Merge 4.9-rc7 into usb-next

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman
2016-11-28 08:34:10 +01:00
545 changed files with 6309 additions and 3056 deletions

View File

@@ -64,8 +64,8 @@
};
ldo3_reg: ldo3 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -76,8 +76,8 @@
};
ldo5_reg: ldo5 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
@@ -100,14 +100,14 @@
};
ldo9_reg: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo10_reg: ldo10 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
};

View File

@@ -13,6 +13,11 @@
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>;
};
wl12xx_vmmc: wl12xx_vmmc {
compatible = "regulator-fixed";
regulator-name = "vwl1271";

View File

@@ -13,9 +13,9 @@
};
};
memory@0 {
memory@80000000 {
device_type = "memory";
reg = <0 0>;
reg = <0x80000000 0>;
};
leds {

View File

@@ -124,6 +124,7 @@
compatible = "ti,abe-twl6040";
ti,model = "omap5-uevm";
ti,jack-detection;
ti,mclk-freq = <19200000>;
ti,mcpdm = <&mcpdm>;
@@ -415,7 +416,7 @@
ti,backup-battery-charge-high-current;
};
gpadc {
gpadc: gpadc {
compatible = "ti,palmas-gpadc";
interrupts = <18 0
16 0
@@ -475,8 +476,8 @@
smps6_reg: smps6 {
/* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};

View File

@@ -74,7 +74,7 @@
/* Low speed expansion connector */
spi0: spi@9844000 {
label = "LS-SPI0";
cs-gpio = <&pio30 3 0>;
cs-gpios = <&pio30 3 0>;
status = "okay";
};

View File

@@ -282,11 +282,15 @@
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_cts_rts_a: uart1-cts-rts@0 {
allwinner,pins = "PG8", "PG9";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {

View File

@@ -8,7 +8,6 @@ generic-y += early_ioremap.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += export.h
generic-y += ioctl.h
generic-y += ipcbuf.h
generic-y += irq_regs.h

View File

@@ -33,7 +33,7 @@ endif
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
obj-$(CONFIG_FIQ) += fiq.o fiqasm.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARM_MODULE_PLTS) += module-plts.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o

183
arch/arm/kernel/armksyms.c Normal file
View File

@@ -0,0 +1,183 @@
/*
* linux/arch/arm/kernel/armksyms.c
*
* Copyright (C) 2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/cryptohash.h>
#include <linux/delay.h>
#include <linux/in6.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/arm-smccc.h>
#include <asm/checksum.h>
#include <asm/ftrace.h>
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
* doesn't really matter since they're not versioned).
*/
extern void __ashldi3(void);
extern void __ashrdi3(void);
extern void __divsi3(void);
extern void __lshrdi3(void);
extern void __modsi3(void);
extern void __muldi3(void);
extern void __ucmpdi2(void);
extern void __udivsi3(void);
extern void __umodsi3(void);
extern void __do_div64(void);
extern void __bswapsi2(void);
extern void __bswapdi2(void);
extern void __aeabi_idiv(void);
extern void __aeabi_idivmod(void);
extern void __aeabi_lasr(void);
extern void __aeabi_llsl(void);
extern void __aeabi_llsr(void);
extern void __aeabi_lmul(void);
extern void __aeabi_uidiv(void);
extern void __aeabi_uidivmod(void);
extern void __aeabi_ulcmp(void);
extern void fpundefinstr(void);
void mmioset(void *, unsigned int, size_t);
void mmiocpy(void *, const void *, size_t);
/* platform dependent support */
EXPORT_SYMBOL(arm_delay_ops);
/* networking */
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_from_user);
EXPORT_SYMBOL(csum_partial_copy_nocheck);
EXPORT_SYMBOL(__csum_ipv6_magic);
/* io */
#ifndef __raw_readsb
EXPORT_SYMBOL(__raw_readsb);
#endif
#ifndef __raw_readsw
EXPORT_SYMBOL(__raw_readsw);
#endif
#ifndef __raw_readsl
EXPORT_SYMBOL(__raw_readsl);
#endif
#ifndef __raw_writesb
EXPORT_SYMBOL(__raw_writesb);
#endif
#ifndef __raw_writesw
EXPORT_SYMBOL(__raw_writesw);
#endif
#ifndef __raw_writesl
EXPORT_SYMBOL(__raw_writesl);
#endif
/* string / mem functions */
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(__memzero);
EXPORT_SYMBOL(mmioset);
EXPORT_SYMBOL(mmiocpy);
#ifdef CONFIG_MMU
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(arm_copy_from_user);
EXPORT_SYMBOL(arm_copy_to_user);
EXPORT_SYMBOL(arm_clear_user);
EXPORT_SYMBOL(__get_user_1);
EXPORT_SYMBOL(__get_user_2);
EXPORT_SYMBOL(__get_user_4);
EXPORT_SYMBOL(__get_user_8);
#ifdef __ARMEB__
EXPORT_SYMBOL(__get_user_64t_1);
EXPORT_SYMBOL(__get_user_64t_2);
EXPORT_SYMBOL(__get_user_64t_4);
EXPORT_SYMBOL(__get_user_32t_8);
#endif
EXPORT_SYMBOL(__put_user_1);
EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
#endif
/* gcc lib functions */
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__divsi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__modsi3);
EXPORT_SYMBOL(__muldi3);
EXPORT_SYMBOL(__ucmpdi2);
EXPORT_SYMBOL(__udivsi3);
EXPORT_SYMBOL(__umodsi3);
EXPORT_SYMBOL(__do_div64);
EXPORT_SYMBOL(__bswapsi2);
EXPORT_SYMBOL(__bswapdi2);
#ifdef CONFIG_AEABI
EXPORT_SYMBOL(__aeabi_idiv);
EXPORT_SYMBOL(__aeabi_idivmod);
EXPORT_SYMBOL(__aeabi_lasr);
EXPORT_SYMBOL(__aeabi_llsl);
EXPORT_SYMBOL(__aeabi_llsr);
EXPORT_SYMBOL(__aeabi_lmul);
EXPORT_SYMBOL(__aeabi_uidiv);
EXPORT_SYMBOL(__aeabi_uidivmod);
EXPORT_SYMBOL(__aeabi_ulcmp);
#endif
/* bitops */
EXPORT_SYMBOL(_set_bit);
EXPORT_SYMBOL(_test_and_set_bit);
EXPORT_SYMBOL(_clear_bit);
EXPORT_SYMBOL(_test_and_clear_bit);
EXPORT_SYMBOL(_change_bit);
EXPORT_SYMBOL(_test_and_change_bit);
EXPORT_SYMBOL(_find_first_zero_bit_le);
EXPORT_SYMBOL(_find_next_zero_bit_le);
EXPORT_SYMBOL(_find_first_bit_le);
EXPORT_SYMBOL(_find_next_bit_le);
#ifdef __ARMEB__
EXPORT_SYMBOL(_find_first_zero_bit_be);
EXPORT_SYMBOL(_find_next_zero_bit_be);
EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_OLD_MCOUNT
EXPORT_SYMBOL(mcount);
#endif
EXPORT_SYMBOL(__gnu_mcount_nc);
#endif
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
EXPORT_SYMBOL(__pv_phys_pfn_offset);
EXPORT_SYMBOL(__pv_offset);
#endif
#ifdef CONFIG_HAVE_ARM_SMCCC
EXPORT_SYMBOL(arm_smccc_smc);
EXPORT_SYMBOL(arm_smccc_hvc);
#endif

View File

@@ -7,7 +7,6 @@
#include <asm/assembler.h>
#include <asm/ftrace.h>
#include <asm/unwind.h>
#include <asm/export.h>
#include "entry-header.S"
@@ -154,7 +153,6 @@ ENTRY(mcount)
__mcount _old
#endif
ENDPROC(mcount)
EXPORT_SYMBOL(mcount)
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(ftrace_caller_old)
@@ -207,7 +205,6 @@ UNWIND(.fnstart)
#endif
UNWIND(.fnend)
ENDPROC(__gnu_mcount_nc)
EXPORT_SYMBOL(__gnu_mcount_nc)
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(ftrace_caller)

View File

@@ -22,7 +22,6 @@
#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/pgtable.h>
#include <asm/export.h>
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
#include CONFIG_DEBUG_LL_INCLUDE
@@ -728,8 +727,6 @@ __pv_phys_pfn_offset:
__pv_offset:
.quad 0
.size __pv_offset, . -__pv_offset
EXPORT_SYMBOL(__pv_phys_pfn_offset)
EXPORT_SYMBOL(__pv_offset)
#endif
#include "head-common.S"

View File

@@ -16,7 +16,6 @@
#include <asm/opcodes-sec.h>
#include <asm/opcodes-virt.h>
#include <asm/unwind.h>
#include <asm/export.h>
/*
* Wrap c macros in asm macros to delay expansion until after the
@@ -52,7 +51,6 @@ UNWIND( .fnend)
ENTRY(arm_smccc_smc)
SMCCC SMCCC_SMC
ENDPROC(arm_smccc_smc)
EXPORT_SYMBOL(arm_smccc_smc)
/*
* void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
@@ -62,4 +60,3 @@ EXPORT_SYMBOL(arm_smccc_smc)
ENTRY(arm_smccc_hvc)
SMCCC SMCCC_HVC
ENDPROC(arm_smccc_hvc)
EXPORT_SYMBOL(arm_smccc_hvc)

View File

@@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
void dump_backtrace_stm(u32 *stack, u32 instruction)
{
char str[80], *p;
unsigned int x;
int reg;
for (reg = 10, x = 0, p = str; reg >= 0; reg--) {
if (instruction & BIT(reg)) {
p += sprintf(p, " r%d:%08x", reg, *stack--);
if (++x == 6) {
x = 0;
p = str;
printk("%s\n", str);
}
}
}
if (p != str)
printk("%s\n", str);
}
#ifndef CONFIG_ARM_UNWIND
/*
* Stack pointers should always be within the kernels view of

View File

@@ -3,6 +3,9 @@
* Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*/
/* No __ro_after_init data in the .rodata section - which will always be ro */
#define RO_AFTER_INIT_DATA
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
@@ -223,6 +226,8 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
__init_end = .;
*(.data..ro_after_init)
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
READ_MOSTLY_DATA(L1_CACHE_BYTES)

View File

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA. */
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
#ifdef __ARMEB__
#define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_llsl)
ENDPROC(__ashldi3)
ENDPROC(__aeabi_llsl)
EXPORT_SYMBOL(__ashldi3)
EXPORT_SYMBOL(__aeabi_llsl)

View File

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA. */
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
#ifdef __ARMEB__
#define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_lasr)
ENDPROC(__ashrdi3)
ENDPROC(__aeabi_lasr)
EXPORT_SYMBOL(__ashrdi3)
EXPORT_SYMBOL(__aeabi_lasr)

View File

@@ -10,6 +10,7 @@
* 27/03/03 Ian Molton Clean up CONFIG_CPU
*
*/
#include <linux/kern_levels.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
.text
@@ -83,13 +84,13 @@ for_each_frame: tst frame, mask @ Check for address exceptions
teq r3, r1, lsr #11
ldreq r0, [frame, #-8] @ get sp
subeq r0, r0, #4 @ point at the last arg
bleq .Ldumpstm @ dump saved registers
bleq dump_backtrace_stm @ dump saved registers
1004: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, ip, lr, pc}
ldr r3, .Ldsi @ instruction exists,
teq r3, r1, lsr #11
subeq r0, frame, #16
bleq .Ldumpstm @ dump saved registers
bleq dump_backtrace_stm @ dump saved registers
teq sv_fp, #0 @ zero saved fp means
beq no_frame @ no further frames
@@ -112,38 +113,6 @@ ENDPROC(c_backtrace)
.long 1004b, 1006b
.popsection
#define instr r4
#define reg r5
#define stack r6
.Ldumpstm: stmfd sp!, {instr, reg, stack, r7, lr}
mov stack, r0
mov instr, r1
mov reg, #10
mov r7, #0
1: mov r3, #1
ARM( tst instr, r3, lsl reg )
THUMB( lsl r3, reg )
THUMB( tst instr, r3 )
beq 2f
add r7, r7, #1
teq r7, #6
moveq r7, #0
adr r3, .Lcr
addne r3, r3, #1 @ skip newline
ldr r2, [stack], #-4
mov r1, reg
adr r0, .Lfp
bl printk
2: subs reg, reg, #1
bpl 1b
teq r7, #0
adrne r0, .Lcr
blne printk
ldmfd sp!, {instr, reg, stack, r7, pc}
.Lfp: .asciz " r%d:%08x%s"
.Lcr: .asciz "\n"
.Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n"
.align
.Ldsi: .word 0xe92dd800 >> 11 @ stmfd sp!, {... fp, ip, lr, pc}

View File

@@ -1,6 +1,5 @@
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
#if __LINUX_ARM_ARCH__ >= 6
.macro bitop, name, instr
@@ -26,7 +25,6 @@ UNWIND( .fnstart )
bx lr
UNWIND( .fnend )
ENDPROC(\name )
EXPORT_SYMBOL(\name )
.endm
.macro testop, name, instr, store
@@ -57,7 +55,6 @@ UNWIND( .fnstart )
2: bx lr
UNWIND( .fnend )
ENDPROC(\name )
EXPORT_SYMBOL(\name )
.endm
#else
.macro bitop, name, instr
@@ -77,7 +74,6 @@ UNWIND( .fnstart )
ret lr
UNWIND( .fnend )
ENDPROC(\name )
EXPORT_SYMBOL(\name )
.endm
/**
@@ -106,6 +102,5 @@ UNWIND( .fnstart )
ret lr
UNWIND( .fnend )
ENDPROC(\name )
EXPORT_SYMBOL(\name )
.endm
#endif

View File

@@ -1,6 +1,5 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
#if __LINUX_ARM_ARCH__ >= 6
ENTRY(__bswapsi2)
@@ -36,5 +35,3 @@ ENTRY(__bswapdi2)
ret lr
ENDPROC(__bswapdi2)
#endif
EXPORT_SYMBOL(__bswapsi2)
EXPORT_SYMBOL(__bswapdi2)

View File

@@ -10,7 +10,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
.text
@@ -51,9 +50,6 @@ USER( strnebt r2, [r0])
UNWIND(.fnend)
ENDPROC(arm_clear_user)
ENDPROC(__clear_user_std)
#ifndef CONFIG_UACCESS_WITH_MEMCPY
EXPORT_SYMBOL(arm_clear_user)
#endif
.pushsection .text.fixup,"ax"
.align 0

View File

@@ -13,7 +13,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
/*
* Prototype:
@@ -95,7 +94,6 @@ ENTRY(arm_copy_from_user)
#include "copy_template.S"
ENDPROC(arm_copy_from_user)
EXPORT_SYMBOL(arm_copy_from_user)
.pushsection .fixup,"ax"
.align 0

View File

@@ -13,7 +13,6 @@
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include <asm/export.h>
#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
@@ -46,4 +45,3 @@ ENTRY(copy_page)
PLD( beq 2b )
ldmfd sp!, {r4, pc} @ 3
ENDPROC(copy_page)
EXPORT_SYMBOL(copy_page)

View File

@@ -13,7 +13,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
/*
* Prototype:
@@ -100,9 +99,6 @@ WEAK(arm_copy_to_user)
ENDPROC(arm_copy_to_user)
ENDPROC(__copy_to_user_std)
#ifndef CONFIG_UACCESS_WITH_MEMCPY
EXPORT_SYMBOL(arm_copy_to_user)
#endif
.pushsection .text.fixup,"ax"
.align 0

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.text
@@ -31,4 +30,4 @@ ENTRY(__csum_ipv6_magic)
adcs r0, r0, #0
ldmfd sp!, {pc}
ENDPROC(__csum_ipv6_magic)
EXPORT_SYMBOL(__csum_ipv6_magic)

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.text
@@ -141,4 +140,3 @@ ENTRY(csum_partial)
bne 4b
b .Lless4
ENDPROC(csum_partial)
EXPORT_SYMBOL(csum_partial)

View File

@@ -49,6 +49,5 @@
#define FN_ENTRY ENTRY(csum_partial_copy_nocheck)
#define FN_EXIT ENDPROC(csum_partial_copy_nocheck)
#define FN_EXPORT EXPORT_SYMBOL(csum_partial_copy_nocheck)
#include "csumpartialcopygeneric.S"

View File

@@ -8,7 +8,6 @@
* published by the Free Software Foundation.
*/
#include <asm/assembler.h>
#include <asm/export.h>
/*
* unsigned int
@@ -332,4 +331,3 @@ FN_ENTRY
mov r5, r4, get_byte_1
b .Lexit
FN_EXIT
FN_EXPORT

View File

@@ -73,7 +73,6 @@
#define FN_ENTRY ENTRY(csum_partial_copy_from_user)
#define FN_EXIT ENDPROC(csum_partial_copy_from_user)
#define FN_EXPORT EXPORT_SYMBOL(csum_partial_copy_from_user)
#include "csumpartialcopygeneric.S"

View File

@@ -24,7 +24,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/timex.h>
/*
@@ -35,7 +34,6 @@ struct arm_delay_ops arm_delay_ops __ro_after_init = {
.const_udelay = __loop_const_udelay,
.udelay = __loop_udelay,
};
EXPORT_SYMBOL(arm_delay_ops);
static const struct delay_timer *delay_timer;
static bool delay_calibrated;

View File

@@ -15,7 +15,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
#ifdef __ARMEB__
#define xh r0
@@ -211,4 +210,3 @@ Ldiv0_64:
UNWIND(.fnend)
ENDPROC(__do_div64)
EXPORT_SYMBOL(__do_div64)

View File

@@ -15,7 +15,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.text
/*
@@ -38,7 +37,6 @@ ENTRY(_find_first_zero_bit_le)
3: mov r0, r1 @ no free bits
ret lr
ENDPROC(_find_first_zero_bit_le)
EXPORT_SYMBOL(_find_first_zero_bit_le)
/*
* Purpose : Find next 'zero' bit
@@ -59,7 +57,6 @@ ENTRY(_find_next_zero_bit_le)
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
ENDPROC(_find_next_zero_bit_le)
EXPORT_SYMBOL(_find_next_zero_bit_le)
/*
* Purpose : Find a 'one' bit
@@ -81,7 +78,6 @@ ENTRY(_find_first_bit_le)
3: mov r0, r1 @ no free bits
ret lr
ENDPROC(_find_first_bit_le)
EXPORT_SYMBOL(_find_first_bit_le)
/*
* Purpose : Find next 'one' bit
@@ -101,7 +97,6 @@ ENTRY(_find_next_bit_le)
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
ENDPROC(_find_next_bit_le)
EXPORT_SYMBOL(_find_next_bit_le)
#ifdef __ARMEB__
@@ -121,7 +116,6 @@ ENTRY(_find_first_zero_bit_be)
3: mov r0, r1 @ no free bits
ret lr
ENDPROC(_find_first_zero_bit_be)
EXPORT_SYMBOL(_find_first_zero_bit_be)
ENTRY(_find_next_zero_bit_be)
teq r1, #0
@@ -139,7 +133,6 @@ ENTRY(_find_next_zero_bit_be)
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
ENDPROC(_find_next_zero_bit_be)
EXPORT_SYMBOL(_find_next_zero_bit_be)
ENTRY(_find_first_bit_be)
teq r1, #0
@@ -157,7 +150,6 @@ ENTRY(_find_first_bit_be)
3: mov r0, r1 @ no free bits
ret lr
ENDPROC(_find_first_bit_be)
EXPORT_SYMBOL(_find_first_bit_be)
ENTRY(_find_next_bit_be)
teq r1, #0
@@ -174,7 +166,6 @@ ENTRY(_find_next_bit_be)
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
ENDPROC(_find_next_bit_be)
EXPORT_SYMBOL(_find_next_bit_be)
#endif

View File

@@ -31,7 +31,6 @@
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
#include <asm/export.h>
ENTRY(__get_user_1)
check_uaccess r0, 1, r1, r2, __get_user_bad
@@ -39,7 +38,6 @@ ENTRY(__get_user_1)
mov r0, #0
ret lr
ENDPROC(__get_user_1)
EXPORT_SYMBOL(__get_user_1)
ENTRY(__get_user_2)
check_uaccess r0, 2, r1, r2, __get_user_bad
@@ -60,7 +58,6 @@ rb .req r0
mov r0, #0
ret lr
ENDPROC(__get_user_2)
EXPORT_SYMBOL(__get_user_2)
ENTRY(__get_user_4)
check_uaccess r0, 4, r1, r2, __get_user_bad
@@ -68,7 +65,6 @@ ENTRY(__get_user_4)
mov r0, #0
ret lr
ENDPROC(__get_user_4)
EXPORT_SYMBOL(__get_user_4)
ENTRY(__get_user_8)
check_uaccess r0, 8, r1, r2, __get_user_bad
@@ -82,7 +78,6 @@ ENTRY(__get_user_8)
mov r0, #0
ret lr
ENDPROC(__get_user_8)
EXPORT_SYMBOL(__get_user_8)
#ifdef __ARMEB__
ENTRY(__get_user_32t_8)
@@ -96,7 +91,6 @@ ENTRY(__get_user_32t_8)
mov r0, #0
ret lr
ENDPROC(__get_user_32t_8)
EXPORT_SYMBOL(__get_user_32t_8)
ENTRY(__get_user_64t_1)
check_uaccess r0, 1, r1, r2, __get_user_bad8
@@ -104,7 +98,6 @@ ENTRY(__get_user_64t_1)
mov r0, #0
ret lr
ENDPROC(__get_user_64t_1)
EXPORT_SYMBOL(__get_user_64t_1)
ENTRY(__get_user_64t_2)
check_uaccess r0, 2, r1, r2, __get_user_bad8
@@ -121,7 +114,6 @@ rb .req r0
mov r0, #0
ret lr
ENDPROC(__get_user_64t_2)
EXPORT_SYMBOL(__get_user_64t_2)
ENTRY(__get_user_64t_4)
check_uaccess r0, 4, r1, r2, __get_user_bad8
@@ -129,7 +121,6 @@ ENTRY(__get_user_64t_4)
mov r0, #0
ret lr
ENDPROC(__get_user_64t_4)
EXPORT_SYMBOL(__get_user_64t_4)
#endif
__get_user_bad8:

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.Linsb_align: rsb ip, ip, #4
cmp ip, r2
@@ -122,4 +121,3 @@ ENTRY(__raw_readsb)
ldmfd sp!, {r4 - r6, pc}
ENDPROC(__raw_readsb)
EXPORT_SYMBOL(__raw_readsb)

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
ENTRY(__raw_readsl)
teq r2, #0 @ do we have to check for the zero len?
@@ -78,4 +77,3 @@ ENTRY(__raw_readsl)
strb r3, [r1, #0]
ret lr
ENDPROC(__raw_readsl)
EXPORT_SYMBOL(__raw_readsl)

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.Linsw_bad_alignment:
adr r0, .Linsw_bad_align_msg
@@ -104,4 +103,4 @@ ENTRY(__raw_readsw)
ldmfd sp!, {r4, r5, r6, pc}
EXPORT_SYMBOL(__raw_readsw)

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.macro pack, rd, hw1, hw2
#ifndef __ARMEB__
@@ -130,4 +129,3 @@ ENTRY(__raw_readsw)
strneb ip, [r1]
ldmfd sp!, {r4, pc}
ENDPROC(__raw_readsw)
EXPORT_SYMBOL(__raw_readsw)

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.macro outword, rd
#ifndef __ARMEB__
@@ -93,4 +92,3 @@ ENTRY(__raw_writesb)
ldmfd sp!, {r4, r5, pc}
ENDPROC(__raw_writesb)
EXPORT_SYMBOL(__raw_writesb)

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
ENTRY(__raw_writesl)
teq r2, #0 @ do we have to check for the zero len?
@@ -66,4 +65,3 @@ ENTRY(__raw_writesl)
bne 6b
ret lr
ENDPROC(__raw_writesl)
EXPORT_SYMBOL(__raw_writesl)

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.Loutsw_bad_alignment:
adr r0, .Loutsw_bad_align_msg
@@ -125,4 +124,3 @@ ENTRY(__raw_writesw)
strne ip, [r0]
ldmfd sp!, {r4, r5, r6, pc}
EXPORT_SYMBOL(__raw_writesw)

View File

@@ -9,7 +9,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.macro outword, rd
#ifndef __ARMEB__
@@ -99,4 +98,3 @@ ENTRY(__raw_writesw)
strneh ip, [r0]
ret lr
ENDPROC(__raw_writesw)
EXPORT_SYMBOL(__raw_writesw)

View File

@@ -36,7 +36,6 @@ Boston, MA 02111-1307, USA. */
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
.macro ARM_DIV_BODY dividend, divisor, result, curbit
@@ -239,8 +238,6 @@ UNWIND(.fnstart)
UNWIND(.fnend)
ENDPROC(__udivsi3)
ENDPROC(__aeabi_uidiv)
EXPORT_SYMBOL(__udivsi3)
EXPORT_SYMBOL(__aeabi_uidiv)
ENTRY(__umodsi3)
UNWIND(.fnstart)
@@ -259,7 +256,6 @@ UNWIND(.fnstart)
UNWIND(.fnend)
ENDPROC(__umodsi3)
EXPORT_SYMBOL(__umodsi3)
#ifdef CONFIG_ARM_PATCH_IDIV
.align 3
@@ -307,8 +303,6 @@ UNWIND(.fnstart)
UNWIND(.fnend)
ENDPROC(__divsi3)
ENDPROC(__aeabi_idiv)
EXPORT_SYMBOL(__divsi3)
EXPORT_SYMBOL(__aeabi_idiv)
ENTRY(__modsi3)
UNWIND(.fnstart)
@@ -333,7 +327,6 @@ UNWIND(.fnstart)
UNWIND(.fnend)
ENDPROC(__modsi3)
EXPORT_SYMBOL(__modsi3)
#ifdef CONFIG_AEABI
@@ -350,7 +343,6 @@ UNWIND(.save {r0, r1, ip, lr} )
UNWIND(.fnend)
ENDPROC(__aeabi_uidivmod)
EXPORT_SYMBOL(__aeabi_uidivmod)
ENTRY(__aeabi_idivmod)
UNWIND(.fnstart)
@@ -364,7 +356,6 @@ UNWIND(.save {r0, r1, ip, lr} )
UNWIND(.fnend)
ENDPROC(__aeabi_idivmod)
EXPORT_SYMBOL(__aeabi_idivmod)
#endif

View File

@@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA. */
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
#ifdef __ARMEB__
#define al r1
@@ -53,5 +52,3 @@ ENTRY(__aeabi_llsr)
ENDPROC(__lshrdi3)
ENDPROC(__aeabi_llsr)
EXPORT_SYMBOL(__lshrdi3)
EXPORT_SYMBOL(__aeabi_llsr)

View File

@@ -11,7 +11,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.text
.align 5
@@ -25,4 +24,3 @@ ENTRY(memchr)
2: movne r0, #0
ret lr
ENDPROC(memchr)
EXPORT_SYMBOL(memchr)

View File

@@ -13,7 +13,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
#define LDR1W_SHIFT 0
#define STR1W_SHIFT 0
@@ -69,5 +68,3 @@ ENTRY(memcpy)
ENDPROC(memcpy)
ENDPROC(mmiocpy)
EXPORT_SYMBOL(memcpy)
EXPORT_SYMBOL(mmiocpy)

View File

@@ -13,7 +13,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
.text
@@ -226,4 +225,3 @@ ENTRY(memmove)
18: backward_copy_shift push=24 pull=8
ENDPROC(memmove)
EXPORT_SYMBOL(memmove)

View File

@@ -12,7 +12,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
.text
.align 5
@@ -136,5 +135,3 @@ UNWIND( .fnstart )
UNWIND( .fnend )
ENDPROC(memset)
ENDPROC(mmioset)
EXPORT_SYMBOL(memset)
EXPORT_SYMBOL(mmioset)

View File

@@ -10,7 +10,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
#include <asm/export.h>
.text
.align 5
@@ -136,4 +135,3 @@ UNWIND( .fnstart )
ret lr @ 1
UNWIND( .fnend )
ENDPROC(__memzero)
EXPORT_SYMBOL(__memzero)

View File

@@ -12,7 +12,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
#ifdef __ARMEB__
#define xh r0
@@ -47,5 +46,3 @@ ENTRY(__aeabi_lmul)
ENDPROC(__muldi3)
ENDPROC(__aeabi_lmul)
EXPORT_SYMBOL(__muldi3)
EXPORT_SYMBOL(__aeabi_lmul)

View File

@@ -31,7 +31,6 @@
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/domain.h>
#include <asm/export.h>
ENTRY(__put_user_1)
check_uaccess r0, 1, r1, ip, __put_user_bad
@@ -39,7 +38,6 @@ ENTRY(__put_user_1)
mov r0, #0
ret lr
ENDPROC(__put_user_1)
EXPORT_SYMBOL(__put_user_1)
ENTRY(__put_user_2)
check_uaccess r0, 2, r1, ip, __put_user_bad
@@ -64,7 +62,6 @@ ENTRY(__put_user_2)
mov r0, #0
ret lr
ENDPROC(__put_user_2)
EXPORT_SYMBOL(__put_user_2)
ENTRY(__put_user_4)
check_uaccess r0, 4, r1, ip, __put_user_bad
@@ -72,7 +69,6 @@ ENTRY(__put_user_4)
mov r0, #0
ret lr
ENDPROC(__put_user_4)
EXPORT_SYMBOL(__put_user_4)
ENTRY(__put_user_8)
check_uaccess r0, 8, r1, ip, __put_user_bad
@@ -86,7 +82,6 @@ ENTRY(__put_user_8)
mov r0, #0
ret lr
ENDPROC(__put_user_8)
EXPORT_SYMBOL(__put_user_8)
__put_user_bad:
mov r0, #-EFAULT

View File

@@ -11,7 +11,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.text
.align 5
@@ -26,4 +25,3 @@ ENTRY(strchr)
subeq r0, r0, #1
ret lr
ENDPROC(strchr)
EXPORT_SYMBOL(strchr)

View File

@@ -11,7 +11,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
.text
.align 5
@@ -25,4 +24,3 @@ ENTRY(strrchr)
mov r0, r3
ret lr
ENDPROC(strrchr)
EXPORT_SYMBOL(strrchr)

View File

@@ -19,7 +19,6 @@
#include <linux/gfp.h>
#include <linux/highmem.h>
#include <linux/hugetlb.h>
#include <linux/export.h>
#include <asm/current.h>
#include <asm/page.h>
@@ -157,7 +156,6 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n)
}
return n;
}
EXPORT_SYMBOL(arm_copy_to_user);
static unsigned long noinline
__clear_user_memset(void __user *addr, unsigned long n)
@@ -215,7 +213,6 @@ unsigned long arm_clear_user(void __user *addr, unsigned long n)
}
return n;
}
EXPORT_SYMBOL(arm_clear_user);
#if 0

View File

@@ -12,7 +12,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
#ifdef __ARMEB__
#define xh r0
@@ -36,7 +35,6 @@ ENTRY(__ucmpdi2)
ret lr
ENDPROC(__ucmpdi2)
EXPORT_SYMBOL(__ucmpdi2)
#ifdef CONFIG_AEABI
@@ -50,7 +48,6 @@ ENTRY(__aeabi_ulcmp)
ret lr
ENDPROC(__aeabi_ulcmp)
EXPORT_SYMBOL(__aeabi_ulcmp)
#endif

View File

@@ -32,6 +32,7 @@ endif
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
endif
# i.MX21 based machines

View File

@@ -0,0 +1,20 @@
/*
* Exported ksyms for the SSI FIQ handler
*
* Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/platform_data/asoc-imx-ssi.h>
EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
EXPORT_SYMBOL(imx_ssi_fiq_start);
EXPORT_SYMBOL(imx_ssi_fiq_end);
EXPORT_SYMBOL(imx_ssi_fiq_base);

View File

@@ -8,7 +8,6 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/export.h>
/*
* r8 = bit 0-15: tx offset, bit 16-31: tx buffer size
@@ -145,8 +144,4 @@ imx_ssi_fiq_tx_buffer:
.word 0x0
.L_imx_ssi_fiq_end:
imx_ssi_fiq_end:
EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer)
EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer)
EXPORT_SYMBOL(imx_ssi_fiq_start)
EXPORT_SYMBOL(imx_ssi_fiq_end)
EXPORT_SYMBOL(imx_ssi_fiq_base)

View File

@@ -71,6 +71,7 @@ config SOC_AM43XX
select HAVE_ARM_TWD
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select OMAP_INTERCONNECT
config SOC_DRA7XX
bool "TI DRA7XX"

View File

@@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void)
#define OMAP3_SHOW_FEATURE(feat) \
if (omap3_has_ ##feat()) \
printk(#feat" ");
n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
static void __init omap3_cpuinfo(void)
{
const char *cpu_name;
char buf[64];
int n = 0;
memset(buf, 0, sizeof(buf));
/*
* OMAP3430 and OMAP3530 are assumed to be same.
@@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void)
cpu_name = "OMAP3503";
}
sprintf(soc_name, "%s", cpu_name);
scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name);
/* Print verbose information */
pr_info("%s %s (", soc_name, soc_rev);
n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev);
OMAP3_SHOW_FEATURE(l2cache);
OMAP3_SHOW_FEATURE(iva);
@@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void)
OMAP3_SHOW_FEATURE(neon);
OMAP3_SHOW_FEATURE(isp);
OMAP3_SHOW_FEATURE(192mhz_clk);
printk(")\n");
if (*(buf + n - 1) == ' ')
n--;
n += scnprintf(buf + n, sizeof(buf) - n, ")\n");
pr_info("%s", buf);
}
#define OMAP3_CHECK_FEATURE(status,feat) \

View File

@@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
if (has_uart4) {
en_uart4_mask = OMAP3630_EN_UART4_MASK;
grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
} else {
en_uart4_mask = 0;
grpsel_uart4_mask = 0;
}
/* Enable wakeups in PER */

View File

@@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm,
return -ENODATA;
}
if (!voltdm->volt_data) {
pr_err("%s: No voltage data defined for vdd_%s\n",
__func__, voltdm->name);
return -ENODATA;
}
/* Adjust voltage to the exact voltage from the OPP table */
for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
if (voltdm->volt_data[i].volt_nominal >= target_volt) {

View File

@@ -1167,7 +1167,7 @@ static int __init dma_debug_do_init(void)
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
return 0;
}
fs_initcall(dma_debug_do_init);
core_initcall(dma_debug_do_init);
#ifdef CONFIG_ARM_DMA_USE_IOMMU

View File

@@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin)
ret lr
ENDPROC(cpu_cm7_proc_fin)
.section ".text.init", #alloc, #execinstr
.section ".init.text", #alloc, #execinstr
__v7m_cm7_setup:
mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)