xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
複製 0
程式碼 問題管理 合併請求 Actions Packages Projects 版本發佈 Wiki Activity

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

瀏覽代碼 
Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...
This commit is contained in:
Linus Torvalds
2013-07-02 14:33:21 -07:00
父節點 ee1a8d402e 5c913a9a97
當前提交 0bf6a210a4
共有 112 個文件被更改，包括 3167 次插入 和 1650 次删除
Download Patch File Download Diff File Expand all files Collapse all files

4
drivers/crypto/ux500/cryp/cryp.c
查看文件

@@ -291,7 +291,7 @@ void cryp_save_device_context(struct cryp_device_data *device_data,
int cryp_mode)
{
enum cryp_algo_mode algomode;
struct cryp_register *src_reg = device_data->base;
struct cryp_register __iomem *src_reg = device_data->base;
struct cryp_config *config =
(struct cryp_config *)device_data->current_ctx;
@@ -349,7 +349,7 @@ void cryp_save_device_context(struct cryp_device_data *device_data,
void cryp_restore_device_context(struct cryp_device_data *device_data,
struct cryp_device_context *ctx)
{
struct cryp_register *reg = device_data->base;
struct cryp_register __iomem *reg = device_data->base;
struct cryp_config *config =
(struct cryp_config *)device_data->current_ctx;

7
drivers/crypto/ux500/cryp/cryp.h
查看文件

@@ -114,6 +114,9 @@ enum cryp_status_id {
};
/* Cryp DMA interface */
#define CRYP_DMA_TX_FIFO 0x08
#define CRYP_DMA_RX_FIFO 0x10
enum cryp_dma_req_type {
CRYP_DMA_DISABLE_BOTH,
CRYP_DMA_ENABLE_IN_DATA,
@@ -217,7 +220,8 @@ struct cryp_dma {
/**
* struct cryp_device_data - structure for a cryp device.
* @base: Pointer to the hardware base address.
* @base: Pointer to virtual base address of the cryp device.
* @phybase: Pointer to physical memory location of the cryp device.
* @dev: Pointer to the devices dev structure.
* @clk: Pointer to the device's clock control.
* @pwr_regulator: Pointer to the device's power control.
@@ -232,6 +236,7 @@ struct cryp_dma {
*/
struct cryp_device_data {
struct cryp_register __iomem *base;
phys_addr_t phybase;
struct device *dev;
struct clk *clk;
struct regulator *pwr_regulator;

57
drivers/crypto/ux500/cryp/cryp_core.c
查看文件

@@ -475,6 +475,19 @@ static int cryp_get_device_data(struct cryp_ctx *ctx,
static void cryp_dma_setup_channel(struct cryp_device_data *device_data,
struct device *dev)
{
struct dma_slave_config mem2cryp = {
.direction = DMA_MEM_TO_DEV,
.dst_addr = device_data->phybase + CRYP_DMA_TX_FIFO,
.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
.dst_maxburst = 4,
};
struct dma_slave_config cryp2mem = {
.direction = DMA_DEV_TO_MEM,
.src_addr = device_data->phybase + CRYP_DMA_RX_FIFO,
.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
.src_maxburst = 4,
};
dma_cap_zero(device_data->dma.mask);
dma_cap_set(DMA_SLAVE, device_data->dma.mask);
@@ -490,6 +503,9 @@ static void cryp_dma_setup_channel(struct cryp_device_data *device_data,
stedma40_filter,
device_data->dma.cfg_cryp2mem);
dmaengine_slave_config(device_data->dma.chan_mem2cryp, &mem2cryp);
dmaengine_slave_config(device_data->dma.chan_cryp2mem, &cryp2mem);
init_completion(&device_data->dma.cryp_dma_complete);
}
@@ -537,10 +553,10 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
"(TO_DEVICE)", __func__);
desc = channel->device->device_prep_slave_sg(channel,
ctx->device->dma.sg_src,
ctx->device->dma.sg_src_len,
direction, DMA_CTRL_ACK, NULL);
desc = dmaengine_prep_slave_sg(channel,
ctx->device->dma.sg_src,
ctx->device->dma.sg_src_len,
direction, DMA_CTRL_ACK);
break;
case DMA_FROM_DEVICE:
@@ -561,12 +577,12 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
dev_dbg(ctx->device->dev, "[%s]: Setting up DMA for buffer "
"(FROM_DEVICE)", __func__);
desc = channel->device->device_prep_slave_sg(channel,
ctx->device->dma.sg_dst,
ctx->device->dma.sg_dst_len,
direction,
DMA_CTRL_ACK |
DMA_PREP_INTERRUPT, NULL);
desc = dmaengine_prep_slave_sg(channel,
ctx->device->dma.sg_dst,
ctx->device->dma.sg_dst_len,
direction,
DMA_CTRL_ACK |
DMA_PREP_INTERRUPT);
desc->callback = cryp_dma_out_callback;
desc->callback_param = ctx;
@@ -578,7 +594,7 @@ static int cryp_set_dma_transfer(struct cryp_ctx *ctx,
return -EFAULT;
}
cookie = desc->tx_submit(desc);
cookie = dmaengine_submit(desc);
dma_async_issue_pending(channel);
return 0;
@@ -591,12 +607,12 @@ static void cryp_dma_done(struct cryp_ctx *ctx)
dev_dbg(ctx->device->dev, "[%s]: ", __func__);
chan = ctx->device->dma.chan_mem2cryp;
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_src,
ctx->device->dma.sg_src_len, DMA_TO_DEVICE);
chan = ctx->device->dma.chan_cryp2mem;
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
dma_unmap_sg(chan->device->dev, ctx->device->dma.sg_dst,
ctx->device->dma.sg_dst_len, DMA_FROM_DEVICE);
}
@@ -1431,6 +1447,7 @@ static int ux500_cryp_probe(struct platform_device *pdev)
goto out_kfree;
}
device_data->phybase = res->start;
device_data->base = ioremap(res->start, resource_size(res));
if (!device_data->base) {
dev_err(dev, "[%s]: ioremap failed!", __func__);
@@ -1458,11 +1475,17 @@ static int ux500_cryp_probe(struct platform_device *pdev)
goto out_regulator;
}
ret = clk_prepare(device_data->clk);
if (ret) {
dev_err(dev, "[%s]: clk_prepare() failed!", __func__);
goto out_clk;
}
/* Enable device power (and clock) */
ret = cryp_enable_power(device_data->dev, device_data, false);
if (ret) {
dev_err(dev, "[%s]: cryp_enable_power() failed!", __func__);
goto out_clk;
goto out_clk_unprepare;
}
cryp_error = cryp_check(device_data);
@@ -1518,11 +1541,16 @@ static int ux500_cryp_probe(struct platform_device *pdev)
goto out_power;
}
dev_info(dev, "successfully registered\n");
return 0;
out_power:
cryp_disable_power(device_data->dev, device_data, false);
out_clk_unprepare:
clk_unprepare(device_data->clk);
out_clk:
clk_put(device_data->clk);
@@ -1593,6 +1621,7 @@ static int ux500_cryp_remove(struct platform_device *pdev)
dev_err(&pdev->dev, "[%s]: cryp_disable_power() failed",
__func__);
clk_unprepare(device_data->clk);
clk_put(device_data->clk);
regulator_put(device_data->pwr_regulator);