iwlwifi: yoyo: add support for internal buffer allocation in D3

With yoyo a user can configure the internal buffer allocation in
SMEM to hold more log space, which is used for debugging D3 state.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200930191738.29b61ff6c78e.I235614bb2c255ee8ac49c2835796ac95a25215bf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h

@@ -301,6 +301,7 @@ struct iwl_fw_ini_hcmd_tlv {
  * @IWL_FW_INI_ALLOCATION_ID_DBGC1: allocation meant for DBGC1 configuration
  * @IWL_FW_INI_ALLOCATION_ID_DBGC2: allocation meant for DBGC2 configuration
  * @IWL_FW_INI_ALLOCATION_ID_DBGC3: allocation meant for DBGC3 configuration
+ * @IWL_FW_INI_ALLOCATION_ID_INTERNAL: allocation meant for Intreanl SMEM in D3
  * @IWL_FW_INI_ALLOCATION_NUM: number of allocation ids
 */
 enum iwl_fw_ini_allocation_id {
@@ -308,6 +309,7 @@ enum iwl_fw_ini_allocation_id {
 	IWL_FW_INI_ALLOCATION_ID_DBGC1,
 	IWL_FW_INI_ALLOCATION_ID_DBGC2,
 	IWL_FW_INI_ALLOCATION_ID_DBGC3,
+	IWL_FW_INI_ALLOCATION_ID_INTERNAL,
 	IWL_FW_INI_ALLOCATION_NUM,
 }; /* FW_DEBUG_TLV_ALLOCATION_ID_E_VER_1 */
 
@@ -347,7 +349,7 @@ enum iwl_fw_ini_buffer_location {
  * @IWL_FW_INI_REGION_CSR: CSR registers
  * @IWL_FW_INI_REGION_DRAM_IMR: IMR memory
  * @IWL_FW_INI_REGION_PCI_IOSF_CONFIG: PCI/IOSF config
- * @IWL_FW_INI_REGION_SPECIAL_DEVICE_MEMORY: special device memroy
+ * @IWL_FW_INI_REGION_SPECIAL_DEVICE_MEMORY: special device memory
  * @IWL_FW_INI_REGION_NUM: number of region types
  */
 enum iwl_fw_ini_region_type {

drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c

@@ -182,9 +182,13 @@ static int iwl_dbg_tlv_alloc_buf_alloc(struct iwl_trans *trans,
 	    alloc_id >= IWL_FW_INI_ALLOCATION_NUM)
 		goto err;
 
-	if ((buf_location == IWL_FW_INI_LOCATION_SRAM_PATH ||
-	     buf_location == IWL_FW_INI_LOCATION_NPK_PATH) &&
-	     alloc_id != IWL_FW_INI_ALLOCATION_ID_DBGC1)
+	if (buf_location == IWL_FW_INI_LOCATION_NPK_PATH &&
+	    alloc_id != IWL_FW_INI_ALLOCATION_ID_DBGC1)
+		goto err;
+
+	if (buf_location == IWL_FW_INI_LOCATION_SRAM_PATH &&
+	    alloc_id != IWL_FW_INI_ALLOCATION_ID_DBGC1 &&
+	    alloc_id != IWL_FW_INI_ALLOCATION_ID_INTERNAL)
 		goto err;
 
 	trans->dbg.fw_mon_cfg[alloc_id] = *alloc;

drivers/net/wireless/intel/iwlwifi/mvm/ops.c

@@ -133,6 +133,7 @@ module_exit(iwl_mvm_exit);
 static void iwl_mvm_nic_config(struct iwl_op_mode *op_mode)
 {
 	struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+	struct iwl_trans_debug *dbg = &mvm->trans->dbg;
 	u8 radio_cfg_type, radio_cfg_step, radio_cfg_dash;
 	u32 reg_val = 0;
 	u32 phy_config = iwl_mvm_get_phy_config(mvm);
@@ -169,7 +170,10 @@ static void iwl_mvm_nic_config(struct iwl_op_mode *op_mode)
 	if (mvm->trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_8000)
 		reg_val |= CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI;
 
-	if (iwl_fw_dbg_is_d3_debug_enabled(&mvm->fwrt))
+	if (iwl_fw_dbg_is_d3_debug_enabled(&mvm->fwrt) ||
+	    (iwl_trans_dbg_ini_valid(mvm->trans) &&
+	     dbg->fw_mon_cfg[IWL_FW_INI_ALLOCATION_ID_INTERNAL].buf_location)
+	    )
 		reg_val |= CSR_HW_IF_CONFIG_REG_D3_DEBUG;
 
 	iwl_trans_set_bits_mask(mvm->trans, CSR_HW_IF_CONFIG_REG,