test: add msg_zerocopy test

Introduce regression test for msg_zerocopy feature. Send traffic from
one process to another with and without zerocopy.

Evaluate tcp, udp, raw and packet sockets, including variants
- udp: corking and corking with mixed copy/zerocopy calls
- raw: with and without hdrincl
- packet: at both raw and dgram level

Test on both ipv4 and ipv6, optionally with ethtool changes to
disable scatter-gather, tx checksum or tso offload. All of these
can affect zerocopy behavior.

The regression test can be run on a single machine if over a veth
pair. Then skb_orphan_frags_rx must be modified to be identical to
skb_orphan_frags to allow forwarding zerocopy locally.

The msg_zerocopy.sh script will setup the veth pair in network
namespaces and run all tests.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/net/msg_zerocopy.sh

@@ -0,0 +1,112 @@
+#!/bin/bash
+#
+# Send data between two processes across namespaces
+# Run twice: once without and once with zerocopy
+
+set -e
+
+readonly DEV="veth0"
+readonly DEV_MTU=65535
+readonly BIN="./msg_zerocopy"
+
+readonly RAND="$(mktemp -u XXXXXX)"
+readonly NSPREFIX="ns-${RAND}"
+readonly NS1="${NSPREFIX}1"
+readonly NS2="${NSPREFIX}2"
+
+readonly SADDR4='192.168.1.1'
+readonly DADDR4='192.168.1.2'
+readonly SADDR6='fd::1'
+readonly DADDR6='fd::2'
+
+readonly path_sysctl_mem="net.core.optmem_max"
+
+# Argument parsing
+if [[ "$#" -lt "2" ]]; then
+	echo "Usage: $0 [4|6] [tcp|udp|raw|raw_hdrincl|packet|packet_dgram] <args>"
+	exit 1
+fi
+
+readonly IP="$1"
+shift
+readonly TXMODE="$1"
+shift
+readonly EXTRA_ARGS="$@"
+
+# Argument parsing: configure addresses
+if [[ "${IP}" == "4" ]]; then
+	readonly SADDR="${SADDR4}"
+	readonly DADDR="${DADDR4}"
+elif [[ "${IP}" == "6" ]]; then
+	readonly SADDR="${SADDR6}"
+	readonly DADDR="${DADDR6}"
+else
+	echo "Invalid IP version ${IP}"
+	exit 1
+fi
+
+# Argument parsing: select receive mode
+#
+# This differs from send mode for
+# - packet:	use raw recv, because packet receives skb clones
+# - raw_hdrinc: use raw recv, because hdrincl is a tx-only option
+case "${TXMODE}" in
+'packet' | 'packet_dgram' | 'raw_hdrincl')
+	RXMODE='raw'
+	;;
+*)
+	RXMODE="${TXMODE}"
+	;;
+esac
+
+# Start of state changes: install cleanup handler
+save_sysctl_mem="$(sysctl -n ${path_sysctl_mem})"
+
+cleanup() {
+	ip netns del "${NS2}"
+	ip netns del "${NS1}"
+	sysctl -w -q "${path_sysctl_mem}=${save_sysctl_mem}"
+}
+
+trap cleanup EXIT
+
+# Configure system settings
+sysctl -w -q "${path_sysctl_mem}=1000000"
+
+# Create virtual ethernet pair between network namespaces
+ip netns add "${NS1}"
+ip netns add "${NS2}"
+
+ip link add "${DEV}" mtu "${DEV_MTU}" netns "${NS1}" type veth \
+  peer name "${DEV}" mtu "${DEV_MTU}" netns "${NS2}"
+
+# Bring the devices up
+ip -netns "${NS1}" link set "${DEV}" up
+ip -netns "${NS2}" link set "${DEV}" up
+
+# Set fixed MAC addresses on the devices
+ip -netns "${NS1}" link set dev "${DEV}" address 02:02:02:02:02:02
+ip -netns "${NS2}" link set dev "${DEV}" address 06:06:06:06:06:06
+
+# Add fixed IP addresses to the devices
+ip -netns "${NS1}" addr add 192.168.1.1/24 dev "${DEV}"
+ip -netns "${NS2}" addr add 192.168.1.2/24 dev "${DEV}"
+ip -netns "${NS1}" addr add       fd::1/64 dev "${DEV}" nodad
+ip -netns "${NS2}" addr add       fd::2/64 dev "${DEV}" nodad
+
+# Optionally disable sg or csum offload to test edge cases
+# ip netns exec "${NS1}" ethtool -K "${DEV}" sg off
+
+do_test() {
+	local readonly ARGS="$1"
+
+	echo "ipv${IP} ${TXMODE} ${ARGS}"
+	ip netns exec "${NS2}" "${BIN}" "-${IP}" -i "${DEV}" -t 2 -C 2 -S "${SADDR}" -D "${DADDR}" ${ARGS} -r "${RXMODE}" &
+	sleep 0.2
+	ip netns exec "${NS1}" "${BIN}" "-${IP}" -i "${DEV}" -t 1 -C 3 -S "${SADDR}" -D "${DADDR}" ${ARGS} "${TXMODE}"
+	wait
+}
+
+do_test "${EXTRA_ARGS}"
+do_test "-z ${EXTRA_ARGS}"
+echo ok