sm8450-common: rootdir: Drop useless init.qcom.class_core.sh

This did nothing for us:
`zeus:/ # bash -x /vendor/bin/init.qcom.class_core.sh
++ getprop ro.board.platform
+ target=taro
+ '[' -f /sys/devices/soc0/hw_platform ']'
++ cat /sys/devices/soc0/hw_platform
+ soc_hwplatform=MTP
+ '[' -f /sys/devices/soc0/soc_id ']'
++ cat /sys/devices/soc0/soc_id
+ soc_hwid=457
+ '[' -f /sys/devices/soc0/platform_version ']'
++ cat /sys/devices/soc0/platform_version
+ soc_hwver=65536
+ case "$target" in`

Change-Id: I6e0f4b123387582975b15c0c39272877909739bb

common.mk

@@ -423,7 +423,6 @@ PRODUCT_COPY_FILES += \
     $(LOCAL_PATH)/rootdir/bin/init.kernel.post_boot-diwali.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.kernel.post_boot-diwali.sh \
     $(LOCAL_PATH)/rootdir/bin/init.kernel.post_boot-taro.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.kernel.post_boot-taro.sh \
     $(LOCAL_PATH)/rootdir/bin/init.kernel.post_boot.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.kernel.post_boot.sh \
-    $(LOCAL_PATH)/rootdir/bin/init.qcom.class_core.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qcom.class_core.sh \
     $(LOCAL_PATH)/rootdir/bin/init.qcom.early_boot.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qcom.early_boot.sh \
     $(LOCAL_PATH)/rootdir/bin/init.qcom.post_boot.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qcom.post_boot.sh \
     $(LOCAL_PATH)/rootdir/bin/init.qcom.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.qcom.sh \

rootdir/bin/init.qcom.class_core.sh

@@ -1,163 +0,0 @@
-#!/vendor/bin/sh
-
-# Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of The Linux Foundation nor
-#       the names of its contributors may be used to endorse or promote
-#       products derived from this software without specific prior written
-#       permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# Set platform variables
-target=`getprop ro.board.platform`
-if [ -f /sys/devices/soc0/hw_platform ]; then
-    soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
-else
-    soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
-fi
-if [ -f /sys/devices/soc0/soc_id ]; then
-    soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null
-else
-    soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
-fi
-if [ -f /sys/devices/soc0/platform_version ]; then
-    soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null
-else
-    soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null
-fi
-
-
-# Dynamic Memory Managment (DMM) provides a sys file system to the userspace
-# that can be used to plug in/out memory that has been configured as unstable.
-# This unstable memory can be in Active or In-Active State.
-# Each of which the userspace can request by writing to a sys file.
-#
-# ro.dev.dmm = 1; Indicates that DMM is enabled in the Android User Space. This
-# property is set in the Android system properties file.
-#
-# If ro.dev.dmm.dpd.start_address is set here then the target has a memory
-# configuration that supports DynamicMemoryManagement.
-init_DMM()
-{
-    block=-1
-
-    case "$target" in
-    "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "msm8960")
-        ;;
-    *)
-        return
-        ;;
-    esac
-
-    mem="/sys/devices/system/memory"
-    op=`cat $mem/movable_start_bytes`
-    case "$op" in
-    "0")
-        log -p i -t DMM DMM Disabled. movable_start_bytes not set: $op
-        ;;
-
-    "$mem/movable_start_bytes: No such file or directory ")
-        log -p i -t DMM DMM Disabled. movable_start_bytes does not exist: $op
-        ;;
-
-    *)
-        log -p i -t DMM DMM available. movable_start_bytes at $op
-        movable_start_bytes=0x`cat $mem/movable_start_bytes`
-        block_size_bytes=0x`cat $mem/block_size_bytes`
-        block=$((#${movable_start_bytes}/${block_size_bytes}))
-
-        chown -h system.system $mem/memory$block/state
-        chown -h system.system $mem/probe
-        chown -h system.system $mem/active
-        chown -h system.system $mem/remove
-
-        case "$target" in
-        "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
-            echo $movable_start_bytes > $mem/probe
-            case "$?" in
-            "0")
-                log -p i -t DMM $movable_start_bytes to physical hotplug succeeded.
-                ;;
-            *)
-                log -p e -t DMM $movable_start_bytes to physical hotplug failed.
-                return
-                ;;
-            esac
-
-            echo online > $mem/memory$block/state
-            case "$?" in
-            "0")
-                log -p i -t DMM \'echo online\' to logical hotplug succeeded.
-                ;;
-            *)
-                log -p e -t DMM \'echo online\' to logical hotplug failed.
-                return
-                ;;
-            esac
-            ;;
-        esac
-
-        setprop ro.dev.dmm.dpd.start_address $movable_start_bytes
-        setprop ro.dev.dmm.dpd.block $block
-        ;;
-    esac
-
-    case "$target" in
-    "msm8960")
-        return
-        ;;
-    esac
-
-    # For 7X30 targets:
-    # ro.dev.dmm.dpd.start_address is set when the target has a 2x256Mb memory
-    # configuration. This is also used to indicate that the target is capable of
-    # setting EBI-1 to Deep Power Down or Self Refresh.
-    op=`cat $mem/low_power_memory_start_bytes`
-    case "$op" in
-    "0")
-        log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes not set:$op
-        ;;
-    "$mem/low_power_memory_start_bytes No such file or directory ")
-        log -p i -t DMM Self-Refresh-Only Disabled. low_power_memory_start_bytes does not exist:$op
-        ;;
-    *)
-        log -p i -t DMM Self-Refresh-Only available. low_power_memory_start_bytes at $op
-        ;;
-    esac
-}
-
-case "$target" in
-    "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
-        insmod /system/lib/modules/ss_mfcinit.ko
-        insmod /system/lib/modules/ss_vencoder.ko
-        insmod /system/lib/modules/ss_vdecoder.ko
-        chmod -h 0666 /dev/ss_mfc_reg
-        chmod -h 0666 /dev/ss_vdec
-        chmod -h 0666 /dev/ss_venc
-
-        init_DMM
-        ;;
-
-    "msm8960")
-        init_DMM
-        ;;
-esac

rootdir/etc/init.qcom.rc

@@ -482,11 +482,6 @@ on property:vendor.media.target_variant=*
     setprop ro.media.xml_variant.codecs ${vendor.media.target_variant}
     setprop ro.media.xml_variant.codecs_performance ${vendor.media.target_variant}
 
-service qcom-c_core-sh  /vendor/bin/init.qcom.class_core.sh
-    class core
-    user root
-    oneshot
-
 service qcom-c_main-sh /vendor/bin/init.class_main.sh
     class main
     user root