Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support to enable irq wake for slot gpio
   - Remove MMC_CAP2_HC_ERASE_SZ and make it the default behaviour
   - Improve R1 response error checks for stop commands
   - Cleanup and clarify some MMC specific code
   - Keep card runtime resumed while adding SDIO function devices
   - Use device_property_read instead of of_property_read in mmc_of_parse()
   - Move boot partition locking into a driver op to enable proper I/O scheduling
   - Move multi/single-ioctl() to use block layer to enable proper I/O scheduling
   - Delete bounce buffer Kconfig option
   - Improve the eMMC HW reset support provided via the eMMC pwrseq
   - Add host API to manage SDIO IRQs from a workqueue

  MMC host:
   - dw_mmc: Drop support for multiple slots
   - dw_mmc: Use device_property_read instead of of_property_read
   - dw_mmc-rockchip: Optional improved tuning to greatly decrease tuning time
   - dw_mmc: Prevent rpm suspend for SDIO IRQs instead of always for SDIO cards
   - dw_mmc: Convert to use MMC_CAP2_SDIO_IRQ_NOTHREAD for SDIO IRQs
   - omap_hsmmc: Convert to mmc regulator APIs to consolidate code
   - omap_hsmmc: Deprecate "vmmc_aux" in DT and use "vqmmc" instead
   - tmio: make sure SDIO gets reinitialized after resume
   - sdhi: add CMD23 support to R-Car Gen2 & Gen3
   - tmio: add CMD23 support
   - sdhi/tmio: Refactor code and rename files to simplify Kconfig options
   - sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
   - sdhci-pci: Add support for Intel CNP
   - sdhci-esdhc-imx: Remove ENGcm07207 workaround - allow multi block transfers
   - sdhci-esdhc-imx: Allow all supported prescaler values
   - sdhci-esdhc-imx: Fix DAT line software reset
   - sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDR
   - atmel-mci: Drop AVR32 support"

* tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: dw_mmc: remove the unnecessary slot variable
  mmc: dw_mmc: use the 'slot' instead of 'cur_slot'
  mmc: dw_mmc: remove the 'id' arguments about functions relevant to slot
  mmc: dw_mmc: change the array of slots
  mmc: dw_mmc: remove the loop about finding slots
  mmc: dw_mmc: deprecated the "num-slots" property
  mmc: dw_mmc-rockchip: parse rockchip, desired-num-phases from DT
  dt-bindings: rockchip-dw-mshc: add optional rockchip, desired-num-phases
  mmc: renesas-sdhi: improve checkpatch cleanness
  mmc: tmio: improve checkpatch cleanness
  mmc: sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
  mmc: slot-gpio: Add support to enable irq wake on cd_irq
  mmc: core: Remove MMC_CAP2_HC_ERASE_SZ
  mmc: core: for data errors, take response of stop cmd into account
  mmc: core: check also R1 response for stop commands
  mmc: core: Clarify code for sending CSD
  mmc: core: Drop mmc_all_send_cid() and use mmc_send_cxd_native() instead
  mmc: core: Re-factor code for sending CID
  mmc: core: Remove redundant code in mmc_send_cid()
  mmc: core: Make mmc_can_reset() static
  ...

arch/arm/boot/dts/omap3-overo-base.dtsi

@@ -74,16 +74,6 @@
 		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;		/* gpio_16: WiFi nReset */
 		startup-delay-us = <10000>;
 	};
-
-	/* Regulator to trigger the nReset signal of the Bluetooth module */
-	w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-bt-nreset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;		/* gpio_164: BT nReset */
-		startup-delay-us = <10000>;
-	};
 };
 
 &omap3_pmx_core {
@@ -191,7 +181,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&w3cbw003c_npoweron>;
-	vqmmc-supply = <&w3cbw003c_bt_nreset>;
 	vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
 	bus-width = <4>;
 	cap-sdio-irq;