080)
+#define MPI_IOCFACTS_CAPABILITY_MULTICAST               (0x00000100)
+#define MPI_IOCFACTS_CAPABILITY_SCSIIO32                (0x00000200)
+#define MPI_IOCFACTS_CAPABILITY_NO_SCSIIO16             (0x00000400)


 /*****************************************************************************
@@ -677,6 +683,7 @@ typedef struct _EVENT_DATA_DISCOVERY_ERROR
 #define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_SUBTRACTIVE          (0x00000200)
 #define MPI_EVENT_DSCVRY_ERR_DS_TABLE_TO_TABLE              (0x00000400)
 #define MPI_EVENT_DSCVRY_ERR_DS_MULTPL_PATHS                (0x00000800)
+#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS            (0x00001000)


 /*****************************************************************************
--- a/drivers/message/fusion/lsi/mpi_targ.h
+++ b/drivers/message/fusion/lsi/mpi_targ.h
@@ -6,7 +6,7 @@
 *          Title:  MPI Target mode messages and structures
 *  Creation Date:  June 22, 2000
 *
- *    mpi_targ.h Version:  01.05.04
+ *    mpi_targ.h Version:  01.05.05
 *
 *  Version History
 *  ---------------
@@ -53,6 +53,7 @@
 *  10-05-04  01.05.02  MSG_TARGET_CMD_BUFFER_POST_BASE_LIST_REPLY added.
 *  02-22-05  01.05.03  Changed a comment.
 *  03-11-05  01.05.04  Removed TargetAssistExtended Request.
+ *  06-24-05  01.05.05  Added TargetAssistExtended structures and defines.
 *  --------------------------------------------------------------------------
 */

@@ -370,6 +371,77 @@ typedef struct _MSG_TARGET_ERROR_REPLY
  TargetErrorReply_t, MPI_POINTER pTargetErrorReply_t;


+/****************************************************************************/
+/* Target Assist Extended Request                                           */
+/****************************************************************************/
+
+typedef struct _MSG_TARGET_ASSIST_EXT_REQUEST
+{
+    U8                      StatusCode;                     /* 00h */
+    U8                      TargetAssistFlags;              /* 01h */
+    U8                      ChainOffset;                    /* 02h */
+    U8                      Function;                       /* 03h */
+    U16                     QueueTag;                       /* 04h */
+    U8                      Reserved1;                      /* 06h */
+    U8                      MsgFlags;                       /* 07h */
+    U32                     MsgContext;                     /* 08h */
+    U32                     ReplyWord;                      /* 0Ch */
+    U8                      LUN[8];                         /* 10h */
+    U32                     RelativeOffset;                 /* 18h */
+    U32                     Reserved2;                      /* 1Ch */
+    U32                     Reserved3;                      /* 20h */
+    U32                     PrimaryReferenceTag;            /* 24h */
+    U16                     PrimaryApplicationTag;          /* 28h */
+    U16                     PrimaryApplicationTagMask;      /* 2Ah */
+    U32                     Reserved4;                      /* 2Ch */
+    U32                     DataLength;                     /* 30h */
+    U32                     BidirectionalDataLength;        /* 34h */
+    U32                     SecondaryReferenceTag;          /* 38h */
+    U16                     SecondaryApplicationTag;        /* 3Ch */
+    U16                     Reserved5;                      /* 3Eh */
+    U16                     EEDPFlags;                      /* 40h */
+    U16                     ApplicationTagTranslationMask;  /* 42h */
+    U32                     EEDPBlockSize;                  /* 44h */
+    U8                      SGLOffset0;                     /* 48h */
+    U8                      SGLOffset1;                     /* 49h */
+    U8                      SGLOffset2;                     /* 4Ah */
+    U8                      SGLOffset3;                     /* 4Bh */
+    U32                     Reserved6;                      /* 4Ch */
+    SGE_IO_UNION            SGL[1];                         /* 50h */
+} MSG_TARGET_ASSIST_EXT_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_EXT_REQUEST,
+  TargetAssistExtRequest_t, MPI_POINTER pTargetAssistExtRequest_t;
+
+/* see the defines after MSG_TARGET_ASSIST_REQUEST for TargetAssistFlags */
+
+/* defines for the MsgFlags field */
+#define TARGET_ASSIST_EXT_MSGFLAGS_BIDIRECTIONAL        (0x20)
+#define TARGET_ASSIST_EXT_MSGFLAGS_MULTICAST            (0x10)
+#define TARGET_ASSIST_EXT_MSGFLAGS_SGL_OFFSET_CHAINS    (0x08)
+
+/* defines for the EEDPFlags field */
+#define TARGET_ASSIST_EXT_EEDP_MASK_OP          (0x0007)
+#define TARGET_ASSIST_EXT_EEDP_NOOP_OP          (0x0000)
+#define TARGET_ASSIST_EXT_EEDP_CHK_OP           (0x0001)
+#define TARGET_ASSIST_EXT_EEDP_STRIP_OP         (0x0002)
+#define TARGET_ASSIST_EXT_EEDP_CHKRM_OP         (0x0003)
+#define TARGET_ASSIST_EXT_EEDP_INSERT_OP        (0x0004)
+#define TARGET_ASSIST_EXT_EEDP_REPLACE_OP       (0x0006)
+#define TARGET_ASSIST_EXT_EEDP_CHKREGEN_OP      (0x0007)
+
+#define TARGET_ASSIST_EXT_EEDP_PASS_REF_TAG     (0x0008)
+
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_MASK     (0x0700)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_GUARD    (0x0100)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_APPTAG   (0x0200)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_REFTAG   (0x0400)
+#define TARGET_ASSIST_EXT_EEDP_T10_CHK_SHIFT    (8)
+
+#define TARGET_ASSIST_EXT_EEDP_INC_SEC_APPTAG   (0x1000)
+#define TARGET_ASSIST_EXT_EEDP_INC_PRI_APPTAG   (0x2000)
+#define TARGET_ASSIST_EXT_EEDP_INC_SEC_REFTAG   (0x4000)
+#define TARGET_ASSIST_EXT_EEDP_INC_PRI_REFTAG   (0x8000)
+
+
 /****************************************************************************/
 /* Target Status Send Request                                               */
 /****************************************************************************/
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -218,8 +218,7 @@ pci_enable_io_access(struct pci_dev *pdev)
 *	(also referred to as a IO Controller or IOC).
 *	This routine must clear the interrupt from the adapter and does
 *	so by reading the reply FIFO.  Multiple replies may be processed
- *	per single call to this routine; up to MPT_MAX_REPLIES_PER_ISR
- *	which is currently set to 32 in mptbase.h.
+ *	per single call to this routine.
 *
 *	This routine handles register-level access of the adapter but
 *	dispatches (calls) a protocol-specific callback routine to handle
@@ -279,11 +278,11 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
 			cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
 			mf = MPT_INDEX_2_MFPTR(ioc, req_idx);

-			dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x\n",
-					ioc->name, mr, req_idx));
+			dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
+					ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
 			DBG_DUMP_REPLY_FRAME(mr)

-			/*  Check/log IOC log info
+			 /*  Check/log IOC log info
 			 */
 			ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
 			if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
@@ -345,7 +344,7 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
 			if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))
 				|| (mf < ioc->req_frames)) ) {
 				printk(MYIOC_s_WARN_FMT
-					"mpt_interrupt: Invalid mf (%p) req_idx (%d)!\n", ioc->name, (void *)mf, req_idx);
+					"mpt_interrupt: Invalid mf (%p)!\n", ioc->name, (void *)mf);
 				cb_idx = 0;
 				pa = 0;
 				freeme = 0;
@@ -399,7 +398,7 @@ mpt_interrupt(int irq, void *bus_id, struct pt_regs *r)
 *	@mf: Pointer to original MPT request frame
 *	@reply: Pointer to MPT reply frame (NULL if TurboReply)
 *
-	*	Returns 1 indicating original alloc'd request frame ptr
+ *	Returns 1 indicating original alloc'd request frame ptr
 *	should be freed, or 0 if it shouldn't.
 */
 static int
@@ -408,28 +407,17 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
 	int freereq = 1;
 	u8 func;

-	dprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));
-
-	if ((mf == NULL) ||
-	    (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
-		printk(MYIOC_s_ERR_FMT "NULL or BAD request frame ptr! (=%p)\n",
-				ioc->name, (void *)mf);
-		return 1;
-	}
-
-	if (reply == NULL) {
-		dprintk((MYIOC_s_ERR_FMT "Unexpected NULL Event (turbo?) reply!\n",
-				ioc->name));
-		return 1;
-	}
+	dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply() called\n", ioc->name));

+#if defined(MPT_DEBUG_MSG_FRAME)
 	if (!(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
 		dmfprintk((KERN_INFO MYNAM ": Original request frame (@%p) header\n", mf));
 		DBG_DUMP_REQUEST_FRAME_HDR(mf)
 	}
+#endif

 	func = reply->u.hdr.Function;
-	dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
+	dmfprintk((MYIOC_s_INFO_FMT "mpt_base_reply, Function=%02Xh\n",
 			ioc->name, func));

 	if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
@@ -448,8 +436,14 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
 		 *	Hmmm...  It seems that EventNotificationReply is an exception
 		 *	to the rule of one reply per request.
 		 */
-		if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
+		if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
 			freereq = 0;
+			devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
+				ioc->name, pEvReply));
+		} else {
+			devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
+				ioc->name, pEvReply));
+		}

 #ifdef CONFIG_PROC_FS
 //		LogEvent(ioc, pEvReply);
@@ -491,10 +485,21 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)

 				pCfg->status = status;
 				if (status == MPI_IOCSTATUS_SUCCESS) {
-					pCfg->hdr->PageVersion = pReply->Header.PageVersion;
-					pCfg->hdr->PageLength = pReply->Header.PageLength;
-					pCfg->hdr->PageNumber = pReply->Header.PageNumber;
-					pCfg->hdr->PageType = pReply->Header.PageType;
+					if ((pReply->Header.PageType &
+					    MPI_CONFIG_PAGETYPE_MASK) ==
+					    MPI_CONFIG_PAGETYPE_EXTENDED) {
+						pCfg->cfghdr.ehdr->ExtPageLength =
+						    le16_to_cpu(pReply->ExtPageLength);
+						pCfg->cfghdr.ehdr->ExtPageType =
+						    pReply->ExtPageType;
+					}
+					pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
+
+					/* If this is a regular header, save PageLength. */
+					/* LMP Do this better so not using a reserved field! */
+					pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
+					pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
+					pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
 				}
 			}

@@ -705,7 +710,7 @@ mpt_device_driver_deregister(int cb_idx)
 		if (dd_cbfunc->remove)
 			dd_cbfunc->remove(ioc->pcidev);
 	}
-	
+
 	MptDeviceDriverHandlers[cb_idx] = NULL;
 }

@@ -818,7 +823,7 @@ mpt_put_msg_frame(int handle, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
 	}
 #endif

-	mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];  
+	mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
 	dsgprintk((MYIOC_s_INFO_FMT "mf_dma_addr=%x req_idx=%d RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx, ioc->RequestNB[req_idx]));
 	CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
 }
@@ -920,7 +925,7 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req,

 	/* Make sure there are no doorbells */
 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-	
+
 	CHIPREG_WRITE32(&ioc->chip->Doorbell,
 			((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
 			 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
@@ -935,14 +940,14 @@ mpt_send_handshake_request(int handle, MPT_ADAPTER *ioc, int reqBytes, u32 *req,
 		return -5;

 	dhsprintk((KERN_INFO MYNAM ": %s: mpt_send_handshake_request start, WaitCnt=%d\n",
-			ioc->name, ii));
+		ioc->name, ii));

 	CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);

 	if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
 		return -2;
 	}
-		
+
 	/* Send request via doorbell handshake */
 	req_as_bytes = (u8 *) req;
 	for (ii = 0; ii < reqBytes/4; ii++) {
@@ -988,9 +993,9 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
 		if (ioc->id == iocid) {
 			*iocpp =ioc;
 			return iocid;
-		} 
+		}
 	}
-	
+
 	*iocpp = NULL;
 	return -1;
 }
@@ -1032,9 +1037,9 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)

 	if (pci_enable_device(pdev))
 		return r;
-	
+
 	dinitprintk((KERN_WARNING MYNAM ": mpt_adapter_install\n"));
-	
+
 	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		dprintk((KERN_INFO MYNAM
 			": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n"));
@@ -1059,7 +1064,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->alloc_total = sizeof(MPT_ADAPTER);
 	ioc->req_sz = MPT_DEFAULT_FRAME_SIZE;		/* avoid div by zero! */
 	ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
-	
+
 	ioc->pcidev = pdev;
 	ioc->diagPending = 0;
 	spin_lock_init(&ioc->diagLock);
@@ -1088,7 +1093,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* Find lookup slot. */
 	INIT_LIST_HEAD(&ioc->list);
 	ioc->id = mpt_ids++;
-	
+
 	mem_phys = msize = 0;
 	port = psize = 0;
 	for (ii=0; ii < DEVICE_COUNT_RESOURCE; ii++) {
@@ -1143,7 +1148,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 		ioc->prod_name = "LSIFC909";
 		ioc->bus_type = FC;
 	}
-	if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
+	else if (pdev->device == MPI_MANUFACTPAGE_DEVICEID_FC929) {
 		ioc->prod_name = "LSIFC929";
 		ioc->bus_type = FC;
 	}
@@ -1322,7 +1327,7 @@ mpt_detach(struct pci_dev *pdev)
 	remove_proc_entry(pname, NULL);
 	sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
 	remove_proc_entry(pname, NULL);
-	
+
 	/* call per device driver remove entry point */
 	for(ii=0; ii<MPT_MAX_PROTOCOL_DRIVERS; ii++) {
 		if(MptDeviceDriverHandlers[ii] &&
@@ -1330,7 +1335,7 @@ mpt_detach(struct pci_dev *pdev)
 			MptDeviceDriverHandlers[ii]->remove(pdev);
 		}
 	}
-	
+
 	/* Disable interrupts! */
 	CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);

@@ -1403,7 +1408,7 @@ mpt_resume(struct pci_dev *pdev)
 	u32 device_state = pdev->current_state;
 	int recovery_state;
 	int ii;
-	
+
 	printk(MYIOC_s_INFO_FMT
 	"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
 		ioc->name, pdev, pci_name(pdev), device_state);
@@ -1534,7 +1539,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 		if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
 			break;
 	}
-	
+

 	if (ii == 5) {
 		dinitprintk((MYIOC_s_INFO_FMT "Retry IocFacts failed rc=%x\n", ioc->name, rc));
@@ -1542,7 +1547,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 	} else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
 		MptDisplayIocCapabilities(ioc);
 	}
-	
+
 	if (alt_ioc_ready) {
 		if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
 			dinitprintk((MYIOC_s_INFO_FMT "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
@@ -1613,7 +1618,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)

 	if (reset_alt_ioc_active && ioc->alt_ioc) {
 		/* (re)Enable alt-IOC! (reply interrupt) */
-		dprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
+		dinitprintk((KERN_INFO MYNAM ": alt-%s reply irq re-enabled\n",
 				ioc->alt_ioc->name));
 		CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, ~(MPI_HIM_RIM));
 		ioc->alt_ioc->active = 1;
@@ -1670,7 +1675,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)

 			/* Find IM volumes
 			 */
-			if (ioc->facts.MsgVersion >= 0x0102)
+			if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
 				mpt_findImVolumes(ioc);

 			/* Check, and possibly reset, the coalescing value
@@ -1700,7 +1705,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			}

 			if (alt_ioc_ready && MptResetHandlers[ii]) {
-				dprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
+				drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
 						ioc->name, ioc->alt_ioc->name, ii));
 				rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
 				handlers++;
@@ -1733,8 +1738,8 @@ mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)

 	dprintk((MYIOC_s_INFO_FMT "PCI device %s devfn=%x/%x,"
 	    " searching for devfn match on %x or %x\n",
-		ioc->name, pci_name(pdev), pdev->devfn,
-		func-1, func+1));
+		ioc->name, pci_name(pdev), pdev->bus->number,
+		pdev->devfn, func-1, func+1));

 	peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
 	if (!peer) {
@@ -1861,36 +1866,39 @@ mpt_adapter_disable(MPT_ADAPTER *ioc)
 static void
 mpt_adapter_dispose(MPT_ADAPTER *ioc)
 {
-	if (ioc != NULL) {
-		int sz_first, sz_last;
+	int sz_first, sz_last;

-		sz_first = ioc->alloc_total;
+	if (ioc == NULL)
+		return;

-		mpt_adapter_disable(ioc);
+	sz_first = ioc->alloc_total;

-		if (ioc->pci_irq != -1) {
-			free_irq(ioc->pci_irq, ioc);
-			ioc->pci_irq = -1;
-		}
+	mpt_adapter_disable(ioc);

-		if (ioc->memmap != NULL)
-			iounmap(ioc->memmap);
+	if (ioc->pci_irq != -1) {
+		free_irq(ioc->pci_irq, ioc);
+		ioc->pci_irq = -1;
+	}
+
+	if (ioc->memmap != NULL) {
+		iounmap(ioc->memmap);
+		ioc->memmap = NULL;
+	}

 #if defined(CONFIG_MTRR) && 0
-		if (ioc->mtrr_reg > 0) {
-			mtrr_del(ioc->mtrr_reg, 0, 0);
-			dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
-		}
+	if (ioc->mtrr_reg > 0) {
+		mtrr_del(ioc->mtrr_reg, 0, 0);
+		dprintk((KERN_INFO MYNAM ": %s: MTRR region de-registered\n", ioc->name));
+	}
 #endif

-		/*  Zap the adapter lookup ptr!  */
-		list_del(&ioc->list);
+	/*  Zap the adapter lookup ptr!  */
+	list_del(&ioc->list);

-		sz_last = ioc->alloc_total;
-		dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
-				ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
-		kfree(ioc);
-	}
+	sz_last = ioc->alloc_total;
+	dprintk((KERN_INFO MYNAM ": %s: free'd %d of %d bytes\n",
+			ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
+	kfree(ioc);
 }

 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1977,7 +1985,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 	}

 	/* Is it already READY? */
-	if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY) 
+	if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
 		return 0;

 	/*
@@ -1995,7 +2003,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 	 *	Hmmm...  Did it get left operational?
 	 */
 	if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
-		dinitprintk((MYIOC_s_WARN_FMT "IOC operational unexpected\n",
+		dinitprintk((MYIOC_s_INFO_FMT "IOC operational unexpected\n",
 				ioc->name));

 		/* Check WhoInit.
@@ -2004,8 +2012,8 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
 		 * Else, fall through to KickStart case
 		 */
 		whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
-		dprintk((KERN_WARNING MYNAM
-			": whoinit 0x%x\n statefault %d force %d\n",
+		dinitprintk((KERN_INFO MYNAM
+			": whoinit 0x%x statefault %d force %d\n",
 			whoinit, statefault, force));
 		if (whoinit == MPI_WHOINIT_PCI_PEER)
 			return -4;
@@ -2140,8 +2148,8 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 	get_facts.Function = MPI_FUNCTION_IOC_FACTS;
 	/* Assert: All other get_facts fields are zero! */

-	dinitprintk((MYIOC_s_INFO_FMT 
-	    "Sending get IocFacts request req_sz=%d reply_sz=%d\n", 
+	dinitprintk((MYIOC_s_INFO_FMT
+	    "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
 	    ioc->name, req_sz, reply_sz));

 	/* No non-zero fields in the get_facts request are greater than
@@ -2174,7 +2182,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 		facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
 		facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
 		facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
-		status = facts->IOCStatus & MPI_IOCSTATUS_MASK;
+		status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
 		/* CHECKME! IOCStatus, IOCLogInfo */

 		facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
@@ -2221,7 +2229,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 		if ( sz & 0x02 )
 			sz += 2;
 		facts->FWImageSize = sz;
-		
+
 		if (!facts->RequestFrameSize) {
 			/*  Something is wrong!  */
 			printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
@@ -2240,7 +2248,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 		ioc->NBShiftFactor  = shiftFactor;
 		dinitprintk((MYIOC_s_INFO_FMT "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
 					ioc->name, vv, shiftFactor, r));
-    
+
 		if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
 			/*
 			 * Set values for this IOC's request & reply frame sizes,
@@ -2261,7 +2269,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
 				return r;
 		}
 	} else {
-		printk(MYIOC_s_ERR_FMT 
+		printk(MYIOC_s_ERR_FMT
 		     "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
 		     ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
 		     RequestFrameSize)/sizeof(u32)));
@@ -2413,9 +2421,11 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)

 	dhsprintk((MYIOC_s_INFO_FMT "Sending PortEnable (req @ %p)\n",
 			ioc->name, &ioc_init));
-	
-	if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0)
+
+	if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
+		printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
 		return r;
+	}

 	/* YIKES!  SUPER IMPORTANT!!!
 	 *  Poll IocState until _OPERATIONAL while IOC is doing
@@ -2440,7 +2450,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
 		state = mpt_GetIocState(ioc, 1);
 		count++;
 	}
-	dhsprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
+	dinitprintk((MYIOC_s_INFO_FMT "INFO - Wait IOC_OPERATIONAL state (cnt=%d)\n",
 			ioc->name, count));

 	return r;
@@ -2529,7 +2539,7 @@ mpt_free_fw_memory(MPT_ADAPTER *ioc)
 	int sz;

 	sz = ioc->facts.FWImageSize;
-	dinitprintk((KERN_WARNING MYNAM "free_fw_memory: FW Image  @ %p[%p], sz=%d[%x] bytes\n",
+	dinitprintk((KERN_INFO MYNAM "free_fw_memory: FW Image  @ %p[%p], sz=%d[%x] bytes\n",
 		 ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
 	pci_free_consistent(ioc->pcidev, sz,
 			ioc->cached_fw, ioc->cached_fw_dma);
@@ -2573,9 +2583,9 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)

 	mpt_alloc_fw_memory(ioc, sz);

-	dinitprintk((KERN_WARNING MYNAM ": FW Image  @ %p[%p], sz=%d[%x] bytes\n",
+	dinitprintk((KERN_INFO MYNAM ": FW Image  @ %p[%p], sz=%d[%x] bytes\n",
 		 ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
-	
+
 	if (ioc->cached_fw == NULL) {
 		/* Major Failure.
 		 */
@@ -2605,14 +2615,14 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
 	mpt_add_sge(&request[sgeoffset], flagsLength, ioc->cached_fw_dma);

 	sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
-	dinitprintk((KERN_WARNING MYNAM "Sending FW Upload (req @ %p) sgeoffset=%d \n",
+	dinitprintk((KERN_INFO MYNAM ": Sending FW Upload (req @ %p) sgeoffset=%d \n",
 			prequest, sgeoffset));
 	DBG_DUMP_FW_REQUEST_FRAME(prequest)

 	ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
 				reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);

-	dinitprintk((KERN_WARNING MYNAM "FW Upload completed rc=%x \n", ii));
+	dinitprintk((KERN_INFO MYNAM ": FW Upload completed rc=%x \n", ii));

 	cmdStatus = -EFAULT;
 	if (ii == 0) {
@@ -2627,10 +2637,10 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
 				cmdStatus = 0;
 		}
 	}
-	dinitprintk((MYIOC_s_INFO_FMT ": do_upload status %d \n",
+	dinitprintk((MYIOC_s_INFO_FMT ": do_upload cmdStatus=%d \n",
 			ioc->name, cmdStatus));

-	
+
 	if (cmdStatus) {

 		ddlprintk((MYIOC_s_INFO_FMT ": fw upload failed, freeing image \n",
@@ -2761,8 +2771,8 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag)
 		fwSize = (pExtImage->ImageSize + 3) >> 2;
 		ptrFw = (u32 *)pExtImage;

-		ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x bytes @ %p load_addr=%x\n",
-						ioc->name, fwSize*4, ptrFw, load_addr));
+		ddlprintk((MYIOC_s_INFO_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
+						ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
 		CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);

 		while (fwSize--) {
@@ -2845,9 +2855,9 @@ mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag)
 *			  0 else
 *
 *	Returns:
- *		 1 - hard reset, READY	
- *		 0 - no reset due to History bit, READY	
- *		-1 - no reset due to History bit but not READY	
+ *		 1 - hard reset, READY
+ *		 0 - no reset due to History bit, READY
+ *		-1 - no reset due to History bit but not READY
 *		     OR reset but failed to come READY
 *		-2 - no reset, could not enter DIAG mode
 *		-3 - reset but bad FW bit
@@ -2990,7 +3000,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 		 *
 		 */
 		CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
-		mdelay (1);
+		mdelay(1);

 		/*
 		 * Now hit the reset bit in the Diagnostic register
@@ -3170,7 +3180,7 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
 	u32 state;
 	int cntdn, count;

-	drsprintk((KERN_WARNING MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
+	drsprintk((KERN_INFO MYNAM ": %s: Sending IOC reset(0x%02x)!\n",
 			ioc->name, reset_type));
 	CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
 	if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
@@ -3374,6 +3384,9 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 		ioc->reply_frames = (MPT_FRAME_HDR *) mem;
 		ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);

+		dinitprintk((KERN_INFO MYNAM ": %s ReplyBuffers @ %p[%p]\n",
+	 		ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
+
 		alloc_dma += reply_sz;
 		mem += reply_sz;

@@ -3382,7 +3395,7 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 		ioc->req_frames = (MPT_FRAME_HDR *) mem;
 		ioc->req_frames_dma = alloc_dma;

-		dinitprintk((KERN_INFO MYNAM ": %s.RequestBuffers @ %p[%p]\n",
+		dinitprintk((KERN_INFO MYNAM ": %s RequestBuffers @ %p[%p]\n",
 			 	ioc->name, mem, (void *)(ulong)alloc_dma));

 		ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
@@ -3408,7 +3421,7 @@ PrimeIocFifos(MPT_ADAPTER *ioc)
 		ioc->ChainBuffer = mem;
 		ioc->ChainBufferDMA = alloc_dma;

-		dinitprintk((KERN_INFO MYNAM " :%s.ChainBuffers @ %p(%p)\n",
+		dinitprintk((KERN_INFO MYNAM " :%s ChainBuffers @ %p(%p)\n",
 			ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));

 		/* Initialize the free chain Q.
@@ -3513,7 +3526,7 @@ out_fail:
 */
 static int
 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
-				int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
+		int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
 {
 	MPIDefaultReply_t *mptReply;
 	int failcnt = 0;
@@ -3588,7 +3601,7 @@ mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
 		 */
 		if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
 			failcnt++;
-		
+
 		dhsprintk((MYIOC_s_INFO_FMT "HandShake reply count=%d%s\n",
 				ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));

@@ -3747,7 +3760,7 @@ WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
 	}

 	dhsprintk((MYIOC_s_INFO_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
-			ioc->name, t, le32_to_cpu(*(u32 *)hs_reply), 
+			ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
 			failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));

 	/*
@@ -3819,7 +3832,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc)
 	hdr.PageLength = 0;
 	hdr.PageNumber = 0;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
-	cfg.hdr = &hdr;
+	cfg.cfghdr.hdr = &hdr;
 	cfg.physAddr = -1;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;
@@ -3863,7 +3876,7 @@ GetLanConfigPages(MPT_ADAPTER *ioc)
 	hdr.PageLength = 0;
 	hdr.PageNumber = 1;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
-	cfg.hdr = &hdr;
+	cfg.cfghdr.hdr = &hdr;
 	cfg.physAddr = -1;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;
@@ -3930,7 +3943,7 @@ GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
 	hdr.PageLength = 0;
 	hdr.PageNumber = 0;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
-	cfg.hdr = &hdr;
+	cfg.cfghdr.hdr = &hdr;
 	cfg.physAddr = -1;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;
@@ -4012,7 +4025,7 @@ GetIoUnitPage2(MPT_ADAPTER *ioc)
 	hdr.PageLength = 0;
 	hdr.PageNumber = 2;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
-	cfg.hdr = &hdr;
+	cfg.cfghdr.hdr = &hdr;
 	cfg.physAddr = -1;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;
@@ -4102,7 +4115,7 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
 	header.PageLength = 0;
 	header.PageNumber = 0;
 	header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
-	cfg.hdr = &header;
+	cfg.cfghdr.hdr = &header;
 	cfg.physAddr = -1;
 	cfg.pageAddr = portnum;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4122,6 +4135,8 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
 				ioc->spi_data.minSyncFactor = MPT_ASYNC;
 				ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
 				rc = 1;
+				ddvprintk((MYIOC_s_INFO_FMT "Unable to read PortPage0 minSyncFactor=%x\n",
+					ioc->name, ioc->spi_data.minSyncFactor));
 			} else {
 				/* Save the Port Page 0 data
 				 */
@@ -4131,7 +4146,7 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)

 				if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
 					ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
-					dinitprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
+					ddvprintk((KERN_INFO MYNAM " :%s noQas due to Capabilities=%x\n",
 						ioc->name, pPP0->Capabilities));
 				}
 				ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
@@ -4140,6 +4155,8 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
 					ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
 					data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
 					ioc->spi_data.minSyncFactor = (u8) (data >> 8);
+					ddvprintk((MYIOC_s_INFO_FMT "PortPage0 minSyncFactor=%x\n",
+						ioc->name, ioc->spi_data.minSyncFactor));
 				} else {
 					ioc->spi_data.maxSyncOffset = 0;
 					ioc->spi_data.minSyncFactor = MPT_ASYNC;
@@ -4152,8 +4169,11 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
 				if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
 					(ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE))  {

-				if (ioc->spi_data.minSyncFactor < MPT_ULTRA)
+					if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
 						ioc->spi_data.minSyncFactor = MPT_ULTRA;
+						ddvprintk((MYIOC_s_INFO_FMT "HVD or SE detected, minSyncFactor=%x\n",
+							ioc->name, ioc->spi_data.minSyncFactor));
+					}
 				}
 			}
 			if (pbuf) {
@@ -4168,7 +4188,7 @@ mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
 	header.PageLength = 0;
 	header.PageNumber = 2;
 	header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
-	cfg.hdr = &header;
+	cfg.cfghdr.hdr = &header;
 	cfg.physAddr = -1;
 	cfg.pageAddr = portnum;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4236,7 +4256,7 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
 	header.PageLength = 0;
 	header.PageNumber = 1;
 	header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
-	cfg.hdr = &header;
+	cfg.cfghdr.hdr = &header;
 	cfg.physAddr = -1;
 	cfg.pageAddr = portnum;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4245,8 +4265,8 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
 	if (mpt_config(ioc, &cfg) != 0)
 		 return -EFAULT;

-	ioc->spi_data.sdp1version = cfg.hdr->PageVersion;
-	ioc->spi_data.sdp1length = cfg.hdr->PageLength;
+	ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
+	ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;

 	header.PageVersion = 0;
 	header.PageLength = 0;
@@ -4255,8 +4275,8 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
 	if (mpt_config(ioc, &cfg) != 0)
 		 return -EFAULT;

-	ioc->spi_data.sdp0version = cfg.hdr->PageVersion;
-	ioc->spi_data.sdp0length = cfg.hdr->PageLength;
+	ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
+	ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;

 	dcprintk((MYIOC_s_INFO_FMT "Headers: 0: version %d length %d\n",
 			ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
@@ -4298,7 +4318,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc)
 	header.PageLength = 0;
 	header.PageNumber = 2;
 	header.PageType = MPI_CONFIG_PAGETYPE_IOC;
-	cfg.hdr = &header;
+	cfg.cfghdr.hdr = &header;
 	cfg.physAddr = -1;
 	cfg.pageAddr = 0;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4394,7 +4414,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
 	header.PageLength = 0;
 	header.PageNumber = 3;
 	header.PageType = MPI_CONFIG_PAGETYPE_IOC;
-	cfg.hdr = &header;
+	cfg.cfghdr.hdr = &header;
 	cfg.physAddr = -1;
 	cfg.pageAddr = 0;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4446,7 +4466,7 @@ mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
 	header.PageLength = 0;
 	header.PageNumber = 4;
 	header.PageType = MPI_CONFIG_PAGETYPE_IOC;
-	cfg.hdr = &header;
+	cfg.cfghdr.hdr = &header;
 	cfg.physAddr = -1;
 	cfg.pageAddr = 0;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4498,7 +4518,7 @@ mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
 	header.PageLength = 0;
 	header.PageNumber = 1;
 	header.PageType = MPI_CONFIG_PAGETYPE_IOC;
-	cfg.hdr = &header;
+	cfg.cfghdr.hdr = &header;
 	cfg.physAddr = -1;
 	cfg.pageAddr = 0;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -4580,13 +4600,13 @@ SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)

 	evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
 	if (evnp == NULL) {
-		dprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
+		devtprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
 				ioc->name));
 		return 0;
 	}
 	memset(evnp, 0, sizeof(*evnp));

-	dprintk((MYIOC_s_INFO_FMT "Sending EventNotification(%d)\n", ioc->name, EvSwitch));
+	devtprintk((MYIOC_s_INFO_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));

 	evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
 	evnp->ChainOffset = 0;
@@ -4610,8 +4630,10 @@ SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
 	EventAck_t	*pAck;

 	if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
-		printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK request frame!\n",
-				ioc->name);
+		printk(MYIOC_s_WARN_FMT "Unable to allocate event ACK "
+			"request frame for Event=%x EventContext=%x EventData=%x!\n",
+			ioc->name, evnp->Event, le32_to_cpu(evnp->EventContext),
+			le32_to_cpu(evnp->Data[0]));
 		return -1;
 	}
 	memset(pAck, 0, sizeof(*pAck));
@@ -4647,10 +4669,11 @@ int
 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 {
 	Config_t	*pReq;
+	ConfigExtendedPageHeader_t  *pExtHdr = NULL;
 	MPT_FRAME_HDR	*mf;
 	unsigned long	 flags;
 	int		 ii, rc;
-	u32		 flagsLength;
+	int		 flagsLength;
 	int		 in_isr;

 	/*	Prevent calling wait_event() (below), if caller happens
@@ -4675,16 +4698,30 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 	pReq->Reserved = 0;
 	pReq->ChainOffset = 0;
 	pReq->Function = MPI_FUNCTION_CONFIG;
+
+	/* Assume page type is not extended and clear "reserved" fields. */
 	pReq->ExtPageLength = 0;
 	pReq->ExtPageType = 0;
 	pReq->MsgFlags = 0;
+
 	for (ii=0; ii < 8; ii++)
 		pReq->Reserved2[ii] = 0;

-	pReq->Header.PageVersion = pCfg->hdr->PageVersion;
-	pReq->Header.PageLength = pCfg->hdr->PageLength;
-	pReq->Header.PageNumber = pCfg->hdr->PageNumber;
-	pReq->Header.PageType = (pCfg->hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
+	pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
+	pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
+	pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
+	pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
+
+	if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+		pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
+		pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
+		pReq->ExtPageType = pExtHdr->ExtPageType;
+		pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+
+		/* Page Length must be treated as a reserved field for the extended header. */
+		pReq->Header.PageLength = 0;
+	}
+
 	pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);

 	/* Add a SGE to the config request.
@@ -4694,13 +4731,21 @@ mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 	else
 		flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;

-	flagsLength |= pCfg->hdr->PageLength * 4;
+	if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+		flagsLength |= pExtHdr->ExtPageLength * 4;
+
+		dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
+			ioc->name, pReq->ExtPageType, pReq->Header.PageNumber, pReq->Action));
+	}
+	else {
+		flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
+
+		dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
+			ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+	}

 	mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);

-	dcprintk((MYIOC_s_INFO_FMT "Sending Config request type %d, page %d and action %d\n",
-		ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
-
 	/* Append pCfg pointer to end of mf
 	 */
 	*((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) =  (void *) pCfg;
@@ -4789,8 +4834,8 @@ mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
 	pReq->Reserved3 = 0;
 	pReq->NumAddressBytes = 0x01;
 	pReq->Reserved4 = 0;
-	pReq->DataLength = 0x04;
-	pdev = (struct pci_dev *) ioc->pcidev;
+	pReq->DataLength = cpu_to_le16(0x04);
+	pdev = ioc->pcidev;
 	if (pdev->devfn & 1)
 		pReq->DeviceAddr = 0xB2;
 	else
@@ -5504,6 +5549,8 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 	 *  If needed, send (a single) EventAck.
 	 */
 	if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
+		devtprintk((MYIOC_s_WARN_FMT
+			"EventAck required\n",ioc->name));
 		if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
 			devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
 					ioc->name, ii));
@@ -5584,7 +5631,7 @@ mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
 	case 0x00080000:
 		desc = "Outbound DMA Overrun";
 		break;
-	
+
 	case 0x00090000:
 		desc = "Task Management";
 		break;
@@ -5600,7 +5647,7 @@ mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info)
 	case 0x000C0000:
 		desc = "Untagged Table Size";
 		break;
-	
+
 	}

 	printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
@@ -5692,7 +5739,7 @@ mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
 		break;

 	case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
-		/* This error is checked in scsi_io_done(). Skip. 
+		/* This error is checked in scsi_io_done(). Skip.
 		desc = "SCSI Data Underrun";
 		*/
 		break;
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -915,7 +915,10 @@ struct scsi_cmnd;
 typedef struct _x_config_parms {
 	struct list_head	 linkage;	/* linked list */
 	struct timer_list	 timer;		/* timer function for this request  */
-	ConfigPageHeader_t	*hdr;
+	union {
+		ConfigExtendedPageHeader_t	*ehdr;
+		ConfigPageHeader_t	*hdr;
+	} cfghdr;
 	dma_addr_t		 physAddr;
 	int			 wait_done;	/* wait for this request */
 	u32			 pageAddr;	/* properly formatted */
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -242,7 +242,7 @@ mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
 		/* Set the command status to GOOD if IOC Status is GOOD
 		 * OR if SCSI I/O cmd and data underrun or recovered error.
 		 */
-		iocStatus = reply->u.reply.IOCStatus & MPI_IOCSTATUS_MASK;
+		iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
 		if (iocStatus  == MPI_IOCSTATUS_SUCCESS)
 			ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;

@@ -2324,7 +2324,7 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)
 	hdr.PageLength = 0;
 	hdr.PageNumber = 0;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
-	cfg.hdr = &hdr;
+	cfg.cfghdr.hdr = &hdr;
 	cfg.physAddr = -1;
 	cfg.pageAddr = 0;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
@@ -2333,7 +2333,7 @@ mptctl_hp_hostinfo(unsigned long arg, unsigned int data_size)

 	strncpy(karg.serial_number, " ", 24);
 	if (mpt_config(ioc, &cfg) == 0) {
-		if (cfg.hdr->PageLength > 0) {
+		if (cfg.cfghdr.hdr->PageLength > 0) {
 			/* Issue the second config page request */
 			cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;

@@ -2479,7 +2479,7 @@ mptctl_hp_targetinfo(unsigned long arg)
 		hdr.PageNumber = 0;
 		hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;

-		cfg.hdr = &hdr;
+		cfg.cfghdr.hdr = &hdr;
 		cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 		cfg.dir = 0;
 		cfg.timeout = 0;
@@ -2527,15 +2527,15 @@ mptctl_hp_targetinfo(unsigned long arg)
 	hdr.PageNumber = 3;
 	hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;

-	cfg.hdr = &hdr;
+	cfg.cfghdr.hdr = &hdr;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
 	cfg.dir = 0;
 	cfg.timeout = 0;
 	cfg.physAddr = -1;
-	if ((mpt_config(ioc, &cfg) == 0) && (cfg.hdr->PageLength > 0)) {
+	if ((mpt_config(ioc, &cfg) == 0) && (cfg.cfghdr.hdr->PageLength > 0)) {
 		/* Issue the second config page request */
 		cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
-		data_sz = (int) cfg.hdr->PageLength * 4;
+		data_sz = (int) cfg.cfghdr.hdr->PageLength * 4;
 		pg3_alloc = (SCSIDevicePage3_t *) pci_alloc_consistent(
 							ioc->pcidev, data_sz, &page_dma);
 		if (pg3_alloc) {
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -281,12 +281,12 @@ mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
 		offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
 		chain_idx = offset / ioc->req_sz;
 		rc = SUCCESS;
-		dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer (index %d), got buf=%p\n",
-			ioc->name, *retIndex, chainBuf));
+		dsgprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
+			ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
 	} else {
 		rc = FAILED;
 		chain_idx = MPT_HOST_NO_CHAIN;
-		dfailprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
+		dfailprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer failed\n",
 			ioc->name));
 	}
 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
@@ -432,7 +432,7 @@ nextSGEset:
 			 */
 			pReq->ChainOffset = 0;
 			RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor)  + 1) & 0x03;
-			dsgprintk((MYIOC_s_ERR_FMT 
+			dsgprintk((MYIOC_s_INFO_FMT
 			    "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
 			ioc->RequestNB[req_idx] = RequestNB;
 		}
@@ -491,11 +491,12 @@ nextSGEset:
 		/* NOTE: psge points to the beginning of the chain element
 		 * in current buffer. Get a chain buffer.
 		 */
-		dsgprintk((MYIOC_s_INFO_FMT 
-		    "calling getFreeChainBuffer SCSI cmd=%02x (%p)\n",
-		    ioc->name, pReq->CDB[0], SCpnt));
-		if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED)
+		if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
+			dfailprintk((MYIOC_s_INFO_FMT
+			    "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
+ 			    ioc->name, pReq->CDB[0], SCpnt));
 			return FAILED;
+		}

 		/* Update the tracking arrays.
 		 * If chainSge == NULL, update ReqToChain, else ChainToChain
@@ -577,14 +578,20 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 		return 1;
 	}

-	dmfprintk((MYIOC_s_INFO_FMT
-		"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
-		ioc->name, mf, mr, sc, req_idx));
-
 	sc->result = DID_OK << 16;		/* Set default reply as OK */
 	pScsiReq = (SCSIIORequest_t *) mf;
 	pScsiReply = (SCSIIOReply_t *) mr;

+	if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
+		dmfprintk((MYIOC_s_INFO_FMT
+			"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
+			ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
+	}else{
+		dmfprintk((MYIOC_s_INFO_FMT
+			"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
+			ioc->name, mf, mr, sc, req_idx));
+	}
+
 	if (pScsiReply == NULL) {
 		/* special context reply handling */
 		;
@@ -658,8 +665,8 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 				/* Sufficient data transfer occurred */
 				sc->result = (DID_OK << 16) | scsi_status;
 			} else if ( xfer_cnt == 0 ) {
-				/* A CRC Error causes this condition; retry */ 
-				sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) | 
+				/* A CRC Error causes this condition; retry */
+				sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) |
 					(CHECK_CONDITION << 1);
 				sc->sense_buffer[0] = 0x70;
 				sc->sense_buffer[2] = NO_SENSE;
@@ -668,7 +675,9 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 			} else {
 				sc->result = DID_SOFT_ERROR << 16;
 			}
-			dreplyprintk((KERN_NOTICE "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->target));
+			dreplyprintk((KERN_NOTICE
+			    "RESIDUAL_MISMATCH: result=%x on id=%d\n",
+			    sc->result, sc->device->id));
 			break;

 		case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
@@ -796,7 +805,6 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 	return 1;
 }

-
 /*
 *	mptscsih_flush_running_cmds - For each command found, search
 *		Scsi_Host instance taskQ and reply to OS.
@@ -1017,7 +1025,7 @@ mptscsih_remove(struct pci_dev *pdev)
 	scsi_host_put(host);

 	mpt_detach(pdev);
-	
+
 }

 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1072,7 +1080,7 @@ mptscsih_resume(struct pci_dev *pdev)
 	MPT_SCSI_HOST		*hd;

 	mpt_resume(pdev);
-	
+
 	if(!host)
 		return 0;

@@ -1214,8 +1222,8 @@ mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t off
 	int size = 0;

 	if (func) {
-		/* 
-		 * write is not supported 
+		/*
+		 * write is not supported
 		 */
 	} else {
 		if (start)
@@ -1535,17 +1543,17 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, in
 	 */
 	if (mptscsih_tm_pending_wait(hd) == FAILED) {
 		if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
-			dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler abort: "
+			dtmprintk((KERN_INFO MYNAM ": %s: TMHandler abort: "
 			   "Timed out waiting for last TM (%d) to complete! \n",
 			   hd->ioc->name, hd->tmPending));
 			return FAILED;
 		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
-			dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler target reset: "
+			dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target reset: "
 			   "Timed out waiting for last TM (%d) to complete! \n",
 			   hd->ioc->name, hd->tmPending));
 			return FAILED;
 		} else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
-			dtmprintk((KERN_WARNING MYNAM ": %s: TMHandler bus reset: "
+			dtmprintk((KERN_INFO MYNAM ": %s: TMHandler bus reset: "
 			   "Timed out waiting for last TM (%d) to complete! \n",
 			   hd->ioc->name, hd->tmPending));
 			if (hd->tmPending & (1 << MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS))
@@ -1631,8 +1639,7 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun
 	if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc)) == NULL) {
 		dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
 				hd->ioc->name));
-		//return FAILED;
-		return -999;
+		return FAILED;
 	}
 	dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
 			hd->ioc->name, mf));
@@ -1661,9 +1668,8 @@ mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun

 	pScsiTm->TaskMsgContext = ctx2abort;

-	dtmprintk((MYIOC_s_INFO_FMT
-		"IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
-		hd->ioc->name, ctx2abort, type));
+	dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
+			hd->ioc->name, ctx2abort, type));

 	DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);

@@ -1902,13 +1908,13 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)

 	/*  If we can't locate the host to reset, then we failed. */
 	if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
-		dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: "
+		dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
 			     "Can't locate host! (sc=%p)\n",
 			     SCpnt ) );
 		return FAILED;
 	}

-	printk(KERN_WARNING MYNAM ": %s: >> Attempting host reset! (sc=%p)\n",
+	printk(KERN_WARNING MYNAM ": %s: Attempting host reset! (sc=%p)\n",
 	       hd->ioc->name, SCpnt);

 	/*  If our attempts to reset the host failed, then return a failed
@@ -1924,7 +1930,7 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 		hd->tmState = TM_STATE_NONE;
 	}

-	dtmprintk( ( KERN_WARNING MYNAM ": mptscsih_host_reset: "
+	dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
 		     "Status = %s\n",
 		     (status == SUCCESS) ? "SUCCESS" : "FAILED" ) );

@@ -1951,8 +1957,8 @@ mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
 		if (hd->tmState == TM_STATE_NONE) {
 			hd->tmState = TM_STATE_IN_PROGRESS;
 			hd->tmPending = 1;
-			status = SUCCESS;
 			spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
+			status = SUCCESS;
 			break;
 		}
 		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
@@ -1980,7 +1986,7 @@ mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
 		spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
 		if(hd->tmPending == 0) {
 			status = SUCCESS;
-			spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
+ 			spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
 			break;
 		}
 		spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
@@ -2318,10 +2324,10 @@ mptscsih_slave_configure(struct scsi_device *device)
 	if (pTarget == NULL) {
 		/* Driver doesn't know about this device.
 		 * Kernel may generate a "Dummy Lun 0" which
-		 * may become a real Lun if a 
+		 * may become a real Lun if a
 		 * "scsi add-single-device" command is executed
-		 * while the driver is active (hot-plug a 
-		 * device).  LSI Raid controllers need 
+		 * while the driver is active (hot-plug a
+		 * device).  LSI Raid controllers need
 		 * queue_depth set to DEV_HIGH for this reason.
 		 */
 		scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG,
@@ -2691,7 +2697,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *
 	 * If the peripheral qualifier filter is enabled then if the target reports a 0x1
 	 * (i.e. The targer is capable of supporting the specified peripheral device type
 	 * on this logical unit; however, the physical device is not currently connected
-	 * to this logical unit) it will be converted to a 0x3 (i.e. The target is not 
+	 * to this logical unit) it will be converted to a 0x3 (i.e. The target is not
 	 * capable of supporting a physical device on this logical unit). This is to work
 	 * around a bug in th emid-layer in some distributions in which the mid-layer will
 	 * continue to try to communicate to the LUN and evntually create a dummy LUN.
@@ -3194,8 +3200,8 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
 		/* Get a MF for this command.
 		 */
 		if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
-			dprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
-						ioc->name));
+			dfailprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
+				ioc->name));
 			return -EAGAIN;
 		}

@@ -3289,7 +3295,7 @@ mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus)
 	/* Get a MF for this command.
 	 */
 	if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
-		dprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
+		dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
 					ioc->name));
 		return -EAGAIN;
 	}
@@ -3447,7 +3453,7 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 				 * some type of error occurred.
 				 */
 				MpiRaidActionReply_t	*pr = (MpiRaidActionReply_t *)mr;
-				if (pr->ActionStatus == MPI_RAID_ACTION_ASTATUS_SUCCESS)
+				if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
 					completionCode = MPT_SCANDV_GOOD;
 				else
 					completionCode = MPT_SCANDV_SOME_ERROR;
@@ -3955,7 +3961,7 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
 				header1.PageLength = ioc->spi_data.sdp1length;
 				header1.PageNumber = 1;
 				header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
-				cfg.hdr = &header1;
+				cfg.cfghdr.hdr = &header1;
 				cfg.physAddr = cfg1_dma_addr;
 				cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
 				cfg.dir = 1;
@@ -3996,9 +4002,9 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
 			dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
 				"offset=0 negoFlags=%x request=%x config=%x\n",
 				id, flags, requested, configuration));
-			pcfg1Data->RequestedParameters = le32_to_cpu(requested);
+			pcfg1Data->RequestedParameters = cpu_to_le32(requested);
 			pcfg1Data->Reserved = 0;
-			pcfg1Data->Configuration = le32_to_cpu(configuration);
+			pcfg1Data->Configuration = cpu_to_le32(configuration);
 			cfg.pageAddr = (bus<<8) | id;
 			mpt_config(hd->ioc, &cfg);
 		}
@@ -4353,7 +4359,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 	/* Prep cfg structure
 	 */
 	cfg.pageAddr = (bus<<8) | id;
-	cfg.hdr = NULL;
+	cfg.cfghdr.hdr = NULL;

 	/* Prep SDP0 header
 	 */
@@ -4399,7 +4405,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 	pcfg1Data = (SCSIDevicePage1_t *) (pDvBuf + sz);
 	cfg1_dma_addr = dvbuf_dma + sz;

-	/* Skip this ID? Set cfg.hdr to force config page write
+	/* Skip this ID? Set cfg.cfghdr.hdr to force config page write
 	 */
 	{
 		ScsiCfgData *pspi_data = &hd->ioc->spi_data;
@@ -4417,7 +4423,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)

 				dv.cmd = MPT_SET_MAX;
 				mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-				cfg.hdr = &header1;
+				cfg.cfghdr.hdr = &header1;

 				/* Save the final negotiated settings to
 				 * SCSI device page 1.
@@ -4483,7 +4489,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 		dv.cmd = MPT_SET_MIN;
 		mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);

-		cfg.hdr = &header1;
+		cfg.cfghdr.hdr = &header1;
 		cfg.physAddr = cfg1_dma_addr;
 		cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
 		cfg.dir = 1;
@@ -4596,8 +4602,8 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 				if ((pbuf1[56] & 0x02) == 0) {
 					pTarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
 					hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
-					ddvprintk((MYIOC_s_NOTE_FMT 
-					    "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n", 
+					ddvprintk((MYIOC_s_NOTE_FMT
+					    "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n",
 					    ioc->name, id, pbuf1[56]));
 				}
 			}
@@ -4637,7 +4643,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 					u32 sdp0_info;
 					u32 sdp0_nego;

-					cfg.hdr = &header0;
+					cfg.cfghdr.hdr = &header0;
 					cfg.physAddr = cfg0_dma_addr;
 					cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
 					cfg.dir = 0;
@@ -4673,7 +4679,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 						if (!firstPass)
 							doFallback = 1;
 					} else {
-						ddvprintk((MYIOC_s_NOTE_FMT 
+						ddvprintk((MYIOC_s_NOTE_FMT
 						    "DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id));
 						hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE;
 						mptscsih_initTarget(hd,
@@ -4689,8 +4695,8 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)

 			} else if (rc == MPT_SCANDV_ISSUE_SENSE)
 				doFallback = 1;	/* set fallback flag */
-			else if ((rc == MPT_SCANDV_DID_RESET) || 
-				 (rc == MPT_SCANDV_SENSE) || 
+			else if ((rc == MPT_SCANDV_DID_RESET) ||
+				 (rc == MPT_SCANDV_SENSE) ||
 				 (rc == MPT_SCANDV_FALLBACK))
 				doFallback = 1;	/* set fallback flag */
 			else
@@ -4722,7 +4728,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 	 * 4) release
 	 * 5) update nego parms to target struct
 	 */
-	cfg.hdr = &header1;
+	cfg.cfghdr.hdr = &header1;
 	cfg.physAddr = cfg1_dma_addr;
 	cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
 	cfg.dir = 1;
@@ -5121,12 +5127,12 @@ target_done:

 	/* Set if cfg1_dma_addr contents is valid
 	 */
-	if ((cfg.hdr != NULL) && (retcode == 0)){
+	if ((cfg.cfghdr.hdr != NULL) && (retcode == 0)){
 		/* If disk, not U320, disable QAS
 		 */
 		if ((inq0 == 0) && (dv.now.factor > MPT_ULTRA320)) {
 			hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
-			ddvprintk((MYIOC_s_NOTE_FMT 
+			ddvprintk((MYIOC_s_NOTE_FMT
 			    "noQas set due to id=%d has factor=%x\n", ioc->name, id, dv.now.factor));
 		}

@@ -5137,7 +5143,7 @@ target_done:
 		 * skip save of the final negotiated settings to
 		 * SCSI device page 1.
 		 *
-		cfg.hdr = &header1;
+		cfg.cfghdr.hdr = &header1;
 		cfg.physAddr = cfg1_dma_addr;
 		cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
 		cfg.dir = 1;
@@ -5248,7 +5254,7 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
 		/* Update tmax values with those from Device Page 0.*/
 		pPage0 = (SCSIDevicePage0_t *) pPage;
 		if (pPage0) {
-			val = cpu_to_le32(pPage0->NegotiatedParameters);
+			val = le32_to_cpu(pPage0->NegotiatedParameters);
 			dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
 			dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
 			dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
@@ -5276,12 +5282,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
 				dv->now.offset, &val, &configuration, dv->now.flags);
 			dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
 				id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
-			pPage1->RequestedParameters = le32_to_cpu(val);
+			pPage1->RequestedParameters = cpu_to_le32(val);
 			pPage1->Reserved = 0;
-			pPage1->Configuration = le32_to_cpu(configuration);
+			pPage1->Configuration = cpu_to_le32(configuration);
 		}

-		ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x request=%x configuration=%x\n",
+		ddvprintk(("id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x configuration=%x\n",
 				id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
 		break;

@@ -5301,9 +5307,9 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
 				offset, &val, &configuration, negoFlags);
 			dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
 				id, width, factor, offset, negoFlags, val, configuration));
-			pPage1->RequestedParameters = le32_to_cpu(val);
+			pPage1->RequestedParameters = cpu_to_le32(val);
 			pPage1->Reserved = 0;
-			pPage1->Configuration = le32_to_cpu(configuration);
+			pPage1->Configuration = cpu_to_le32(configuration);
 		}
 		ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n",
 				id, width, factor, offset, val, configuration, negoFlags));
@@ -5377,12 +5383,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
 		if (pPage1) {
 			mptscsih_setDevicePage1Flags (width, factor, offset, &val,
 						&configuration, dv->now.flags);
-			dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x flags=%x request=%x config=%x\n",
+			dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
 			     id, width, offset, factor, dv->now.flags, val, configuration));

-			pPage1->RequestedParameters = le32_to_cpu(val);
+			pPage1->RequestedParameters = cpu_to_le32(val);
 			pPage1->Reserved = 0;
-			pPage1->Configuration = le32_to_cpu(configuration);
+			pPage1->Configuration = cpu_to_le32(configuration);
 		}

 		ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n",
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -162,15 +162,15 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	u8			*mem;
 	int			error=0;
 	int			r;
-	
+
 	if ((r = mpt_attach(pdev,id)) != 0)
 		return r;
-	
+
 	ioc = pci_get_drvdata(pdev);
 	ioc->DoneCtx = mptspiDoneCtx;
 	ioc->TaskCtx = mptspiTaskCtx;
 	ioc->InternalCtx = mptspiInternalCtx;
-	
+
 	/*  Added sanity check on readiness of the MPT adapter.
 	 */
 	if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {