Merge 4.1-rc7 into tty-next

This fixes up a merge issue with the amba-pl011.c driver, and we want
the fixes in this branch as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/input/joydev.c

@@ -747,6 +747,63 @@ static void joydev_cleanup(struct joydev *joydev)
 		input_close_device(handle);
 }
 
+static bool joydev_dev_is_absolute_mouse(struct input_dev *dev)
+{
+	DECLARE_BITMAP(jd_scratch, KEY_CNT);
+
+	BUILD_BUG_ON(ABS_CNT > KEY_CNT || EV_CNT > KEY_CNT);
+
+	/*
+	 * Virtualization (VMware, etc) and remote management (HP
+	 * ILO2) solutions use absolute coordinates for their virtual
+	 * pointing devices so that there is one-to-one relationship
+	 * between pointer position on the host screen and virtual
+	 * guest screen, and so their mice use ABS_X, ABS_Y and 3
+	 * primary button events. This clashes with what joydev
+	 * considers to be joysticks (a device with at minimum ABS_X
+	 * axis).
+	 *
+	 * Here we are trying to separate absolute mice from
+	 * joysticks. A device is, for joystick detection purposes,
+	 * considered to be an absolute mouse if the following is
+	 * true:
+	 *
+	 * 1) Event types are exactly EV_ABS, EV_KEY and EV_SYN.
+	 * 2) Absolute events are exactly ABS_X and ABS_Y.
+	 * 3) Keys are exactly BTN_LEFT, BTN_RIGHT and BTN_MIDDLE.
+	 * 4) Device is not on "Amiga" bus.
+	 */
+
+	bitmap_zero(jd_scratch, EV_CNT);
+	__set_bit(EV_ABS, jd_scratch);
+	__set_bit(EV_KEY, jd_scratch);
+	__set_bit(EV_SYN, jd_scratch);
+	if (!bitmap_equal(jd_scratch, dev->evbit, EV_CNT))
+		return false;
+
+	bitmap_zero(jd_scratch, ABS_CNT);
+	__set_bit(ABS_X, jd_scratch);
+	__set_bit(ABS_Y, jd_scratch);
+	if (!bitmap_equal(dev->absbit, jd_scratch, ABS_CNT))
+		return false;
+
+	bitmap_zero(jd_scratch, KEY_CNT);
+	__set_bit(BTN_LEFT, jd_scratch);
+	__set_bit(BTN_RIGHT, jd_scratch);
+	__set_bit(BTN_MIDDLE, jd_scratch);
+
+	if (!bitmap_equal(dev->keybit, jd_scratch, KEY_CNT))
+		return false;
+
+	/*
+	 * Amiga joystick (amijoy) historically uses left/middle/right
+	 * button events.
+	 */
+	if (dev->id.bustype == BUS_AMIGA)
+		return false;
+
+	return true;
+}
 
 static bool joydev_match(struct input_handler *handler, struct input_dev *dev)
 {
@@ -758,6 +815,10 @@ static bool joydev_match(struct input_handler *handler, struct input_dev *dev)
 	if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit))
 		return false;
 
+	/* Avoid absolute mice */
+	if (joydev_dev_is_absolute_mouse(dev))
+		return false;
+
 	return true;
 }
 

drivers/input/mouse/Kconfig

@@ -156,7 +156,7 @@ config MOUSE_PS2_VMMOUSE
 	  Say Y here if you are running under control of VMware hypervisor
 	  (ESXi, Workstation or Fusion). Also make sure that when you enable
 	  this option, you remove the xf86-input-vmmouse user-space driver
-	  or upgrade it to at least xf86-input-vmmouse 13.0.1, which doesn't
+	  or upgrade it to at least xf86-input-vmmouse 13.1.0, which doesn't
 	  load in the presence of an in-kernel vmmouse driver.
 
 	  If unsure, say N.

drivers/input/mouse/alps.c

@@ -941,6 +941,11 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt,
 	case V7_PACKET_ID_TWO:
 		mt[1].x &= ~0x000F;
 		mt[1].y |= 0x000F;
+		/* Detect false-postive touches where x & y report max value */
+		if (mt[1].y == 0x7ff && mt[1].x == 0xff0) {
+			mt[1].x = 0;
+			/* y gets set to 0 at the end of this function */
+		}
 		break;
 
 	case V7_PACKET_ID_MULTI:
@@ -1058,9 +1063,8 @@ static void alps_process_trackstick_packet_v7(struct psmouse *psmouse)
 	right = (packet[1] & 0x02) >> 1;
 	middle = (packet[1] & 0x04) >> 2;
 
-	/* Divide 2 since trackpoint's speed is too fast */
-	input_report_rel(dev2, REL_X, (char)x / 2);
-	input_report_rel(dev2, REL_Y, -((char)y / 2));
+	input_report_rel(dev2, REL_X, (char)x);
+	input_report_rel(dev2, REL_Y, -((char)y));
 
 	input_report_key(dev2, BTN_LEFT, left);
 	input_report_key(dev2, BTN_RIGHT, right);

drivers/input/mouse/elantech.c

@@ -315,7 +315,7 @@ static void elantech_report_semi_mt_data(struct input_dev *dev,
 					 unsigned int x2, unsigned int y2)
 {
 	elantech_set_slot(dev, 0, num_fingers != 0, x1, y1);
-	elantech_set_slot(dev, 1, num_fingers == 2, x2, y2);
+	elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2);
 }
 
 /*
@@ -1376,10 +1376,11 @@ static bool elantech_is_signature_valid(const unsigned char *param)
 		return true;
 
 	/*
-	 * Some models have a revision higher then 20. Meaning param[2] may
-	 * be 10 or 20, skip the rates check for these.
+	 * Some hw_version >= 4 models have a revision higher then 20. Meaning
+	 * that param[2] may be 10 or 20, skip the rates check for these.
 	 */
-	if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40)
+	if ((param[0] & 0x0f) >= 0x06 && (param[1] & 0xaf) == 0x0f &&
+	    param[2] < 40)
 		return true;
 
 	for (i = 0; i < ARRAY_SIZE(rates); i++)
@@ -1555,6 +1556,7 @@ static int elantech_set_properties(struct elantech_data *etd)
 		case 9:
 		case 10:
 		case 13:
+		case 14:
 			etd->hw_version = 4;
 			break;
 		default:

drivers/input/touchscreen/stmpe-ts.c

@@ -164,7 +164,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data)
 			STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN);
 
 	/* start polling for touch_det to detect release */
-	schedule_delayed_work(&ts->work, HZ / 50);
+	schedule_delayed_work(&ts->work, msecs_to_jiffies(50));
 
 	return IRQ_HANDLED;
 }

drivers/input/touchscreen/sx8654.c

@@ -187,7 +187,7 @@ static int sx8654_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	input = devm_input_allocate_device(&client->dev);
-	if (!sx8654)
+	if (!input)
 		return -ENOMEM;
 
 	input->name = "SX8654 I2C Touchscreen";