sm8450-common: overlay: Checkout Frameworks overlay to LA.VENDOR.1.0.r1-13100-WAIPIO.0

Change-Id: Ib65e04f44abb39c807410b5208320578faff1705

overlay/FrameworksResCommon_Sys/res/values/config.xml

@@ -115,29 +115,6 @@
         <item>263</item>
         <item>264</item>
         <item>265</item>
-        <item>266</item>
-        <item>267</item>
-        <item>268</item>
-        <item>269</item>
-        <item>270</item>
-        <item>271</item>
-        <item>272</item>
-        <item>273</item>
-        <item>274</item>
-        <item>275</item>
-        <item>276</item>
-        <item>277</item>
-        <item>278</item>
-        <item>279</item>
-        <item>280</item>
-        <item>281</item>
-        <item>282</item>
-        <item>283</item>
-        <item>284</item>
-        <item>285</item>
-        <item>286</item>
-        <item>287</item>
-        <item>288</item>
     </integer-array>
 
     <!-- Is the device capable of hot swapping an UICC Card -->
@@ -207,6 +184,17 @@
          autodetected from the Configuration. -->
     <bool name="config_showNavigationBar">true</bool>
 
+    <!-- ComponentName of a dream to show whenever the system would otherwise have
+         gone to sleep.  When the PowerManager is asked to go to sleep, it will instead
+         try to start this dream if possible.  The dream should typically call startDozing()
+         to put the display into a low power state and allow the application processor
+         to be suspended.  When the dream ends, the system will go to sleep as usual.
+         Specify the component name or an empty string if none.
+
+         Note that doze dreams are not subject to the same start conditions as ordinary dreams.
+         Doze dreams will run whenever the power manager is in a dozing state. -->
+    <string name="config_dozeComponent" translatable="false">com.android.systemui/com.android.systemui.doze.DozeService</string>
+
     <!-- Power Management: Specifies whether to decouple the interactive state of the
          device from the display on/off state.
 
@@ -230,16 +218,11 @@
     <bool name="config_cellBroadcastAppLinks">true</bool>
 
     <!--  Maximum number of supported users -->
-    <integer name="config_multiuserMaximumUsers">5</integer>
+    <integer name="config_multiuserMaximumUsers">4</integer>
 
     <!-- Whether UI for multi user should be shown -->
     <bool name="config_enableMultiUserUI">true</bool>
 
-    <!-- Safe headphone volume index. When music stream volume is below this index
-    the SPL on headphone output is compliant to EN 60950 requirements for portable music
-    players. -->
-    <integer name="config_safe_media_volume_index">100</integer>
-
     <!-- Configure mobile tcp buffer sizes in the form:
          rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
          If no value is found for the rat-name in use, the system default will be applied.
@@ -276,7 +259,7 @@
     <bool name="config_wifiDisplaySupportsProtectedBuffers">true</bool>
 
     <!-- Whether camera shutter sound is forced or not  (country specific). -->
-    <bool name="config_camera_sound_forced">true</bool>
+    <bool name="config_camera_sound_forced">false</bool>
 
     <!-- Flag indicating if the speed up audio on mt call code should be executed -->
     <bool name="config_speed_up_audio_on_mt_calls">true</bool>

overlay/FrameworksResTarget_Vendor/res/values/bools.xml

@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-     Copyright (C) 2024 The LineageOS Project
-     SPDX-License-Identifier: Apache-2.0
--->
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-    <bool name="config_wifi_wap3_sap_mode_enabled">true</bool>
-</resources>

overlay/FrameworksResTarget_Vendor/res/values/config.xml

@@ -4,136 +4,6 @@
      SPDX-License-Identifier: Apache-2.0
 -->
 <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-    <!-- Fast brightness animation ramp rate in brightness units per second-->
-    <integer name="config_brightness_ramp_rate_fast" translatable="false">180</integer>
-
-    <!-- Slow brightness animation ramp rate in brightness units per second-->
-    <integer name="config_brightness_ramp_rate_slow" translatable="false">60</integer>
-
-    <!-- Note: This setting is deprecated, please use
-    config_screenBrightnessSettingMinimumFloat instead -->
-    <integer name="config_screenBrightnessSettingMinimum">12</integer>
-
-    <!-- Note: This setting is deprecated, please use
-    config_screenBrightnessSettingMaximumFloat instead -->
-    <integer name="config_screenBrightnessSettingMaximum">255</integer>
-
-    <!-- Note: This setting is deprecated, please use
-    config_screenBrightnessSettingDefaultFloat instead -->
-    <integer name="config_screenBrightnessSettingDefault">67</integer>
-
-    <!-- Note: This setting is deprecated, please use
-    config_screenBrightnessSettingForVrDefaultFloat instead -->
-    <integer name="config_screenBrightnessForVrSettingDefault">86</integer>
-
-    <!-- Note: This setting is deprecated, please use
-    config_screenBrightnessSettingForVrMinimumFloat instead -->
-    <integer name="config_screenBrightnessForVrSettingMinimum">79</integer>
-
-    <!-- Note: This setting is deprecated, please use
-    config_screenBrightnessSettingForVrMaximumFloat instead -->
-    <integer name="config_screenBrightnessForVrSettingMaximum">255</integer>
-
-    <!-- The maximum range of gamma adjustment possible using the screen
-         auto-brightness adjustment setting. -->
-    <fraction name="config_autoBrightnessAdjustmentMaxGamma">300.0%</fraction>
-
-    <!-- Screen brightness used to dim the screen when the user activity
-         timeout expires.  May be less than the minimum allowed brightness setting
-         that can be set by the user. -->
-    <integer name="config_screenBrightnessDim">12</integer>
-
-    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
-         The N entries of this array define N + 1 control points as follows:
-         (1-based arrays)
-
-         Point 1:            (0, value[1]):             lux <= 0
-         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
-         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
-         ...
-         Point N+1: (level[N], value[N+1]):  level[N] < lux
-
-         The control points must be strictly increasing.  Each control point
-         corresponds to an entry in the brightness backlight values arrays.
-         For example, if lux == level[1] (first element of the levels array)
-         then the brightness will be determined by value[2] (second element
-         of the brightness values array).
-
-         Spline interpolation is used to determine the auto-brightness
-         backlight values for lux levels between these control points.
-
-         Must be overridden in platform specific overlays -->
-    <integer-array name="config_autoBrightnessLevels">
-        <item>1</item>
-        <item>2</item>
-        <item>5</item>
-        <item>9</item>
-        <item>13</item>
-        <item>17</item>
-        <item>21</item>
-        <item>26</item>
-        <item>30</item>
-        <item>40</item>
-        <item>83</item>
-        <item>104</item>
-        <item>200</item>
-        <item>400</item>
-        <item>500</item>
-        <item>600</item>
-        <item>700</item>
-        <item>800</item>
-        <item>1000</item>
-        <item>1200</item>
-        <item>1500</item>
-        <item>1800</item>
-        <item>2000</item>
-        <item>2165</item>
-        <item>2680</item>
-        <item>3000</item>
-        <item>3540</item>
-        <item>4000</item>
-    </integer-array>
-
-    <!-- Array of output values for LCD backlight corresponding to the lux values
-         in the config_autoBrightnessLevels array.  This array should have size one greater
-         than the size of the config_autoBrightnessLevels array.
-         The brightness values must be between 0 and 255 and be non-decreasing.
-         This must be overridden in platform specific overlays -->
-    <integer-array name="config_autoBrightnessLcdBacklightValues">
-        <item>4</item>
-        <item>4</item>
-        <item>4</item>
-        <item>8</item>
-        <item>15</item>
-        <item>20</item>
-        <item>26</item>
-        <item>35</item>
-        <item>45</item>
-        <item>46</item>
-        <item>46</item>
-        <item>46</item>
-        <item>60</item>
-        <item>60</item>
-        <item>60</item>
-        <item>64</item>
-        <item>66</item>
-        <item>70</item>
-        <item>73</item>
-        <item>80</item>
-        <item>88</item>
-        <item>110</item>
-        <item>130</item>
-        <item>135</item>
-        <item>145</item>
-        <item>180</item>
-        <item>200</item>
-        <item>240</item>
-        <item>255</item>
-    </integer-array>
-
-    <!-- Boolean indicating if placing the phone face down will result in a screen off. -->
-    <bool name="config_flipToScreenOffEnabled">false</bool>
-
     <!-- Note: This config is deprecated, use BluetoothProperties instead.
          Idle current for bluetooth controller. 0 by default
     -->
@@ -181,15 +51,6 @@
         <item>/system/framework/services.jar</item>
         <item>/apex/com.android.media/javalib/updatable-media.jar</item>
         <item>/system/lib64/libsurfaceflinger.so</item>
-        <item>/system/fonts/MiSansVF.ttf</item>
-    </string-array>
-
-    <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
-         when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
-         where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
-         and Strength as defined in Authenticators.java -->
-    <string-array name="config_biometric_sensors" translatable="false">
-        <item>0:2:15</item>
     </string-array>
 
     <!-- Whether the device enable the standalone (SA) mode of 5G NR.-->

overlay/FrameworksResTarget_Vendor/res/xml/power_profile.xml

@@ -7,11 +7,11 @@
     <item name="none">0</item>
 
     <!-- Additional power used when screen is turned on at minimum brightness -->
-    <item name="screen.on">77.24</item>
+    <item name="screen.on">100</item>
 
     <!-- Additional power used when screen is at maximum brightness, compared to
          screen at minimum brightness -->
-    <item name="screen.full">365.32</item>
+    <item name="screen.full">580</item>
     <array name="cpu.clusters.cores">
         <value>4</value>
         <value>3</value>
@@ -21,9 +21,9 @@
     <!-- Different CPU speeds as reported in
          /sys/devices/system/cpu/cpu0/cpufreq/stats/scaling_available_frequencies -->
     <array name="cpu.core_speeds.cluster0">
-        <value>307200</value>
+        <value>300000</value>
         <value>403200</value>
-        <value>518400</value>
+        <value>499200</value>
         <value>614400</value>
         <value>729600</value>
         <value>844800</value>
@@ -41,21 +41,21 @@
     <!-- Additional power used by a CPU from cluster 0 when running at different
          speeds. Currently this measurement also includes cluster cost. -->
     <array name="cpu.core_power.cluster0">
-        <value>66.24</value>
-        <value>66.35</value>
-        <value>67.79</value>
-        <value>68.89</value>
-        <value>71.11</value>
-        <value>73.83</value>
-        <value>77.19</value>
-        <value>82.09</value>
-        <value>85.53</value>
-        <value>90.54</value>
-        <value>93.59</value>
-        <value>99.62</value>
-        <value>145.61</value>
-        <value>153.12</value>
-        <value>159.28</value>
+        <value>5</value>
+        <value>7</value>
+        <value>8</value>
+        <value>12</value>
+        <value>16</value>
+        <value>21</value>
+        <value>22</value>
+        <value>26</value>
+        <value>29</value>
+        <value>34</value>
+        <value>40</value>
+        <value>41</value>
+        <value>54</value>
+        <value>58</value>
+        <value>65</value>
     </array>
 
     <!-- Different CPU speeds as reported in
@@ -83,23 +83,23 @@
     <!-- Additional power used by a CPU from cluster 1 when running at different
          speeds. Currently this measurement also includes cluster cost. -->
     <array name="cpu.core_power.cluster1">
-        <value>90.6</value>
-        <value>99.95</value>
-        <value>108.69</value>
-        <value>118.55</value>
-        <value>128.94</value>
-        <value>138.22</value>
-        <value>150.24</value>
-        <value>166.41</value>
-        <value>185.44</value>
-        <value>197.55</value>
-        <value>220.12</value>
-        <value>250.31</value>
-        <value>301.33</value>
-        <value>340.1</value>
-        <value>380.41</value>
-        <value>432.32</value>
-        <value>479.55</value>
+        <value>33</value>
+        <value>42</value>
+        <value>51</value>
+        <value>59</value>
+        <value>70</value>
+        <value>75</value>
+        <value>88</value>
+        <value>101</value>
+        <value>122</value>
+        <value>130</value>
+        <value>151</value>
+        <value>181</value>
+        <value>207</value>
+        <value>233</value>
+        <value>278</value>
+        <value>314</value>
+        <value>335</value>
     </array>
     <array name="cpu.core_speeds.cluster2">
         <value>806400</value>
@@ -124,79 +124,77 @@
         <value>2841600</value>
     </array>
     <array name="cpu.core_power.cluster2">
-        <value>136.66</value>
-        <value>153.76</value>
-        <value>162.38</value>
-        <value>177.63</value>
-        <value>191.21</value>
-        <value>209.33</value>
-        <value>228.41</value>
-        <value>249.44</value>
-        <value>274.14</value>
-        <value>302.71</value>
-        <value>303.64</value>
-        <value>378.2</value>
-        <value>430.63</value>
-        <value>482.17</value>
-        <value>541.19</value>
-        <value>615.27</value>
-        <value>705.64</value>
-        <value>818.93</value>
-        <value>930.17</value>
-        <value>937.03</value>
+        <value>86</value>
+        <value>96</value>
+        <value>109</value>
+        <value>127</value>
+        <value>142</value>
+        <value>158</value>
+        <value>169</value>
+        <value>190</value>
+        <value>207</value>
+        <value>231</value>
+        <value>270</value>
+        <value>290</value>
+        <value>333</value>
+        <value>386</value>
+        <value>428</value>
+        <value>487</value>
+        <value>554</value>
+        <value>616</value>
+        <value>684</value>
+        <value>686</value>
     </array>
 
   <!-- Additional power consumption by CPU excluding cluster and core when
        running -->
-    <item name="cpu.active">23.50</item>
+    <item name="cpu.active">8.5</item>
 
   <!-- Current when CPU is idle -->
-    <item name="cpu.idle">8.18</item>
+    <item name="cpu.idle">0.1</item>
 
     <!-- Power consumption when CPU is suspended -->
     <item name="cpu.suspend">0</item>
 
   <!-- This is the battery capacity in mAh (measured at nominal voltage) -->
-    <item name="battery.capacity">4500</item>
-    <item name="wifi.on">1.62</item>
-    <item name="wifi.active">267.74</item>
-    <item name="wifi.scan">72.58</item>
-    <item name="dsp.audio">23.28</item>
-    <item name="dsp.video">67.05</item>
-    <item name="camera.flashlight">143.35</item>
-    <item name="camera.avg">696.90</item>
-    <item name="gps.on">2.12</item>
-    <item name="radio.active">485.02</item>
-    <item name="radio.scanning">37.18</item>
+    <item name="battery.capacity">4040</item>
+    <item name="wifi.on">0.1</item>
+    <item name="wifi.active">173</item>
+    <item name="wifi.scan">0.5</item>
+    <item name="dsp.audio">25</item>
+    <item name="dsp.video">81</item>
+    <item name="camera.flashlight">550</item>
+    <item name="camera.avg">390</item>
+    <item name="gps.on">13.5</item>
+    <item name="radio.active">170</item>
+    <item name="radio.scanning">5.8</item>
     <array name="radio.on">
-        <value>86</value>
+        <value>95</value>
         <value>8</value>
     </array>
     <item name="modem.controller.idle">6</item>
-    <item name="modem.controller.rx">180</item>
-    <item name="modem.controller.tx">186</item>
-    <item name="modem.controller.voltage">3700</item>
+    <item name="modem.controller.rx">204</item>
+    <item name="modem.controller.tx">220</item>
+    <item name="modem.controller.voltage">4000</item>
 
   <!-- Memory bandwidth power values in mA at the rail. There must be one value
        for each bucket defined in the device tree. -->
     <array name="memory.bandwidths">
-        <value>17</value>
+        <value>21</value>
     </array>
 
   <!-- Idle Receive current for wifi radio in mA. 0 by default-->
     <item name="wifi.controller.idle">1</item>
 
   <!-- Rx current for wifi radio in mA. 0 by default-->
-    <item name="wifi.controller.rx">176</item>
+    <item name="wifi.controller.rx">170</item>
 
   <!-- Tx current for wifi radio in mA. 0 by default-->
-    <item name="wifi.controller.tx">200</item>
-    <array name="wifi.controller.tx_levels">
-        <value>1</value>
-    </array>
+    <item name="wifi.controller.tx">210</item>
+    <array name="wifi.controller.tx_levels">1 </array>
 
   <!-- Operating volatage for wifi radio in mV. 0 by default-->
-    <item name="wifi.controller.voltage">3700</item>
+    <item name="wifi.controller.voltage">4000</item>
     <array name="wifi.batchedscan">
         <value>.0001</value>
         <value>.001</value>
@@ -204,7 +202,7 @@
         <value>.1</value>
         <value>1</value>
     </array>
-    <item name="bluetooth.active">83.37</item>
-    <item name="bluetooth.on">0.62</item>
-    <item name="bluetooth.controller.voltage">3700</item>
+    <item name="bluetooth.active">130</item>
+    <item name="bluetooth.on">0.8</item>
+    <item name="bluetooth.controller.voltage">4000</item>
 </device>