|
|
@@ -7,371 +7,6 @@
|
|
|
<!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
|
|
|
<integer name="config_shutdownBatteryTemperature">580</integer>
|
|
|
|
|
|
- <!-- Minimum screen brightness setting allowed by power manager.
|
|
|
- -2 is invalid so setting will resort to int value specified above.
|
|
|
- Set this to 0.0 to allow screen to go to minimal brightness.
|
|
|
- The user is forbidden from setting the brightness below this level. -->
|
|
|
- <item format="float" name="config_screenBrightnessSettingMinimumFloat" type="dimen">0</item>
|
|
|
-
|
|
|
- <!-- Maximum screen brightness allowed by the power manager.
|
|
|
- -2 is invalid so setting will resort to int value specified above.
|
|
|
- Set this to 1.0 for maximum brightness range.
|
|
|
- The user is forbidden from setting the brightness above this level. -->
|
|
|
- <item format="float" name="config_screenBrightnessSettingMaximumFloat" type="dimen">1</item>
|
|
|
-
|
|
|
- <!-- Default screen brightness setting set.
|
|
|
- -2 is invalid so setting will resort to int value specified above.
|
|
|
- Must be in the range specified by minimum and maximum. -->
|
|
|
- <item format="float" name="config_screenBrightnessSettingDefaultFloat" type="dimen">0.5</item>
|
|
|
-
|
|
|
- <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used
|
|
|
- for debouncing the light sensor. Different constants are used to debounce the light sensor
|
|
|
- when adapting to brighter or darker environments. This parameter controls how quickly
|
|
|
- brightness changes occur in response to an observed change in light level that exceeds the
|
|
|
- hysteresis threshold. -->
|
|
|
- <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
|
|
|
- <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
|
|
|
-
|
|
|
- <!-- The maximum range of gamma adjustment possible using the screen
|
|
|
- auto-brightness adjustment setting. -->
|
|
|
- <fraction name="config_autoBrightnessAdjustmentMaxGamma">100.0%</fraction>
|
|
|
-
|
|
|
- <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
|
|
|
- The N entries of this array define N + 1 control points as follows:
|
|
|
- (1-based arrays)
|
|
|
-
|
|
|
- Point 1: (0, value[1]): lux <= 0
|
|
|
- Point 2: (level[1], value[2]): 0 < lux <= level[1]
|
|
|
- Point 3: (level[2], value[3]): level[2] < lux <= level[3]
|
|
|
- ...
|
|
|
- Point N+1: (level[N], value[N+1]): level[N] < lux
|
|
|
-
|
|
|
- The control points must be strictly increasing. Each control point
|
|
|
- corresponds to an entry in the brightness backlight values arrays.
|
|
|
- For example, if lux == level[1] (first element of the levels array)
|
|
|
- then the brightness will be determined by value[2] (second element
|
|
|
- of the brightness values array).
|
|
|
-
|
|
|
- Spline interpolation is used to determine the auto-brightness
|
|
|
- backlight values for lux levels between these control points.
|
|
|
-
|
|
|
- Must be overridden in platform specific overlays -->
|
|
|
- <integer-array name="config_autoBrightnessLevels">
|
|
|
- <item>1</item>
|
|
|
- <item>2</item>
|
|
|
- <item>4</item>
|
|
|
- <item>6</item>
|
|
|
- <item>8</item>
|
|
|
- <item>10</item>
|
|
|
- <item>15</item>
|
|
|
- <item>20</item>
|
|
|
- <item>25</item>
|
|
|
- <item>30</item>
|
|
|
- <item>35</item>
|
|
|
- <item>40</item>
|
|
|
- <item>45</item>
|
|
|
- <item>50</item>
|
|
|
- <item>55</item>
|
|
|
- <item>60</item>
|
|
|
- <item>65</item>
|
|
|
- <item>70</item>
|
|
|
- <item>75</item>
|
|
|
- <item>80</item>
|
|
|
- <item>85</item>
|
|
|
- <item>90</item>
|
|
|
- <item>95</item>
|
|
|
- <item>100</item>
|
|
|
- <item>120</item>
|
|
|
- <item>140</item>
|
|
|
- <item>160</item>
|
|
|
- <item>180</item>
|
|
|
- <item>200</item>
|
|
|
- <item>220</item>
|
|
|
- <item>240</item>
|
|
|
- <item>260</item>
|
|
|
- <item>280</item>
|
|
|
- <item>300</item>
|
|
|
- <item>320</item>
|
|
|
- <item>340</item>
|
|
|
- <item>360</item>
|
|
|
- <item>380</item>
|
|
|
- <item>400</item>
|
|
|
- <item>420</item>
|
|
|
- <item>440</item>
|
|
|
- <item>460</item>
|
|
|
- <item>480</item>
|
|
|
- <item>500</item>
|
|
|
- <item>700</item>
|
|
|
- <item>900</item>
|
|
|
- <item>1100</item>
|
|
|
- <item>1300</item>
|
|
|
- <item>1500</item>
|
|
|
- <item>1700</item>
|
|
|
- <item>1900</item>
|
|
|
- <item>2000</item>
|
|
|
- <item>2500</item>
|
|
|
- <item>3000</item>
|
|
|
- <item>3500</item>
|
|
|
- <item>4000</item>
|
|
|
- <item>4500</item>
|
|
|
- <item>5000</item>
|
|
|
- <item>5500</item>
|
|
|
- <item>6000</item>
|
|
|
- <item>6500</item>
|
|
|
- <item>7000</item>
|
|
|
- <item>7500</item>
|
|
|
- <item>8000</item>
|
|
|
- <item>8500</item>
|
|
|
- <item>9000</item>
|
|
|
- <item>9500</item>
|
|
|
- <item>10000</item>
|
|
|
- <item>10500</item>
|
|
|
- <item>11000</item>
|
|
|
- <item>11500</item>
|
|
|
- <item>12000</item>
|
|
|
- <item>12500</item>
|
|
|
- <item>13000</item>
|
|
|
- <item>13500</item>
|
|
|
- <item>14000</item>
|
|
|
- <item>14500</item>
|
|
|
- <item>15000</item>
|
|
|
- <item>16000</item>
|
|
|
- <item>17000</item>
|
|
|
- <item>18000</item>
|
|
|
- <item>19000</item>
|
|
|
- <item>20000</item>
|
|
|
- <item>21000</item>
|
|
|
- <item>22000</item>
|
|
|
- <item>23000</item>
|
|
|
- <item>24000</item>
|
|
|
- <item>25000</item>
|
|
|
- <item>26000</item>
|
|
|
- <item>27000</item>
|
|
|
- <item>28000</item>
|
|
|
- <item>29000</item>
|
|
|
- <item>30000</item>
|
|
|
- <item>35000</item>
|
|
|
- <item>40000</item>
|
|
|
- <item>45000</item>
|
|
|
- <item>50000</item>
|
|
|
- <item>55000</item>
|
|
|
- <item>60000</item>
|
|
|
- <item>65000</item>
|
|
|
- <item>70000</item>
|
|
|
- <item>75000</item>
|
|
|
- <item>80000</item>
|
|
|
- <item>85000</item>
|
|
|
- <item>90000</item>
|
|
|
- <item>95000</item>
|
|
|
- <item>100000</item>
|
|
|
- </integer-array>
|
|
|
-
|
|
|
- <!-- Array of output values for LCD backlight corresponding to the lux values
|
|
|
- in the config_autoBrightnessLevels array. This array should have size one greater
|
|
|
- than the size of the config_autoBrightnessLevels array.
|
|
|
- The brightness values must be between 0 and 255 and be non-decreasing.
|
|
|
- This must be overridden in platform specific overlays -->
|
|
|
- <integer-array name="config_autoBrightnessLcdBacklightValues" />
|
|
|
-
|
|
|
- <!-- Array of desired screen brightness in nits corresponding to the lux values
|
|
|
- in the config_autoBrightnessLevels array. The display brightness is defined as the measured
|
|
|
- brightness of an all-white image.
|
|
|
-
|
|
|
- If this is defined then:
|
|
|
- - config_autoBrightnessLcdBacklightValues should not be defined
|
|
|
- - config_screenBrightnessNits must be defined
|
|
|
- - config_screenBrightnessBacklight must be defined
|
|
|
-
|
|
|
- This array should have size one greater than the size of the config_autoBrightnessLevels
|
|
|
- array. The brightness values must be non-negative and non-decreasing. This must be
|
|
|
- overridden in platform specific overlays -->
|
|
|
- <array name="config_autoBrightnessDisplayValuesNits">
|
|
|
- <item>2.0</item>
|
|
|
- <item>2.5</item>
|
|
|
- <item>2.8</item>
|
|
|
- <item>16.3</item>
|
|
|
- <item>26.2</item>
|
|
|
- <item>32.0</item>
|
|
|
- <item>36.9</item>
|
|
|
- <item>49.4</item>
|
|
|
- <item>63.7</item>
|
|
|
- <item>82.5</item>
|
|
|
- <item>89.9</item>
|
|
|
- <item>91.6</item>
|
|
|
- <item>91.6</item>
|
|
|
- <item>91.6</item>
|
|
|
- <item>93.0</item>
|
|
|
- <item>93.0</item>
|
|
|
- <item>93.0</item>
|
|
|
- <item>94.6</item>
|
|
|
- <item>94.6</item>
|
|
|
- <item>95.7</item>
|
|
|
- <item>95.7</item>
|
|
|
- <item>95.7</item>
|
|
|
- <item>95.7</item>
|
|
|
- <item>97.2</item>
|
|
|
- <item>97.2</item>
|
|
|
- <item>98.4</item>
|
|
|
- <item>101.2</item>
|
|
|
- <item>102.2</item>
|
|
|
- <item>103.8</item>
|
|
|
- <item>106.3</item>
|
|
|
- <item>107.7</item>
|
|
|
- <item>110.2</item>
|
|
|
- <item>111.6</item>
|
|
|
- <item>114.0</item>
|
|
|
- <item>115.2</item>
|
|
|
- <item>116.5</item>
|
|
|
- <item>120.4</item>
|
|
|
- <item>121.1</item>
|
|
|
- <item>122.6</item>
|
|
|
- <item>125.3</item>
|
|
|
- <item>126.5</item>
|
|
|
- <item>128.7</item>
|
|
|
- <item>129.6</item>
|
|
|
- <item>132.1</item>
|
|
|
- <item>134.0</item>
|
|
|
- <item>156.3</item>
|
|
|
- <item>174.4</item>
|
|
|
- <item>193.5</item>
|
|
|
- <item>223.4</item>
|
|
|
- <item>252.0</item>
|
|
|
- <item>290.1</item>
|
|
|
- <item>315.4</item>
|
|
|
- <item>332.4</item>
|
|
|
- <item>404.2</item>
|
|
|
- <item>433.1</item>
|
|
|
- <item>446.1</item>
|
|
|
- <item>460.9</item>
|
|
|
- <item>474.8</item>
|
|
|
- <item>488.7</item>
|
|
|
- <item>500.0</item>
|
|
|
- <item>500.0</item>
|
|
|
- <item>512.5</item>
|
|
|
- <item>525.0</item>
|
|
|
- <item>537.5</item>
|
|
|
- <item>550.0</item>
|
|
|
- <item>562.5</item>
|
|
|
- <item>575.0</item>
|
|
|
- <item>587.5</item>
|
|
|
- <item>600.0</item>
|
|
|
- <item>610.0</item>
|
|
|
- <item>620.0</item>
|
|
|
- <item>630.0</item>
|
|
|
- <item>640.0</item>
|
|
|
- <item>650.0</item>
|
|
|
- <item>660.0</item>
|
|
|
- <item>670.0</item>
|
|
|
- <item>680.0</item>
|
|
|
- <item>690.0</item>
|
|
|
- <item>700.0</item>
|
|
|
- <item>705.0</item>
|
|
|
- <item>710.0</item>
|
|
|
- <item>715.0</item>
|
|
|
- <item>720.0</item>
|
|
|
- <item>725.0</item>
|
|
|
- <item>730.0</item>
|
|
|
- <item>735.0</item>
|
|
|
- <item>740.0</item>
|
|
|
- <item>745.0</item>
|
|
|
- <item>750.0</item>
|
|
|
- <item>755.0</item>
|
|
|
- <item>760.0</item>
|
|
|
- <item>765.0</item>
|
|
|
- <item>770.0</item>
|
|
|
- <item>775.0</item>
|
|
|
- <item>800.0</item>
|
|
|
- <item>816.7</item>
|
|
|
- <item>833.3</item>
|
|
|
- <item>850.0</item>
|
|
|
- <item>866.7</item>
|
|
|
- <item>883.3</item>
|
|
|
- <item>900.0</item>
|
|
|
- <item>914.3</item>
|
|
|
- <item>928.6</item>
|
|
|
- <item>942.9</item>
|
|
|
- <item>957.1</item>
|
|
|
- <item>971.4</item>
|
|
|
- <item>985.7</item>
|
|
|
- <item>1000.0</item>
|
|
|
- </array>
|
|
|
-
|
|
|
- <!-- An array describing the screen's backlight values corresponding to the brightness
|
|
|
- values in the config_screenBrightnessNits array.
|
|
|
-
|
|
|
- This array should be equal in size to config_screenBrightnessBacklight. -->
|
|
|
- <integer-array name="config_screenBrightnessBacklight">
|
|
|
- <item>1</item>
|
|
|
- <item>255</item>
|
|
|
- </integer-array>
|
|
|
-
|
|
|
- <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
|
|
|
- values in the config_screenBrightnessBacklight array. On OLED displays these values
|
|
|
- should be measured with an all white image while the display is in the fully on state.
|
|
|
- Note that this value should *not* reflect the maximum brightness value for any high
|
|
|
- brightness modes but only the maximum brightness value obtainable in a sustainable manner.
|
|
|
-
|
|
|
- This array should be equal in size to config_screenBrightnessBacklight -->
|
|
|
- <array name="config_screenBrightnessNits">
|
|
|
- <item>2.0</item>
|
|
|
- <item>850.0</item>
|
|
|
- </array>
|
|
|
-
|
|
|
- <!-- Array of ambient lux threshold values. This is used for determining hysteresis constraint
|
|
|
- values by calculating the index to use for lookup and then setting the constraint value
|
|
|
- to the corresponding value of the array. The new brightening hysteresis constraint value
|
|
|
- is the n-th element of config_ambientBrighteningThresholds, and the new darkening
|
|
|
- hysteresis constraint value is the n-th element of config_ambientDarkeningThresholds.
|
|
|
-
|
|
|
- The (zero-based) index is calculated as follows: (MAX is the largest index of the array)
|
|
|
- condition calculated index
|
|
|
- value < level[0] 0
|
|
|
- level[n] <= value < level[n+1] n+1
|
|
|
- level[MAX] <= value MAX+1 -->
|
|
|
- <integer-array name="config_ambientThresholdLevels">
|
|
|
- <item>2</item>
|
|
|
- <item>10</item>
|
|
|
- <item>30</item>
|
|
|
- <item>100</item>
|
|
|
- <item>800</item>
|
|
|
- <item>2000</item>
|
|
|
- <item>4000</item>
|
|
|
- </integer-array>
|
|
|
-
|
|
|
- <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
|
|
|
- percent. The length of this array is assumed to be one greater than
|
|
|
- config_ambientThresholdLevels. The brightening threshold is calculated as
|
|
|
- lux * (1.0f + CONSTRAINT_VALUE). When the current lux is higher than this threshold,
|
|
|
- the screen brightness is recalculated. See the config_ambientThresholdLevels
|
|
|
- description for how the constraint value is chosen. -->
|
|
|
- <integer-array name="config_ambientBrighteningThresholds">
|
|
|
- <item>2</item>
|
|
|
- <item>6</item>
|
|
|
- <item>10</item>
|
|
|
- <item>30</item>
|
|
|
- <item>100</item>
|
|
|
- <item>400</item>
|
|
|
- <item>600</item>
|
|
|
- <item>1000</item>
|
|
|
- </integer-array>
|
|
|
-
|
|
|
- <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
|
|
|
- percent. The length of this array is assumed to be one greater than
|
|
|
- config_ambientThresholdLevels. The darkening threshold is calculated as
|
|
|
- lux * (1.0f - CONSTRAINT_VALUE). When the current lux is lower than this threshold,
|
|
|
- the screen brightness is recalculated. See the config_ambientThresholdLevels
|
|
|
- description for how the constraint value is chosen. -->
|
|
|
- <integer-array name="config_ambientDarkeningThresholds">
|
|
|
- <item>800</item>
|
|
|
- <item>800</item>
|
|
|
- <item>500</item>
|
|
|
- <item>500</item>
|
|
|
- <item>500</item>
|
|
|
- <item>500</item>
|
|
|
- <item>500</item>
|
|
|
- <item>500</item>
|
|
|
- </integer-array>
|
|
|
-
|
|
|
<!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. -->
|
|
|
<bool name="config_dozePulsePickup">true</bool>
|
|
|
|
Arian