pata_platform.c 6.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238
  1. /*
  2. * Generic platform device PATA driver
  3. *
  4. * Copyright (C) 2006 - 2007 Paul Mundt
  5. *
  6. * Based on pata_pcmcia:
  7. *
  8. * Copyright 2005-2006 Red Hat Inc, all rights reserved.
  9. *
  10. * This file is subject to the terms and conditions of the GNU General Public
  11. * License. See the file "COPYING" in the main directory of this archive
  12. * for more details.
  13. */
  14. #include <linux/kernel.h>
  15. #include <linux/module.h>
  16. #include <linux/blkdev.h>
  17. #include <scsi/scsi_host.h>
  18. #include <linux/ata.h>
  19. #include <linux/libata.h>
  20. #include <linux/platform_device.h>
  21. #include <linux/ata_platform.h>
  22. #define DRV_NAME "pata_platform"
  23. #define DRV_VERSION "1.2"
  24. static int pio_mask = 1;
  25. module_param(pio_mask, int, 0);
  26. MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default");
  27. /*
  28. * Provide our own set_mode() as we don't want to change anything that has
  29. * already been configured..
  30. */
  31. static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unused)
  32. {
  33. struct ata_device *dev;
  34. ata_for_each_dev(dev, link, ENABLED) {
  35. /* We don't really care */
  36. dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
  37. dev->xfer_shift = ATA_SHIFT_PIO;
  38. dev->flags |= ATA_DFLAG_PIO;
  39. ata_dev_info(dev, "configured for PIO\n");
  40. }
  41. return 0;
  42. }
  43. static struct scsi_host_template pata_platform_sht = {
  44. ATA_PIO_SHT(DRV_NAME),
  45. };
  46. static void pata_platform_setup_port(struct ata_ioports *ioaddr,
  47. unsigned int shift)
  48. {
  49. /* Fixup the port shift for platforms that need it */
  50. ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift);
  51. ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift);
  52. ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
  53. ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift);
  54. ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift);
  55. ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift);
  56. ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift);
  57. ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift);
  58. ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift);
  59. ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift);
  60. }
  61. /**
  62. * __pata_platform_probe - attach a platform interface
  63. * @dev: device
  64. * @io_res: Resource representing I/O base
  65. * @ctl_res: Resource representing CTL base
  66. * @irq_res: Resource representing IRQ and its flags
  67. * @ioport_shift: I/O port shift
  68. * @__pio_mask: PIO mask
  69. * @sht: scsi_host_template to use when registering
  70. * @use16bit: Flag to indicate 16-bit IO instead of 32-bit
  71. *
  72. * Register a platform bus IDE interface. Such interfaces are PIO and we
  73. * assume do not support IRQ sharing.
  74. *
  75. * Platform devices are expected to contain at least 2 resources per port:
  76. *
  77. * - I/O Base (IORESOURCE_IO or IORESOURCE_MEM)
  78. * - CTL Base (IORESOURCE_IO or IORESOURCE_MEM)
  79. *
  80. * and optionally:
  81. *
  82. * - IRQ (IORESOURCE_IRQ)
  83. *
  84. * If the base resources are both mem types, the ioremap() is handled
  85. * here. For IORESOURCE_IO, it's assumed that there's no remapping
  86. * necessary.
  87. *
  88. * If no IRQ resource is present, PIO polling mode is used instead.
  89. */
  90. int __pata_platform_probe(struct device *dev, struct resource *io_res,
  91. struct resource *ctl_res, struct resource *irq_res,
  92. unsigned int ioport_shift, int __pio_mask,
  93. struct scsi_host_template *sht, bool use16bit)
  94. {
  95. struct ata_host *host;
  96. struct ata_port *ap;
  97. unsigned int mmio;
  98. int irq = 0;
  99. int irq_flags = 0;
  100. /*
  101. * Check for MMIO
  102. */
  103. mmio = (( io_res->flags == IORESOURCE_MEM) &&
  104. (ctl_res->flags == IORESOURCE_MEM));
  105. /*
  106. * And the IRQ
  107. */
  108. if (irq_res && irq_res->start > 0) {
  109. irq = irq_res->start;
  110. irq_flags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
  111. }
  112. /*
  113. * Now that that's out of the way, wire up the port..
  114. */
  115. host = ata_host_alloc(dev, 1);
  116. if (!host)
  117. return -ENOMEM;
  118. ap = host->ports[0];
  119. ap->ops = devm_kzalloc(dev, sizeof(*ap->ops), GFP_KERNEL);
  120. if (!ap->ops)
  121. return -ENOMEM;
  122. ap->ops->inherits = &ata_sff_port_ops;
  123. ap->ops->cable_detect = ata_cable_unknown;
  124. ap->ops->set_mode = pata_platform_set_mode;
  125. if (use16bit)
  126. ap->ops->sff_data_xfer = ata_sff_data_xfer;
  127. else
  128. ap->ops->sff_data_xfer = ata_sff_data_xfer32;
  129. ap->pio_mask = __pio_mask;
  130. ap->flags |= ATA_FLAG_SLAVE_POSS;
  131. /*
  132. * Use polling mode if there's no IRQ
  133. */
  134. if (!irq) {
  135. ap->flags |= ATA_FLAG_PIO_POLLING;
  136. ata_port_desc(ap, "no IRQ, using PIO polling");
  137. }
  138. /*
  139. * Handle the MMIO case
  140. */
  141. if (mmio) {
  142. ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
  143. resource_size(io_res));
  144. ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
  145. resource_size(ctl_res));
  146. } else {
  147. ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
  148. resource_size(io_res));
  149. ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
  150. resource_size(ctl_res));
  151. }
  152. if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
  153. dev_err(dev, "failed to map IO/CTL base\n");
  154. return -ENOMEM;
  155. }
  156. ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
  157. pata_platform_setup_port(&ap->ioaddr, ioport_shift);
  158. ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
  159. (unsigned long long)io_res->start,
  160. (unsigned long long)ctl_res->start);
  161. /* activate */
  162. return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
  163. irq_flags, sht);
  164. }
  165. EXPORT_SYMBOL_GPL(__pata_platform_probe);
  166. static int pata_platform_probe(struct platform_device *pdev)
  167. {
  168. struct resource *io_res;
  169. struct resource *ctl_res;
  170. struct resource *irq_res;
  171. struct pata_platform_info *pp_info = dev_get_platdata(&pdev->dev);
  172. /*
  173. * Simple resource validation ..
  174. */
  175. if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
  176. dev_err(&pdev->dev, "invalid number of resources\n");
  177. return -EINVAL;
  178. }
  179. /*
  180. * Get the I/O base first
  181. */
  182. io_res = platform_get_mem_or_io(pdev, 0);
  183. if (!io_res)
  184. return -EINVAL;
  185. /*
  186. * Then the CTL base
  187. */
  188. ctl_res = platform_get_mem_or_io(pdev, 1);
  189. if (!ctl_res)
  190. return -EINVAL;
  191. /*
  192. * And the IRQ
  193. */
  194. irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
  195. return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
  196. pp_info ? pp_info->ioport_shift : 0,
  197. pio_mask, &pata_platform_sht, false);
  198. }
  199. static struct platform_driver pata_platform_driver = {
  200. .probe = pata_platform_probe,
  201. .remove = ata_platform_remove_one,
  202. .driver = {
  203. .name = DRV_NAME,
  204. },
  205. };
  206. module_platform_driver(pata_platform_driver);
  207. MODULE_AUTHOR("Paul Mundt");
  208. MODULE_DESCRIPTION("low-level driver for platform device ATA");
  209. MODULE_LICENSE("GPL");
  210. MODULE_VERSION(DRV_VERSION);
  211. MODULE_ALIAS("platform:" DRV_NAME);