Merge tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add new API to set VCCQ voltage - mmc_regulator_set_vqmmc()
   - Add new ioctl to allow userspace to send multi commands
   - Wait for card busy signalling before starting SDIO requests
   - Remove MMC_CLKGATE
   - Enable tuning for DDR50 mode
   - Some code clean-up/improvements to mmc pwrseq
   - Use highest priority for eMMC restart handler
   - Add DT bindings for eMMC hardware reset support
   - Extend the mmc_send_tuning() API
   - Improve ios show for debugfs
   - A couple of code optimizations

  MMC host:
   - Some generic OF improvements
   - Various code clean-ups
   - sirf: Add support for DDR50
   - sunxi: Add support for card busy detection
   - mediatek: Use MMC_CAP_RUNTIME_RESUME
   - mediatek: Add support for eMMC HW-reset
   - mediatek: Add support for HS400
   - dw_mmc: Convert to use the new mmc_regulator_set_vqmmc() API
   - dw_mmc: Add external DMA interface support
   - dw_mmc: Some various improvements
   - dw_mmc-rockchip: MMC tuning with the clock phase framework
   - sdhci: Properly clear IRQs during resume
   - sdhci: Enable tuning for DDR50 mode
   - sdhci-of-esdhc: Use IRQ mode for card detection
   - sdhci-of-esdhc: Support both BE and LE host controller
   - sdhci-pci: Build o2micro support in the same module
   - sdhci-pci: Support for new Intel host controllers
   - sdhci-acpi: Support for new Intel host controllers"

* tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmc: (73 commits)
  mmc: dw_mmc: fix the wrong setting for UHS-DDR50 mode
  mmc: dw_mmc: fix the CardThreshold boundary at CardThrCtl register
  mmc: dw_mmc: NULL dereference in error message
  mmc: pwrseq: Use highest priority for eMMC restart handler
  mmc: mediatek: add HS400 support
  mmc: mmc: extend the mmc_send_tuning()
  mmc: mediatek: add implement of ops->hw_reset()
  mmc: mediatek: fix got GPD checksum error interrupt when data transfer
  mmc: mediatek: change the argument "ddr" to "timing"
  mmc: mediatek: make cmd_ints_mask to const
  mmc: dt-bindings: update Mediatek MMC bindings
  mmc: core: Add DT bindings for eMMC hardware reset support
  mmc: omap_hsmmc: Enable omap_hsmmc for Keystone 2
  mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers
  mmc: sdhci-pci: Add more PCI IDs for Intel controllers
  arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
  arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
  mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
  ...

include/uapi/linux/mmc/ioctl.h

@@ -45,8 +45,24 @@ struct mmc_ioc_cmd {
 };
 #define mmc_ioc_cmd_set_data(ic, ptr) ic.data_ptr = (__u64)(unsigned long) ptr
 
-#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
+/**
+ * struct mmc_ioc_multi_cmd - multi command information
+ * @num_of_cmds: Number of commands to send. Must be equal to or less than
+ *	MMC_IOC_MAX_CMDS.
+ * @cmds: Array of commands with length equal to 'num_of_cmds'
+ */
+struct mmc_ioc_multi_cmd {
+	__u64 num_of_cmds;
+	struct mmc_ioc_cmd cmds[0];
+};
 
+#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
+/*
+ * MMC_IOC_MULTI_CMD: Used to send an array of MMC commands described by
+ *	the structure mmc_ioc_multi_cmd. The MMC driver will issue all
+ *	commands in array in sequence to card.
+ */
+#define MMC_IOC_MULTI_CMD _IOWR(MMC_BLOCK_MAJOR, 1, struct mmc_ioc_multi_cmd)
 /*
  * Since this ioctl is only meant to enhance (and not replace) normal access
  * to the mmc bus device, an upper data transfer limit of MMC_IOC_MAX_BYTES
@@ -54,4 +70,5 @@ struct mmc_ioc_cmd {
  * block device operations.
  */
 #define MMC_IOC_MAX_BYTES  (512L * 256)
+#define MMC_IOC_MAX_CMDS    255
 #endif /* LINUX_MMC_IOCTL_H */