[MIPS] ARC: Get rid of mips_machgroup

This has not been any serious user of this ill conceived thing since the
original invention in like '95.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/au1000/db1x00/init.c

@@ -59,8 +59,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machgroup = MACH_GROUP_ALCHEMY;
-
 	/* Set the platform # */
 #if	defined (CONFIG_MIPS_DB1550)
 	mips_machtype = MACH_DB1550;

arch/mips/au1000/mtx-1/init.c

@@ -56,7 +56,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machgroup = MACH_GROUP_ALCHEMY;
 	mips_machtype = MACH_MTX1;	/* set the platform # */
 
 	prom_init_cmdline();

arch/mips/au1000/pb1000/init.c

@@ -54,7 +54,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machgroup = MACH_GROUP_ALCHEMY;
 	mips_machtype = MACH_PB1000;
 
 	prom_init_cmdline();

arch/mips/au1000/pb1100/init.c

@@ -55,7 +55,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg3;
 
-	mips_machgroup = MACH_GROUP_ALCHEMY;
 	mips_machtype = MACH_PB1100;
 
 	prom_init_cmdline();

arch/mips/au1000/pb1200/init.c

@@ -55,7 +55,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machgroup = MACH_GROUP_ALCHEMY;
 	mips_machtype = MACH_PB1200;
 
 	prom_init_cmdline();

arch/mips/au1000/pb1500/init.c

@@ -55,7 +55,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machgroup = MACH_GROUP_ALCHEMY;
 	mips_machtype = MACH_PB1500;
 
 	prom_init_cmdline();

arch/mips/au1000/pb1550/init.c

@@ -55,7 +55,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machgroup = MACH_GROUP_ALCHEMY;
 	mips_machtype = MACH_PB1550;
 
 	prom_init_cmdline();

arch/mips/au1000/xxs1500/init.c

@@ -54,7 +54,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machgroup = MACH_GROUP_ALCHEMY;
 	mips_machtype = MACH_XXS1500;	/* set the platform # */
 
 	prom_init_cmdline();

arch/mips/basler/excite/excite_prom.c

@@ -136,7 +136,6 @@ void __init prom_init(void)
 #	error 64 bit support not implemented
 #endif /* CONFIG_64BIT */
 
-	mips_machgroup = MACH_GROUP_TITAN;
 	mips_machtype = MACH_TITAN_EXCITE;
 }
 

arch/mips/cobalt/setup.c

@@ -114,8 +114,6 @@ void __init prom_init(void)
 	unsigned long memsz;
 	char **argv;
 
-	mips_machgroup = MACH_GROUP_COBALT;
-
 	memsz = fw_arg0 & 0x7fff0000;
 	narg = fw_arg0 & 0x0000ffff;
 

arch/mips/dec/prom/identify.c

@@ -133,9 +133,6 @@ void __init prom_identify_arch(u32 magic)
 	dec_firmrev = (dec_sysid & 0xff00) >> 8;
 	dec_etc = dec_sysid & 0xff;
 
-	/* We're obviously one of the DEC machines */
-	mips_machgroup = MACH_GROUP_DEC;
-
 	/*
 	 * FIXME: This may not be an exhaustive list of DECStations/Servers!
 	 * Put all model-specific initialisation calls here.

arch/mips/emma2rh/common/prom.c

@@ -62,8 +62,6 @@ void __init prom_init(void)
 		strcat(arcs_cmdline, " ");
 	}
 
-	mips_machgroup = MACH_GROUP_NEC_EMMA2RH;
-
 #if defined(CONFIG_MARKEINS)
 	mips_machtype = MACH_NEC_MARKEINS;
 	add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);

arch/mips/fw/arc/identify.c

@@ -22,7 +22,6 @@
 struct smatch {
 	char *arcname;
 	char *liname;
-	int group;
 	int type;
 	int flags;
 };
@@ -31,49 +30,41 @@ static struct smatch mach_table[] = {
 	{
 		.arcname	= "SGI-IP22",
 		.liname		= "SGI Indy",
-		.group		= MACH_GROUP_SGI,
 		.type		= MACH_SGI_IP22,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP27",
 		.liname		= "SGI Origin",
-		.group		= MACH_GROUP_SGI,
 		.type		= MACH_SGI_IP27,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP28",
 		.liname		= "SGI IP28",
-		.group		= MACH_GROUP_SGI,
 		.type		= MACH_SGI_IP28,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP30",
 		.liname		= "SGI Octane",
-		.group		= MACH_GROUP_SGI,
 		.type		= MACH_SGI_IP30,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP32",
 		.liname		= "SGI O2",
-		.group		= MACH_GROUP_SGI,
 		.type		= MACH_SGI_IP32,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "Microsoft-Jazz",
 		.liname		= "Jazz MIPS_Magnum_4000",
-		.group		= MACH_GROUP_JAZZ,
 		.type		= MACH_MIPS_MAGNUM_4000,
 		.flags		= 0,
 	}, {
 		.arcname	= "PICA-61",
 		.liname		= "Jazz Acer_PICA_61",
-		.group		= MACH_GROUP_JAZZ,
 		.type		= MACH_ACER_PICA_61,
 		.flags		= 0,
 	}, {
 		.arcname	= "RM200PCI",
 		.liname		= "SNI RM200_PCI",
-		.group		= MACH_GROUP_SNI_RM,
 		.type		= MACH_SNI_RM200_PCI,
 		.flags		= PROM_FLAG_DONT_FREE_TEMP,
 	}
@@ -125,7 +116,6 @@ void __init prom_identify_arch(void)
 	mach = string_to_mach(iname);
 	system_type = mach->liname;
 
-	mips_machgroup = mach->group;
 	mips_machtype = mach->type;
 	prom_flags = mach->flags;
 }

arch/mips/gt64120/wrppmc/setup.c

@@ -159,7 +159,6 @@ const char *get_system_type(void)
  */
 void __init prom_init(void)
 {
-	mips_machgroup = MACH_GROUP_WINDRIVER;
 	mips_machtype = MACH_WRPPMC;
 
 	add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM);

arch/mips/jmr3927/rbhma3100/init.c

@@ -51,7 +51,6 @@ void __init prom_init(void)
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
 		puts("Warning: TX3927 TLB off\n");
 #endif
-	mips_machgroup = MACH_GROUP_TOSHIBA;
 
 #ifdef CONFIG_TOSHIBA_JMR3927
 	mips_machtype = MACH_TOSHIBA_JMR3927;

arch/mips/kernel/setup.c

@@ -51,10 +51,8 @@ EXPORT_SYMBOL(PCI_DMA_BUS_IS_PHYS);
  * These are initialized so they are in the .data section
  */
 unsigned long mips_machtype __read_mostly = MACH_UNKNOWN;
-unsigned long mips_machgroup __read_mostly = MACH_GROUP_UNKNOWN;
 
 EXPORT_SYMBOL(mips_machtype);
-EXPORT_SYMBOL(mips_machgroup);
 
 struct boot_mem_map boot_mem_map;
 

arch/mips/lasat/prom.c

@@ -100,8 +100,6 @@ void __init prom_init(void)
 
 	lasat_init_board_info();		/* Read info from EEPROM */
 
-	mips_machgroup = MACH_GROUP_LASAT;
-
 	/* Get the command line */
 	if (argc > 0) {
 		strncpy(arcs_cmdline, argv[0], CL_SIZE-1);

arch/mips/lemote/lm2e/prom.c

@@ -57,7 +57,6 @@ void __init prom_init(void)
 	arg = (int *)fw_arg1;
 	env = (int *)fw_arg2;
 
-	mips_machgroup = MACH_GROUP_LEMOTE;
 	mips_machtype = MACH_LEMOTE_FULONG;
 
 	prom_init_cmdline();

arch/mips/philips/pnx8550/jbs/init.c

@@ -48,7 +48,6 @@ void __init prom_init(void)
 
 	unsigned long memsize;
 
-	mips_machgroup = MACH_GROUP_PHILIPS;
 	mips_machtype = MACH_PHILIPS_JBS;
 
 	//memsize = 0x02800000; /* Trimedia uses memory above */

arch/mips/philips/pnx8550/stb810/prom_init.c

@@ -41,7 +41,6 @@ void __init prom_init(void)
 
 	prom_init_cmdline();
 
-	mips_machgroup = MACH_GROUP_PHILIPS;
 	mips_machtype = MACH_PHILIPS_STB810;
 
 	memsize = 0x08000000; /* Trimedia uses memory above */

arch/mips/pmc-sierra/msp71xx/msp_setup.c

@@ -176,16 +176,13 @@ void __init prom_init(void)
 	case FAMILY_FPGA:
 		if (FPGA_IS_MSP4200(revision)) {
 			/* Old-style revision ID */
-			mips_machgroup = MACH_GROUP_MSP;
 			mips_machtype = MACH_MSP4200_FPGA;
 		} else {
-			mips_machgroup = MACH_GROUP_MSP;
 			mips_machtype = MACH_MSP_OTHER;
 		}
 		break;
 
 	case FAMILY_MSP4200:
-		mips_machgroup = MACH_GROUP_MSP;
 #if defined(CONFIG_PMC_MSP4200_EVAL)
 		mips_machtype  = MACH_MSP4200_EVAL;
 #elif defined(CONFIG_PMC_MSP4200_GW)
@@ -196,12 +193,10 @@ void __init prom_init(void)
 		break;
 
 	case FAMILY_MSP4200_FPGA:
-		mips_machgroup = MACH_GROUP_MSP;
 		mips_machtype  = MACH_MSP4200_FPGA;
 		break;
 
 	case FAMILY_MSP7100:
-		mips_machgroup = MACH_GROUP_MSP;
 #if defined(CONFIG_PMC_MSP7120_EVAL)
 		mips_machtype = MACH_MSP7120_EVAL;
 #elif defined(CONFIG_PMC_MSP7120_GW)
@@ -212,22 +207,14 @@ void __init prom_init(void)
 		break;
 
 	case FAMILY_MSP7100_FPGA:
-		mips_machgroup = MACH_GROUP_MSP;
 		mips_machtype  = MACH_MSP7120_FPGA;
 		break;
 
 	default:
 		/* we don't recognize the machine */
-		mips_machgroup = MACH_GROUP_UNKNOWN;
 		mips_machtype  = MACH_UNKNOWN;
-		break;
-	}
-
-	/* make sure we have the right initialization routine - sanity */
-	if (mips_machgroup != MACH_GROUP_MSP) {
-		ppfinit("Unknown machine group in a "
-			"MSP initialization routine\n");
 		panic("***Bogosity factor five***, exiting\n");
+		break;
 	}
 
 	prom_init_cmdline();

arch/mips/pmc-sierra/yosemite/prom.c

@@ -126,7 +126,6 @@ void __init prom_init(void)
 		env++;
 	}
 
-	mips_machgroup = MACH_GROUP_TITAN;
 	mips_machtype = MACH_TITAN_YOSEMITE;
 
 	prom_grab_secondary();

arch/mips/sibyte/cfe/setup.c

@@ -339,7 +339,6 @@ void __init prom_init(void)
 	/* Not sure this is needed, but it's the safe way. */
 	arcs_cmdline[CL_SIZE-1] = 0;
 
-	mips_machgroup = MACH_GROUP_SIBYTE;
 	prom_meminit();
 }
 

arch/mips/sibyte/sb1250/prom.c

@@ -83,7 +83,6 @@ void __init prom_init(void)
 
 	strcpy(arcs_cmdline, "root=/dev/ram0 ");
 
-	mips_machgroup = MACH_GROUP_SIBYTE;
 	prom_meminit();
 }
 

arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c

@@ -66,8 +66,6 @@ void __init prom_init(void)
 
 	prom_init_cmdline();
 
-	mips_machgroup = MACH_GROUP_TOSHIBA;
-
 	if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
 		mips_machtype = MACH_TOSHIBA_RBTX4927;
 		toshiba_name  = "TX4927";

arch/mips/tx4938/toshiba_rbtx4938/prom.c

@@ -47,7 +47,6 @@ void __init prom_init(void)
 #ifndef CONFIG_TX4938_NAND_BOOT
 	prom_init_cmdline();
 #endif
-	mips_machgroup = MACH_GROUP_TOSHIBA;
 	mips_machtype = MACH_TOSHIBA_RBTX4938;
 
 	msize = tx4938_get_mem_size();

arch/mips/vr41xx/nec-cmbvr4133/setup.c

@@ -64,7 +64,6 @@ static void __init nec_cmbvr4133_setup(void)
 #endif
 	set_io_port_base(KSEG1ADDR(0x16000000));
 
-	mips_machgroup = MACH_GROUP_NEC_VR41XX;
 	mips_machtype = MACH_NEC_CMBVR4133;
 
 #ifdef CONFIG_PCI