ARM: mxs: move display timing configurations into device tree

Move display timing configurations into device tree, so that the
auxdata for mxsfb driver can be killed.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx28-evk.dts

@@ -124,7 +124,32 @@
 				pinctrl-0 = <&lcdif_24bit_pins_a
 					     &lcdif_pins_evk>;
 				panel-enable-gpios = <&gpio3 30 0>;
+				display = <&display>;
 				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33500000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <89>;
+							hfront-porch = <164>;
+							vback-porch = <23>;
+							vfront-porch = <10>;
+							hsync-len = <10>;
+							vsync-len = <10>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
 			};
 
 			can0: can@80032000 {