xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

i2c: designware: Move SDA hold time configuration to common code

Browse Source 
SDA hold time configuration is common to both master and slave code. It
is also something that can be done once during probe and do only
register write when HW needs to be reinitialized.

Remove duplication and move SDA hold time configuration to common code.
It will be called from slave probe and for master code from a new
i2c_dw_set_timings_master() to where we will populate more probe time
timing parameter setting.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Jarkko Nikula
2018-06-19 14:23:22 +03:00
committed by Wolfram Sang
parent 3bd4f27727
commit 1080ee7e28
4 changed files with 56 additions and 42 deletions
Download Patch File Download Diff File Expand all files Collapse all files

37
drivers/i2c/busses/i2c-designware-common.c
View File

@@ -184,6 +184,43 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
}
int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
{
u32 reg;
int ret;
ret = i2c_dw_acquire_lock(dev);
if (ret)
return ret;
/* Configure SDA Hold Time if required */
reg = dw_readl(dev, DW_IC_COMP_VERSION);
if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
if (!dev->sda_hold_time) {
/* Keep previous hold time setting if no one set it */
dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
}
/*
* Workaround for avoiding TX arbitration lost in case I2C
* slave pulls SDA down "too quickly" after falling egde of
* SCL by enabling non-zero SDA RX hold. Specification says it
* extends incoming SDA low to high transition while SCL is
* high but it apprears to help also above issue.
*/
if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
} else if (dev->sda_hold_time) {
dev_warn(dev->dev,
"Hardware too old to adjust SDA hold time.\n");
dev->sda_hold_time = 0;
}
i2c_dw_release_lock(dev);
return 0;
}
void __i2c_dw_disable(struct dw_i2c_dev *dev)
{
int timeout = 100;