Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pul x86/efi changes from Ingo Molnar:
 "This tree adds an EFI bootloader handover protocol, which, once
  supported on the bootloader side, will make bootup faster and might
  result in simpler bootloaders.

  The other change activates the EFI wall clock time accessors on x86-64
  as well, instead of the legacy RTC readout."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Handover Protocol
  x86-64/efi: Use EFI to deal with platform wall clock
Esse commit está contido em:
Linus Torvalds
2012-07-26 13:13:25 -07:00
10 arquivos alterados com 200 adições e 116 exclusões

Ver arquivo

@@ -729,32 +729,68 @@ fail:
* need to create one ourselves (usually the bootloader would create
* one for us).
*/
static efi_status_t make_boot_params(struct boot_params *boot_params,
efi_loaded_image_t *image,
void *handle)
struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
{
struct efi_info *efi = &boot_params->efi_info;
struct apm_bios_info *bi = &boot_params->apm_bios_info;
struct sys_desc_table *sdt = &boot_params->sys_desc_table;
struct e820entry *e820_map = &boot_params->e820_map[0];
struct e820entry *prev = NULL;
struct setup_header *hdr = &boot_params->hdr;
unsigned long size, key, desc_size, _size;
efi_memory_desc_t *mem_map;
void *options = image->load_options;
u32 load_options_size = image->load_options_size / 2; /* ASCII */
struct boot_params *boot_params;
struct sys_desc_table *sdt;
struct apm_bios_info *bi;
struct setup_header *hdr;
struct efi_info *efi;
efi_loaded_image_t *image;
void *options;
u32 load_options_size;
efi_guid_t proto = LOADED_IMAGE_PROTOCOL_GUID;
int options_size = 0;
efi_status_t status;
__u32 desc_version;
unsigned long cmdline;
u8 nr_entries;
u16 *s2;
u8 *s1;
int i;
sys_table = _table;
/* Check if we were booted by the EFI firmware */
if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
return NULL;
status = efi_call_phys3(sys_table->boottime->handle_protocol,
handle, &proto, (void *)&image);
if (status != EFI_SUCCESS) {
efi_printk("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
return NULL;
}
status = low_alloc(0x4000, 1, (unsigned long *)&boot_params);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc lowmem for boot params\n");
return NULL;
}
memset(boot_params, 0x0, 0x4000);
hdr = &boot_params->hdr;
efi = &boot_params->efi_info;
bi = &boot_params->apm_bios_info;
sdt = &boot_params->sys_desc_table;
/* Copy the second sector to boot_params */
memcpy(&hdr->jump, image->image_base + 512, 512);
/*
* Fill out some of the header fields ourselves because the
* EFI firmware loader doesn't load the first sector.
*/
hdr->root_flags = 1;
hdr->vid_mode = 0xffff;
hdr->boot_flag = 0xAA55;
hdr->code32_start = (__u64)(unsigned long)image->image_base;
hdr->type_of_loader = 0x21;
/* Convert unicode cmdline to ascii */
options = image->load_options;
load_options_size = image->load_options_size / 2; /* ASCII */
cmdline = 0;
s2 = (u16 *)options;
@@ -791,18 +827,36 @@ static efi_status_t make_boot_params(struct boot_params *boot_params,
hdr->ramdisk_image = 0;
hdr->ramdisk_size = 0;
status = handle_ramdisks(image, hdr);
if (status != EFI_SUCCESS)
goto free_cmdline;
setup_graphics(boot_params);
/* Clear APM BIOS info */
memset(bi, 0, sizeof(*bi));
memset(sdt, 0, sizeof(*sdt));
memcpy(&efi->efi_loader_signature, EFI_LOADER_SIGNATURE, sizeof(__u32));
status = handle_ramdisks(image, hdr);
if (status != EFI_SUCCESS)
goto fail2;
return boot_params;
fail2:
if (options_size)
low_free(options_size, hdr->cmd_line_ptr);
fail:
low_free(0x4000, (unsigned long)boot_params);
return NULL;
}
static efi_status_t exit_boot(struct boot_params *boot_params,
void *handle)
{
struct efi_info *efi = &boot_params->efi_info;
struct e820entry *e820_map = &boot_params->e820_map[0];
struct e820entry *prev = NULL;
unsigned long size, key, desc_size, _size;
efi_memory_desc_t *mem_map;
efi_status_t status;
__u32 desc_version;
u8 nr_entries;
int i;
size = sizeof(*mem_map) * 32;
@@ -811,7 +865,7 @@ again:
_size = size;
status = low_alloc(size, 1, (unsigned long *)&mem_map);
if (status != EFI_SUCCESS)
goto free_cmdline;
return status;
status = efi_call_phys5(sys_table->boottime->get_memory_map, &size,
mem_map, &key, &desc_size, &desc_version);
@@ -823,6 +877,7 @@ again:
if (status != EFI_SUCCESS)
goto free_mem_map;
memcpy(&efi->efi_loader_signature, EFI_LOADER_SIGNATURE, sizeof(__u32));
efi->efi_systab = (unsigned long)sys_table;
efi->efi_memdesc_size = desc_size;
efi->efi_memdesc_version = desc_version;
@@ -906,61 +961,13 @@ again:
free_mem_map:
low_free(_size, (unsigned long)mem_map);
free_cmdline:
if (options_size)
low_free(options_size, hdr->cmd_line_ptr);
fail:
return status;
}
/*
* On success we return a pointer to a boot_params structure, and NULL
* on failure.
*/
struct boot_params *efi_main(void *handle, efi_system_table_t *_table)
static efi_status_t relocate_kernel(struct setup_header *hdr)
{
struct boot_params *boot_params;
unsigned long start, nr_pages;
struct desc_ptr *gdt, *idt;
efi_loaded_image_t *image;
struct setup_header *hdr;
efi_status_t status;
efi_guid_t proto = LOADED_IMAGE_PROTOCOL_GUID;
struct desc_struct *desc;
sys_table = _table;
/* Check if we were booted by the EFI firmware */
if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
goto fail;
status = efi_call_phys3(sys_table->boottime->handle_protocol,
handle, &proto, (void *)&image);
if (status != EFI_SUCCESS) {
efi_printk("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
goto fail;
}
status = low_alloc(0x4000, 1, (unsigned long *)&boot_params);
if (status != EFI_SUCCESS) {
efi_printk("Failed to alloc lowmem for boot params\n");
goto fail;
}
memset(boot_params, 0x0, 0x4000);
hdr = &boot_params->hdr;
/* Copy the second sector to boot_params */
memcpy(&hdr->jump, image->image_base + 512, 512);
/*
* Fill out some of the header fields ourselves because the
* EFI firmware loader doesn't load the first sector.
*/
hdr->root_flags = 1;
hdr->vid_mode = 0xffff;
hdr->boot_flag = 0xAA55;
/*
* The EFI firmware loader could have placed the kernel image
@@ -978,16 +985,40 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table)
if (status != EFI_SUCCESS) {
status = low_alloc(hdr->init_size, hdr->kernel_alignment,
&start);
if (status != EFI_SUCCESS) {
if (status != EFI_SUCCESS)
efi_printk("Failed to alloc mem for kernel\n");
goto fail;
}
}
hdr->code32_start = (__u32)start;
hdr->pref_address = (__u64)(unsigned long)image->image_base;
if (status == EFI_SUCCESS)
memcpy((void *)start, (void *)(unsigned long)hdr->code32_start,
hdr->init_size);
memcpy((void *)start, image->image_base, image->image_size);
hdr->pref_address = hdr->code32_start;
hdr->code32_start = (__u32)start;
return status;
}
/*
* On success we return a pointer to a boot_params structure, and NULL
* on failure.
*/
struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
struct boot_params *boot_params)
{
struct desc_ptr *gdt, *idt;
efi_loaded_image_t *image;
struct setup_header *hdr = &boot_params->hdr;
efi_status_t status;
struct desc_struct *desc;
sys_table = _table;
/* Check if we were booted by the EFI firmware */
if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
goto fail;
setup_graphics(boot_params);
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, sizeof(*gdt),
@@ -1015,7 +1046,18 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table)
idt->size = 0;
idt->address = 0;
status = make_boot_params(boot_params, image, handle);
/*
* If the kernel isn't already loaded at the preferred load
* address, relocate it.
*/
if (hdr->pref_address != hdr->code32_start) {
status = relocate_kernel(hdr);
if (status != EFI_SUCCESS)
goto fail;
}
status = exit_boot(boot_params, handle);
if (status != EFI_SUCCESS)
goto fail;

Ver arquivo

@@ -42,6 +42,16 @@ ENTRY(startup_32)
*/
add $0x4, %esp
call make_boot_params
cmpl $0, %eax
je 1f
movl 0x4(%esp), %esi
movl (%esp), %ecx
pushl %eax
pushl %esi
pushl %ecx
.org 0x30,0x90
call efi_main
cmpl $0, %eax
movl %eax, %esi

Ver arquivo

@@ -209,6 +209,16 @@ ENTRY(startup_64)
.org 0x210
mov %rcx, %rdi
mov %rdx, %rsi
pushq %rdi
pushq %rsi
call make_boot_params
cmpq $0,%rax
je 1f
mov %rax, %rdx
popq %rsi
popq %rdi
.org 0x230,0x90
call efi_main
movq %rax,%rsi
cmpq $0,%rax

Ver arquivo

@@ -283,7 +283,7 @@ _start:
# Part 2 of the header, from the old setup.S
.ascii "HdrS" # header signature
.word 0x020a # header version number (>= 0x0105)
.word 0x020b # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
@@ -401,6 +401,8 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
#define INIT_SIZE VO_INIT_SIZE
#endif
init_size: .long INIT_SIZE # kernel initialization size
handover_offset: .long 0x30 # offset to the handover
# protocol entry point
# End of setup header #####################################################