| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495 |
- /* SPDX-License-Identifier: GPL-2.0-only */
- /*
- * atusb.h - Definitions shared between kernel and ATUSB firmware
- *
- * Written 2013 by Werner Almesberger <[email protected]>
- *
- * (at your option) any later version.
- *
- * This file should be identical for kernel and firmware.
- * Kernel: drivers/net/ieee802154/atusb.h
- * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
- */
- #ifndef _ATUSB_H
- #define _ATUSB_H
- #define ATUSB_VENDOR_ID 0x20b7 /* Qi Hardware*/
- #define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */
- /* -- - - */
- #define ATUSB_BUILD_SIZE 256 /* maximum build version/date message length */
- /* Commands to our device. Make sure this is synced with the firmware */
- enum atusb_requests {
- ATUSB_ID = 0x00, /* system status/control grp */
- ATUSB_BUILD,
- ATUSB_RESET,
- ATUSB_RF_RESET = 0x10, /* debug/test group */
- ATUSB_POLL_INT,
- ATUSB_TEST, /* atusb-sil only */
- ATUSB_TIMER,
- ATUSB_GPIO,
- ATUSB_SLP_TR,
- ATUSB_GPIO_CLEANUP,
- ATUSB_REG_WRITE = 0x20, /* transceiver group */
- ATUSB_REG_READ,
- ATUSB_BUF_WRITE,
- ATUSB_BUF_READ,
- ATUSB_SRAM_WRITE,
- ATUSB_SRAM_READ,
- ATUSB_SPI_WRITE = 0x30, /* SPI group */
- ATUSB_SPI_READ1,
- ATUSB_SPI_READ2,
- ATUSB_SPI_WRITE2_SYNC,
- ATUSB_RX_MODE = 0x40, /* HardMAC group */
- ATUSB_TX,
- ATUSB_EUI64_WRITE = 0x50, /* Parameter in EEPROM grp */
- ATUSB_EUI64_READ,
- };
- enum {
- ATUSB_HW_TYPE_100813, /* 2010-08-13 */
- ATUSB_HW_TYPE_101216, /* 2010-12-16 */
- ATUSB_HW_TYPE_110131, /* 2011-01-31, ATmega32U2-based */
- ATUSB_HW_TYPE_RZUSB, /* Atmel Raven USB dongle with at86rf230 */
- ATUSB_HW_TYPE_HULUSB, /* Busware HUL USB dongle with at86rf212 */
- };
- /*
- * Direction bRequest wValue wIndex wLength
- *
- * ->host ATUSB_ID - - 3
- * ->host ATUSB_BUILD - - #bytes
- * host-> ATUSB_RESET - - 0
- *
- * host-> ATUSB_RF_RESET - - 0
- * ->host ATUSB_POLL_INT - - 1
- * host-> ATUSB_TEST - - 0
- * ->host ATUSB_TIMER - - #bytes (6)
- * ->host ATUSB_GPIO dir+data mask+p# 3
- * host-> ATUSB_SLP_TR - - 0
- * host-> ATUSB_GPIO_CLEANUP - - 0
- *
- * host-> ATUSB_REG_WRITE value addr 0
- * ->host ATUSB_REG_READ - addr 1
- * host-> ATUSB_BUF_WRITE - - #bytes
- * ->host ATUSB_BUF_READ - - #bytes
- * host-> ATUSB_SRAM_WRITE - addr #bytes
- * ->host ATUSB_SRAM_READ - addr #bytes
- *
- * host-> ATUSB_SPI_WRITE byte0 byte1 #bytes
- * ->host ATUSB_SPI_READ1 byte0 - #bytes
- * ->host ATUSB_SPI_READ2 byte0 byte1 #bytes
- * ->host ATUSB_SPI_WRITE2_SYNC byte0 byte1 0/1
- *
- * host-> ATUSB_RX_MODE on - 0
- * host-> ATUSB_TX flags ack_seq #bytes
- * host-> ATUSB_EUI64_WRITE - - #bytes (8)
- * ->host ATUSB_EUI64_READ - - #bytes (8)
- */
- #define ATUSB_REQ_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN)
- #define ATUSB_REQ_TO_DEV (USB_TYPE_VENDOR | USB_DIR_OUT)
- #endif /* !_ATUSB_H */
|
