Merge branch 'linus' into x86/urgent, to pick up dependent changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

.clang-format

@@ -387,14 +387,14 @@ ForEachMacros:
   - 'rhl_for_each_entry_rcu'
   - 'rhl_for_each_rcu'
   - 'rht_for_each'
-  - 'rht_for_each_continue'
+  - 'rht_for_each_from'
   - 'rht_for_each_entry'
-  - 'rht_for_each_entry_continue'
+  - 'rht_for_each_entry_from'
   - 'rht_for_each_entry_rcu'
-  - 'rht_for_each_entry_rcu_continue'
+  - 'rht_for_each_entry_rcu_from'
   - 'rht_for_each_entry_safe'
   - 'rht_for_each_rcu'
-  - 'rht_for_each_rcu_continue'
+  - 'rht_for_each_rcu_from'
   - '__rq_for_each_bio'
   - 'rq_for_each_bvec'
   - 'rq_for_each_segment'

.gitignore

@@ -58,6 +58,7 @@ modules.builtin
 /vmlinuz
 /System.map
 /Module.markers
+/modules.builtin.modinfo
 
 #
 # RPM spec file (make rpm-pkg)
@@ -90,10 +91,10 @@ modules.builtin
 #
 # Generated include files
 #
-include/config
+/include/config/
-include/generated
+/include/generated/
-include/ksym
+/include/ksym/
-arch/*/include/generated
+/arch/*/include/generated/
 
 # stgit generated dirs
 patches-*
@@ -129,7 +130,12 @@ signing_key.x509
 x509.genkey
 
 # Kconfig presets
-all.config
+/all.config
+/alldef.config
+/allmod.config
+/allno.config
+/allrandom.config
+/allyes.config
 
 # Kdevelop4
 *.kdev4

.mailmap

@@ -16,6 +16,11 @@ Alan Cox <alan@lxorguk.ukuu.org.uk>
 Alan Cox <root@hraefn.swansea.linux.org.uk>
 Aleksey Gorelov <aleksey_gorelov@phoenix.com>
 Aleksandar Markovic <aleksandar.markovic@mips.com> <aleksandar.markovic@imgtec.com>
+Alex Shi <alex.shi@linux.alibaba.com> <alex.shi@intel.com>
+Alex Shi <alex.shi@linux.alibaba.com> <alex.shi@linaro.org>
+Alexei Starovoitov <ast@kernel.org> <ast@plumgrid.com>
+Alexei Starovoitov <ast@kernel.org> <alexei.starovoitov@gmail.com>
+Alexei Starovoitov <ast@kernel.org> <ast@fb.com>
 Al Viro <viro@ftp.linux.org.uk>
 Al Viro <viro@zenIV.linux.org.uk>
 Andi Shyti <andi@etezian.org> <andi.shyti@samsung.com>
@@ -46,6 +51,12 @@ Christoph Hellwig <hch@lst.de>
 Christophe Ricard <christophe.ricard@gmail.com>
 Corey Minyard <minyard@acm.org>
 Damian Hobson-Garcia <dhobsong@igel.co.jp>
+Daniel Borkmann <daniel@iogearbox.net> <dborkman@redhat.com>
+Daniel Borkmann <daniel@iogearbox.net> <dborkmann@redhat.com>
+Daniel Borkmann <daniel@iogearbox.net> <danborkmann@iogearbox.net>
+Daniel Borkmann <daniel@iogearbox.net> <daniel.borkmann@tik.ee.ethz.ch>
+Daniel Borkmann <daniel@iogearbox.net> <danborkmann@googlemail.com>
+Daniel Borkmann <daniel@iogearbox.net> <dxchgb@gmail.com>
 David Brownell <david-b@pacbell.net>
 David Woodhouse <dwmw2@shinybook.infradead.org>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@mips.com>
@@ -117,6 +128,8 @@ Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
+Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
+Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
 Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Mark Brown <broonie@sirena.org.uk>
@@ -189,6 +202,7 @@ Santosh Shilimkar <ssantosh@kernel.org>
 Santosh Shilimkar <santosh.shilimkar@oracle.org>
 Sascha Hauer <s.hauer@pengutronix.de>
 S.Çağlar Onur <caglar@pardus.org.tr>
+Sean Nyekjaer <sean@geanix.com> <sean.nyekjaer@prevas.dk>
 Sebastian Reichel <sre@kernel.org> <sre@debian.org>
 Sebastian Reichel <sre@kernel.org> <sebastian.reichel@collabora.co.uk>
 Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
@@ -207,6 +221,8 @@ Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Thomas Pedersen <twp@codeaurora.org>
 Tony Luck <tony.luck@intel.com>
+TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
+TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <ukl@pengutronix.de>

Documentation/ABI/obsolete/sysfs-class-net-batman-adv

@@ -1,3 +1,5 @@
+This ABI is deprecated and will be removed after 2021. It is
+replaced with the batadv generic netlink family.
 
 What:           /sys/class/net/<iface>/batman-adv/elp_interval
 Date:           Feb 2014

Documentation/ABI/obsolete/sysfs-class-net-mesh

@@ -1,3 +1,5 @@
+This ABI is deprecated and will be removed after 2021. It is
+replaced with the batadv generic netlink family.
 
 What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
 Date:           May 2010

Documentation/ABI/stable/sysfs-bus-nvmem

@@ -6,6 +6,8 @@ Description:
 		This file allows user to read/write the raw NVMEM contents.
 		Permissions for write to this file depends on the nvmem
 		provider configuration.
+		Note: This file is only present if CONFIG_NVMEM_SYSFS
+		is enabled
 
 		ex:
 		hexdump /sys/bus/nvmem/devices/qfprom0/nvmem

Documentation/ABI/stable/sysfs-bus-vmbus

@@ -81,7 +81,9 @@ What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/latency
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Channel signaling latency
+Description:	Channel signaling latency. This file is available only for
+		performance critical channels (storage, network, etc.) that use
+		the monitor page mechanism.
 Users:		Debugging tools
 
 What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/out_mask
@@ -95,7 +97,9 @@ What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/pending
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Channel interrupt pending state
+Description:	Channel interrupt pending state. This file is available only for
+		performance critical channels (storage, network, etc.) that use
+		the monitor page mechanism.
 Users:		Debugging tools
 
 What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/read_avail
@@ -137,7 +141,9 @@ What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/monitor_id
 Date:		January. 2018
 KernelVersion:	4.16
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
-Description:	Monitor bit associated with channel
+Description:	Monitor bit associated with channel. This file is available only
+		for performance critical channels (storage, network, etc.) that
+		use the monitor page mechanism.
 Users:		Debugging tools and userspace drivers
 
 What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/ring

Documentation/ABI/stable/sysfs-devices-node

@@ -90,4 +90,89 @@ Date:		December 2009
 Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
 Description:
 		The node's huge page size control/query attributes.
-		See Documentation/admin-guide/mm/hugetlbpage.rst
+		See Documentation/admin-guide/mm/hugetlbpage.rst
+
+What:		/sys/devices/system/node/nodeX/accessY/
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The node's relationship to other nodes for access class "Y".
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The directory containing symlinks to memory initiator
+		nodes that have class "Y" access to this target node's
+		memory. CPUs and other memory initiators in nodes not in
+		the list accessing this node's memory may have different
+		performance.
+
+What:		/sys/devices/system/node/nodeX/accessY/targets/
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The directory containing symlinks to memory targets that
+		this initiator node has class "Y" access.
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/read_bandwidth
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		This node's read bandwidth in MB/s when accessed from
+		nodes found in this access class's linked initiators.
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/read_latency
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		This node's read latency in nanoseconds when accessed
+		from nodes found in this access class's linked initiators.
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/write_bandwidth
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		This node's write bandwidth in MB/s when accessed from
+		found in this access class's linked initiators.
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/write_latency
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		This node's write latency in nanoseconds when access
+		from nodes found in this class's linked initiators.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The directory containing attributes for the memory-side cache
+		level 'Y'.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/indexing
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The caches associativity indexing: 0 for direct mapped,
+		non-zero if indexed.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/line_size
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The number of bytes accessed from the next cache level on a
+		cache miss.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/size
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The size of this memory side cache in bytes.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/write_policy
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The cache write policy: 0 for write-back, 1 for write-through,
+		other or unknown.

Documentation/ABI/testing/debugfs-wilco-ec

@@ -1,23 +1,46 @@
+What:		/sys/kernel/debug/wilco_ec/h1_gpio
+Date:		April 2019
+KernelVersion:	5.2
+Description:
+		As part of Chrome OS's FAFT (Fully Automated Firmware Testing)
+		tests, we need to ensure that the H1 chip is properly setting
+		some GPIO lines. The h1_gpio attribute exposes the state
+		of the lines:
+		- ENTRY_TO_FACT_MODE in BIT(0)
+		- SPI_CHROME_SEL in BIT(1)
+
+		Output will formatted with "0x%02x\n".
+
 What:		/sys/kernel/debug/wilco_ec/raw
 Date:		January 2019
 KernelVersion:	5.1
 Description:
 		Write and read raw mailbox commands to the EC.
 
-		For writing:
+		You can write a hexadecimal sentence to raw, and that series of
-		Bytes 0-1 indicate the message type:
+		bytes will be sent to the EC. Then, you can read the bytes of
-			00 F0 = Execute Legacy Command
+		response by reading from raw.
-			00 F2 = Read/Write NVRAM Property
-		Byte 2 provides the command code
-		Bytes 3+ consist of the data passed in the request
 
-		At least three bytes are required, for the msg type and command,
+		For writing, bytes 0-1 indicate the message type, one of enum
-		with additional bytes optional for additional data.
+		wilco_ec_msg_type. Byte 2+ consist of the data passed in the
+		request, starting at MBOX[0]
+
+		At least three bytes are required for writing, two for the type
+		and at least a single byte of data. Only the first
+		EC_MAILBOX_DATA_SIZE bytes of MBOX will be used.
 
 		Example:
 		// Request EC info type 3 (EC firmware build date)
-		$ echo 00 f0 38 00 03 00 > raw
+		// Corresponds with sending type 0x00f0 with
+		// MBOX = [38, 00, 03, 00]
+		$ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
 		// View the result. The decoded ASCII result "12/21/18" is
 		// included after the raw hex.
-		$ cat raw
+		// Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
-		00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  .12/21/18.8...
+		$ cat /sys/kernel/debug/wilco_ec/raw
+		00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  ..12/21/18.8...
+
+		Note that the first 32 bytes of the received MBOX[] will be
+		printed, even if some of the data is junk. It is up to you to
+		know how many of the first bytes of data are the actual
+		response.

Documentation/ABI/testing/sysfs-bus-counter

@@ -0,0 +1,230 @@
+What:		/sys/bus/counter/devices/counterX/countY/count
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Count data of Count Y represented as a string.
+
+What:		/sys/bus/counter/devices/counterX/countY/ceiling
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Count value ceiling for Count Y. This is the upper limit for the
+		respective counter.
+
+What:		/sys/bus/counter/devices/counterX/countY/floor
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Count value floor for Count Y. This is the lower limit for the
+		respective counter.
+
+What:		/sys/bus/counter/devices/counterX/countY/count_mode
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Count mode for channel Y. The ceiling and floor values for
+		Count Y are used by the count mode where required. The following
+		count modes are available:
+
+		normal:
+			Counting is continuous in either direction.
+
+		range limit:
+			An upper or lower limit is set, mimicking limit switches
+			in the mechanical counterpart. The upper limit is set to
+			the Count Y ceiling value, while the lower limit is set
+			to the Count Y floor value. The counter freezes at
+			count = ceiling when counting up, and at count = floor
+			when counting down. At either of these limits, the
+			counting is resumed only when the count direction is
+			reversed.
+
+		non-recycle:
+			The counter is disabled whenever a counter overflow or
+			underflow takes place. The counter is re-enabled when a
+			new count value is loaded to the counter via a preset
+			operation or direct write.
+
+		modulo-n:
+			A count value boundary is set between the Count Y floor
+			value and the Count Y ceiling value. The counter is
+			reset to the Count Y floor value at count = ceiling when
+			counting up, while the counter is set to the Count Y
+			ceiling value at count = floor when counting down; the
+			counter does not freeze at the boundary points, but
+			counts continuously throughout.
+
+What:		/sys/bus/counter/devices/counterX/countY/count_mode_available
+What:		/sys/bus/counter/devices/counterX/countY/error_noise_available
+What:		/sys/bus/counter/devices/counterX/countY/function_available
+What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_available
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Discrete set of available values for the respective Count Y
+		configuration are listed in this file. Values are delimited by
+		newline characters.
+
+What:		/sys/bus/counter/devices/counterX/countY/direction
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the count direction of Count
+		Y. Two count directions are available: forward and backward.
+
+		Some counter devices are able to determine the direction of
+		their counting. For example, quadrature encoding counters can
+		determine the direction of movement by evaluating the leading
+		phase of the respective A and B quadrature encoding signals.
+		This attribute exposes such count directions.
+
+What:		/sys/bus/counter/devices/counterX/countY/enable
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Whether channel Y counter is enabled. Valid attribute values are
+		boolean.
+
+		This attribute is intended to serve as a pause/unpause mechanism
+		for Count Y. Suppose a counter device is used to count the total
+		movement of a conveyor belt: this attribute allows an operator
+		to temporarily pause the counter, service the conveyor belt,
+		and then finally unpause the counter to continue where it had
+		left off.
+
+What:		/sys/bus/counter/devices/counterX/countY/error_noise
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates whether excessive noise is
+		present at the channel Y counter inputs.
+
+What:		/sys/bus/counter/devices/counterX/countY/function
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Count function mode of Count Y; count function evaluation is
+		triggered by conditions specified by the Count Y signalZ_action
+		attributes. The following count functions are available:
+
+		increase:
+			Accumulated count is incremented.
+
+		decrease:
+			Accumulated count is decremented.
+
+		pulse-direction:
+			Rising edges on signal A updates the respective count.
+			The input level of signal B determines direction.
+
+		quadrature x1 a:
+			If direction is forward, rising edges on quadrature pair
+			signal A updates the respective count; if the direction
+			is backward, falling edges on quadrature pair signal A
+			updates the respective count. Quadrature encoding
+			determines the direction.
+
+		quadrature x1 b:
+			If direction is forward, rising edges on quadrature pair
+			signal B updates the respective count; if the direction
+			is backward, falling edges on quadrature pair signal B
+			updates the respective count. Quadrature encoding
+			determines the direction.
+
+		quadrature x2 a:
+			Any state transition on quadrature pair signal A updates
+			the respective count. Quadrature encoding determines the
+			direction.
+
+		quadrature x2 b:
+			Any state transition on quadrature pair signal B updates
+			the respective count. Quadrature encoding determines the
+			direction.
+
+		quadrature x4:
+			Any state transition on either quadrature pair signals
+			updates	the respective count. Quadrature encoding
+			determines the direction.
+
+What:		/sys/bus/counter/devices/counterX/countY/name
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the device-specific name of
+		Count Y. If possible, this should match the name of the
+		respective channel as it appears in the device datasheet.
+
+What:		/sys/bus/counter/devices/counterX/countY/preset
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		If the counter device supports preset registers -- registers
+		used to load counter channels to a set count upon device-defined
+		preset operation trigger events -- the preset count for channel
+		Y is provided by this attribute.
+
+What:		/sys/bus/counter/devices/counterX/countY/preset_enable
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Whether channel Y counter preset operation is enabled. Valid
+		attribute values are boolean.
+
+What:		/sys/bus/counter/devices/counterX/countY/signalZ_action
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Action mode of Count Y for Signal Z. This attribute indicates
+		the condition of Signal Z that triggers the count function
+		evaluation for Count Y. The following action modes are
+		available:
+
+		none:
+			Signal does not trigger the count function. In
+			Pulse-Direction count function mode, this Signal is
+			evaluated as Direction.
+
+		rising edge:
+			Low state transitions to high state.
+
+		falling edge:
+			High state transitions to low state.
+
+		both edges:
+			Any state transition.
+
+What:		/sys/bus/counter/devices/counterX/name
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the device-specific name of
+		the Counter. This should match the name of the device as it
+		appears in its respective datasheet.
+
+What:		/sys/bus/counter/devices/counterX/num_counts
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the total number of Counts
+		belonging to the Counter.
+
+What:		/sys/bus/counter/devices/counterX/num_signals
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the total number of Signals
+		belonging to the Counter.
+
+What:		/sys/bus/counter/devices/counterX/signalY/signal
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Signal data of Signal Y represented as a string.
+
+What:		/sys/bus/counter/devices/counterX/signalY/name
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the device-specific name of
+		Signal Y. If possible, this should match the name of the
+		respective signal as it appears in the device datasheet.

Documentation/ABI/testing/sysfs-bus-counter-104-quad-8

@@ -0,0 +1,36 @@
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Active level of index input Signal Y; irrelevant in
+		non-synchronous load mode.
+
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_available
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_available
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Discrete set of available values for the respective Signal Y
+		configuration are listed in this file.
+
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Configure the counter associated with Signal Y for
+		non-synchronous or synchronous load mode. Synchronous load mode
+		cannot be selected in non-quadrature (Pulse-Direction) clock
+		mode.
+
+		non-synchronous:
+			A logic low level is the active level at this index
+			input. The index function (as enabled via preset_enable)
+			is performed directly on the active level of the index
+			input.
+
+		synchronous:
+			Intended for interfacing with encoder Index output in
+			quadrature clock mode. The active level is configured
+			via index_polarity. The index function (as enabled via
+			preset_enable) is performed synchronously with the
+			quadrature clock on the active level of the index input.

Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec

@@ -0,0 +1,16 @@
+What:		/sys/bus/counter/devices/counterX/countY/prescaler_available
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Discrete set of available values for the respective Count Y
+		configuration are listed in this file. Values are delimited by
+		newline characters.
+
+What:		/sys/bus/counter/devices/counterX/countY/prescaler
+KernelVersion:	5.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Configure the prescaler value associated with Count Y.
+		On the FlexTimer, the counter clock source passes through a
+		prescaler (i.e. a counter). This acts like a clock
+		divider.

Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x

@@ -0,0 +1,20 @@
+What:		/sys/bus/i2c/.../idle_state
+Date:		January 2019
+KernelVersion:	5.2
+Contact:	Robert Shearman <robert.shearman@att.com>
+Description:
+		Value that exists only for mux devices that can be
+		written to control the behaviour of the multiplexer on
+		idle. Possible values:
+		-2 - disconnect on idle, i.e. deselect the last used
+		     channel, which is useful when there is a device
+		     with an address that conflicts with another
+		     device on another mux on the same parent bus.
+		-1 - leave the mux as-is, which is the most optimal
+		     setting in terms of I2C operations and is the
+		     default mode.
+		0..<nchans> - set the mux to a predetermined channel,
+		     which is useful if there is one channel that is
+		     used almost always, and you want to reduce the
+		     latency for normal operations after rare
+		     transactions on other channels

Documentation/ABI/testing/sysfs-bus-iio

@@ -1656,6 +1656,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_countY_raw
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Raw counter device counts from channel Y. For quadrature
 		counters, multiplication by an available [Y]_scale results in
 		the counts of a single quadrature signal phase from channel Y.
@@ -1664,6 +1666,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_raw
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Raw counter device index value from channel Y. This attribute
 		provides an absolute positional reference (e.g. a pulse once per
 		revolution) which may be used to home positional systems as
@@ -1673,6 +1677,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available
 KernelVersion:	4.12
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		A list of possible counting directions which are:
 		- "up"	: counter device is increasing.
 		- "down": counter device is decreasing.
@@ -1681,6 +1687,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_direction
 KernelVersion:	4.12
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Raw counter device counters direction for channel Y.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_phaseY_raw

Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8

@@ -6,6 +6,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Discrete set of available values for the respective counter
 		configuration are listed in this file.
 
@@ -13,6 +15,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_countY_count_mode
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Count mode for channel Y. Four count modes are available:
 		normal, range limit, non-recycle, and modulo-n. The preset value
 		for channel Y is used by the count mode where required.
@@ -47,6 +51,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_countY_noise_error
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Read-only attribute that indicates whether excessive noise is
 		present at the channel Y count inputs in quadrature clock mode;
 		irrelevant in non-quadrature clock mode.
@@ -55,6 +61,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_countY_preset
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		If the counter device supports preset registers, the preset
 		count for channel Y is provided by this attribute.
 
@@ -62,6 +70,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Configure channel Y counter for non-quadrature or quadrature
 		clock mode. Selecting non-quadrature clock mode will disable
 		synchronous load mode. In quadrature clock mode, the channel Y
@@ -83,6 +93,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Whether to set channel Y counter with channel Y preset value
 		when channel Y index input is active, or continuously count.
 		Valid attribute values are boolean.
@@ -91,6 +103,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Active level of channel Y index input; irrelevant in
 		non-synchronous load mode.
 
@@ -98,6 +112,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode
 KernelVersion:	4.10
 Contact:	linux-iio@vger.kernel.org
 Description:
+		This interface is deprecated; please use the Counter subsystem.
+
 		Configure channel Y counter for non-synchronous or synchronous
 		load mode. Synchronous load mode cannot be selected in
 		non-quadrature clock mode.

Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933

@@ -1,26 +1,31 @@
-What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_start
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_start
+Date:		March 2019
 KernelVersion:	3.1.0
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Frequency sweep start frequency in Hz.
 
-What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_increment
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_increment
+Date:		March 2019
 KernelVersion:	3.1.0
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Frequency increment in Hz (step size) between consecutive
 		frequency points along the sweep.
 
-What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_points
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_points
+Date:		March 2019
 KernelVersion:	3.1.0
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Number of frequency points (steps) in the frequency sweep.
-		This value, in conjunction with the outY_freq_start and the
+		This value, in conjunction with the
-		outY_freq_increment, determines the frequency sweep range
+		out_altvoltageY_frequency_start and the
-		for the sweep operation.
+		out_altvoltageY_frequency_increment, determines the frequency
+		sweep range for the sweep operation.
 
-What:		/sys/bus/iio/devices/iio:deviceX/outY_settling_cycles
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_settling_cycles
+Date:		March 2019
 KernelVersion:	3.1.0
 Contact:	linux-iio@vger.kernel.org
 Description:

Documentation/ABI/testing/sysfs-bus-iio-sps30

@@ -1,6 +1,6 @@
 What:		/sys/bus/iio/devices/iio:deviceX/start_cleaning
 Date:		December 2018
-KernelVersion:	4.22
+KernelVersion:	5.0
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Writing 1 starts sensor self cleaning. Internal fan accelerates

Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856

@@ -0,0 +1,24 @@
+What:		/sys/bus/iio/devices/iio:deviceX/fault_oc
+KernelVersion:	5.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Open-circuit fault. The detection of open-circuit faults,
+		such as those caused by broken thermocouple wires.
+		Reading returns either '1' or '0'.
+		'1' = An open circuit such as broken thermocouple wires
+		      has been detected.
+		'0' = No open circuit or broken thermocouple wires are detected
+
+What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
+KernelVersion:	5.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Overvoltage or Undervoltage Input Fault. The internal circuitry
+		is protected from excessive voltages applied to the thermocouple
+		cables by integrated MOSFETs at the T+ and T- inputs, and the
+		BIAS output. These MOSFETs turn off when the input voltage is
+		negative or greater than VDD.
+		Reading returns either '1' or '0'.
+		'1' = The input voltage is negative or greater than VDD.
+		'0' = The input voltage is positive and less than VDD (normal
+		state).

Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc

@@ -30,4 +30,12 @@ Description:	(RW) Configure MSC buffer size for "single" or "multi" modes.
 		there are no active users and tracing is not enabled) and then
 		allocates a new one.
 
+What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/win_switch
+Date:		May 2019
+KernelVersion:	5.2
+Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+Description:	(RW) Trigger window switch for the MSC's buffer, in
+		multi-window mode. In "multi" mode, accepts writes of "1", thereby
+		triggering a window switch for the buffer. Returns an error in any
+		other operating mode or attempts to write something other than "1".
 

Documentation/ABI/testing/sysfs-class-mei

@@ -65,3 +65,18 @@ Description:	Display the ME firmware version.
 		<platform>:<major>.<minor>.<milestone>.<build_no>.
 		There can be up to three such blocks for different
 		FW components.
+
+What:		/sys/class/mei/meiN/dev_state
+Date:		Mar 2019
+KernelVersion:	5.1
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:	Display the ME device state.
+
+		The device state can have following values:
+		INITIALIZING
+		INIT_CLIENTS
+		ENABLED
+		RESETTING
+		DISABLED
+		POWER_DOWN
+		POWER_UP

Documentation/ABI/testing/sysfs-devices-platform-ipmi

@@ -212,7 +212,7 @@ Description:
 					Messages may be broken into parts if
 					they are long.
 
-		receieved_messages:	(RO) Number of message responses
+		received_messages:	(RO) Number of message responses
 					received.
 
 		received_message_parts: (RO) Number of message fragments

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -484,6 +484,7 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/spectre_v2
 		/sys/devices/system/cpu/vulnerabilities/spec_store_bypass
 		/sys/devices/system/cpu/vulnerabilities/l1tf
+		/sys/devices/system/cpu/vulnerabilities/mds
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
@@ -496,8 +497,7 @@ Description:	Information about CPU vulnerabilities
 		"Vulnerable"	  CPU is affected and no mitigation in effect
 		"Mitigation: $M"  CPU is affected and mitigation $M is in effect
 
-		Details about the l1tf file can be found in
+		See also: Documentation/admin-guide/hw-vuln/index.rst
-		Documentation/admin-guide/l1tf.rst
 
 What:		/sys/devices/system/cpu/smt
 		/sys/devices/system/cpu/smt/active

Documentation/ABI/testing/sysfs-driver-ucsi-ccg

@@ -0,0 +1,6 @@
+What:		/sys/bus/i2c/drivers/ucsi_ccg/.../do_flash
+Date:		May 2019
+Contact:	Ajay Gupta <ajayg@nvidia.com>
+Description:
+		Tell the driver for Cypress CCGx Type-C controller to attempt
+		firmware upgrade by writing [Yy1] to the file.

Documentation/ABI/testing/sysfs-kernel-livepatch

@@ -45,7 +45,7 @@ Description:
 		use this feature without a clearance from a patch
 		distributor. Removal (rmmod) of patch modules is permanently
 		disabled when the feature is used. See
-		Documentation/livepatch/livepatch.txt for more information.
+		Documentation/livepatch/livepatch.rst for more information.
 
 What:		/sys/kernel/livepatch/<patch>/<object>
 Date:		Nov 2014

Documentation/ABI/testing/usb-uevent

@@ -0,0 +1,27 @@
+What:		Raise a uevent when a USB Host Controller has died
+Date:		2019-04-17
+KernelVersion:	5.2
+Contact:	linux-usb@vger.kernel.org
+Description:	When the USB Host Controller has entered a state where it is no
+		longer functional a uevent will be raised. The uevent will
+		contain ACTION=offline and ERROR=DEAD.
+
+		Here is an example taken using udevadm monitor -p:
+
+		KERNEL[130.428945] offline  /devices/pci0000:00/0000:00:10.0/usb2 (usb)
+		ACTION=offline
+		BUSNUM=002
+		DEVNAME=/dev/bus/usb/002/001
+		DEVNUM=001
+		DEVPATH=/devices/pci0000:00/0000:00:10.0/usb2
+		DEVTYPE=usb_device
+		DRIVER=usb
+		ERROR=DEAD
+		MAJOR=189
+		MINOR=128
+		PRODUCT=1d6b/2/414
+		SEQNUM=2168
+		SUBSYSTEM=usb
+		TYPE=9/0/1
+
+Users:		chromium-os-dev@chromium.org

Documentation/DMA-API-HOWTO.txt

@@ -147,7 +147,7 @@ networking subsystems make sure that the buffers they use are valid
 for you to DMA from/to.
 
 DMA addressing capabilities
-==========================
+===========================
 
 By default, the kernel assumes that your device can address 32-bits of DMA
 addressing.  For a 64-bit capable device, this needs to be increased, and for
@@ -365,13 +365,12 @@ __get_free_pages() (but takes size instead of a page order).  If your
 driver needs regions sized smaller than a page, you may prefer using
 the dma_pool interface, described below.
 
-The consistent DMA mapping interfaces, for non-NULL dev, will by
+The consistent DMA mapping interfaces, will by default return a DMA address
-default return a DMA address which is 32-bit addressable.  Even if the
+which is 32-bit addressable.  Even if the device indicates (via the DMA mask)
-device indicates (via DMA mask) that it may address the upper 32-bits,
+that it may address the upper 32-bits, consistent allocation will only
-consistent allocation will only return > 32-bit addresses for DMA if
+return > 32-bit addresses for DMA if the consistent DMA mask has been
-the consistent DMA mask has been explicitly changed via
+explicitly changed via dma_set_coherent_mask().  This is true of the
-dma_set_coherent_mask().  This is true of the dma_pool interface as
+dma_pool interface as well.
-well.
 
 dma_alloc_coherent() returns two values: the virtual address which you
 can use to access it from the CPU and dma_handle which you pass to the

Documentation/Makefile

@@ -28,8 +28,13 @@ ifeq ($(HAVE_SPHINX),0)
 
 else # HAVE_SPHINX
 
-# User-friendly check for pdflatex
+# User-friendly check for pdflatex and latexmk
 HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi)
+HAVE_LATEXMK := $(shell if which latexmk >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+ifeq ($(HAVE_LATEXMK),1)
+	PDFLATEX := latexmk -$(PDFLATEX)
+endif #HAVE_LATEXMK
 
 # Internal variables.
 PAPEROPT_a4     = -D latex_paper_size=a4
@@ -82,7 +87,7 @@ pdfdocs:
 else # HAVE_PDFLATEX
 
 pdfdocs: latexdocs
-	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
+	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX="$(PDFLATEX)" LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
 
 endif # HAVE_PDFLATEX
 

Documentation/accounting/psi.txt

@@ -63,6 +63,110 @@ as well as medium and long term trends. The total absolute stall time
 spikes which wouldn't necessarily make a dent in the time averages,
 or to average trends over custom time frames.
 
+Monitoring for pressure thresholds
+==================================
+
+Users can register triggers and use poll() to be woken up when resource
+pressure exceeds certain thresholds.
+
+A trigger describes the maximum cumulative stall time over a specific
+time window, e.g. 100ms of total stall time within any 500ms window to
+generate a wakeup event.
+
+To register a trigger user has to open psi interface file under
+/proc/pressure/ representing the resource to be monitored and write the
+desired threshold and time window. The open file descriptor should be
+used to wait for trigger events using select(), poll() or epoll().
+The following format is used:
+
+<some|full> <stall amount in us> <time window in us>
+
+For example writing "some 150000 1000000" into /proc/pressure/memory
+would add 150ms threshold for partial memory stall measured within
+1sec time window. Writing "full 50000 1000000" into /proc/pressure/io
+would add 50ms threshold for full io stall measured within 1sec time window.
+
+Triggers can be set on more than one psi metric and more than one trigger
+for the same psi metric can be specified. However for each trigger a separate
+file descriptor is required to be able to poll it separately from others,
+therefore for each trigger a separate open() syscall should be made even
+when opening the same psi interface file.
+
+Monitors activate only when system enters stall state for the monitored
+psi metric and deactivates upon exit from the stall state. While system is
+in the stall state psi signal growth is monitored at a rate of 10 times per
+tracking window.
+
+The kernel accepts window sizes ranging from 500ms to 10s, therefore min
+monitoring update interval is 50ms and max is 1s. Min limit is set to
+prevent overly frequent polling. Max limit is chosen as a high enough number
+after which monitors are most likely not needed and psi averages can be used
+instead.
+
+When activated, psi monitor stays active for at least the duration of one
+tracking window to avoid repeated activations/deactivations when system is
+bouncing in and out of the stall state.
+
+Notifications to the userspace are rate-limited to one per tracking window.
+
+The trigger will de-register when the file descriptor used to define the
+trigger  is closed.
+
+Userspace monitor usage example
+===============================
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <poll.h>
+#include <string.h>
+#include <unistd.h>
+
+/*
+ * Monitor memory partial stall with 1s tracking window size
+ * and 150ms threshold.
+ */
+int main() {
+	const char trig[] = "some 150000 1000000";
+	struct pollfd fds;
+	int n;
+
+	fds.fd = open("/proc/pressure/memory", O_RDWR | O_NONBLOCK);
+	if (fds.fd < 0) {
+		printf("/proc/pressure/memory open error: %s\n",
+			strerror(errno));
+		return 1;
+	}
+	fds.events = POLLPRI;
+
+	if (write(fds.fd, trig, strlen(trig) + 1) < 0) {
+		printf("/proc/pressure/memory write error: %s\n",
+			strerror(errno));
+		return 1;
+	}
+
+	printf("waiting for events...\n");
+	while (1) {
+		n = poll(&fds, 1, -1);
+		if (n < 0) {
+			printf("poll error: %s\n", strerror(errno));
+			return 1;
+		}
+		if (fds.revents & POLLERR) {
+			printf("got POLLERR, event source is gone\n");
+			return 0;
+		}
+		if (fds.revents & POLLPRI) {
+			printf("event triggered!\n");
+		} else {
+			printf("unknown event received: 0x%x\n", fds.revents);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
 Cgroup2 interface
 =================
 
@@ -71,3 +175,6 @@ mounted, pressure stall information is also tracked for tasks grouped
 into cgroups. Each subdirectory in the cgroupfs mountpoint contains
 cpu.pressure, memory.pressure, and io.pressure files; the format is
 the same as the /proc/pressure/ files.
+
+Per-cgroup psi monitors can be specified and used the same way as
+system-wide ones.

Documentation/acpi/dsd/leds.txt

@@ -0,0 +1,99 @@
+Describing and referring to LEDs in ACPI
+
+Individual LEDs are described by hierarchical data extension [6] nodes under the
+device node, the LED driver chip. The "reg" property in the LED specific nodes
+tells the numerical ID of each individual LED output to which the LEDs are
+connected. [3] The hierarchical data nodes are named "led@X", where X is the
+number of the LED output.
+
+Referring to LEDs in Device tree is documented in [4], in "flash-leds" property
+documentation. In short, LEDs are directly referred to by using phandles.
+
+While Device tree allows referring to any node in the tree[1], in ACPI
+references are limited to device nodes only [2]. For this reason using the same
+mechanism on ACPI is not possible. A mechanism to refer to non-device ACPI nodes
+is documented in [7].
+
+ACPI allows (as does DT) using integer arguments after the reference. A
+combination of the LED driver device reference and an integer argument,
+referring to the "reg" property of the relevant LED, is used to identify
+individual LEDs. The value of the "reg" property is a contract between the
+firmware and software, it uniquely identifies the LED driver outputs.
+
+Under the LED driver device, The first hierarchical data extension package list
+entry shall contain the string "led@" followed by the number of the LED,
+followed by the referred object name. That object shall be named "LED" followed
+by the number of the LED.
+
+An ASL example of a camera sensor device and a LED driver device for two LEDs.
+Objects not relevant for LEDs or the references to them have been omitted.
+
+	Device (LED)
+	{
+		Name (_DSD, Package () {
+			ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+			Package () {
+				Package () { "led@0", LED0 },
+				Package () { "led@1", LED1 },
+			}
+		})
+		Name (LED0, Package () {
+			ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+			Package () {
+				Package () { "reg", 0 },
+				Package () { "flash-max-microamp", 1000000 },
+				Package () { "flash-timeout-us", 200000 },
+				Package () { "led-max-microamp", 100000 },
+				Package () { "label", "white:flash" },
+			}
+		})
+		Name (LED1, Package () {
+			ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+			Package () {
+				Package () { "reg", 1 },
+				Package () { "led-max-microamp", 10000 },
+				Package () { "label", "red:indicator" },
+			}
+		})
+	}
+
+	Device (SEN)
+	{
+		Name (_DSD, Package () {
+			ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+			Package () {
+				Package () {
+					"flash-leds",
+					Package () { ^LED, "led@0", ^LED, "led@1" },
+				}
+			}
+		})
+	}
+
+where
+
+	LED	LED driver device
+	LED0	First LED
+	LED1	Second LED
+	SEN	Camera sensor device (or another device the LED is
+		related to)
+
+[1] Device tree. <URL:http://www.devicetree.org>, referenced 2019-02-21.
+
+[2] Advanced Configuration and Power Interface Specification.
+    <URL:https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf>,
+    referenced 2019-02-21.
+
+[3] Documentation/devicetree/bindings/leds/common.txt
+
+[4] Documentation/devicetree/bindings/media/video-interfaces.txt
+
+[5] Device Properties UUID For _DSD.
+    <URL:http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>,
+    referenced 2019-02-21.
+
+[6] Hierarchical Data Extension UUID For _DSD.
+    <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>,
+    referenced 2019-02-21.
+
+[7] Documentation/acpi/dsd/data-node-reference.txt

Documentation/admin-guide/cgroup-v2.rst

@@ -864,6 +864,8 @@ All cgroup core files are prefixed with "cgroup."
 	  populated
 		1 if the cgroup or its descendants contains any live
 		processes; otherwise, 0.
+	  frozen
+		1 if the cgroup is frozen; otherwise, 0.
 
   cgroup.max.descendants
 	A read-write single value files.  The default is "max".
@@ -897,6 +899,31 @@ All cgroup core files are prefixed with "cgroup."
 		A dying cgroup can consume system resources not exceeding
 		limits, which were active at the moment of cgroup deletion.
 
+  cgroup.freeze
+	A read-write single value file which exists on non-root cgroups.
+	Allowed values are "0" and "1". The default is "0".
+
+	Writing "1" to the file causes freezing of the cgroup and all
+	descendant cgroups. This means that all belonging processes will
+	be stopped and will not run until the cgroup will be explicitly
+	unfrozen. Freezing of the cgroup may take some time; when this action
+	is completed, the "frozen" value in the cgroup.events control file
+	will be updated to "1" and the corresponding notification will be
+	issued.
+
+	A cgroup can be frozen either by its own settings, or by settings
+	of any ancestor cgroups. If any of ancestor cgroups is frozen, the
+	cgroup will remain frozen.
+
+	Processes in the frozen cgroup can be killed by a fatal signal.
+	They also can enter and leave a frozen cgroup: either by an explicit
+	move by a user, or if freezing of the cgroup races with fork().
+	If a process is moved to a frozen cgroup, it stops. If a process is
+	moved out of a frozen cgroup, it becomes running.
+
+	Frozen status of a cgroup doesn't affect any cgroup tree operations:
+	it's possible to delete a frozen (and empty) cgroup, as well as
+	create new sub-cgroups.
 
 Controllers
 ===========

Documentation/admin-guide/ext4.rst

@@ -91,10 +91,48 @@ Currently Available
 * large block (up to pagesize) support
 * efficient new ordered mode in JBD2 and ext4 (avoid using buffer head to force
   the ordering)
+* Case-insensitive file name lookups
 
 [1] Filesystems with a block size of 1k may see a limit imposed by the
 directory hash tree having a maximum depth of two.
 
+case-insensitive file name lookups
+======================================================
+
+The case-insensitive file name lookup feature is supported on a
+per-directory basis, allowing the user to mix case-insensitive and
+case-sensitive directories in the same filesystem.  It is enabled by
+flipping the +F inode attribute of an empty directory.  The
+case-insensitive string match operation is only defined when we know how
+text in encoded in a byte sequence.  For that reason, in order to enable
+case-insensitive directories, the filesystem must have the
+casefold feature, which stores the filesystem-wide encoding
+model used.  By default, the charset adopted is the latest version of
+Unicode (12.1.0, by the time of this writing), encoded in the UTF-8
+form.  The comparison algorithm is implemented by normalizing the
+strings to the Canonical decomposition form, as defined by Unicode,
+followed by a byte per byte comparison.
+
+The case-awareness is name-preserving on the disk, meaning that the file
+name provided by userspace is a byte-per-byte match to what is actually
+written in the disk.  The Unicode normalization format used by the
+kernel is thus an internal representation, and not exposed to the
+userspace nor to the disk, with the important exception of disk hashes,
+used on large case-insensitive directories with DX feature.  On DX
+directories, the hash must be calculated using the casefolded version of
+the filename, meaning that the normalization format used actually has an
+impact on where the directory entry is stored.
+
+When we change from viewing filenames as opaque byte sequences to seeing
+them as encoded strings we need to address what happens when a program
+tries to create a file with an invalid name.  The Unicode subsystem
+within the kernel leaves the decision of what to do in this case to the
+filesystem, which select its preferred behavior by enabling/disabling
+the strict mode.  When Ext4 encounters one of those strings and the
+filesystem did not require strict mode, it falls back to considering the
+entire string as an opaque byte sequence, which still allows the user to
+operate on that file, but the case-insensitive lookups won't work.
+
 Options
 =======
 

Documentation/admin-guide/hw-vuln/index.rst

@@ -0,0 +1,13 @@
+========================
+Hardware vulnerabilities
+========================
+
+This section describes CPU vulnerabilities and provides an overview of the
+possible mitigations along with guidance for selecting mitigations if they
+are configurable at compile, boot or run time.
+
+.. toctree::
+   :maxdepth: 1
+
+   l1tf
+   mds

Documentation/admin-guide/hw-vuln/l1tf.rst

@@ -445,6 +445,7 @@ The default is 'cond'. If 'l1tf=full,force' is given on the kernel command
 line, then 'always' is enforced and the kvm-intel.vmentry_l1d_flush
 module parameter is ignored and writes to the sysfs file are rejected.
 
+.. _mitigation_selection:
 
 Mitigation selection guide
 --------------------------

Documentation/admin-guide/hw-vuln/mds.rst

@@ -0,0 +1,308 @@
+MDS - Microarchitectural Data Sampling
+======================================
+
+Microarchitectural Data Sampling is a hardware vulnerability which allows
+unprivileged speculative access to data which is available in various CPU
+internal buffers.
+
+Affected processors
+-------------------
+
+This vulnerability affects a wide range of Intel processors. The
+vulnerability is not present on:
+
+   - Processors from AMD, Centaur and other non Intel vendors
+
+   - Older processor models, where the CPU family is < 6
+
+   - Some Atoms (Bonnell, Saltwell, Goldmont, GoldmontPlus)
+
+   - Intel processors which have the ARCH_CAP_MDS_NO bit set in the
+     IA32_ARCH_CAPABILITIES MSR.
+
+Whether a processor is affected or not can be read out from the MDS
+vulnerability file in sysfs. See :ref:`mds_sys_info`.
+
+Not all processors are affected by all variants of MDS, but the mitigation
+is identical for all of them so the kernel treats them as a single
+vulnerability.
+
+Related CVEs
+------------
+
+The following CVE entries are related to the MDS vulnerability:
+
+   ==============  =====  ===================================================
+   CVE-2018-12126  MSBDS  Microarchitectural Store Buffer Data Sampling
+   CVE-2018-12130  MFBDS  Microarchitectural Fill Buffer Data Sampling
+   CVE-2018-12127  MLPDS  Microarchitectural Load Port Data Sampling
+   CVE-2019-11091  MDSUM  Microarchitectural Data Sampling Uncacheable Memory
+   ==============  =====  ===================================================
+
+Problem
+-------
+
+When performing store, load, L1 refill operations, processors write data
+into temporary microarchitectural structures (buffers). The data in the
+buffer can be forwarded to load operations as an optimization.
+
+Under certain conditions, usually a fault/assist caused by a load
+operation, data unrelated to the load memory address can be speculatively
+forwarded from the buffers. Because the load operation causes a fault or
+assist and its result will be discarded, the forwarded data will not cause
+incorrect program execution or state changes. But a malicious operation
+may be able to forward this speculative data to a disclosure gadget which
+allows in turn to infer the value via a cache side channel attack.
+
+Because the buffers are potentially shared between Hyper-Threads cross
+Hyper-Thread attacks are possible.
+
+Deeper technical information is available in the MDS specific x86
+architecture section: :ref:`Documentation/x86/mds.rst <mds>`.
+
+
+Attack scenarios
+----------------
+
+Attacks against the MDS vulnerabilities can be mounted from malicious non
+priviledged user space applications running on hosts or guest. Malicious
+guest OSes can obviously mount attacks as well.
+
+Contrary to other speculation based vulnerabilities the MDS vulnerability
+does not allow the attacker to control the memory target address. As a
+consequence the attacks are purely sampling based, but as demonstrated with
+the TLBleed attack samples can be postprocessed successfully.
+
+Web-Browsers
+^^^^^^^^^^^^
+
+  It's unclear whether attacks through Web-Browsers are possible at
+  all. The exploitation through Java-Script is considered very unlikely,
+  but other widely used web technologies like Webassembly could possibly be
+  abused.
+
+
+.. _mds_sys_info:
+
+MDS system information
+-----------------------
+
+The Linux kernel provides a sysfs interface to enumerate the current MDS
+status of the system: whether the system is vulnerable, and which
+mitigations are active. The relevant sysfs file is:
+
+/sys/devices/system/cpu/vulnerabilities/mds
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable but microcode is not updated.
+
+         The mitigation is enabled on a best effort basis. See :ref:`vmwerv`
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+
+If the processor is vulnerable then the following information is appended
+to the above information:
+
+    ========================  ============================================
+    'SMT vulnerable'          SMT is enabled
+    'SMT mitigated'           SMT is enabled and mitigated
+    'SMT disabled'            SMT is disabled
+    'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+    ========================  ============================================
+
+.. _vmwerv:
+
+Best effort mitigation mode
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  If the processor is vulnerable, but the availability of the microcode based
+  mitigation mechanism is not advertised via CPUID the kernel selects a best
+  effort mitigation mode.  This mode invokes the mitigation instructions
+  without a guarantee that they clear the CPU buffers.
+
+  This is done to address virtualization scenarios where the host has the
+  microcode update applied, but the hypervisor is not yet updated to expose
+  the CPUID to the guest. If the host has updated microcode the protection
+  takes effect otherwise a few cpu cycles are wasted pointlessly.
+
+  The state in the mds sysfs file reflects this situation accordingly.
+
+
+Mitigation mechanism
+-------------------------
+
+The kernel detects the affected CPUs and the presence of the microcode
+which is required.
+
+If a CPU is affected and the microcode is available, then the kernel
+enables the mitigation by default. The mitigation can be controlled at boot
+time via a kernel command line option. See
+:ref:`mds_mitigation_control_command_line`.
+
+.. _cpu_buffer_clear:
+
+CPU buffer clearing
+^^^^^^^^^^^^^^^^^^^
+
+  The mitigation for MDS clears the affected CPU buffers on return to user
+  space and when entering a guest.
+
+  If SMT is enabled it also clears the buffers on idle entry when the CPU
+  is only affected by MSBDS and not any other MDS variant, because the
+  other variants cannot be protected against cross Hyper-Thread attacks.
+
+  For CPUs which are only affected by MSBDS the user space, guest and idle
+  transition mitigations are sufficient and SMT is not affected.
+
+.. _virt_mechanism:
+
+Virtualization mitigation
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The protection for host to guest transition depends on the L1TF
+  vulnerability of the CPU:
+
+  - CPU is affected by L1TF:
+
+    If the L1D flush mitigation is enabled and up to date microcode is
+    available, the L1D flush mitigation is automatically protecting the
+    guest transition.
+
+    If the L1D flush mitigation is disabled then the MDS mitigation is
+    invoked explicit when the host MDS mitigation is enabled.
+
+    For details on L1TF and virtualization see:
+    :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst <mitigation_control_kvm>`.
+
+  - CPU is not affected by L1TF:
+
+    CPU buffers are flushed before entering the guest when the host MDS
+    mitigation is enabled.
+
+  The resulting MDS protection matrix for the host to guest transition:
+
+  ============ ===== ============= ============ =================
+   L1TF         MDS   VMX-L1FLUSH   Host MDS     MDS-State
+
+   Don't care   No    Don't care    N/A          Not affected
+
+   Yes          Yes   Disabled      Off          Vulnerable
+
+   Yes          Yes   Disabled      Full         Mitigated
+
+   Yes          Yes   Enabled       Don't care   Mitigated
+
+   No           Yes   N/A           Off          Vulnerable
+
+   No           Yes   N/A           Full         Mitigated
+  ============ ===== ============= ============ =================
+
+  This only covers the host to guest transition, i.e. prevents leakage from
+  host to guest, but does not protect the guest internally. Guests need to
+  have their own protections.
+
+.. _xeon_phi:
+
+XEON PHI specific considerations
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  The XEON PHI processor family is affected by MSBDS which can be exploited
+  cross Hyper-Threads when entering idle states. Some XEON PHI variants allow
+  to use MWAIT in user space (Ring 3) which opens an potential attack vector
+  for malicious user space. The exposure can be disabled on the kernel
+  command line with the 'ring3mwait=disable' command line option.
+
+  XEON PHI is not affected by the other MDS variants and MSBDS is mitigated
+  before the CPU enters a idle state. As XEON PHI is not affected by L1TF
+  either disabling SMT is not required for full protection.
+
+.. _mds_smt_control:
+
+SMT control
+^^^^^^^^^^^
+
+  All MDS variants except MSBDS can be attacked cross Hyper-Threads. That
+  means on CPUs which are affected by MFBDS or MLPDS it is necessary to
+  disable SMT for full protection. These are most of the affected CPUs; the
+  exception is XEON PHI, see :ref:`xeon_phi`.
+
+  Disabling SMT can have a significant performance impact, but the impact
+  depends on the type of workloads.
+
+  See the relevant chapter in the L1TF mitigation documentation for details:
+  :ref:`Documentation/admin-guide/hw-vuln/l1tf.rst <smt_control>`.
+
+
+.. _mds_mitigation_control_command_line:
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+The kernel command line allows to control the MDS mitigations at boot
+time with the option "mds=". The valid arguments for this option are:
+
+  ============  =============================================================
+  full		If the CPU is vulnerable, enable all available mitigations
+		for the MDS vulnerability, CPU buffer clearing on exit to
+		userspace and when entering a VM. Idle transitions are
+		protected as well if SMT is enabled.
+
+		It does not automatically disable SMT.
+
+  full,nosmt	The same as mds=full, with SMT disabled on vulnerable
+		CPUs.  This is the complete mitigation.
+
+  off		Disables MDS mitigations completely.
+
+  ============  =============================================================
+
+Not specifying this option is equivalent to "mds=full".
+
+
+Mitigation selection guide
+--------------------------
+
+1. Trusted userspace
+^^^^^^^^^^^^^^^^^^^^
+
+   If all userspace applications are from a trusted source and do not
+   execute untrusted code which is supplied externally, then the mitigation
+   can be disabled.
+
+
+2. Virtualization with trusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The same considerations as above versus trusted user space apply.
+
+3. Virtualization with untrusted guests
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   The protection depends on the state of the L1TF mitigations.
+   See :ref:`virt_mechanism`.
+
+   If the MDS mitigation is enabled and SMT is disabled, guest to host and
+   guest to guest attacks are prevented.
+
+.. _mds_default_mitigations:
+
+Default mitigations
+-------------------
+
+  The kernel default mitigations for vulnerable processors are:
+
+  - Enable CPU buffer clearing
+
+  The kernel does not by default enforce the disabling of SMT, which leaves
+  SMT systems vulnerable when running untrusted code. The same rationale as
+  for L1TF applies.
+  See :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst <default_mitigations>`.

Documentation/admin-guide/index.rst

@@ -17,14 +17,12 @@ etc.
    kernel-parameters
    devices
 
-This section describes CPU vulnerabilities and provides an overview of the
+This section describes CPU vulnerabilities and their mitigations.
-possible mitigations along with guidance for selecting mitigations if they
-are configurable at compile, boot or run time.
 
 .. toctree::
    :maxdepth: 1
 
-   l1tf
+   hw-vuln/index
 
 Here is a set of documents aimed at users who are trying to track down
 problems and bugs in particular.

Documentation/admin-guide/kernel-parameters.txt

@@ -1588,7 +1588,7 @@
 			Format: { "off" | "enforce" | "fix" | "log" }
 			default: "enforce"
 
-	ima_appraise_tcb [IMA]
+	ima_appraise_tcb [IMA] Deprecated.  Use ima_policy= instead.
 			The builtin appraise policy appraises all files
 			owned by uid=0.
 
@@ -1615,8 +1615,7 @@
 			uid=0.
 
 			The "appraise_tcb" policy appraises the integrity of
-			all files owned by root. (This is the equivalent
+			all files owned by root.
-			of ima_appraise_tcb.)
 
 			The "secure_boot" policy appraises the integrity
 			of files (eg. kexec kernel image, kernel modules,
@@ -1831,6 +1830,9 @@
 	ip=		[IP_PNP]
 			See Documentation/filesystems/nfs/nfsroot.txt.
 
+	ipcmni_extend	[KNL] Extend the maximum number of unique System V
+			IPC identifiers from 32,768 to 16,777,216.
+
 	irqaffinity=	[SMP] Set the default irq affinity mask
 			The argument is a cpu list, as described above.
 
@@ -2144,7 +2146,7 @@
 
 			Default is 'flush'.
 
-			For details see: Documentation/admin-guide/l1tf.rst
+			For details see: Documentation/admin-guide/hw-vuln/l1tf.rst
 
 	l2cr=		[PPC]
 
@@ -2390,6 +2392,32 @@
 			Format: <first>,<last>
 			Specifies range of consoles to be captured by the MDA.
 
+	mds=		[X86,INTEL]
+			Control mitigation for the Micro-architectural Data
+			Sampling (MDS) vulnerability.
+
+			Certain CPUs are vulnerable to an exploit against CPU
+			internal buffers which can forward information to a
+			disclosure gadget under certain conditions.
+
+			In vulnerable processors, the speculatively
+			forwarded data can be used in a cache side channel
+			attack, to access data to which the attacker does
+			not have direct access.
+
+			This parameter controls the MDS mitigation. The
+			options are:
+
+			full       - Enable MDS mitigation on vulnerable CPUs
+			full,nosmt - Enable MDS mitigation and disable
+				     SMT on vulnerable CPUs
+			off        - Unconditionally disable MDS mitigation
+
+			Not specifying this option is equivalent to
+			mds=full.
+
+			For details see: Documentation/admin-guide/hw-vuln/mds.rst
+
 	mem=nn[KMG]	[KNL,BOOT] Force usage of a specific amount of memory
 			Amount of memory to be used when the kernel is not able
 			to see the whole system memory or for test.
@@ -2566,6 +2594,7 @@
 					       spec_store_bypass_disable=off [X86,PPC]
 					       ssbd=force-off [ARM64]
 					       l1tf=off [X86]
+					       mds=off [X86]
 
 			auto (default)
 				Mitigate all CPU vulnerabilities, but leave SMT
@@ -2580,6 +2609,7 @@
 				if needed.  This is for users who always want to
 				be fully mitigated, even if it means losing SMT.
 				Equivalent to: l1tf=flush,nosmt [X86]
+					       mds=full,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -2876,11 +2906,11 @@
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
 
-	nosmap		[X86]
+	nosmap		[X86,PPC]
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
 
-	nosmep		[X86]
+	nosmep		[X86,PPC]
 			Disable SMEP (Supervisor Mode Execution Prevention)
 			even if it is supported by processor.
 
@@ -3147,6 +3177,16 @@
 			This will also cause panics on machine check exceptions.
 			Useful together with panic=30 to trigger a reboot.
 
+	page_alloc.shuffle=
+			[KNL] Boolean flag to control whether the page allocator
+			should randomize its free lists. The randomization may
+			be automatically enabled if the kernel detects it is
+			running on a platform with a direct-mapped memory-side
+			cache, and this parameter can be used to
+			override/disable that behavior. The state of the flag
+			can be read from sysfs at:
+			/sys/module/page_alloc/parameters/shuffle.
+
 	page_owner=	[KNL] Boot-time page_owner enabling option.
 			Storage of the information about who allocated
 			each page is disabled in default. With this switch,
@@ -4027,7 +4067,9 @@
 				[[,]s[mp]#### \
 				[[,]b[ios] | a[cpi] | k[bd] | t[riple] | e[fi] | p[ci]] \
 				[[,]f[orce]
-			Where reboot_mode is one of warm (soft) or cold (hard) or gpio,
+			Where reboot_mode is one of warm (soft) or cold (hard) or gpio
+					(prefix with 'panic_' to set mode for panic
+					reboot only),
 			      reboot_type is one of bios, acpi, kbd, triple, efi, or pci,
 			      reboot_force is either force or not specified,
 			      reboot_cpu is s[mp]#### with #### being the processor

Documentation/admin-guide/mm/numaperf.rst

@@ -0,0 +1,169 @@
+.. _numaperf:
+
+=============
+NUMA Locality
+=============
+
+Some platforms may have multiple types of memory attached to a compute
+node. These disparate memory ranges may share some characteristics, such
+as CPU cache coherence, but may have different performance. For example,
+different media types and buses affect bandwidth and latency.
+
+A system supports such heterogeneous memory by grouping each memory type
+under different domains, or "nodes", based on locality and performance
+characteristics.  Some memory may share the same node as a CPU, and others
+are provided as memory only nodes. While memory only nodes do not provide
+CPUs, they may still be local to one or more compute nodes relative to
+other nodes. The following diagram shows one such example of two compute
+nodes with local memory and a memory only node for each of compute node:
+
+ +------------------+     +------------------+
+ | Compute Node 0   +-----+ Compute Node 1   |
+ | Local Node0 Mem  |     | Local Node1 Mem  |
+ +--------+---------+     +--------+---------+
+          |                        |
+ +--------+---------+     +--------+---------+
+ | Slower Node2 Mem |     | Slower Node3 Mem |
+ +------------------+     +--------+---------+
+
+A "memory initiator" is a node containing one or more devices such as
+CPUs or separate memory I/O devices that can initiate memory requests.
+A "memory target" is a node containing one or more physical address
+ranges accessible from one or more memory initiators.
+
+When multiple memory initiators exist, they may not all have the same
+performance when accessing a given memory target. Each initiator-target
+pair may be organized into different ranked access classes to represent
+this relationship. The highest performing initiator to a given target
+is considered to be one of that target's local initiators, and given
+the highest access class, 0. Any given target may have one or more
+local initiators, and any given initiator may have multiple local
+memory targets.
+
+To aid applications matching memory targets with their initiators, the
+kernel provides symlinks to each other. The following example lists the
+relationship for the access class "0" memory initiators and targets::
+
+	# symlinks -v /sys/devices/system/node/nodeX/access0/targets/
+	relative: /sys/devices/system/node/nodeX/access0/targets/nodeY -> ../../nodeY
+
+	# symlinks -v /sys/devices/system/node/nodeY/access0/initiators/
+	relative: /sys/devices/system/node/nodeY/access0/initiators/nodeX -> ../../nodeX
+
+A memory initiator may have multiple memory targets in the same access
+class. The target memory's initiators in a given class indicate the
+nodes' access characteristics share the same performance relative to other
+linked initiator nodes. Each target within an initiator's access class,
+though, do not necessarily perform the same as each other.
+
+================
+NUMA Performance
+================
+
+Applications may wish to consider which node they want their memory to
+be allocated from based on the node's performance characteristics. If
+the system provides these attributes, the kernel exports them under the
+node sysfs hierarchy by appending the attributes directory under the
+memory node's access class 0 initiators as follows::
+
+	/sys/devices/system/node/nodeY/access0/initiators/
+
+These attributes apply only when accessed from nodes that have the
+are linked under the this access's inititiators.
+
+The performance characteristics the kernel provides for the local initiators
+are exported are as follows::
+
+	# tree -P "read*|write*" /sys/devices/system/node/nodeY/access0/initiators/
+	/sys/devices/system/node/nodeY/access0/initiators/
+	|-- read_bandwidth
+	|-- read_latency
+	|-- write_bandwidth
+	`-- write_latency
+
+The bandwidth attributes are provided in MiB/second.
+
+The latency attributes are provided in nanoseconds.
+
+The values reported here correspond to the rated latency and bandwidth
+for the platform.
+
+==========
+NUMA Cache
+==========
+
+System memory may be constructed in a hierarchy of elements with various
+performance characteristics in order to provide large address space of
+slower performing memory cached by a smaller higher performing memory. The
+system physical addresses memory  initiators are aware of are provided
+by the last memory level in the hierarchy. The system meanwhile uses
+higher performing memory to transparently cache access to progressively
+slower levels.
+
+The term "far memory" is used to denote the last level memory in the
+hierarchy. Each increasing cache level provides higher performing
+initiator access, and the term "near memory" represents the fastest
+cache provided by the system.
+
+This numbering is different than CPU caches where the cache level (ex:
+L1, L2, L3) uses the CPU-side view where each increased level is lower
+performing. In contrast, the memory cache level is centric to the last
+level memory, so the higher numbered cache level corresponds to  memory
+nearer to the CPU, and further from far memory.
+
+The memory-side caches are not directly addressable by software. When
+software accesses a system address, the system will return it from the
+near memory cache if it is present. If it is not present, the system
+accesses the next level of memory until there is either a hit in that
+cache level, or it reaches far memory.
+
+An application does not need to know about caching attributes in order
+to use the system. Software may optionally query the memory cache
+attributes in order to maximize the performance out of such a setup.
+If the system provides a way for the kernel to discover this information,
+for example with ACPI HMAT (Heterogeneous Memory Attribute Table),
+the kernel will append these attributes to the NUMA node memory target.
+
+When the kernel first registers a memory cache with a node, the kernel
+will create the following directory::
+
+	/sys/devices/system/node/nodeX/memory_side_cache/
+
+If that directory is not present, the system either does not not provide
+a memory-side cache, or that information is not accessible to the kernel.
+
+The attributes for each level of cache is provided under its cache
+level index::
+
+	/sys/devices/system/node/nodeX/memory_side_cache/indexA/
+	/sys/devices/system/node/nodeX/memory_side_cache/indexB/
+	/sys/devices/system/node/nodeX/memory_side_cache/indexC/
+
+Each cache level's directory provides its attributes. For example, the
+following shows a single cache level and the attributes available for
+software to query::
+
+	# tree sys/devices/system/node/node0/memory_side_cache/
+	/sys/devices/system/node/node0/memory_side_cache/
+	|-- index1
+	|   |-- indexing
+	|   |-- line_size
+	|   |-- size
+	|   `-- write_policy
+
+The "indexing" will be 0 if it is a direct-mapped cache, and non-zero
+for any other indexed based, multi-way associativity.
+
+The "line_size" is the number of bytes accessed from the next cache
+level on a miss.
+
+The "size" is the number of bytes provided by this cache level.
+
+The "write_policy" will be 0 for write-back, and non-zero for
+write-through caching.
+
+========
+See Also
+========
+.. [1] https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
+       Section 5.2.27

Documentation/atomic_bitops.txt

@@ -1,6 +1,6 @@
-
+=============
-On atomic bitops.
+Atomic bitops
-
+=============
 
 While our bitmap_{}() functions are non-atomic, we have a number of operations
 operating on single bits in a bitmap that are atomic.

Documentation/block/bfq-iosched.txt

@@ -20,13 +20,26 @@ for that device, by setting low_latency to 0. See Section 3 for
 details on how to configure BFQ for the desired tradeoff between
 latency and throughput, or on how to maximize throughput.
 
-BFQ has a non-null overhead, which limits the maximum IOPS that a CPU
+As every I/O scheduler, BFQ adds some overhead to per-I/O-request
-can process for a device scheduled with BFQ. To give an idea of the
+processing. To give an idea of this overhead, the total,
-limits on slow or average CPUs, here are, first, the limits of BFQ for
+single-lock-protected, per-request processing time of BFQ---i.e., the
-three different CPUs, on, respectively, an average laptop, an old
+sum of the execution times of the request insertion, dispatch and
-desktop, and a cheap embedded system, in case full hierarchical
+completion hooks---is, e.g., 1.9 us on an Intel Core i7-2760QM@2.40GHz
-support is enabled (i.e., CONFIG_BFQ_GROUP_IOSCHED is set), but
+(dated CPU for notebooks; time measured with simple code
-CONFIG_DEBUG_BLK_CGROUP is not set (Section 4-2):
+instrumentation, and using the throughput-sync.sh script of the S
+suite [1], in performance-profiling mode). To put this result into
+context, the total, single-lock-protected, per-request execution time
+of the lightest I/O scheduler available in blk-mq, mq-deadline, is 0.7
+us (mq-deadline is ~800 LOC, against ~10500 LOC for BFQ).
+
+Scheduling overhead further limits the maximum IOPS that a CPU can
+process (already limited by the execution of the rest of the I/O
+stack). To give an idea of the limits with BFQ, on slow or average
+CPUs, here are, first, the limits of BFQ for three different CPUs, on,
+respectively, an average laptop, an old desktop, and a cheap embedded
+system, in case full hierarchical support is enabled (i.e.,
+CONFIG_BFQ_GROUP_IOSCHED is set), but CONFIG_DEBUG_BLK_CGROUP is not
+set (Section 4-2):
 - Intel i7-4850HQ: 400 KIOPS
 - AMD A8-3850: 250 KIOPS
 - ARM CortexTM-A53 Octa-core: 80 KIOPS
@@ -566,3 +579,5 @@ applications. Unset this tunable if you need/want to control weights.
     Slightly extended version:
     http://algogroup.unimore.it/people/paolo/disk_sched/bfq-v1-suite-
 							results.pdf
+
+[3] https://github.com/Algodev-github/S

Documentation/block/null_blk.txt

@@ -93,3 +93,7 @@ zoned=[0/1]: Default: 0
 
 zone_size=[MB]: Default: 256
   Per zone size when exposed as a zoned block device. Must be a power of two.
+
+zone_nr_conv=[nr_conv]: Default: 0
+  The number of conventional zones to create when block device is zoned.  If
+  zone_nr_conv >= nr_zones, it will be reduced to nr_zones - 1.

Documentation/bpf/bpf_design_QA.rst

@@ -85,8 +85,33 @@ Q: Can loops be supported in a safe way?
 A: It's not clear yet.
 
 BPF developers are trying to find a way to
-support bounded loops where the verifier can guarantee that
+support bounded loops.
-the program terminates in less than 4096 instructions.
+
+Q: What are the verifier limits?
+--------------------------------
+A: The only limit known to the user space is BPF_MAXINSNS (4096).
+It's the maximum number of instructions that the unprivileged bpf
+program can have. The verifier has various internal limits.
+Like the maximum number of instructions that can be explored during
+program analysis. Currently, that limit is set to 1 million.
+Which essentially means that the largest program can consist
+of 1 million NOP instructions. There is a limit to the maximum number
+of subsequent branches, a limit to the number of nested bpf-to-bpf
+calls, a limit to the number of the verifier states per instruction,
+a limit to the number of maps used by the program.
+All these limits can be hit with a sufficiently complex program.
+There are also non-numerical limits that can cause the program
+to be rejected. The verifier used to recognize only pointer + constant
+expressions. Now it can recognize pointer + bounded_register.
+bpf_lookup_map_elem(key) had a requirement that 'key' must be
+a pointer to the stack. Now, 'key' can be a pointer to map value.
+The verifier is steadily getting 'smarter'. The limits are
+being removed. The only way to know that the program is going to
+be accepted by the verifier is to try to load it.
+The bpf development process guarantees that the future kernel
+versions will accept all bpf programs that were accepted by
+the earlier versions.
+
 
 Instruction level questions
 ---------------------------

Documentation/bpf/btf.rst

@@ -82,6 +82,8 @@ sequentially and type id is assigned to each recognized type starting from id
     #define BTF_KIND_RESTRICT       11      /* Restrict     */
     #define BTF_KIND_FUNC           12      /* Function     */
     #define BTF_KIND_FUNC_PROTO     13      /* Function Proto       */
+    #define BTF_KIND_VAR            14      /* Variable     */
+    #define BTF_KIND_DATASEC        15      /* Section      */
 
 Note that the type section encodes debug info, not just pure types.
 ``BTF_KIND_FUNC`` is not a type, and it represents a defined subprogram.
@@ -393,6 +395,61 @@ refers to parameter type.
 If the function has variable arguments, the last parameter is encoded with
 ``name_off = 0`` and ``type = 0``.
 
+2.2.14 BTF_KIND_VAR
+~~~~~~~~~~~~~~~~~~~
+
+``struct btf_type`` encoding requirement:
+  * ``name_off``: offset to a valid C identifier
+  * ``info.kind_flag``: 0
+  * ``info.kind``: BTF_KIND_VAR
+  * ``info.vlen``: 0
+  * ``type``: the type of the variable
+
+``btf_type`` is followed by a single ``struct btf_variable`` with the
+following data::
+
+    struct btf_var {
+        __u32   linkage;
+    };
+
+``struct btf_var`` encoding:
+  * ``linkage``: currently only static variable 0, or globally allocated
+                 variable in ELF sections 1
+
+Not all type of global variables are supported by LLVM at this point.
+The following is currently available:
+
+  * static variables with or without section attributes
+  * global variables with section attributes
+
+The latter is for future extraction of map key/value type id's from a
+map definition.
+
+2.2.15 BTF_KIND_DATASEC
+~~~~~~~~~~~~~~~~~~~~~~~
+
+``struct btf_type`` encoding requirement:
+  * ``name_off``: offset to a valid name associated with a variable or
+                  one of .data/.bss/.rodata
+  * ``info.kind_flag``: 0
+  * ``info.kind``: BTF_KIND_DATASEC
+  * ``info.vlen``: # of variables
+  * ``size``: total section size in bytes (0 at compilation time, patched
+              to actual size by BPF loaders such as libbpf)
+
+``btf_type`` is followed by ``info.vlen`` number of ``struct btf_var_secinfo``.::
+
+    struct btf_var_secinfo {
+        __u32   type;
+        __u32   offset;
+        __u32   size;
+    };
+
+``struct btf_var_secinfo`` encoding:
+  * ``type``: the type of the BTF_KIND_VAR variable
+  * ``offset``: the in-section offset of the variable
+  * ``size``: the size of the variable in bytes
+
 3. BTF Kernel API
 *****************
 
@@ -521,6 +578,7 @@ For line_info, the line number and column number are defined as below:
     #define BPF_LINE_INFO_LINE_COL(line_col)        ((line_col) & 0x3ff)
 
 3.4 BPF_{PROG,MAP}_GET_NEXT_ID
+==============================
 
 In kernel, every loaded program, map or btf has a unique id. The id won't
 change during the lifetime of a program, map, or btf.
@@ -530,6 +588,7 @@ each command, to user space, for bpf program or maps, respectively, so an
 inspection tool can inspect all programs and maps.
 
 3.5 BPF_{PROG,MAP}_GET_FD_BY_ID
+===============================
 
 An introspection tool cannot use id to get details about program or maps.
 A file descriptor needs to be obtained first for reference-counting purpose.

Documentation/bpf/index.rst

@@ -36,6 +36,16 @@ Two sets of Questions and Answers (Q&A) are maintained.
    bpf_devel_QA
 
 
+Program types
+=============
+
+.. toctree::
+   :maxdepth: 1
+
+   prog_cgroup_sysctl
+   prog_flow_dissector
+
+
 .. Links:
 .. _Documentation/networking/filter.txt: ../networking/filter.txt
 .. _man-pages: https://www.kernel.org/doc/man-pages/

Documentation/bpf/prog_cgroup_sysctl.rst

@@ -0,0 +1,125 @@
+.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+
+===========================
+BPF_PROG_TYPE_CGROUP_SYSCTL
+===========================
+
+This document describes ``BPF_PROG_TYPE_CGROUP_SYSCTL`` program type that
+provides cgroup-bpf hook for sysctl.
+
+The hook has to be attached to a cgroup and will be called every time a
+process inside that cgroup tries to read from or write to sysctl knob in proc.
+
+1. Attach type
+**************
+
+``BPF_CGROUP_SYSCTL`` attach type has to be used to attach
+``BPF_PROG_TYPE_CGROUP_SYSCTL`` program to a cgroup.
+
+2. Context
+**********
+
+``BPF_PROG_TYPE_CGROUP_SYSCTL`` provides access to the following context from
+BPF program::
+
+    struct bpf_sysctl {
+        __u32 write;
+        __u32 file_pos;
+    };
+
+* ``write`` indicates whether sysctl value is being read (``0``) or written
+  (``1``). This field is read-only.
+
+* ``file_pos`` indicates file position sysctl is being accessed at, read
+  or written. This field is read-write. Writing to the field sets the starting
+  position in sysctl proc file ``read(2)`` will be reading from or ``write(2)``
+  will be writing to. Writing zero to the field can be used e.g. to override
+  whole sysctl value by ``bpf_sysctl_set_new_value()`` on ``write(2)`` even
+  when it's called by user space on ``file_pos > 0``. Writing non-zero
+  value to the field can be used to access part of sysctl value starting from
+  specified ``file_pos``. Not all sysctl support access with ``file_pos !=
+  0``, e.g. writes to numeric sysctl entries must always be at file position
+  ``0``. See also ``kernel.sysctl_writes_strict`` sysctl.
+
+See `linux/bpf.h`_ for more details on how context field can be accessed.
+
+3. Return code
+**************
+
+``BPF_PROG_TYPE_CGROUP_SYSCTL`` program must return one of the following
+return codes:
+
+* ``0`` means "reject access to sysctl";
+* ``1`` means "proceed with access".
+
+If program returns ``0`` user space will get ``-1`` from ``read(2)`` or
+``write(2)`` and ``errno`` will be set to ``EPERM``.
+
+4. Helpers
+**********
+
+Since sysctl knob is represented by a name and a value, sysctl specific BPF
+helpers focus on providing access to these properties:
+
+* ``bpf_sysctl_get_name()`` to get sysctl name as it is visible in
+  ``/proc/sys`` into provided by BPF program buffer;
+
+* ``bpf_sysctl_get_current_value()`` to get string value currently held by
+  sysctl into provided by BPF program buffer. This helper is available on both
+  ``read(2)`` from and ``write(2)`` to sysctl;
+
+* ``bpf_sysctl_get_new_value()`` to get new string value currently being
+  written to sysctl before actual write happens. This helper can be used only
+  on ``ctx->write == 1``;
+
+* ``bpf_sysctl_set_new_value()`` to override new string value currently being
+  written to sysctl before actual write happens. Sysctl value will be
+  overridden starting from the current ``ctx->file_pos``. If the whole value
+  has to be overridden BPF program can set ``file_pos`` to zero before calling
+  to the helper. This helper can be used only on ``ctx->write == 1``. New
+  string value set by the helper is treated and verified by kernel same way as
+  an equivalent string passed by user space.
+
+BPF program sees sysctl value same way as user space does in proc filesystem,
+i.e. as a string. Since many sysctl values represent an integer or a vector
+of integers, the following helpers can be used to get numeric value from the
+string:
+
+* ``bpf_strtol()`` to convert initial part of the string to long integer
+  similar to user space `strtol(3)`_;
+* ``bpf_strtoul()`` to convert initial part of the string to unsigned long
+  integer similar to user space `strtoul(3)`_;
+
+See `linux/bpf.h`_ for more details on helpers described here.
+
+5. Examples
+***********
+
+See `test_sysctl_prog.c`_ for an example of BPF program in C that access
+sysctl name and value, parses string value to get vector of integers and uses
+the result to make decision whether to allow or deny access to sysctl.
+
+6. Notes
+********
+
+``BPF_PROG_TYPE_CGROUP_SYSCTL`` is intended to be used in **trusted** root
+environment, for example to monitor sysctl usage or catch unreasonable values
+an application, running as root in a separate cgroup, is trying to set.
+
+Since `task_dfl_cgroup(current)` is called at `sys_read` / `sys_write` time it
+may return results different from that at `sys_open` time, i.e. process that
+opened sysctl file in proc filesystem may differ from process that is trying
+to read from / write to it and two such processes may run in different
+cgroups, what means ``BPF_PROG_TYPE_CGROUP_SYSCTL`` should not be used as a
+security mechanism to limit sysctl usage.
+
+As with any cgroup-bpf program additional care should be taken if an
+application running as root in a cgroup should not be allowed to
+detach/replace BPF program attached by administrator.
+
+.. Links
+.. _linux/bpf.h: ../../include/uapi/linux/bpf.h
+.. _strtol(3): http://man7.org/linux/man-pages/man3/strtol.3p.html
+.. _strtoul(3): http://man7.org/linux/man-pages/man3/strtoul.3p.html
+.. _test_sysctl_prog.c:
+   ../../tools/testing/selftests/bpf/progs/test_sysctl_prog.c

Documentation/bpf/prog_flow_dissector.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-==================
+============================
-BPF Flow Dissector
+BPF_PROG_TYPE_FLOW_DISSECTOR
-==================
+============================
 
 Overview
 ========

Documentation/clearing-warn-once.txt

@@ -1,5 +1,7 @@
+Clearing WARN_ONCE
+------------------
 
-WARN_ONCE / WARN_ON_ONCE only print a warning once.
+WARN_ONCE / WARN_ON_ONCE / printk_once only emit a message once.
 
 echo 1 > /sys/kernel/debug/clear_warn_once
 

Documentation/core-api/index.rst

@@ -22,7 +22,6 @@ Core utilities
    workqueue
    genericirq
    xarray
-   flexible-arrays
    librs
    genalloc
    errseq

Documentation/core-api/kernel-api.rst

@@ -147,10 +147,10 @@ Division Functions
 .. kernel-doc:: include/linux/math64.h
    :internal:
 
-.. kernel-doc:: lib/div64.c
+.. kernel-doc:: lib/math/div64.c
    :functions: div_s64_rem div64_u64_rem div64_u64 div64_s64
 
-.. kernel-doc:: lib/gcd.c
+.. kernel-doc:: lib/math/gcd.c
    :export:
 
 UUID/GUID

Documentation/core-api/printk-formats.rst

@@ -58,6 +58,14 @@ A raw pointer value may be printed with %p which will hash the address
 before printing. The kernel also supports extended specifiers for printing
 pointers of different types.
 
+Some of the extended specifiers print the data on the given address instead
+of printing the address itself. In this case, the following error messages
+might be printed instead of the unreachable information::
+
+	(null)	 data on plain NULL address
+	(efault) data on invalid address
+	(einval) invalid data on a valid address
+
 Plain Pointers
 --------------
 

Documentation/crypto/api-samples.rst

@@ -133,7 +133,6 @@ Code Example For Use of Operational State Memory With SHASH
         if (!sdesc)
             return ERR_PTR(-ENOMEM);
         sdesc->shash.tfm = alg;
-        sdesc->shash.flags = 0x0;
         return sdesc;
     }
 

Documentation/dev-tools/gcov.rst

@@ -34,10 +34,6 @@ Configure the kernel with::
         CONFIG_DEBUG_FS=y
         CONFIG_GCOV_KERNEL=y
 
-select the gcc's gcov format, default is autodetect based on gcc version::
-
-        CONFIG_GCOV_FORMAT_AUTODETECT=y
-
 and to get coverage data for the entire kernel::
 
         CONFIG_GCOV_PROFILE_ALL=y
@@ -169,6 +165,20 @@ b) gcov is run on the BUILD machine
       [user@build] gcov -o /tmp/coverage/tmp/out/init main.c
 
 
+Note on compilers
+-----------------
+
+GCC and LLVM gcov tools are not necessarily compatible. Use gcov_ to work with
+GCC-generated .gcno and .gcda files, and use llvm-cov_ for Clang.
+
+.. _gcov: http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
+.. _llvm-cov: https://llvm.org/docs/CommandGuide/llvm-cov.html
+
+Build differences between GCC and Clang gcov are handled by Kconfig. It
+automatically selects the appropriate gcov format depending on the detected
+toolchain.
+
+
 Troubleshooting
 ---------------
 

Documentation/dev-tools/kselftest.rst

@@ -7,6 +7,11 @@ directory. These are intended to be small tests to exercise individual code
 paths in the kernel. Tests are intended to be run after building, installing
 and booting a kernel.
 
+You can find additional information on Kselftest framework, how to
+write new tests using the framework on Kselftest wiki:
+
+https://kselftest.wiki.kernel.org/
+
 On some systems, hot-plug tests could hang forever waiting for cpu and
 memory to be ready to be offlined. A special hot-plug target is created
 to run the full range of hot-plug tests. In default mode, hot-plug tests run
@@ -14,6 +19,10 @@ in safe mode with a limited scope. In limited mode, cpu-hotplug test is
 run on a single cpu as opposed to all hotplug capable cpus, and memory
 hotplug test is run on 2% of hotplug capable memory instead of 10%.
 
+kselftest runs as a userspace process.  Tests that can be written/run in
+userspace may wish to use the `Test Harness`_.  Tests that need to be
+run in kernel space may wish to use a `Test Module`_.
+
 Running the selftests (hotplug tests are run in limited mode)
 =============================================================
 
@@ -31,17 +40,32 @@ To build and run the tests with a single command, use::
 
 Note that some tests will require root privileges.
 
-Build and run from user specific object directory (make O=dir)::
+Kselftest supports saving output files in a separate directory and then
+running tests. To locate output files in a separate directory two syntaxes
+are supported. In both cases the working directory must be the root of the
+kernel src. This is applicable to "Running a subset of selftests" section
+below.
+
+To build, save output files in a separate directory with O= ::
 
   $ make O=/tmp/kselftest kselftest
 
-Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=)::
+To build, save output files in a separate directory with KBUILD_OUTPUT ::
 
-  $ make KBUILD_OUTPUT=/tmp/kselftest kselftest
+  $ export KBUILD_OUTPUT=/tmp/kselftest; make kselftest
 
-The above commands run the tests and print pass/fail summary to make it
+The O= assignment takes precedence over the KBUILD_OUTPUT environment
-easier to understand the test results. Please find the detailed individual
+variable.
-test results for each test in /tmp/testname file(s).
+
+The above commands by default run the tests and print full pass/fail report.
+Kselftest supports "summary" option to make it easier to understand the test
+results. Please find the detailed individual test results for each test in
+/tmp/testname file(s) when summary option is specified. This is applicable
+to "Running a subset of selftests" section below.
+
+To run kselftest with summary option enabled ::
+
+  $ make summary=1 kselftest
 
 Running a subset of selftests
 =============================
@@ -57,17 +81,13 @@ You can specify multiple tests to build and run::
 
   $  make TARGETS="size timers" kselftest
 
-Build and run from user specific object directory (make O=dir)::
+To build, save output files in a separate directory with O= ::
 
   $ make O=/tmp/kselftest TARGETS="size timers" kselftest
 
-Build and run KBUILD_OUTPUT directory (make KBUILD_OUTPUT=)::
+To build, save output files in a separate directory with KBUILD_OUTPUT ::
 
-  $ make KBUILD_OUTPUT=/tmp/kselftest TARGETS="size timers" kselftest
+  $ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest
-
-The above commands run the tests and print pass/fail summary to make it
-easier to understand the test results. Please find the detailed individual
-test results for each test in /tmp/testname file(s).
 
 See the top-level tools/testing/selftests/Makefile for the list of all
 possible targets.
@@ -161,11 +181,97 @@ Contributing new tests (details)
 
    e.g: tools/testing/selftests/android/config
 
+Test Module
+===========
+
+Kselftest tests the kernel from userspace.  Sometimes things need
+testing from within the kernel, one method of doing this is to create a
+test module.  We can tie the module into the kselftest framework by
+using a shell script test runner.  ``kselftest_module.sh`` is designed
+to facilitate this process.  There is also a header file provided to
+assist writing kernel modules that are for use with kselftest:
+
+- ``tools/testing/kselftest/kselftest_module.h``
+- ``tools/testing/kselftest/kselftest_module.sh``
+
+How to use
+----------
+
+Here we show the typical steps to create a test module and tie it into
+kselftest.  We use kselftests for lib/ as an example.
+
+1. Create the test module
+
+2. Create the test script that will run (load/unload) the module
+   e.g. ``tools/testing/selftests/lib/printf.sh``
+
+3. Add line to config file e.g. ``tools/testing/selftests/lib/config``
+
+4. Add test script to makefile  e.g. ``tools/testing/selftests/lib/Makefile``
+
+5. Verify it works:
+
+.. code-block:: sh
+
+   # Assumes you have booted a fresh build of this kernel tree
+   cd /path/to/linux/tree
+   make kselftest-merge
+   make modules
+   sudo make modules_install
+   make TARGETS=lib kselftest
+
+Example Module
+--------------
+
+A bare bones test module might look like this:
+
+.. code-block:: c
+
+   // SPDX-License-Identifier: GPL-2.0+
+
+   #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+   #include "../tools/testing/selftests/kselftest_module.h"
+
+   KSTM_MODULE_GLOBALS();
+
+   /*
+    * Kernel module for testing the foobinator
+    */
+
+   static int __init test_function()
+   {
+           ...
+   }
+
+   static void __init selftest(void)
+   {
+           KSTM_CHECK_ZERO(do_test_case("", 0));
+   }
+
+   KSTM_MODULE_LOADERS(test_foo);
+   MODULE_AUTHOR("John Developer <jd@fooman.org>");
+   MODULE_LICENSE("GPL");
+
+Example test script
+-------------------
+
+.. code-block:: sh
+
+    #!/bin/bash
+    # SPDX-License-Identifier: GPL-2.0+
+    $(dirname $0)/../kselftest_module.sh "foo" test_foo
+
+
 Test Harness
 ============
 
-The kselftest_harness.h file contains useful helpers to build tests.  The tests
+The kselftest_harness.h file contains useful helpers to build tests.  The
-from tools/testing/selftests/seccomp/seccomp_bpf.c can be used as example.
+test harness is for userspace testing, for kernel space testing see `Test
+Module`_ above.
+
+The tests from tools/testing/selftests/seccomp/seccomp_bpf.c can be used as
+example.
 
 Example
 -------

Documentation/devicetree/bindings/arm/altera/socfpga-system.txt

@@ -11,3 +11,15 @@ Example:
 		reg = <0xffd08000 0x1000>;
 		cpu1-start-addr = <0xffd080c4>;
 	};
+
+ARM64 - Stratix10
+Required properties:
+- compatible : "altr,sys-mgr-s10"
+- reg : Should contain 1 register range(address and length)
+        for system manager register.
+
+Example:
+	 sysmgr@ffd12000 {
+		compatible = "altr,sys-mgr-s10";
+		reg = <0xffd12000 0x228>;
+	};

Documentation/devicetree/bindings/arm/coresight.txt

@@ -8,7 +8,8 @@ through the intermediate links connecting the source to the currently selected
 sink. Each CoreSight component device should use these properties to describe
 its hardware characteristcs.
 
-* Required properties for all components *except* non-configurable replicators:
+* Required properties for all components *except* non-configurable replicators
+  and non-configurable funnels:
 
 	* compatible: These have to be supplemented with "arm,primecell" as
 	  drivers are using the AMBA bus interface.  Possible values include:
@@ -24,8 +25,10 @@ its hardware characteristcs.
 		  discovered at boot time when the device is probed.
 			"arm,coresight-tmc", "arm,primecell";
 
-		- Trace Funnel:
+		- Trace Programmable Funnel:
-			"arm,coresight-funnel", "arm,primecell";
+			"arm,coresight-dynamic-funnel", "arm,primecell";
+			"arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
+				backward compatibility and will be removed)
 
 		- Embedded Trace Macrocell (version 3.x) and
 					Program Flow Trace Macrocell:
@@ -65,11 +68,17 @@ its hardware characteristcs.
 	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
 
 * Required properties for devices that don't show up on the AMBA bus, such as
-  non-configurable replicators:
+  non-configurable replicators and non-configurable funnels:
 
 	* compatible: Currently supported value is (note the absence of the
 	  AMBA markee):
-		- "arm,coresight-replicator"
+		- Coresight Non-configurable Replicator:
+			"arm,coresight-static-replicator";
+			"arm,coresight-replicator"; (OBSOLETE. For backward
+				compatibility and will be removed)
+
+		- Coresight Non-configurable Funnel:
+			"arm,coresight-static-funnel";
 
 	* port or ports: see "Graph bindings for Coresight" below.
 
@@ -169,7 +178,7 @@ Example:
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
 		out-ports {
 			#address-cells = <1>;
@@ -200,8 +209,45 @@ Example:
 		};
 	};
 
+	funnel {
+		/*
+		 * non-configurable funnel don't show up on the AMBA
+		 * bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-funnel";
+		clocks = <&crg_ctrl HI3660_PCLK>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				combo_funnel_out: endpoint {
+					remote-endpoint = <&top_funnel_in>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				combo_funnel_in0: endpoint {
+					remote-endpoint = <&cluster0_etf_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				combo_funnel_in1: endpoint {
+					remote-endpoint = <&cluster1_etf_out>;
+				};
+			};
+		};
+	};
+
 	funnel@20040000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0x20040000 0 0x1000>;
 
 		clocks = <&oscclk6a>;

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -67,6 +67,7 @@ properties:
 
 patternProperties:
   '^cpu@[0-9a-f]+$':
+    type: object
     properties:
       device_type:
         const: cpu

Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt

@@ -14,6 +14,8 @@ Required Properties:
 	- "mediatek,mt7629-apmixedsys"
 	- "mediatek,mt8135-apmixedsys"
 	- "mediatek,mt8173-apmixedsys"
+	- "mediatek,mt8183-apmixedsys", "syscon"
+	- "mediatek,mt8516-apmixedsys"
 - #clock-cells: Must be 1
 
 The apmixedsys controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt

@@ -9,6 +9,7 @@ Required Properties:
 	- "mediatek,mt2701-audsys", "syscon"
 	- "mediatek,mt7622-audsys", "syscon"
 	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
+	- "mediatek,mt8183-audiosys", "syscon"
 - #clock-cells: Must be 1
 
 The AUDSYS controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt

@@ -0,0 +1,22 @@
+MediaTek CAMSYS controller
+============================
+
+The MediaTek camsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt8183-camsys", "syscon"
+- #clock-cells: Must be 1
+
+The camsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+camsys: camsys@1a000000  {
+	compatible = "mediatek,mt8183-camsys", "syscon";
+	reg = <0 0x1a000000  0 0x1000>;
+	#clock-cells = <1>;
+};

Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt

@@ -11,6 +11,7 @@ Required Properties:
 	- "mediatek,mt6797-imgsys", "syscon"
 	- "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
 	- "mediatek,mt8173-imgsys", "syscon"
+	- "mediatek,mt8183-imgsys", "syscon"
 - #clock-cells: Must be 1
 
 The imgsys controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt

@@ -15,6 +15,8 @@ Required Properties:
 	- "mediatek,mt7629-infracfg", "syscon"
 	- "mediatek,mt8135-infracfg", "syscon"
 	- "mediatek,mt8173-infracfg", "syscon"
+	- "mediatek,mt8183-infracfg", "syscon"
+	- "mediatek,mt8516-infracfg", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 

Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt

@@ -0,0 +1,43 @@
+Mediatek IPU controller
+============================
+
+The Mediatek ipu controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt8183-ipu_conn", "syscon"
+	- "mediatek,mt8183-ipu_adl", "syscon"
+	- "mediatek,mt8183-ipu_core0", "syscon"
+	- "mediatek,mt8183-ipu_core1", "syscon"
+- #clock-cells: Must be 1
+
+The ipu controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+ipu_conn: syscon@19000000 {
+	compatible = "mediatek,mt8183-ipu_conn", "syscon";
+	reg = <0 0x19000000 0 0x1000>;
+	#clock-cells = <1>;
+};
+
+ipu_adl: syscon@19010000 {
+	compatible = "mediatek,mt8183-ipu_adl", "syscon";
+	reg = <0 0x19010000 0 0x1000>;
+	#clock-cells = <1>;
+};
+
+ipu_core0: syscon@19180000 {
+	compatible = "mediatek,mt8183-ipu_core0", "syscon";
+	reg = <0 0x19180000 0 0x1000>;
+	#clock-cells = <1>;
+};
+
+ipu_core1: syscon@19280000 {
+	compatible = "mediatek,mt8183-ipu_core1", "syscon";
+	reg = <0 0x19280000 0 0x1000>;
+	#clock-cells = <1>;
+};

Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt

@@ -7,6 +7,7 @@ Required Properties:
 
 - compatible: Should be one of:
 	- "mediatek,mt2712-mcucfg", "syscon"
+	- "mediatek,mt8183-mcucfg", "syscon"
 - #clock-cells: Must be 1
 
 The mcucfg controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt

@@ -7,6 +7,7 @@ Required Properties:
 
 - compatible: Should be one of:
 	- "mediatek,mt2712-mfgcfg", "syscon"
+	- "mediatek,mt8183-mfgcfg", "syscon"
 - #clock-cells: Must be 1
 
 The mfgcfg controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt

@@ -11,6 +11,7 @@ Required Properties:
 	- "mediatek,mt6797-mmsys", "syscon"
 	- "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
 	- "mediatek,mt8173-mmsys", "syscon"
+	- "mediatek,mt8183-mmsys", "syscon"
 - #clock-cells: Must be 1
 
 The mmsys controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt

@@ -14,6 +14,8 @@ Required Properties:
 	- "mediatek,mt7629-topckgen"
 	- "mediatek,mt8135-topckgen"
 	- "mediatek,mt8173-topckgen"
+	- "mediatek,mt8183-topckgen", "syscon"
+	- "mediatek,mt8516-topckgen"
 - #clock-cells: Must be 1
 
 The topckgen controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt

@@ -11,6 +11,7 @@ Required Properties:
 	- "mediatek,mt6797-vdecsys", "syscon"
 	- "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
 	- "mediatek,mt8173-vdecsys", "syscon"
+	- "mediatek,mt8183-vdecsys", "syscon"
 - #clock-cells: Must be 1
 
 The vdecsys controller uses the common clk binding from

Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt

@@ -9,6 +9,7 @@ Required Properties:
 	- "mediatek,mt2712-vencsys", "syscon"
 	- "mediatek,mt6797-vencsys", "syscon"
 	- "mediatek,mt8173-vencsys", "syscon"
+	- "mediatek,mt8183-vencsys", "syscon"
 - #clock-cells: Must be 1
 
 The vencsys controller uses the common clk binding from

Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt

@@ -5,10 +5,12 @@ Properties:
                  - " st,stm32mp157-syscfg " - for stm32mp157 based SoCs,
                  second value must be always "syscon".
    - reg : offset and length of the register set.
+   - clocks: phandle to the syscfg clock
 
  Example:
          syscfg: syscon@50020000 {
                  compatible = "st,stm32mp157-syscfg", "syscon";
                  reg = <0x50020000 0x400>;
+                 clocks = <&rcc SYSCFG>;
          };
 

Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt

@@ -0,0 +1,36 @@
+Allwinner Memory Bus (MBUS) controller
+
+The MBUS controller drives the MBUS that other devices in the SoC will
+use to perform DMA. It also has a register interface that allows to
+monitor and control the bandwidth and priorities for masters on that
+bus.
+
+Required properties:
+ - compatible: Must be one of:
+	- allwinner,sun5i-a13-mbus
+ - reg: Offset and length of the register set for the controller
+ - clocks: phandle to the clock driving the controller
+ - dma-ranges: See section 2.3.9 of the DeviceTree Specification
+ - #interconnect-cells: Must be one, with the argument being the MBUS
+   port ID
+
+Each device having to perform their DMA through the MBUS must have the
+interconnects and interconnect-names properties set to the MBUS
+controller and with "dma-mem" as the interconnect name.
+
+Example:
+
+mbus: dram-controller@1c01000 {
+	compatible = "allwinner,sun5i-a13-mbus";
+	reg = <0x01c01000 0x1000>;
+	clocks = <&ccu CLK_MBUS>;
+	dma-ranges = <0x00000000 0x40000000 0x20000000>;
+	#interconnect-cells = <1>;
+};
+
+fe0: display-frontend@1e00000 {
+	compatible = "allwinner,sun5i-a13-display-frontend";
+	...
+	interconnects = <&mbus 19>;
+	interconnect-names = "dma-mem";
+};

Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt

@@ -6,7 +6,8 @@ devices.
 
 Required Properties:
 
-- compatible	: should be "amlogic,axg-audio-clkc" for the A113X and A113D
+- compatible	: should be "amlogic,axg-audio-clkc" for the A113X and A113D,
+		  "amlogic,g12a-audio-clkc" for G12A.
 - reg		: physical base address of the clock controller and length of
 		  memory mapped region.
 - clocks	: a list of phandle + clock-specifier pairs for the clocks listed

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -8,35 +8,30 @@ Slow Clock controller:
 
 Required properties:
 - compatible : shall be one of the following:
-	"atmel,at91sam9x5-sckc" or
+	"atmel,at91sam9x5-sckc",
+	"atmel,sama5d3-sckc" or
 	"atmel,sama5d4-sckc":
 		at91 SCKC (Slow Clock Controller)
-		This node contains the slow clock definitions.
+- #clock-cells : shall be 0.
-
+- clocks : shall be the input parent clock phandle for the clock.
-	"atmel,at91sam9x5-clk-slow-osc":
-		at91 slow oscillator
-
-	"atmel,at91sam9x5-clk-slow-rc-osc":
-		at91 internal slow RC oscillator
-- reg : defines the IO memory reserved for the SCKC.
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
 
+Optional properties:
+- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
+  provided on XIN.
 
 For example:
-	sckc: sckc@fffffe50 {
+	sckc@fffffe50 {
-		compatible = "atmel,sama5d3-pmc";
+		compatible = "atmel,at91sam9x5-sckc";
-		reg = <0xfffffe50 0x4>
+		reg = <0xfffffe50 0x4>;
-		#size-cells = <0>;
+		clocks = <&slow_xtal>;
-		#address-cells = <1>;
+		#clock-cells = <0>;
-
-		/* put at91 slow clocks here */
 	};
 
 Power Management Controller (PMC):
 
 Required properties:
-- compatible : shall be "atmel,<chip>-pmc", "syscon":
+- compatible : shall be "atmel,<chip>-pmc", "syscon" or
+	"microchip,sam9x60-pmc"
 	<chip> can be: at91rm9200, at91sam9260, at91sam9261,
 	at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
 	at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,

Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt

@@ -0,0 +1,93 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform.  Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the clock portion of
+the driver.
+
+Also see these documents for generic binding information:
+  [1] Clock : ../clock/clock-bindings.txt
+
+And these for relevant defines:
+  [2] include/dt-bindings/clock/lochnagar.h
+
+This binding must be part of the Lochnagar MFD binding:
+  [3] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+  - compatible : One of the following strings:
+                 "cirrus,lochnagar1-clk"
+                 "cirrus,lochnagar2-clk"
+
+  - #clock-cells : Must be 1. The first cell indicates the clock
+    number, see [2] for available clocks and [1].
+
+Optional properties:
+
+  - clocks : Must contain an entry for each clock in clock-names.
+  - clock-names : May contain entries for each of the following
+    clocks:
+     - ln-cdc-clkout : Output clock from CODEC card.
+     - ln-dsp-clkout : Output clock from DSP card.
+     - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
+       input audio clocks from host system.
+     - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
+       external connector.
+     - ln-spdif-clkout : Optional input audio clock from SPDIF.
+     - ln-adat-mclk : Optional input audio clock from ADAT.
+     - ln-pmic-32k : On board fixed clock.
+     - ln-clk-12m : On board fixed clock.
+     - ln-clk-11m : On board fixed clock.
+     - ln-clk-24m : On board fixed clock.
+     - ln-clk-22m : On board fixed clock.
+     - ln-clk-8m : On board fixed clock.
+     - ln-usb-clk-24m : On board fixed clock.
+     - ln-usb-clk-12m : On board fixed clock.
+
+  - assigned-clocks : A list of Lochnagar clocks to be reparented, see
+    [2] for available clocks.
+  - assigned-clock-parents : Parents to be assigned to the clocks
+    listed in "assigned-clocks".
+
+Optional nodes:
+
+  - fixed-clock nodes may be registered for the following on board clocks:
+     - ln-pmic-32k : 32768 Hz
+     - ln-clk-12m : 12288000 Hz
+     - ln-clk-11m : 11298600 Hz
+     - ln-clk-24m : 24576000 Hz
+     - ln-clk-22m : 22579200 Hz
+     - ln-clk-8m : 8192000 Hz
+     - ln-usb-clk-24m : 24576000 Hz
+     - ln-usb-clk-12m : 12288000 Hz
+
+Example:
+
+lochnagar {
+	lochnagar-clk {
+		compatible = "cirrus,lochnagar2-clk";
+
+		#clock-cells = <1>;
+
+		clocks = <&clk-audio>, <&clk_pmic>;
+		clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+		assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
+				  <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
+		assigned-clock-parents = <&clk-audio>,
+					 <&clk-pmic>;
+	};
+
+	clk-pmic: clk-pmic {
+		compatible = "fixed-clock";
+		clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};

Documentation/devicetree/bindings/clock/milbeaut-clock.yaml

@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/milbeaut-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut SoCs Clock Controller Binding
+
+maintainers:
+  - Taichi Sugaya <sugaya.taichi@socionext.com>
+
+description: |
+  Milbeaut SoCs Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+  This binding uses common clock bindings
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - socionext,milbeaut-m10v-ccu
+  clocks:
+    maxItems: 1
+    description: external clock
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+examples:
+  # Clock controller node:
+  - |
+    m10v-clk-ctrl@1d021000 {
+        compatible = "socionext,milbeaut-m10v-clk-ccu";
+        reg = <0x1d021000 0x4000>;
+        #clock-cells = <1>;
+        clocks = <&clki40mhz>;
+    };
+
+  # Required an external clock for Clock controller node:
+  - |
+    clocks {
+        clki40mhz: clki40mhz {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <40000000>;
+        };
+        /* other clocks */
+    };
+
+  # The clock consumer shall specify the desired clock-output of the clock
+  # controller as below by specifying output-id in its "clk" phandle cell.
+  # 2: uart
+  # 4: 32-bit timer
+  # 7: UHS-I/II
+  - |
+    serial@1e700010 {
+        compatible = "socionext,milbeaut-usio-uart";
+        reg = <0x1e700010 0x10>;
+        interrupts = <0 141 0x4>, <0 149 0x4>;
+        interrupt-names = "rx", "tx";
+        clocks = <&clk 2>;
+    };
+
+...

Documentation/devicetree/bindings/clock/qcom,turingcc.txt

@@ -0,0 +1,19 @@
+Qualcomm Turing Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible: shall contain "qcom,qcs404-turingcc".
+- reg: shall contain base register location and length.
+- clocks: ahb clock for the TuringCC
+- #clock-cells: from common clock binding, shall contain 1.
+- #reset-cells: from common reset binding, shall contain 1.
+
+Example:
+	turingcc: clock-controller@800000 {
+		compatible = "qcom,qcs404-turingcc";
+		reg = <0x00800000 0x30000>;
+		clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};

Documentation/devicetree/bindings/clock/qoriq-clock.txt

@@ -39,6 +39,7 @@ Required properties:
 	* "fsl,b4860-clockgen"
 	* "fsl,ls1012a-clockgen"
 	* "fsl,ls1021a-clockgen"
+	* "fsl,ls1028a-clockgen"
 	* "fsl,ls1043a-clockgen"
 	* "fsl,ls1046a-clockgen"
 	* "fsl,ls1088a-clockgen"
@@ -83,8 +84,8 @@ second cell is the clock index for the specified type.
 	1	cmux		index (n in CLKCnCSR)
 	2	hwaccel		index (n in CLKCGnHWACSR)
 	3	fman		0 for fm1, 1 for fm2
-	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
+	4	platform pll	n=pll/(n+1). For example, when n=1,
-				4=pll/5, 5=pll/6, 6=pll/7, 7=pll/8
+				that means output_freq=PLL_freq/2.
 	5	coreclk		must be 0
 
 3. Example

Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt

@@ -0,0 +1,46 @@
+SiFive FU540 PRCI bindings
+
+On the FU540 family of SoCs, most system-wide clock and reset integration
+is via the PRCI IP block.
+
+Required properties:
+- compatible: Should be "sifive,<chip>-prci".  Only one value is
+	supported: "sifive,fu540-c000-prci"
+- reg: Should describe the PRCI's register target physical address region
+- clocks: Should point to the hfclk device tree node and the rtcclk
+          device tree node.  The RTC clock here is not a time-of-day clock,
+	  but is instead a high-stability clock source for system timers
+	  and cycle counters.
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock via the clock ID
+macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+These macros begin with PRCI_CLK_.
+
+The hfclk and rtcclk nodes are required, and represent physical
+crystals or resonators located on the PCB.  These nodes should be present
+underneath /, rather than /soc.
+
+Examples:
+
+/* under /, in PCB-specific DT data */
+hfclk: hfclk {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <33333333>;
+	clock-output-names = "hfclk";
+};
+rtcclk: rtcclk {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <1000000>;
+	clock-output-names = "rtcclk";
+};
+
+/* under /soc, in SoC-specific DT data */
+prci: clock-controller@10000000 {
+	compatible = "sifive,fu540-c000-prci";
+	reg = <0x0 0x10000000 0x0 0x1000>;
+	clocks = <&hfclk>, <&rtcclk>;
+	#clock-cells = <1>;
+};

Documentation/devicetree/bindings/clock/st,stm32-rcc.txt

@@ -11,6 +11,8 @@ Required properties:
   "st,stm32f42xx-rcc"
   "st,stm32f469-rcc"
   "st,stm32f746-rcc"
+  "st,stm32f769-rcc"
+
 - reg: should be register base and length as documented in the
   datasheet
 - #reset-cells: 1, see below
@@ -102,6 +104,10 @@ The secondary index is bound with the following magic numbers:
 	28	CLK_I2C3
 	29	CLK_I2C4
 	30	CLK_LPTIMER	(LPTimer1 clock)
+	31	CLK_PLL_SRC
+	32	CLK_DFSDM1
+	33	CLK_ADFSDM1
+	34	CLK_F769_DSI
 )
 
 Example:

Documentation/devicetree/bindings/connector/usb-connector.txt

@@ -47,7 +47,7 @@ Required properties for usb-c-connector with power delivery support:
 Required nodes:
 - any data bus to the connector should be modeled using the OF graph bindings
   specified in bindings/graph.txt, unless the bus is between parent node and
-  the connector. Since single connector can have multpile data buses every bus
+  the connector. Since single connector can have multiple data buses every bus
   has assigned OF graph port number as follows:
     0: High Speed (HS), present in all connectors,
     1: Super Speed (SS), present in SS capable connectors,

Documentation/devicetree/bindings/counter/ftm-quaddec.txt

@@ -0,0 +1,18 @@
+FlexTimer Quadrature decoder counter
+
+This driver exposes a simple counter for the quadrature decoder mode.
+
+Required properties:
+- compatible:		Must be "fsl,ftm-quaddec".
+- reg:			Must be set to the memory region of the flextimer.
+
+Optional property:
+- big-endian:		Access the device registers in big-endian mode.
+
+Example:
+		counter0: counter@29d0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};

Documentation/devicetree/bindings/counter/stm32-lptimer-cnt.txt

@@ -10,8 +10,9 @@ See ../mfd/stm32-lptimer.txt for details about the parent node.
 
 Required properties:
 - compatible:		Must be "st,stm32-lptimer-counter".
-- pinctrl-names: 	Set to "default".
+- pinctrl-names: 	Set to "default". An additional "sleep" state can be
-- pinctrl-0: 		List of phandles pointing to pin configuration nodes,
+			defined to set pins in sleep state.
+- pinctrl-n: 		List of phandles pointing to pin configuration nodes,
 			to set IN1/IN2 pins in mode of operation for Low-Power
 			Timer input on external pin.
 
@@ -21,7 +22,8 @@ Example:
 		...
 		counter {
 			compatible = "st,stm32-lptimer-counter";
-			pinctrl-names = "default";
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&lptim1_in_pins>;
+			pinctrl-1 = <&lptim1_sleep_in_pins>;
 		};
 	};

Documentation/devicetree/bindings/counter/stm32-timer-cnt.txt

@@ -0,0 +1,31 @@
+STMicroelectronics STM32 Timer quadrature encoder
+
+STM32 Timer provides quadrature encoder to detect
+angular position and direction of rotary elements,
+from IN1 and IN2 input signals.
+
+Must be a sub-node of an STM32 Timer device tree node.
+See ../mfd/stm32-timers.txt for details about the parent node.
+
+Required properties:
+- compatible:		Must be "st,stm32-timer-counter".
+- pinctrl-names: 	Set to "default".
+- pinctrl-0: 		List of phandles pointing to pin configuration nodes,
+			to set CH1/CH2 pins in mode of operation for STM32
+			Timer input on external pin.
+
+Example:
+	timers@40010000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "st,stm32-timers";
+		reg = <0x40010000 0x400>;
+		clocks = <&rcc 0 160>;
+		clock-names = "int";
+
+		counter {
+			compatible = "st,stm32-timer-counter";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tim1_in_pins>;
+		};
+	};

Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt

@@ -37,6 +37,7 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
 	- GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
 	followed by the common "amlogic,meson-gx-dw-hdmi"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi"
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The HDMI interrupt number
 - clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
@@ -66,6 +67,9 @@ corresponding to each HDMI output and input.
  S905X (GXL)	VENC Input	TMDS Output
  S905D (GXL)	VENC Input	TMDS Output
  S912 (GXM)	VENC Input	TMDS Output
+ S905X2 (G12A)	VENC Input	TMDS Output
+ S905Y2 (G12A)	VENC Input	TMDS Output
+ S905D2 (G12A)	VENC Input	TMDS Output
 
 Example:
 

Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt

@@ -57,18 +57,18 @@ Required properties:
 	- GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
 	- GXM (S912) : "amlogic,meson-gxm-vpu"
 	followed by the common "amlogic,meson-gx-vpu"
+	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-vpu"
 - reg: base address and size of he following memory-mapped regions :
 	- vpu
 	- hhi
-	- dmc
 - reg-names: should contain the names of the previous memory regions
 - interrupts: should contain the VENC Vsync interrupt number
+- amlogic,canvas: phandle to canvas provider node as described in the file
+	../soc/amlogic/amlogic,canvas.txt
 
 Optional properties:
 - power-domains: Optional phandle to associated power domain as described in
 	the file ../power/power_domain.txt
-- amlogic,canvas: phandle to canvas provider node as described in the file
-	../soc/amlogic/amlogic,canvas.txt
 
 Required nodes:
 
@@ -84,6 +84,9 @@ corresponding to each VPU output.
  S905X (GXL)	CVBS VDAC	HDMI-TX
  S905D (GXL)	CVBS VDAC	HDMI-TX
  S912 (GXM)	CVBS VDAC	HDMI-TX
+ S905X2 (G12A)	CVBS VDAC	HDMI-TX
+ S905Y2 (G12A)	CVBS VDAC	HDMI-TX
+ S905D2 (G12A)	CVBS VDAC	HDMI-TX
 
 Example:
 

Documentation/devicetree/bindings/display/amlogic,simple-framebuffer.txt

@@ -1,33 +0,0 @@
-Meson specific Simple Framebuffer bindings
-
-This binding documents meson specific extensions to the simple-framebuffer
-bindings. The meson simplefb u-boot code relies on the devicetree containing
-pre-populated simplefb nodes.
-
-These extensions are intended so that u-boot can select the right node based
-on which pipeline is being used. As such they are solely intended for
-firmware / bootloader use, and the OS should ignore them.
-
-Required properties:
-- compatible: "amlogic,simple-framebuffer", "simple-framebuffer"
-- amlogic,pipeline, one of:
-  "vpu-cvbs"
-  "vpu-hdmi"
-
-Example:
-
-chosen {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	simplefb_hdmi: framebuffer-hdmi {
-		compatible = "amlogic,simple-framebuffer",
-			     "simple-framebuffer";
-		amlogic,pipeline = "vpu-hdmi";
-		clocks = <&clkc CLKID_HDMI_PCLK>,
-			 <&clkc CLKID_CLK81>,
-			 <&clkc CLKID_GCLK_VENCI_INT0>;
-		power-domains = <&pwrc_vpu>;
-	};
-};

Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt

@@ -6,15 +6,32 @@ Required properties:
 
 Optional properties:
 - powerdown-gpios: power-down gpio
-- reg: I2C address. If and only if present the device node
+- reg: I2C address. If and only if present the device node should be placed
-       should be placed into the i2c controller node where the
+  into the I2C controller node where the TFP410 I2C is connected to.
-       tfp410 i2c is connected to.
+- ti,deskew: data de-skew in 350ps increments, from -4 to +3, as configured
+  through th DK[3:1] pins. This property shall be present only if the TFP410
+  is not connected through I2C.
 
 Required nodes:
-- Video port 0 for DPI input [1].
-- Video port 1 for DVI output [1].
 
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+This device has two video ports. Their connections are modeled using the OF
+graph bindings specified in [1]. Each port node shall have a single endpoint.
+
+- Port 0 is the DPI input port. Its endpoint subnode shall contain a
+  pclk-sample and bus-width property and a remote-endpoint property as specified
+  in [1].
+  - If pclk-sample is not defined, pclk-sample = 0 should be assumed for
+    backward compatibility.
+  - If bus-width is not defined then bus-width = 24 should be assumed for
+    backward compatibility.
+    bus-width = 24: 24 data lines are connected and single-edge mode
+    bus-width = 12: 12 data lines are connected and dual-edge mode
+
+- Port 1 is the DVI output port. Its endpoint subnode shall contain a
+  remote-endpoint property is specified in [1].
+
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+
 
 Example
 -------
@@ -22,6 +39,7 @@ Example
 tfp410: encoder@0 {
 	compatible = "ti,tfp410";
 	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+	ti,deskew = <4>;
 
 	ports {
 		#address-cells = <1>;
@@ -31,6 +49,8 @@ tfp410: encoder@0 {
 			reg = <0>;
 
 			tfp410_in: endpoint@0 {
+				pclk-sample = <1>;
+				bus-width = <24>;
 				remote-endpoint = <&dpi_out>;
 			};
 		};

Documentation/devicetree/bindings/display/msm/gmu.txt

@@ -24,7 +24,10 @@ Required properties:
    * "cxo"
    * "axi"
    * "mnoc"
-- power-domains: should be <&clock_gpucc GPU_CX_GDSC>
+- power-domains: should be:
+	<&clock_gpucc GPU_CX_GDSC>
+	<&clock_gpucc GPU_GX_GDSC>
+- power-domain-names: Matching names for the power domains
 - iommus: phandle to the adreno iommu
 - operating-points-v2: phandle to the OPP operating points
 
@@ -51,7 +54,10 @@ Example:
 			<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
 		clock-names = "gmu", "cxo", "axi", "memnoc";
 
-		power-domains = <&gpucc GPU_CX_GDSC>;
+		power-domains = <&gpucc GPU_CX_GDSC>,
+				<&gpucc GPU_GX_GDSC>;
+		power-domain-names = "cx", "gx";
+
 		iommus = <&adreno_smmu 5>;
 
 		operating-points-v2 = <&gmu_opp_table>;

Documentation/devicetree/bindings/display/msm/gpu.txt

@@ -22,9 +22,14 @@ Required properties:
    - qcom,adreno-630.2
 - iommus: optional phandle to an adreno iommu instance
 - operating-points-v2: optional phandle to the OPP operating points
+- interconnects: optional phandle to an interconnect provider.  See
+  ../interconnect/interconnect.txt for details.
 - qcom,gmu: For GMU attached devices a phandle to the GMU device that will
   control the power for the GPU. Applicable targets:
     - qcom,adreno-630.2
+- zap-shader: For a5xx and a6xx devices this node contains a memory-region that
+  points to reserved memory to store the zap shader that can be used to help
+  bring the GPU out of secure mode.
 
 Example 3xx/4xx/a5xx:
 
@@ -70,6 +75,12 @@ Example a6xx (with GMU):
 
 		operating-points-v2 = <&gpu_opp_table>;
 
+		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+
 		qcom,gmu = <&gmu>;
+
+		zap-shader {
+			memory-region = <&zap_shader_region>;
+		};
 	};
 };

Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt

@@ -0,0 +1,20 @@
+Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+Required properties:
+- compatible: must be "feiyang,fy07024di26a30d"
+- reg: DSI virtual channel used by that screen
+- avdd-supply: analog regulator dc1 switch
+- dvdd-supply: 3v3 digital regulator
+- reset-gpios: a GPIO phandle for the reset pin
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+panel@0 {
+	compatible = "feiyang,fy07024di26a30d";
+	reg = <0>;
+	avdd-supply = <&reg_dc1sw>;
+	dvdd-supply = <&reg_dldo2>;
+	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+	backlight = <&backlight>;
+};

Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt

@@ -12,7 +12,7 @@ Optional properties:
 Example:
 
 	&mipi_dsi {
-		panel {
+		panel@0 {
 			compatible = "innolux,p079zca";
 			reg = <0>;
 			power-supply = <...>;

Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt

@@ -13,7 +13,7 @@ Optional properties:
 Example:
 
 	&mipi_dsi {
-		panel {
+		panel@0 {
 			compatible = "innolux,p079zca";
 			reg = <0>;
 			avdd-supply = <...>;

Documentation/devicetree/bindings/display/panel/kingdisplay,kd097d04.txt

@@ -12,7 +12,7 @@ Optional properties:
 Example:
 
 	&mipi_dsi {
-		panel {
+		panel@0 {
 			compatible = "kingdisplay,kd097d04";
 			reg = <0>;
 			power-supply = <...>;

Documentation/devicetree/bindings/display/panel/lg,acx467akm-7.txt

@@ -0,0 +1,7 @@
+LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
+
+Required properties:
+- compatible: must be "lg,acx467akm-7"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/osddisplays,osd070t1718-19ts.txt

@@ -0,0 +1,12 @@
+OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
+
+Required properties:
+- compatible: shall be "osddisplays,osd070t1718-19ts"
+- power-supply: see simple-panel.txt
+
+Optional properties:
+- backlight: see simple-panel.txt
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory. No other simple-panel properties than
+the ones specified herein are valid.

Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt

@@ -0,0 +1,18 @@
+Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
+
+Required properties:
+- compatible: should be "rocktech,jh057n00900"
+- reg: DSI virtual channel of the peripheral
+- reset-gpios: panel reset gpio
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	&mipi_dsi {
+		panel@0 {
+			compatible = "rocktech,jh057n00900";
+			reg = <0>;
+			backlight = <&backlight>;
+			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		};
+	};

Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ronbo RB070D30 DSI Display Panel
+
+maintainers:
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  compatible:
+    const: ronbo,rb070d30
+
+  reg:
+    description: MIPI-DSI virtual channel
+
+  power-gpios:
+    description: GPIO used for the power pin
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO used for the reset pin
+    maxItems: 1
+
+  shlr-gpios:
+    description: GPIO used for the shlr pin (horizontal flip)
+    maxItems: 1
+
+  updn-gpios:
+    description: GPIO used for the updn pin (vertical flip)
+    maxItems: 1
+
+  vcc-lcd-supply:
+    description: Power regulator
+
+  backlight:
+    description: Backlight used by the panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+required:
+  - compatible
+  - power-gpios
+  - reg
+  - reset-gpios
+  - shlr-gpios
+  - updn-gpios
+  - vcc-lcd-supply
+
+additionalProperties: false

Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt

@@ -6,6 +6,7 @@ Required properties:
 
 Optional properties:
 - label: a symbolic name for the panel
+- backlight: phandle of the backlight device
 
 Required nodes:
 - Video port for DPI input
@@ -21,6 +22,7 @@ lcd-panel: td028ttec1@0 {
 	spi-cpha;
 
 	label = "lcd";
+	backlight = <&backlight>;
 	port {
 		lcd_in: endpoint {
 			remote-endpoint = <&dpi_out>;

Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.txt

@@ -0,0 +1,72 @@
+Rockchip specific extensions for rk3066 HDMI
+============================================
+
+Required properties:
+- compatible:
+	"rockchip,rk3066-hdmi";
+- reg:
+	Physical base address and length of the controller's registers.
+- clocks, clock-names:
+	Phandle to HDMI controller clock, name should be "hclk".
+- interrupts:
+	HDMI interrupt number.
+- power-domains:
+	Phandle to the RK3066_PD_VIO power domain.
+- rockchip,grf:
+	This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+- ports:
+	Contains one port node with two endpoints, numbered 0 and 1,
+	connected respectively to vop0 and vop1.
+	Contains one port node with one endpoint
+	connected to a hdmi-connector node.
+- pinctrl-0, pinctrl-name:
+	Switch the iomux for the HPD/I2C pins to HDMI function.
+
+Example:
+	hdmi: hdmi@10116000 {
+		compatible = "rockchip,rk3066-hdmi";
+		reg = <0x10116000 0x2000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HDMI>;
+		clock-names = "hclk";
+		power-domains = <&power RK3066_PD_VIO>;
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				hdmi_in_vop0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vop0_out_hdmi>;
+				};
+				hdmi_in_vop1: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vop1_out_hdmi>;
+				};
+			};
+			hdmi_out: port@1 {
+				reg = <1>;
+				hdmi_out_con: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+		};
+	};
+
+&pinctrl {
+		hdmi {
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+			};
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+						<0 RK_PA2 1 &pcfg_pull_none>;
+			};
+		};
+};

Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt

@@ -1,36 +0,0 @@
-Sunxi specific Simple Framebuffer bindings
-
-This binding documents sunxi specific extensions to the simple-framebuffer
-bindings. The sunxi simplefb u-boot code relies on the devicetree containing
-pre-populated simplefb nodes.
-
-These extensions are intended so that u-boot can select the right node based
-on which pipeline is being used. As such they are solely intended for
-firmware / bootloader use, and the OS should ignore them.
-
-Required properties:
-- compatible: "allwinner,simple-framebuffer"
-- allwinner,pipeline, one of:
-  "de_be0-lcd0"
-  "de_be1-lcd1"
-  "de_be0-lcd0-hdmi"
-  "de_be1-lcd1-hdmi"
-  "mixer0-lcd0"
-  "mixer0-lcd0-hdmi"
-  "mixer1-lcd1-hdmi"
-  "mixer1-lcd1-tve"
-
-Example:
-
-chosen {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	framebuffer@0 {
-		compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
-		allwinner,pipeline = "de_be0-lcd0-hdmi";
-		clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-			 <&ahb_gates 44>;
-	};
-};

Documentation/devicetree/bindings/display/simple-framebuffer.txt

@@ -1,91 +0,0 @@
-Simple Framebuffer
-
-A simple frame-buffer describes a frame-buffer setup by firmware or
-the bootloader, with the assumption that the display hardware has already
-been set up to scan out from the memory pointed to by the reg property.
-
-Since simplefb nodes represent runtime information they must be sub-nodes of
-the chosen node (*). Simplefb nodes must be named "framebuffer@<address>".
-
-If the devicetree contains nodes for the display hardware used by a simplefb,
-then the simplefb node must contain a property called "display", which
-contains a phandle pointing to the primary display hw node, so that the OS
-knows which simplefb to disable when handing over control to a driver for the
-real hardware. The bindings for the hw nodes must specify which node is
-considered the primary node.
-
-It is advised to add display# aliases to help the OS determine how to number
-things. If display# aliases are used, then if the simplefb node contains a
-"display" property then the /aliases/display# path must point to the display
-hw node the "display" property points to, otherwise it must point directly
-to the simplefb node.
-
-If a simplefb node represents the preferred console for user interaction,
-then the chosen node's stdout-path property should point to it, or to the
-primary display hw node, as with display# aliases. If display aliases are
-used then it should be set to the alias instead.
-
-It is advised that devicetree files contain pre-filled, disabled framebuffer
-nodes, so that the firmware only needs to update the mode information and
-enable them. This way if e.g. later on support for more display clocks get
-added, the simplefb nodes will already contain this info and the firmware
-does not need to be updated.
-
-If pre-filled framebuffer nodes are used, the firmware may need extra
-information to find the right node. In that case an extra platform specific
-compatible and platform specific properties should be used and documented,
-see e.g. simple-framebuffer-sunxi.txt .
-
-Required properties:
-- compatible: "simple-framebuffer"
-- reg: Should contain the location and size of the framebuffer memory.
-- width: The width of the framebuffer in pixels.
-- height: The height of the framebuffer in pixels.
-- stride: The number of bytes in each line of the framebuffer.
-- format: The format of the framebuffer surface. Valid values are:
-  - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
-  - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
-
-Optional properties:
-- clocks : List of clocks used by the framebuffer.
-- *-supply : Any number of regulators used by the framebuffer. These should
-	     be named according to the names in the device's design.
-
-  The above resources are expected to already be configured correctly.
-  The OS must ensure they are not modified or disabled while the simple
-  framebuffer remains active.
-
-- display : phandle pointing to the primary display hardware node
-
-Example:
-
-aliases {
-	display0 = &lcdc0;
-}
-
-chosen {
-	framebuffer0: framebuffer@1d385000 {
-		compatible = "simple-framebuffer";
-		reg = <0x1d385000 (1600 * 1200 * 2)>;
-		width = <1600>;
-		height = <1200>;
-		stride = <(1600 * 2)>;
-		format = "r5g6b5";
-		clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
-		lcd-supply = <&reg_dc1sw>;
-		display = <&lcdc0>;
-	};
-	stdout-path = "display0";
-};
-
-soc@1c00000 {
-	lcdc0: lcdc@1c0c000 {
-		compatible = "allwinner,sun4i-a10-lcdc";
-		...
-	};
-};
-
-
-*) Older devicetree files may have a compatible = "simple-framebuffer" node
-in a different place, operating systems must first enumerate any compatible
-nodes found under chosen and then check for other compatible nodes.

Documentation/devicetree/bindings/display/simple-framebuffer.yaml

@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/simple-framebuffer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Framebuffer Device Tree Bindings
+
+maintainers:
+  - Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+  - Hans de Goede <hdegoede@redhat.com>
+
+description: |+
+  A simple frame-buffer describes a frame-buffer setup by firmware or
+  the bootloader, with the assumption that the display hardware has
+  already been set up to scan out from the memory pointed to by the
+  reg property.
+
+  Since simplefb nodes represent runtime information they must be
+  sub-nodes of the chosen node (*). Simplefb nodes must be named
+  framebuffer@<address>.
+
+  If the devicetree contains nodes for the display hardware used by a
+  simplefb, then the simplefb node must contain a property called
+  display, which contains a phandle pointing to the primary display
+  hw node, so that the OS knows which simplefb to disable when handing
+  over control to a driver for the real hardware. The bindings for the
+  hw nodes must specify which node is considered the primary node.
+
+  It is advised to add display# aliases to help the OS determine how
+  to number things. If display# aliases are used, then if the simplefb
+  node contains a display property then the /aliases/display# path
+  must point to the display hw node the display property points to,
+  otherwise it must point directly to the simplefb node.
+
+  If a simplefb node represents the preferred console for user
+  interaction, then the chosen node stdout-path property should point
+  to it, or to the primary display hw node, as with display#
+  aliases. If display aliases are used then it should be set to the
+  alias instead.
+
+  It is advised that devicetree files contain pre-filled, disabled
+  framebuffer nodes, so that the firmware only needs to update the
+  mode information and enable them. This way if e.g. later on support
+  for more display clocks get added, the simplefb nodes will already
+  contain this info and the firmware does not need to be updated.
+
+  If pre-filled framebuffer nodes are used, the firmware may need
+  extra information to find the right node. In that case an extra
+  platform specific compatible and platform specific properties should
+  be used and documented.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - allwinner,simple-framebuffer
+          - amlogic,simple-framebuffer
+      - const: simple-framebuffer
+
+  reg:
+    description: Location and size of the framebuffer memory
+
+  clocks:
+    description: List of clocks used by the framebuffer.
+
+  power-domains:
+    description: List of power domains used by the framebuffer.
+
+  width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Width of the framebuffer in pixels
+
+  height:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Height of the framebuffer in pixels
+
+  stride:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of bytes of a line in the framebuffer
+
+  format:
+    description: >
+      Format of the framebuffer:
+        * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+        * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+    enum:
+      - a8b8g8r8
+      - r5g6b5
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Primary display hardware node
+
+  allwinner,pipeline:
+    description: Pipeline used by the framebuffer on Allwinner SoCs
+    enum:
+      - de_be0-lcd0
+      - de_be0-lcd0-hdmi
+      - de_be0-lcd0-tve0
+      - de_be1-lcd0
+      - de_be1-lcd1-hdmi
+      - de_fe0-de_be0-lcd0
+      - de_fe0-de_be0-lcd0-hdmi
+      - de_fe0-de_be0-lcd0-tve0
+      - mixer0-lcd0
+      - mixer0-lcd0-hdmi
+      - mixer1-lcd1-hdmi
+      - mixer1-lcd1-tve
+
+  amlogic,pipeline:
+    description: Pipeline used by the framebuffer on Amlogic SoCs
+    enum:
+      - vpu-cvbs
+      - vpu-hdmi
+
+patternProperties:
+  "^[a-zA-Z0-9-]+-supply$":
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Regulators used by the framebuffer. These should be named
+      according to the names in the device design.
+
+required:
+  # The binding requires also reg, width, height, stride and format,
+  # but usually they will be filled by the bootloader.
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    aliases {
+      display0 = &lcdc0;
+    };
+
+    chosen {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      stdout-path = "display0";
+      framebuffer0: framebuffer@1d385000 {
+        compatible = "simple-framebuffer";
+        reg = <0x1d385000 3840000>;
+        width = <1600>;
+        height = <1200>;
+        stride = <3200>;
+        format = "r5g6b5";
+        clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+        lcd-supply = <&reg_dc1sw>;
+        display = <&lcdc0>;
+      };
+    };
+
+    soc@1c00000 {
+      lcdc0: lcdc@1c0c000 {
+        compatible = "allwinner,sun4i-a10-lcdc";
+      };
+    };
+
+...