Merge tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "This time, this pull request contains changes crossing subsystems and archs/platforms, which is mainly because of a bigger modernization of moving from legacy GPIO to GPIO descriptors for MMC (by Linus Walleij). Additionally, once again, I am funneling changes to drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree, mostly due to that we lack a maintainer for these. Summary: MMC core: - Cleanup BKOPS support - Introduce MMC_CAP_SYNC_RUNTIME_PM - slot-gpio: Delete legacy slot GPIO handling MMC host: - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader - bcm2835: Several improvements to better recover from errors - jz4740: Rework and fixup pre|post_req support - mediatek: Add support for SDIO IRQs - meson-gx: Improve clock phase management - meson-gx: Stop descriptor on errors - mmci: Complete the sbc error path by sending a stop command - renesas_sdhi/tmio: Fixup reset/resume operations - renesas_sdhi: Add support for r8a774c0 and R7S9210 - renesas_sdhi: Whitelist R8A77990 SDHI - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W - rtsx_usb_sdmmc: Re-work card detection/removal support - rtsx_usb_sdmmc: Re-work runtime PM support - sdhci: Fix timeout loops for some variant drivers - sdhci: Improve support for error handling due to failing commands - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs - sdhci-of-esdhc: Add support for eMMC HS400 mode - sdhci-omap: Fixup reset support - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200 - sdhci-msm: Fixup dynamical clock gating issues - various: Complete converting all hosts into using slot GPIO descriptors Other: - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors - Add new Alcor Micro cardreader PCI driver - Support runtime power management for memstick rtsx_usb_ms driver - Use USB remote wakeups for card detection for rtsx_usb misc driver" * tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits) mmc: mediatek: Add MMC_CAP_SDIO_IRQ support mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0 dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support mmc: core: Cleanup BKOPS support mmc: core: Drop redundant check in mmc_send_hpi_cmd() mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929) dt-bindings: sdhci-omap: Add note for cpu_thermal mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers mmc: sdhci: Add quirk to disable LED control mmc: mmci: add variant property to set command stop bit misc: alcor_pci: fix spelling mistake "invailid" -> "invalid" mmc: meson-gx: add signal resampling mmc: meson-gx: align default phase on soc vendor tree mmc: meson-gx: remove useless lock mmc: meson-gx: make sure the descriptor is stopped on errors mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65 dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs mmc: sdhci-msm: avoid unused function warning ...
This commit is contained in:
@@ -30,15 +30,11 @@ enum cd_types {
|
||||
*
|
||||
* ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
|
||||
*
|
||||
* @wp_gpio: gpio for write_protect
|
||||
* @cd_gpio: gpio for card_detect interrupt
|
||||
* @wp_type: type of write_protect method (see wp_types enum above)
|
||||
* @cd_type: type of card_detect method (see cd_types enum above)
|
||||
*/
|
||||
|
||||
struct esdhc_platform_data {
|
||||
unsigned int wp_gpio;
|
||||
unsigned int cd_gpio;
|
||||
enum wp_types wp_type;
|
||||
enum cd_types cd_type;
|
||||
int max_bus_width;
|
||||
|
@@ -15,11 +15,7 @@ struct pxamci_platform_data {
|
||||
int (*get_ro)(struct device *);
|
||||
int (*setpower)(struct device *, unsigned int);
|
||||
void (*exit)(struct device *, void *);
|
||||
int gpio_card_detect; /* gpio detecting card insertion */
|
||||
int gpio_card_ro; /* gpio detecting read only toggle */
|
||||
bool gpio_card_ro_invert; /* gpio ro is inverted */
|
||||
int gpio_power; /* gpio powering up MMC bus */
|
||||
bool gpio_power_invert; /* gpio power is inverted */
|
||||
};
|
||||
|
||||
extern void pxa_set_mci_info(struct pxamci_platform_data *info);
|
||||
|
@@ -7,7 +7,6 @@
|
||||
* @no_wprotect: Set this to indicate there is no write-protect switch.
|
||||
* @no_detect: Set this if there is no detect switch.
|
||||
* @wprotect_invert: Invert the default sense of the write protect switch.
|
||||
* @detect_invert: Invert the default sense of the write protect switch.
|
||||
* @use_dma: Set to allow the use of DMA.
|
||||
* @gpio_detect: GPIO number for the card detect line.
|
||||
* @gpio_wprotect: GPIO number for the write protect line.
|
||||
@@ -31,11 +30,8 @@ struct s3c24xx_mci_pdata {
|
||||
unsigned int no_wprotect:1;
|
||||
unsigned int no_detect:1;
|
||||
unsigned int wprotect_invert:1;
|
||||
unsigned int detect_invert:1; /* set => detect active high */
|
||||
unsigned int use_dma:1;
|
||||
|
||||
unsigned int gpio_detect;
|
||||
unsigned int gpio_wprotect;
|
||||
unsigned long ocr_avail;
|
||||
void (*set_power)(unsigned char power_mode,
|
||||
unsigned short vdd);
|
||||
|
Reference in New Issue
Block a user