Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

The conflicts were two cases of overlapping changes in
batman-adv and the qed driver.

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/ibm/emac/core.c

@@ -343,6 +343,7 @@ static int emac_reset(struct emac_instance *dev)
 {
 	struct emac_regs __iomem *p = dev->emacp;
 	int n = 20;
+	bool __maybe_unused try_internal_clock = false;
 
 	DBG(dev, "reset" NL);
 
@@ -355,6 +356,7 @@ static int emac_reset(struct emac_instance *dev)
 	}
 
 #ifdef CONFIG_PPC_DCR_NATIVE
+do_retry:
 	/*
 	 * PPC460EX/GT Embedded Processor Advanced User's Manual
 	 * section 28.10.1 Mode Register 0 (EMACx_MR0) states:
@@ -362,10 +364,19 @@ static int emac_reset(struct emac_instance *dev)
 	 * of the EMAC. If none is present, select the internal clock
 	 * (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1).
 	 * After a soft reset, select the external clock.
+	 *
+	 * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the
+	 * ethernet cable is not attached. This causes the reset to timeout
+	 * and the PHY detection code in emac_init_phy() is unable to
+	 * communicate and detect the AR8035-A PHY. As a result, the emac
+	 * driver bails out early and the user has no ethernet.
+	 * In order to stay compatible with existing configurations, the
+	 * driver will temporarily switch to the internal clock, after
+	 * the first reset fails.
 	 */
 	if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
-		if (dev->phy_address == 0xffffffff &&
-		    dev->phy_map == 0xffffffff) {
+		if (try_internal_clock || (dev->phy_address == 0xffffffff &&
+					   dev->phy_map == 0xffffffff)) {
 			/* No PHY: select internal loop clock before reset */
 			dcri_clrset(SDR0, SDR0_ETH_CFG,
 				    0, SDR0_ETH_CFG_ECS << dev->cell_index);
@@ -383,8 +394,15 @@ static int emac_reset(struct emac_instance *dev)
 
 #ifdef CONFIG_PPC_DCR_NATIVE
 	if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) {
-		if (dev->phy_address == 0xffffffff &&
-		    dev->phy_map == 0xffffffff) {
+		if (!n && !try_internal_clock) {
+			/* first attempt has timed out. */
+			n = 20;
+			try_internal_clock = true;
+			goto do_retry;
+		}
+
+		if (try_internal_clock || (dev->phy_address == 0xffffffff &&
+					   dev->phy_map == 0xffffffff)) {
 			/* No PHY: restore external clock source after reset */
 			dcri_clrset(SDR0, SDR0_ETH_CFG,
 				    SDR0_ETH_CFG_ECS << dev->cell_index, 0);
@@ -2460,20 +2478,24 @@ static int emac_mii_bus_reset(struct mii_bus *bus)
 	return emac_reset(dev);
 }
 
+static int emac_mdio_phy_start_aneg(struct mii_phy *phy,
+				    struct phy_device *phy_dev)
+{
+	phy_dev->autoneg = phy->autoneg;
+	phy_dev->speed = phy->speed;
+	phy_dev->duplex = phy->duplex;
+	phy_dev->advertising = phy->advertising;
+	return phy_start_aneg(phy_dev);
+}
+
 static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
 {
 	struct net_device *ndev = phy->dev;
 	struct emac_instance *dev = netdev_priv(ndev);
 
-	dev->phy.autoneg = AUTONEG_ENABLE;
-	dev->phy.speed = SPEED_1000;
-	dev->phy.duplex = DUPLEX_FULL;
-	dev->phy.advertising = advertise;
 	phy->autoneg = AUTONEG_ENABLE;
-	phy->speed = dev->phy.speed;
-	phy->duplex = dev->phy.duplex;
 	phy->advertising = advertise;
-	return phy_start_aneg(dev->phy_dev);
+	return emac_mdio_phy_start_aneg(phy, dev->phy_dev);
 }
 
 static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
@@ -2481,13 +2503,10 @@ static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
 	struct net_device *ndev = phy->dev;
 	struct emac_instance *dev = netdev_priv(ndev);
 
-	dev->phy.autoneg =  AUTONEG_DISABLE;
-	dev->phy.speed = speed;
-	dev->phy.duplex = fd;
 	phy->autoneg = AUTONEG_DISABLE;
 	phy->speed = speed;
 	phy->duplex = fd;
-	return phy_start_aneg(dev->phy_dev);
+	return emac_mdio_phy_start_aneg(phy, dev->phy_dev);
 }
 
 static int emac_mdio_poll_link(struct mii_phy *phy)
@@ -2509,16 +2528,17 @@ static int emac_mdio_read_link(struct mii_phy *phy)
 {
 	struct net_device *ndev = phy->dev;
 	struct emac_instance *dev = netdev_priv(ndev);
+	struct phy_device *phy_dev = dev->phy_dev;
 	int res;
 
-	res = phy_read_status(dev->phy_dev);
+	res = phy_read_status(phy_dev);
 	if (res)
 		return res;
 
-	dev->phy.speed = phy->speed;
-	dev->phy.duplex = phy->duplex;
-	dev->phy.pause = phy->pause;
-	dev->phy.asym_pause = phy->asym_pause;
+	phy->speed = phy_dev->speed;
+	phy->duplex = phy_dev->duplex;
+	phy->pause = phy_dev->pause;
+	phy->asym_pause = phy_dev->asym_pause;
 	return 0;
 }
 
@@ -2528,13 +2548,6 @@ static int emac_mdio_init_phy(struct mii_phy *phy)
 	struct emac_instance *dev = netdev_priv(ndev);
 
 	phy_start(dev->phy_dev);
-	dev->phy.autoneg = phy->autoneg;
-	dev->phy.speed = phy->speed;
-	dev->phy.duplex = phy->duplex;
-	dev->phy.advertising = phy->advertising;
-	dev->phy.pause = phy->pause;
-	dev->phy.asym_pause = phy->asym_pause;
-
 	return phy_init_hw(dev->phy_dev);
 }
 

drivers/net/ethernet/ibm/ibmvnic.c

@@ -1588,6 +1588,11 @@ static void ibmvnic_netpoll_controller(struct net_device *dev)
 }
 #endif
 
+static int ibmvnic_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	return -EOPNOTSUPP;
+}
+
 static const struct net_device_ops ibmvnic_netdev_ops = {
 	.ndo_open		= ibmvnic_open,
 	.ndo_stop		= ibmvnic_close,
@@ -1599,6 +1604,7 @@ static const struct net_device_ops ibmvnic_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ibmvnic_netpoll_controller,
 #endif
+	.ndo_change_mtu		= ibmvnic_change_mtu,
 };
 
 /* ethtool functions */