Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

arch/mips/Kconfig

@@ -62,6 +62,7 @@ config MIPS
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select GENERIC_TIME_VSYSCALL
 	select ARCH_CLOCKSOURCE_DATA
+	select HANDLE_DOMAIN_IRQ
 
 menu "Machine selection"
 
@@ -137,7 +138,7 @@ config ATH79
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_MIPS16
-	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_ZBOOT_UART_PROM
 	select USE_OF
 	help
 	  Support for the Atheros AR71XX/AR724X/AR913X SoCs.
@@ -194,6 +195,7 @@ config BCM47XX
 	select GPIOLIB
 	select LEDS_GPIO_REGISTER
 	select BCM47XX_NVRAM
+	select BCM47XX_SPROM
 	help
 	 Support for BCM47XX based boards
 
@@ -471,6 +473,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_RELOCATABLE
 	select USE_OF
 	select ZONE_DMA32 if 64BIT
 	select BUILTIN_DTB
@@ -505,6 +508,7 @@ config MIPS_SEAD3
 	select MIPS_MSC
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS32_R6
 	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -514,6 +518,7 @@ config MIPS_SEAD3
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_MICROMIPS
 	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_RELOCATABLE
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USE_OF
@@ -1153,6 +1158,13 @@ config ISA_DMA_API
 config HOLES_IN_ZONE
 	bool
 
+config SYS_SUPPORTS_RELOCATABLE
+	bool
+	help
+	 Selected if the platform supports relocating the kernel.
+	 The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
+	 to allow access to command line and entropy sources.
+
 #
 # Endianness selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
@@ -1340,11 +1352,30 @@ config CPU_LOONGSON3
 	select CPU_SUPPORTS_HUGEPAGES
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
+	select MIPS_PGD_C0_CONTEXT
 	select GPIOLIB
 	help
 		The Loongson 3 processor implements the MIPS64R2 instruction
 		set with many extensions.
 
+config LOONGSON3_ENHANCEMENT
+	bool "New Loongson 3 CPU Enhancements"
+	default n
+	select CPU_MIPSR2
+	select CPU_HAS_PREFETCH
+	depends on CPU_LOONGSON3
+	help
+	  New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A
+	  R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as
+	  FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User
+	  Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer),
+	  Fast TLB refill support, etc.
+
+	  This option enable those enhancements which are not probed at run
+	  time. If you want a generic kernel to run on all Loongson 3 machines,
+	  please say 'N' here. If you want a high-performance kernel to run on
+	  new Loongson 3 machines only, please say 'Y' here.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
@@ -1373,6 +1404,8 @@ config CPU_LOONGSON1B
 	bool "Loongson 1B"
 	depends on SYS_HAS_CPU_LOONGSON1B
 	select CPU_LOONGSON1
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
 	  release 2 instruction set.
@@ -1671,6 +1704,7 @@ config CPU_XLP
 	select CPU_HAS_PREFETCH
 	select CPU_MIPSR2
 	select CPU_SUPPORTS_HUGEPAGES
+	select MIPS_ASID_BITS_VARIABLE
 	help
 	  Netlogic Microsystems XLP processors.
 endchoice
@@ -1796,6 +1830,7 @@ config CPU_BMIPS4380
 	select MIPS_L1_CACHE_SHIFT_6
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
+	select CPU_HAS_RIXI
 
 config CPU_BMIPS5000
 	bool
@@ -1803,10 +1838,12 @@ config CPU_BMIPS5000
 	select MIPS_L1_CACHE_SHIFT_7
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
+	select CPU_HAS_RIXI
 
 config SYS_HAS_CPU_LOONGSON3
 	bool
 	select CPU_SUPPORTS_CPUFREQ
+	select CPU_HAS_RIXI
 
 config SYS_HAS_CPU_LOONGSON2E
 	bool
@@ -1959,11 +1996,15 @@ config CPU_MIPSR1
 config CPU_MIPSR2
 	bool
 	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
+	select CPU_HAS_RIXI
 	select MIPS_SPRAM
 
 config CPU_MIPSR6
 	bool
 	default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
+	select CPU_HAS_RIXI
+	select HAVE_ARCH_BITREVERSE
+	select MIPS_ASID_BITS_VARIABLE
 	select MIPS_SPRAM
 
 config EVA
@@ -1997,7 +2038,7 @@ config MIPS_PGD_C0_CONTEXT
 #
 config HARDWARE_WATCHPOINTS
        bool
-       default y if CPU_MIPSR1 || CPU_MIPSR2
+       default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
 
 menu "Kernel type"
 
@@ -2040,6 +2081,16 @@ config KVM_GUEST_TIMER_FREQ
 	  emulation when determining guest CPU Frequency. Instead, the guest's
 	  timer frequency is specified directly.
 
+config MIPS_VA_BITS_48
+	bool "48 bits virtual memory"
+	depends on 64BIT
+	help
+	  Support a maximum at least 48 bits of application virtual memory.
+	  Default is 40 bits or less, depending on the CPU.
+	  This option result in a small memory overhead for page tables.
+	  This option is only supported with 16k and 64k page sizes.
+	  If unsure, say N.
+
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_4KB
@@ -2047,6 +2098,7 @@ choice
 config PAGE_SIZE_4KB
 	bool "4kB"
 	depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
+	depends on !MIPS_VA_BITS_48
 	help
 	 This option select the standard 4kB Linux page size.  On some
 	 R3000-family processors this is the only available page size.  Using
@@ -2056,6 +2108,7 @@ config PAGE_SIZE_4KB
 config PAGE_SIZE_8KB
 	bool "8kB"
 	depends on CPU_R8000 || CPU_CAVIUM_OCTEON
+	depends on !MIPS_VA_BITS_48
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
@@ -2074,6 +2127,7 @@ config PAGE_SIZE_16KB
 config PAGE_SIZE_32KB
 	bool "32kB"
 	depends on CPU_CAVIUM_OCTEON
+	depends on !MIPS_VA_BITS_48
 	help
 	  Using 32kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
@@ -2278,7 +2332,7 @@ config MIPS_CMP
 
 config MIPS_CPS
 	bool "MIPS Coherent Processing System support"
-	depends on SYS_SUPPORTS_MIPS_CPS && !CPU_MIPSR6
+	depends on SYS_SUPPORTS_MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPC
 	select MIPS_CPS_PM if HOTPLUG_CPU
@@ -2369,6 +2423,9 @@ config CPU_HAS_WB
 config XKS01
 	bool
 
+config CPU_HAS_RIXI
+	bool
+
 #
 # Vectored interrupt mode is an R2 feature
 #
@@ -2399,6 +2456,21 @@ config CPU_R4000_WORKAROUNDS
 config CPU_R4400_WORKAROUNDS
 	bool
 
+config MIPS_ASID_SHIFT
+	int
+	default 6 if CPU_R3000 || CPU_TX39XX
+	default 4 if CPU_R8000
+	default 0
+
+config MIPS_ASID_BITS
+	int
+	default 0 if MIPS_ASID_BITS_VARIABLE
+	default 6 if CPU_R3000 || CPU_TX39XX
+	default 8
+
+config MIPS_ASID_BITS_VARIABLE
+	bool
+
 #
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed
@@ -2468,6 +2540,61 @@ config NUMA
 config SYS_SUPPORTS_NUMA
 	bool
 
+config RELOCATABLE
+	bool "Relocatable kernel"
+	depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6)
+	help
+	  This builds a kernel image that retains relocation information
+	  so it can be loaded someplace besides the default 1MB.
+	  The relocations make the kernel binary about 15% larger,
+	  but are discarded at runtime
+
+config RELOCATION_TABLE_SIZE
+	hex "Relocation table size"
+	depends on RELOCATABLE
+	range 0x0 0x01000000
+	default "0x00100000"
+	---help---
+	  A table of relocation data will be appended to the kernel binary
+	  and parsed at boot to fix up the relocated kernel.
+
+	  This option allows the amount of space reserved for the table to be
+	  adjusted, although the default of 1Mb should be ok in most cases.
+
+	  The build will fail and a valid size suggested if this is too small.
+
+	  If unsure, leave at the default value.
+
+config RANDOMIZE_BASE
+	bool "Randomize the address of the kernel image"
+	depends on RELOCATABLE
+	---help---
+	   Randomizes the physical and virtual address at which the
+	   kernel image is loaded, as a security feature that
+	   deters exploit attempts relying on knowledge of the location
+	   of kernel internals.
+
+	   Entropy is generated using any coprocessor 0 registers available.
+
+	   The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
+
+	   If unsure, say N.
+
+config RANDOMIZE_BASE_MAX_OFFSET
+	hex "Maximum kASLR offset" if EXPERT
+	depends on RANDOMIZE_BASE
+	range 0x0 0x40000000 if EVA || 64BIT
+	range 0x0 0x08000000
+	default "0x01000000"
+	---help---
+	  When kASLR is active, this provides the maximum offset that will
+	  be applied to the kernel image. It should be set according to the
+	  amount of physical RAM available in the target system minus
+	  PHYSICAL_START and must be a power of 2.
+
+	  This is limited by the size of KSEG0, 256Mb on 32-bit or 1Gb with
+	  EVA or 64-bit. The default is 16Mb.
+
 config NODES_SHIFT
 	int
 	default "6"
@@ -2475,7 +2602,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3)
+	depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -2808,6 +2935,10 @@ choice
 
 	config MIPS_CMDLINE_FROM_BOOTLOADER
 		bool "Bootloader kernel arguments if available"
+
+	config MIPS_CMDLINE_BUILTIN_EXTEND
+		depends on CMDLINE_BOOL
+		bool "Extend builtin kernel arguments with bootloader arguments"
 endchoice
 
 endmenu