123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284 |
- // SPDX-License-Identifier: GPL-2.0
- /*
- * Intel LGM USB PHY driver
- *
- * Copyright (C) 2020 Intel Corporation.
- */
- #include <linux/bitfield.h>
- #include <linux/delay.h>
- #include <linux/iopoll.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/platform_device.h>
- #include <linux/regulator/consumer.h>
- #include <linux/reset.h>
- #include <linux/usb/phy.h>
- #include <linux/workqueue.h>
- #define CTRL1_OFFSET 0x14
- #define SRAM_EXT_LD_DONE BIT(25)
- #define SRAM_INIT_DONE BIT(26)
- #define TCPC_OFFSET 0x1014
- #define TCPC_MUX_CTL GENMASK(1, 0)
- #define MUX_NC 0
- #define MUX_USB 1
- #define MUX_DP 2
- #define MUX_USBDP 3
- #define TCPC_FLIPPED BIT(2)
- #define TCPC_LOW_POWER_EN BIT(3)
- #define TCPC_VALID BIT(4)
- #define TCPC_CONN \
- (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_USB))
- #define TCPC_DISCONN \
- (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_NC) | TCPC_LOW_POWER_EN)
- static const char *const PHY_RESETS[] = { "phy31", "phy", };
- static const char *const CTL_RESETS[] = { "apb", "ctrl", };
- struct tca_apb {
- struct reset_control *resets[ARRAY_SIZE(PHY_RESETS)];
- struct regulator *vbus;
- struct work_struct wk;
- struct usb_phy phy;
- bool regulator_enabled;
- bool phy_initialized;
- bool connected;
- };
- static int get_flipped(struct tca_apb *ta, bool *flipped)
- {
- union extcon_property_value property;
- int ret;
- ret = extcon_get_property(ta->phy.edev, EXTCON_USB_HOST,
- EXTCON_PROP_USB_TYPEC_POLARITY, &property);
- if (ret) {
- dev_err(ta->phy.dev, "no polarity property from extcon\n");
- return ret;
- }
- *flipped = property.intval;
- return 0;
- }
- static int phy_init(struct usb_phy *phy)
- {
- struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
- void __iomem *ctrl1 = phy->io_priv + CTRL1_OFFSET;
- int val, ret, i;
- if (ta->phy_initialized)
- return 0;
- for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
- reset_control_deassert(ta->resets[i]);
- ret = readl_poll_timeout(ctrl1, val, val & SRAM_INIT_DONE, 10, 10 * 1000);
- if (ret) {
- dev_err(ta->phy.dev, "SRAM init failed, 0x%x\n", val);
- return ret;
- }
- writel(readl(ctrl1) | SRAM_EXT_LD_DONE, ctrl1);
- ta->phy_initialized = true;
- if (!ta->phy.edev) {
- writel(TCPC_CONN, ta->phy.io_priv + TCPC_OFFSET);
- return phy->set_vbus(phy, true);
- }
- schedule_work(&ta->wk);
- return ret;
- }
- static void phy_shutdown(struct usb_phy *phy)
- {
- struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
- int i;
- if (!ta->phy_initialized)
- return;
- ta->phy_initialized = false;
- flush_work(&ta->wk);
- ta->phy.set_vbus(&ta->phy, false);
- ta->connected = false;
- writel(TCPC_DISCONN, ta->phy.io_priv + TCPC_OFFSET);
- for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
- reset_control_assert(ta->resets[i]);
- }
- static int phy_set_vbus(struct usb_phy *phy, int on)
- {
- struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
- int ret;
- if (!!on == ta->regulator_enabled)
- return 0;
- if (on)
- ret = regulator_enable(ta->vbus);
- else
- ret = regulator_disable(ta->vbus);
- if (!ret)
- ta->regulator_enabled = on;
- dev_dbg(ta->phy.dev, "set vbus: %d\n", on);
- return ret;
- }
- static void tca_work(struct work_struct *work)
- {
- struct tca_apb *ta = container_of(work, struct tca_apb, wk);
- bool connected;
- bool flipped = false;
- u32 val;
- int ret;
- ret = get_flipped(ta, &flipped);
- if (ret)
- return;
- connected = extcon_get_state(ta->phy.edev, EXTCON_USB_HOST);
- if (connected == ta->connected)
- return;
- ta->connected = connected;
- if (connected) {
- val = TCPC_CONN;
- if (flipped)
- val |= TCPC_FLIPPED;
- dev_dbg(ta->phy.dev, "connected%s\n", flipped ? " flipped" : "");
- } else {
- val = TCPC_DISCONN;
- dev_dbg(ta->phy.dev, "disconnected\n");
- }
- writel(val, ta->phy.io_priv + TCPC_OFFSET);
- ret = ta->phy.set_vbus(&ta->phy, connected);
- if (ret)
- dev_err(ta->phy.dev, "failed to set VBUS\n");
- }
- static int id_notifier(struct notifier_block *nb, unsigned long event, void *ptr)
- {
- struct tca_apb *ta = container_of(nb, struct tca_apb, phy.id_nb);
- if (ta->phy_initialized)
- schedule_work(&ta->wk);
- return NOTIFY_DONE;
- }
- static int vbus_notifier(struct notifier_block *nb, unsigned long evnt, void *ptr)
- {
- return NOTIFY_DONE;
- }
- static int phy_probe(struct platform_device *pdev)
- {
- struct reset_control *resets[ARRAY_SIZE(CTL_RESETS)];
- struct device *dev = &pdev->dev;
- struct usb_phy *phy;
- struct tca_apb *ta;
- int i;
- ta = devm_kzalloc(dev, sizeof(*ta), GFP_KERNEL);
- if (!ta)
- return -ENOMEM;
- platform_set_drvdata(pdev, ta);
- INIT_WORK(&ta->wk, tca_work);
- phy = &ta->phy;
- phy->dev = dev;
- phy->label = dev_name(dev);
- phy->type = USB_PHY_TYPE_USB3;
- phy->init = phy_init;
- phy->shutdown = phy_shutdown;
- phy->set_vbus = phy_set_vbus;
- phy->id_nb.notifier_call = id_notifier;
- phy->vbus_nb.notifier_call = vbus_notifier;
- phy->io_priv = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(phy->io_priv))
- return PTR_ERR(phy->io_priv);
- ta->vbus = devm_regulator_get(dev, "vbus");
- if (IS_ERR(ta->vbus))
- return PTR_ERR(ta->vbus);
- for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) {
- resets[i] = devm_reset_control_get_exclusive(dev, CTL_RESETS[i]);
- if (IS_ERR(resets[i])) {
- dev_err(dev, "%s reset not found\n", CTL_RESETS[i]);
- return PTR_ERR(resets[i]);
- }
- }
- for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) {
- ta->resets[i] = devm_reset_control_get_exclusive(dev, PHY_RESETS[i]);
- if (IS_ERR(ta->resets[i])) {
- dev_err(dev, "%s reset not found\n", PHY_RESETS[i]);
- return PTR_ERR(ta->resets[i]);
- }
- }
- for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++)
- reset_control_assert(resets[i]);
- for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
- reset_control_assert(ta->resets[i]);
- /*
- * Out-of-band reset of the controller after PHY reset will cause
- * controller malfunctioning, so we should use in-band controller
- * reset only and leave the controller de-asserted here.
- */
- for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++)
- reset_control_deassert(resets[i]);
- /* Need to wait at least 20us after de-assert the controller */
- usleep_range(20, 100);
- return usb_add_phy_dev(phy);
- }
- static int phy_remove(struct platform_device *pdev)
- {
- struct tca_apb *ta = platform_get_drvdata(pdev);
- usb_remove_phy(&ta->phy);
- return 0;
- }
- static const struct of_device_id intel_usb_phy_dt_ids[] = {
- { .compatible = "intel,lgm-usb-phy" },
- { }
- };
- MODULE_DEVICE_TABLE(of, intel_usb_phy_dt_ids);
- static struct platform_driver lgm_phy_driver = {
- .driver = {
- .name = "lgm-usb-phy",
- .of_match_table = intel_usb_phy_dt_ids,
- },
- .probe = phy_probe,
- .remove = phy_remove,
- };
- module_platform_driver(lgm_phy_driver);
- MODULE_DESCRIPTION("Intel LGM USB PHY driver");
- MODULE_AUTHOR("Li Yin <[email protected]>");
- MODULE_AUTHOR("Vadivel Murugan R <[email protected]>");
- MODULE_LICENSE("GPL v2");
|