ARM: dts: at91: Switch to the new NAND bindings

Use the new EBI/NAND bindings to declare NAND chips and remove old NAND
nodes along the way.

Note that we keep using old bindings in at91rm9200.dtsi because this
SoC is not supported by the EBI driver.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
Boris Brezillon
2017-05-30 11:20:53 +02:00
committed by Alexandre Belloni
parent d9c41bf30c
commit 1004a2977b
37 changed files with 1289 additions and 953 deletions

View File

@@ -62,50 +62,69 @@
};
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
ebi0: ebi@10000000 {
status = "okay";
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x20000>;
};
nand_controller: nand-controller {
status = "okay";
pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
pinctrl-names = "default";
barebox@20000 {
label = "barebox";
reg = <0x20000 0x40000>;
};
nand@3 {
reg = <0x3 0x0 0x800000>;
rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
label = "atmel_nand";
bareboxenv@60000 {
label = "bareboxenv";
reg = <0x60000 0x20000>;
};
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
bareboxenv2@80000 {
label = "bareboxenv2";
reg = <0x80000 0x20000>;
};
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x20000>;
};
oftree@80000 {
label = "oftree";
reg = <0xa0000 0x20000>;
};
barebox@20000 {
label = "barebox";
reg = <0x20000 0x40000>;
};
kernel@a0000 {
label = "kernel";
reg = <0xc0000 0x400000>;
};
bareboxenv@60000 {
label = "bareboxenv";
reg = <0x60000 0x20000>;
};
rootfs@4a0000 {
label = "rootfs";
reg = <0x4c0000 0x7800000>;
};
bareboxenv2@80000 {
label = "bareboxenv2";
reg = <0x80000 0x20000>;
};
data@7ca0000 {
label = "data";
reg = <0x7cc0000 0x8340000>;
oftree@80000 {
label = "oftree";
reg = <0xa0000 0x20000>;
};
kernel@a0000 {
label = "kernel";
reg = <0xc0000 0x400000>;
};
rootfs@4a0000 {
label = "rootfs";
reg = <0x4c0000 0x7800000>;
};
data@7ca0000 {
label = "data";
reg = <0x7cc0000 0x8340000>;
};
};
};
};
};