Merge tag 'v3.7-rc7' into next/cleanup

Merging in mainline back to next/cleanup since it has collected a few
conflicts between fixes going upstream and some of the cleanup patches.
Git doesn't auto-resolve some of them, and they're mostly noise so let's
take care of it locally.

Conflicts are in:
	arch/arm/mach-omap2/omap_hwmod_44xx_data.c
	arch/arm/plat-omap/i2c.c
	drivers/video/omap2/dss/dss.c

Signed-off-by: Olof Johansson <olof@lixom.net>

drivers/i2c/busses/i2c-at91.c

@@ -39,6 +39,7 @@
 #define	AT91_TWI_STOP		0x0002	/* Send a Stop Condition */
 #define	AT91_TWI_MSEN		0x0004	/* Master Transfer Enable */
 #define	AT91_TWI_SVDIS		0x0020	/* Slave Transfer Disable */
+#define	AT91_TWI_QUICK		0x0040	/* SMBus quick command */
 #define	AT91_TWI_SWRST		0x0080	/* Software Reset */
 
 #define	AT91_TWI_MMR		0x0004	/* Master Mode Register */
@@ -212,7 +213,11 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 
 	INIT_COMPLETION(dev->cmd_complete);
 	dev->transfer_status = 0;
-	if (dev->msg->flags & I2C_M_RD) {
+
+	if (!dev->buf_len) {
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+		at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+	} else if (dev->msg->flags & I2C_M_RD) {
 		unsigned start_flags = AT91_TWI_START;
 
 		if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {

drivers/i2c/busses/i2c-mxs.c

@@ -287,12 +287,14 @@ read_init_dma_fail:
 select_init_dma_fail:
 	dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
 select_init_pio_fail:
+	dmaengine_terminate_all(i2c->dmach);
 	return -EINVAL;
 
 /* Write failpath. */
 write_init_dma_fail:
 	dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
 write_init_pio_fail:
+	dmaengine_terminate_all(i2c->dmach);
 	return -EINVAL;
 }
 

drivers/i2c/busses/i2c-omap.c

@@ -43,7 +43,6 @@
 #include <linux/slab.h>
 #include <linux/i2c-omap.h>
 #include <linux/pm_runtime.h>
-#include <linux/pm_qos.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_OMAP1_REV_2		0x20
@@ -187,8 +186,9 @@ struct omap_i2c_dev {
 	int			reg_shift;      /* bit shift for I2C register addresses */
 	struct completion	cmd_complete;
 	struct resource		*ioarea;
-	u32			latency;	/* maximum MPU wkup latency */
-	struct pm_qos_request	pm_qos_request;
+	u32			latency;	/* maximum mpu wkup latency */
+	void			(*set_mpu_wkup_lat)(struct device *dev,
+						    long latency);
 	u32			speed;		/* Speed of bus in kHz */
 	u32			dtrev;		/* extra revision from DT */
 	u32			flags;
@@ -494,7 +494,9 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx)
 		dev->b_hw = 1; /* Enable hardware fixes */
 
 	/* calculate wakeup latency constraint for MPU */
-	dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->latency = (1000000 * dev->threshold) /
+			(1000 * dev->speed / 8);
 }
 
 /*
@@ -522,6 +524,9 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	dev->buf = msg->buf;
 	dev->buf_len = msg->len;
 
+	/* make sure writes to dev->buf_len are ordered */
+	barrier();
+
 	omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
 
 	/* Clear the FIFO Buffers */
@@ -579,7 +584,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	 */
 	timeout = wait_for_completion_timeout(&dev->cmd_complete,
 						OMAP_I2C_TIMEOUT);
-	dev->buf_len = 0;
 	if (timeout == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		omap_i2c_init(dev);
@@ -629,16 +633,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	if (r < 0)
 		goto out;
 
-	/*
-	 * When waiting for completion of a i2c transfer, we need to
-	 * set a wake up latency constraint for the MPU. This is to
-	 * ensure quick enough wakeup from idle, when transfer
-	 * completes.
-	 */
-	if (dev->latency)
-		pm_qos_add_request(&dev->pm_qos_request,
-				   PM_QOS_CPU_DMA_LATENCY,
-				   dev->latency);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, dev->latency);
 
 	for (i = 0; i < num; i++) {
 		r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
@@ -646,8 +642,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 			break;
 	}
 
-	if (dev->latency)
-		pm_qos_remove_request(&dev->pm_qos_request);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, -1);
 
 	if (r == 0)
 		r = num;
@@ -1104,6 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	} else if (pdata != NULL) {
 		dev->speed = pdata->clkrate;
 		dev->flags = pdata->flags;
+		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
 		dev->dtrev = pdata->rev;
 	}
 
@@ -1159,8 +1156,9 @@ omap_i2c_probe(struct platform_device *pdev)
 			dev->b_hw = 1; /* Enable hardware fixes */
 
 		/* calculate wakeup latency constraint for MPU */
-		dev->latency = (1000000 * dev->fifo_size) /
-			       (1000 * dev->speed / 8);
+		if (dev->set_mpu_wkup_lat != NULL)
+			dev->latency = (1000000 * dev->fifo_size) /
+				       (1000 * dev->speed / 8);
 	}
 
 	/* reset ASAP, clearing any IRQs */

drivers/i2c/busses/i2c-s3c2410.c

@@ -806,6 +806,7 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 			dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
 			goto free_gpio;
 		}
+		i2c->gpios[idx] = gpio;
 
 		ret = gpio_request(gpio, "i2c-bus");
 		if (ret) {

drivers/i2c/muxes/i2c-mux-pinctrl.c

@@ -169,7 +169,7 @@ static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev)
 	mux->busses = devm_kzalloc(&pdev->dev,
 				   sizeof(mux->busses) * mux->pdata->bus_count,
 				   GFP_KERNEL);
-	if (!mux->states) {
+	if (!mux->busses) {
 		dev_err(&pdev->dev, "Cannot allocate busses\n");
 		ret = -ENOMEM;
 		goto err;