Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This update contains a fairly wide range of changes all over in sound
  subdirectory, mainly because of UAPI header moves by David and __dev*
  annotation removals by Bill.  Other highlights are:

   - Introduced the support for wallclock timestamps in ALSA PCM core

   - Add the poll loop implementation for HD-audio jack detection

   - Yet more VGA-switcheroo fixes for HD-audio

   - New VIA HD-audio codec support

   - More fixes on resource management in USB audio and MIDI drivers

   - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite,
     Roland VG-99, etc

   - Add support for FastTrack C400 usb-audio

   - Clean ups in many drivers regarding firmware loading

   - Add PSC724 Ultiimate Edge support to ice1712

   - A few hdspm driver updates

   - New Stanton SCS.1d/1m FireWire driver

   - Standardisation of the logging in ASoC codes

   - DT and dmaengine support for ASoC Atmel

   - Support for Wolfson ADSP cores

   - New drivers for Freescale/iVeia P1022 and Maxim MAX98090

   - Lots of other ASoC driver fixes and developments"

Fix up trivial conflicts.  And go out on a limb and assume the dts file
'status' field of one of the conflicting things was supposed to be
"disabled", not "disable" like in pretty much all other cases.

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
  ALSA: hda - Move runtime PM check to runtime_idle callback
  ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522
  ALSA: hda - Avoid doubly suspend after vga switcheroo
  ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3
  ALSA: hda - Check validity of CORB/RIRB WP reads
  ALSA: hda - use usleep_range in link reset and change timeout check
  ALSA: HDA: VIA: Add support for codec VT1808.
  ALSA: HDA: VIA Add support for codec VT1705CF.
  ASoC: codecs: remove __dev* attributes
  ASoC: utils: remove __dev* attributes
  ASoC: ux500: remove __dev* attributes
  ASoC: txx9: remove __dev* attributes
  ASoC: tegra: remove __dev* attributes
  ASoC: spear: remove __dev* attributes
  ASoC: sh: remove __dev* attributes
  ASoC: s6000: remove __dev* attributes
  ASoC: OMAP: remove __dev* attributes
  ASoC: nuc900: remove __dev* attributes
  ASoC: mxs: remove __dev* attributes
  ASoC: kirkwood: remove __dev* attributes
  ...

drivers/mfd/wm8994-core.c

@@ -401,13 +401,19 @@ static const struct reg_default wm1811_reva_patch[] = {
  */
 static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 {
-	struct wm8994_pdata *pdata = wm8994->dev->platform_data;
+	struct wm8994_pdata *pdata;
 	struct regmap_config *regmap_config;
 	const struct reg_default *regmap_patch = NULL;
 	const char *devname;
 	int ret, i, patch_regs;
 	int pulls = 0;
 
+	if (dev_get_platdata(wm8994->dev)) {
+		pdata = dev_get_platdata(wm8994->dev);
+		wm8994->pdata = *pdata;
+	}
+	pdata = &wm8994->pdata;
+
 	dev_set_drvdata(wm8994->dev, wm8994);
 
 	/* Add the on-chip regulators first for bootstrapping */
@@ -604,25 +610,22 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		}
 	}
 
-	if (pdata) {
-		wm8994->irq_base = pdata->irq_base;
-		wm8994->gpio_base = pdata->gpio_base;
+	wm8994->irq_base = pdata->irq_base;
+	wm8994->gpio_base = pdata->gpio_base;
 
-		/* GPIO configuration is only applied if it's non-zero */
-		for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
-			if (pdata->gpio_defaults[i]) {
-				wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
-						0xffff,
-						pdata->gpio_defaults[i]);
-			}
+	/* GPIO configuration is only applied if it's non-zero */
+	for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
+		if (pdata->gpio_defaults[i]) {
+			wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
+					0xffff, pdata->gpio_defaults[i]);
 		}
-
-		wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
-
-		if (pdata->spkmode_pu)
-			pulls |= WM8994_SPKMODE_PU;
 	}
 
+	wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
+
+	if (pdata->spkmode_pu)
+		pulls |= WM8994_SPKMODE_PU;
+
 	/* Disable unneeded pulls */
 	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
 			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |