Documentation: update broken web addresses.

Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/arm/SA1100/Assabet

@@ -2,8 +2,7 @@ The Intel Assabet (SA-1110 evaluation) board
 ============================================
 
 Please see:
-http://developer.intel.com/design/strong/quicklist/eval-plat/sa-1110.htm
-http://developer.intel.com/design/strong/guides/278278.htm
+http://developer.intel.com
 
 Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>:
 http://www.cs.cmu.edu/~wearable/software/assabet.html
@@ -64,7 +63,7 @@ Initial RedBoot configuration
 -----------------------------
 
 The commands used here are explained in The RedBoot User's Guide available
-on-line at http://sources.redhat.com/ecos/docs-latest/redboot/redboot.html.
+on-line at http://sources.redhat.com/ecos/docs.html.
 Please refer to it for explanations.
 
 If you have a CF network card (my Assabet kit contained a CF+ LP-E from

Documentation/arm/SA1100/Brutus

@@ -1,7 +1,7 @@
 Brutus is an evaluation platform for the SA1100 manufactured by Intel.  
 For more details, see:
 
-http://developer.intel.com/design/strong/applnots/sa1100lx/getstart.htm
+http://developer.intel.com
 
 To compile for Brutus, you must issue the following commands:
 

Documentation/arm/SA1100/FreeBird

@@ -1,5 +1,5 @@
 Freebird-1.1 is produced by Legned(C) ,Inc.
-(http://www.legend.com.cn)
+http://web.archive.org/web/*/http://www.legend.com.cn
 and software/linux mainatined by Coventive(C),Inc.
 (http://www.coventive.com)
 

Documentation/arm/SA1100/GraphicsClient

@@ -71,7 +71,7 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 - Smart I/O (ADC, keypad, digital inputs, etc)
-  See http://www.applieddata.com/developers/linux for IOCTL documentation
+  See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
 To do:

Documentation/arm/SA1100/GraphicsMaster

@@ -28,7 +28,7 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 - Smart I/O (ADC, keypad, digital inputs, etc)
-  See http://www.applieddata.com/developers/linux for IOCTL documentation
+  See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
 To do:

Documentation/arm/SA1100/Itsy

@@ -4,7 +4,7 @@ research projects at Compaq that are related to pocket computing.
 
 For more information, see:
 
-	http://www.research.digital.com/wrl/itsy/index.html
+	http://www.hpl.hp.com/downloads/crl/itsy/
 
 Notes on initial 2.4 Itsy support (8/27/2000) :
 The port was done on an Itsy version 1.5 machine with a daughtercard with

Documentation/arm/SA1100/PLEB

@@ -6,6 +6,6 @@ PLEB support has yet to be fully integrated.
 
 For more information, see:
 
-	http://www.cse.unsw.edu.au/~pleb/
+	http://www.cse.unsw.edu.au
 
 

Documentation/arm/SA1100/Victor

@@ -3,7 +3,7 @@ VisuAide, Inc. to be used by blind people.
 
 For more information related to Victor, see:
 
-	http://www.visuaide.com/victor
+	http://www.humanware.com/en-usa/products
 
 Of course Victor is using Linux as its main operating system.
 The Victor implementation for Linux is maintained by Nicolas Pitre:

Documentation/arm/SA1100/nanoEngine

@@ -7,5 +7,5 @@ for more info.
 (Ref: Stuart Adams <sja@brightstareng.com>)
 
 Also visit Larry Doolittle's "Linux for the nanoEngine" site:
-http://recycle.lbl.gov/~ldoolitt/bse/
+http://www.brightstareng.com/arm/nanoeng.htm