Merge tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core merge from Greg Kroah-Hartman: "Here is the big driver core update for 3.7-rc1. A number of firmware_class.c updates (as you saw a month or so ago), and some hyper-v updates and some printk fixes as well. All patches that are outside of the drivers/base area have been acked by the respective maintainers, and have all been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits) memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl() device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit] Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit dev: Add dev_vprintk_emit and dev_printk_emit netdev_printk/netif_printk: Remove a superfluous logging colon netdev_printk/dynamic_netdev_dbg: Directly call printk_emit dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack driver-core: Shut up dev_dbg_reatelimited() without DEBUG tools/hv: Parse /etc/os-release tools/hv: Check for read/write errors tools/hv: Fix exit() error code tools/hv: Fix file handle leak Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO Tools: hv: Rename the function kvp_get_ip_address() Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO Tools: hv: Add an example script to configure an interface ...
2012-10-01 12:10:44 -07:00
parent 3aebd34b12 e0f21e6d52
commit 06d2fe153b
55 changed files with 5816 additions and 554 deletions
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -21,6 +21,12 @@ config EXTCON_GPIO
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.

+config EXTCON_ADC_JACK
+	tristate "ADC Jack extcon support"
+	depends on IIO
+	help
+	  Say Y here to enable extcon device driver based on ADC values.
+
 config EXTCON_MAX77693
 	tristate "MAX77693 EXTCON Support"
 	depends on MFD_MAX77693
@@ -41,7 +47,7 @@ config EXTCON_MAX8997

 config EXTCON_ARIZONA
 	tristate "Wolfson Arizona EXTCON support"
-	depends on MFD_ARIZONA
+	depends on MFD_ARIZONA && INPUT
 	help
 	  Say Y here to enable support for external accessory detection
 	  with Wolfson Arizona devices. These are audio CODECs with
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -2,8 +2,9 @@
 # Makefile for external connector class (extcon) devices
 #

-obj-$(CONFIG_EXTCON)		+= extcon_class.o
-obj-$(CONFIG_EXTCON_GPIO)	+= extcon_gpio.o
+obj-$(CONFIG_EXTCON)		+= extcon-class.o
+obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
+obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
 obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -0,0 +1,198 @@
+/*
+ * drivers/extcon/extcon-adc-jack.c
+ *
+ * Analog Jack extcon driver with ADC-based detection capability.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * Modified for calling to IIO to get adc by <anish.singh@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/iio/consumer.h>
+#include <linux/extcon/extcon-adc-jack.h>
+#include <linux/extcon.h>
+
+/**
+ * struct adc_jack_data - internal data for adc_jack device driver
+ * @edev        - extcon device.
+ * @cable_names - list of supported cables.
+ * @num_cables  - size of cable_names.
+ * @adc_conditions       - list of adc value conditions.
+ * @num_conditions       - size of adc_conditions.
+ * @irq         - irq number of attach/detach event (0 if not exist).
+ * @handling_delay      - interrupt handler will schedule extcon event
+ *                      handling at handling_delay jiffies.
+ * @handler     - extcon event handler called by interrupt handler.
+ * @chan       - iio channel being queried.
+ */
+struct adc_jack_data {
+	struct extcon_dev edev;
+
+	const char **cable_names;
+	int num_cables;
+	struct adc_jack_cond *adc_conditions;
+	int num_conditions;
+
+	int irq;
+	unsigned long handling_delay; /* in jiffies */
+	struct delayed_work handler;
+
+	struct iio_channel *chan;
+};
+
+static void adc_jack_handler(struct work_struct *work)
+{
+	struct adc_jack_data *data = container_of(to_delayed_work(work),
+			struct adc_jack_data,
+			handler);
+	u32 state = 0;
+	int ret, adc_val;
+	int i;
+
+	ret = iio_read_channel_raw(data->chan, &adc_val);
+	if (ret < 0) {
+		dev_err(data->edev.dev, "read channel() error: %d\n", ret);
+		return;
+	}
+
+	/* Get state from adc value with adc_conditions */
+	for (i = 0; i < data->num_conditions; i++) {
+		struct adc_jack_cond *def = &data->adc_conditions[i];
+		if (!def->state)
+			break;
+		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
+			state = def->state;
+			break;
+		}
+	}
+	/* if no def has met, it means state = 0 (no cables attached) */
+
+	extcon_set_state(&data->edev, state);
+}
+
+static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
+{
+	struct adc_jack_data *data = _data;
+
+	schedule_delayed_work(&data->handler, data->handling_delay);
+	return IRQ_HANDLED;
+}
+
+static int __devinit adc_jack_probe(struct platform_device *pdev)
+{
+	struct adc_jack_data *data;
+	struct adc_jack_pdata *pdata = pdev->dev.platform_data;
+	int i, err = 0;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->edev.name = pdata->name;
+
+	if (!pdata->cable_names) {
+		err = -EINVAL;
+		dev_err(&pdev->dev, "error: cable_names not defined.\n");
+		goto out;
+	}
+
+	data->edev.supported_cable = pdata->cable_names;
+
+	/* Check the length of array and set num_cables */
+	for (i = 0; data->edev.supported_cable[i]; i++)
+		;
+	if (i == 0 || i > SUPPORTED_CABLE_MAX) {
+		err = -EINVAL;
+		dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n",
+				i - 1);
+		goto out;
+	}
+	data->num_cables = i;
+
+	if (!pdata->adc_conditions ||
+			!pdata->adc_conditions[0].state) {
+		err = -EINVAL;
+		dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
+		goto out;
+	}
+	data->adc_conditions = pdata->adc_conditions;
+
+	/* Check the length of array and set num_conditions */
+	for (i = 0; data->adc_conditions[i].state; i++)
+		;
+	data->num_conditions = i;
+
+	data->chan = iio_channel_get(dev_name(&pdev->dev),
+			pdata->consumer_channel);
+	if (IS_ERR(data->chan)) {
+		err = PTR_ERR(data->chan);
+		goto out;
+	}
+
+	data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms);
+
+	INIT_DELAYED_WORK_DEFERRABLE(&data->handler, adc_jack_handler);
+
+	platform_set_drvdata(pdev, data);
+
+	err = extcon_dev_register(&data->edev, &pdev->dev);
+	if (err)
+		goto out;
+
+	data->irq = platform_get_irq(pdev, 0);
+	if (!data->irq) {
+		dev_err(&pdev->dev, "platform_get_irq failed\n");
+		err = -ENODEV;
+		goto err_irq;
+	}
+
+	err = request_any_context_irq(data->irq, adc_jack_irq_thread,
+			pdata->irq_flags, pdata->name, data);
+
+	if (err) {
+		dev_err(&pdev->dev, "error: irq %d\n", data->irq);
+		err = -EINVAL;
+		goto err_irq;
+	}
+
+	goto out;
+
+err_irq:
+	extcon_dev_unregister(&data->edev);
+out:
+	return err;
+}
+
+static int __devexit adc_jack_remove(struct platform_device *pdev)
+{
+	struct adc_jack_data *data = platform_get_drvdata(pdev);
+
+	free_irq(data->irq, data);
+	cancel_work_sync(&data->handler.work);
+	extcon_dev_unregister(&data->edev);
+
+	return 0;
+}
+
+static struct platform_driver adc_jack_driver = {
+	.probe          = adc_jack_probe,
+	.remove         = __devexit_p(adc_jack_remove),
+	.driver         = {
+		.name   = "adc-jack",
+		.owner  = THIS_MODULE,
+	},
+};
+
+module_platform_driver(adc_jack_driver);
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/input.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
@@ -30,11 +31,14 @@
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>

+#define ARIZONA_NUM_BUTTONS 6
+
 struct arizona_extcon_info {
 	struct device *dev;
 	struct arizona *arizona;
 	struct mutex lock;
 	struct regulator *micvdd;
+	struct input_dev *input;

 	int micd_mode;
 	const struct arizona_micd_config *micd_modes;
@@ -54,6 +58,18 @@ static const struct arizona_micd_config micd_default_modes[] = {
 	{ 0,                  2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 },
 };

+static struct {
+	u16 status;
+	int report;
+} arizona_lvl_to_key[ARIZONA_NUM_BUTTONS] = {
+	{  0x1, BTN_0 },
+	{  0x2, BTN_1 },
+	{  0x4, BTN_2 },
+	{  0x8, BTN_3 },
+	{ 0x10, BTN_4 },
+	{ 0x20, BTN_5 },
+};
+
 #define ARIZONA_CABLE_MECHANICAL 0
 #define ARIZONA_CABLE_MICROPHONE 1
 #define ARIZONA_CABLE_HEADPHONE  2
@@ -133,6 +149,7 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)

 	if (change) {
 		regulator_disable(info->micvdd);
+		pm_runtime_mark_last_busy(info->dev);
 		pm_runtime_put_autosuspend(info->dev);
 	}
 }
@@ -141,8 +158,8 @@ static irqreturn_t arizona_micdet(int irq, void *data)
 {
 	struct arizona_extcon_info *info = data;
 	struct arizona *arizona = info->arizona;
-	unsigned int val;
-	int ret;
+	unsigned int val, lvl;
+	int ret, i;

 	mutex_lock(&info->lock);

@@ -219,13 +236,22 @@ static irqreturn_t arizona_micdet(int irq, void *data)

 	/*
 	 * If we're still detecting and we detect a short then we've
-	 * got a headphone.  Otherwise it's a button press, the
-	 * button reporting is stubbed out for now.
+	 * got a headphone.  Otherwise it's a button press.
 	 */
 	if (val & 0x3fc) {
 		if (info->mic) {
 			dev_dbg(arizona->dev, "Mic button detected\n");

+			lvl = val & ARIZONA_MICD_LVL_MASK;
+			lvl >>= ARIZONA_MICD_LVL_SHIFT;
+
+			for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
+				if (lvl & arizona_lvl_to_key[i].status)
+					input_report_key(info->input,
+							 arizona_lvl_to_key[i].report,
+							 1);
+			input_sync(info->input);
+
 		} else if (info->detecting) {
 			dev_dbg(arizona->dev, "Headphone detected\n");
 			info->detecting = false;
@@ -244,6 +270,10 @@ static irqreturn_t arizona_micdet(int irq, void *data)
 		}
 	} else {
 		dev_dbg(arizona->dev, "Mic button released\n");
+		for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
+			input_report_key(info->input,
+					 arizona_lvl_to_key[i].report, 0);
+		input_sync(info->input);
 	}

 handled:
@@ -258,7 +288,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 	struct arizona_extcon_info *info = data;
 	struct arizona *arizona = info->arizona;
 	unsigned int val;
-	int ret;
+	int ret, i;

 	pm_runtime_get_sync(info->dev);

@@ -288,6 +318,11 @@ static irqreturn_t arizona_jackdet(int irq, void *data)

 		arizona_stop_mic(info);

+		for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
+			input_report_key(info->input,
+					 arizona_lvl_to_key[i].report, 0);
+		input_sync(info->input);
+
 		ret = extcon_update_state(&info->edev, 0xffffffff, 0);
 		if (ret != 0)
 			dev_err(arizona->dev, "Removal report failed: %d\n",
@@ -307,13 +342,13 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev)
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
 	struct arizona_pdata *pdata;
 	struct arizona_extcon_info *info;
-	int ret, mode;
+	int ret, mode, i;

 	pdata = dev_get_platdata(arizona->dev);

 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+		dev_err(&pdev->dev, "Failed to allocate memory\n");
 		ret = -ENOMEM;
 		goto err;
 	}
@@ -350,7 +385,7 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev)

 	ret = extcon_dev_register(&info->edev, arizona->dev);
 	if (ret < 0) {
-		dev_err(arizona->dev, "extcon_dev_regster() failed: %d\n",
+		dev_err(arizona->dev, "extcon_dev_register() failed: %d\n",
 			ret);
 		goto err;
 	}
@@ -382,6 +417,20 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev)

 	arizona_extcon_set_mode(info, 0);

+	info->input = input_allocate_device();
+	if (!info->input) {
+		dev_err(arizona->dev, "Can't allocate input dev\n");
+		ret = -ENOMEM;
+		goto err_register;
+	}
+
+	for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
+		input_set_capability(info->input, EV_KEY,
+				     arizona_lvl_to_key[i].report);
+	info->input->name = "Headset";
+	info->input->phys = "arizona/extcon";
+	info->input->dev.parent = &pdev->dev;
+
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_idle(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
@@ -391,7 +440,7 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
 			ret);
-		goto err_register;
+		goto err_input;
 	}

 	ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 1);
@@ -441,8 +490,16 @@ static int __devinit arizona_extcon_probe(struct platform_device *pdev)

 	pm_runtime_put(&pdev->dev);

+	ret = input_register_device(info->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Can't register input device: %d\n", ret);
+		goto err_micdet;
+	}
+
 	return 0;

+err_micdet:
+	arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info);
 err_fall_wake:
 	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0);
 err_fall:
@@ -451,6 +508,8 @@ err_rise_wake:
 	arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0);
 err_rise:
 	arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info);
+err_input:
+	input_free_device(info->input);
 err_register:
 	pm_runtime_disable(&pdev->dev);
 	extcon_dev_unregister(&info->edev);
@@ -473,6 +532,7 @@ static int __devexit arizona_extcon_remove(struct platform_device *pdev)
 	regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
 			   ARIZONA_JD1_ENA, 0);
 	arizona_clk32k_disable(arizona);
+	input_unregister_device(info->input);
 	extcon_dev_unregister(&info->edev);

 	return 0;
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon-class.c
@@ -30,6 +30,7 @@
 #include <linux/err.h>
 #include <linux/extcon.h>
 #include <linux/slab.h>
+#include <linux/sysfs.h>

 /*
 * extcon_cable_name suggests the standard cable names for commonly used
@@ -442,7 +443,7 @@ static int _call_per_cable(struct notifier_block *nb, unsigned long val,

 /**
 * extcon_register_interest() - Register a notifier for a state change of a
- *			      specific cable, not a entier set of cables of a
+ *			      specific cable, not an entier set of cables of a
 *			      extcon device.
 * @obj:	an empty extcon_specific_cable_nb object to be returned.
 * @extcon_name:	the name of extcon device.
@@ -498,7 +499,7 @@ int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
 }

 /**
- * extcon_register_notifier() - Register a notifee to get notified by
+ * extcon_register_notifier() - Register a notifiee to get notified by
 *			      any attach status changes from the extcon.
 * @edev:	the extcon device.
 * @nb:		a notifier block to be registered.
@@ -515,7 +516,7 @@ int extcon_register_notifier(struct extcon_dev *edev,
 EXPORT_SYMBOL_GPL(extcon_register_notifier);

 /**
- * extcon_unregister_notifier() - Unregister a notifee from the extcon device.
+ * extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
 * @edev:	the extcon device.
 * @nb:		a registered notifier block to be unregistered.
 */
@@ -673,10 +674,12 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
 			cable->attr_g.name = str;
 			cable->attr_g.attrs = cable->attrs;

+			sysfs_attr_init(&cable->attr_name.attr);
 			cable->attr_name.attr.name = "name";
 			cable->attr_name.attr.mode = 0444;
 			cable->attr_name.show = cable_name_show;

+			sysfs_attr_init(&cable->attr_state.attr);
 			cable->attr_state.attr.name = "state";
 			cable->attr_state.attr.mode = 0644;
 			cable->attr_state.show = cable_state_show;
@@ -722,6 +725,7 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
 				goto err_muex;
 			}
 			strcpy(name, buf);
+			sysfs_attr_init(&edev->d_attrs_muex[index].attr);
 			edev->d_attrs_muex[index].attr.name = name;
 			edev->d_attrs_muex[index].attr.mode = 0000;
 			edev->attrs_muex[index] = &edev->d_attrs_muex[index]
@@ -802,7 +806,7 @@ EXPORT_SYMBOL_GPL(extcon_dev_register);

 /**
 * extcon_dev_unregister() - Unregister the extcon device.
- * @edev:	the extcon device instance to be unregitered.
+ * @edev:	the extcon device instance to be unregistered.
 *
 * Note that this does not call kfree(edev) because edev was not allocated
 * by this class.
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -356,7 +356,7 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info,
 		extcon_set_cable_state(info->edev, "MHL", attached);
 		break;
 	default:
-		dev_err(info->dev, "faild to detect %s accessory\n",
+		dev_err(info->dev, "failed to detect %s accessory\n",
 			attached ? "attached" : "detached");
 		dev_err(info->dev, "- adc:0x%x, adclow:0x%x, adc1k:0x%x\n",
 			adc, adclow, adc1k);
@@ -548,7 +548,7 @@ static void max77693_muic_irq_work(struct work_struct *work)
 		curr_adc = info->status[0] & STATUS1_ADC_MASK;
 		curr_adc >>= STATUS1_ADC_SHIFT;

-		/* Check accossory state which is either detached or attached */
+		/* Check accessory state which is either detached or attached */
 		if (curr_adc == MAX77693_MUIC_ADC_OPEN)
 			attached = false;

@@ -564,7 +564,7 @@ static void max77693_muic_irq_work(struct work_struct *work)
 		curr_chg_type = info->status[1] & STATUS2_CHGTYP_MASK;
 		curr_chg_type >>= STATUS2_CHGTYP_SHIFT;

-		/* Check charger accossory state which
+		/* Check charger accessory state which
 		   is either detached or attached */
 		if (curr_chg_type == MAX77693_CHARGER_TYPE_NONE)
 			attached = false;
@@ -699,7 +699,7 @@ static int __devinit max77693_muic_probe(struct platform_device *pdev)

 		ret = request_threaded_irq(virq, NULL,
 				max77693_muic_irq_handler,
-				0, muic_irq->name, info);
+				IRQF_ONESHOT, muic_irq->name, info);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"failed: irq request (IRQ: %d,"